Pivot table and Firefox 3.6,

Hi,
I have find a issue in pivot table,
I have made a very simple pivot table, with filter region enabled.
I’m using jdeveloper 11g release 1.
When you execute it in firefox 3.6 you can't move the columns or rows. If you look at the error console of firefox you find an error in javascript:
Error: x5.ownerDocument.getBoxObjectFor is not a function
Archivo de origen: http://127.0.0.1:7101/UsoCanalesRelacion-ViewController-context-root/afr/partition/gecko/default/opt/core-SHEPHERD-PS1-9296.js
Línea: 6166
If I execute it in explorer 8, it works fine.
Is a bug???
A bad configuration of firefox??
Thanx

You hit the drag and drop bug in FF3.6. D&D in ff3.6 together with adf rich faces does not work right now :-(
Timo

Similar Messages

Pivot tables and charts error: Please load datasource first

hi all,
i am getting a error: please load data source first in rtf template , only for pivot table and charts(note: normal tables and fields i can insert )
Please help me with this.
Thanks and Regards
Prakhar

Well... if you think and try long enough, you may find the solution .
The core problem is to reference to queried values not shown in the table/chart. And there IS a solution.
Just use...
NoFilter(RelativeValue([measure prior year_1];([year/month]);-12))
... instead of
RelativeValue([measure prior year_1];([year/month]);-12)
NoFilter enables RelativeValue to reference to values not present in a table or chart, but available in the report .
From there on, you can define e.g. the starting point of the category axis of a chart by defining a local filter without losing values to be referenced .

MS Excel 2011 pivot tables and Lion

Hi,
I run quite a lot of spreadsheets with pivot tables in MS Excel 2011. With the most recent version of Snow Leopard and all the patches from Microsoft it seemed to be working quite well. The minute after the upgrade to Lion, when I tried to refresh a pivot table Excel crashed, and it is crashing on every single file that I have. I also created new files from scratch, ran a new pivot table, and the second time I open the file it would crash upon refresh.
Apart from being extremely annoying, there seems to be no way around it for the time being; I really hope that with the next release of Office 2011 they fix it. Anyone has similar experiences or ideas?
Thanks,
Claudio

This is absolutely a problem after insalling Lion! Office 11 was a great improvement over office 08 to handle pivot tables and now pivot tables are basically useless on Office 11, running Lion. I confirm that munipulating pivot tables in Excel 11 causes excel to crash every time.

Pivot table and link to account record logs user out of OnDemand

All,
I have created a simple accounts report using a pivot table. I would like the user to be able to drill down on the detail account record. I followed the instructions in Doc ID 454434.1 that describes how to do this without using an action link.
From the example, I created the following URL and inserted it in the account name column under data format using custom text format. The account id is also included, but hidden in the report layout.
http://"@[html]"<a target=_top href=https://secure.crmondemand.com/OnDemand/user/AccountDetail?OMTHD=AccountDetailNav&OMTGT=AccountDetailForm&AccountDetailForm.Id="@">"@"</a>
The link is available in the finished report, but when I run the report from shared custom analyses and click on the link it logs me out of the application and returns me to the sign in page.
Any suggestions are greatly appreciated.
Thanks in advance,
Dan

Here's an attempt to post the entire url again:
"http://"@[html]"<a target=_top href=https://secure.crmondemand.com/OnDemand/user/AccountDetail?OMTHD=AccountDetailNav&OMTGT=AccountDetailForm&AccountDetailForm.Id="@">"@"</a>"

How to fix Action Link Issue in Table and Pivot Table when used Section

My OBIEE Version: OBIEE 11.1.1.6.5
Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
If you want to recreate this issue please follow next steps:
1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
4.     Click preview icon
5.     When you click on action link nothing happens
6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
How to fix this issue?
I'll be grateful for any help!

This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
Upgrade to 11.1.1.6.6 will fix this issue.

How to drill down and keep all my pivot table...

Hello experts!
I have a question about how to drill-down in pivot table. If I drill-down I can see the result in the same place...but it dissapear other bins or measures...
Example:
Pivot table:
A
B
C
If I click in A I can see:
a1
a2
a3
But I don't see B and C.
I would like to see when I click on A:
A
---a1
---a2
---a3
B
C
In my example I have a lot of bins to do drill-down...so it doesn't work for me to create three pivot tables and to do a union...
Is that possible? If you need more details you can post here...
Thank you!

Alex, this isn't another question. It looked like you were asking something different. That's why I said to start another thread. The bottom line is that OBIEE can't do what you are looking for.
But I think what is more important is not necessarily how to do what the OP wants, but what is the best way (read: most efficient, simplest, viable) to achieve the goal.
In this case, I think a better approach to your reporting is to use to Dashboard prompts. The first would be like Vehices (which has Cars, Trucks, Motorcycles, etc. in the drop-down window) and the second, constrained on the first, called Models/Brands (which has values dependent on what is chosen in the first prompt). With "All Choices" checked off in the prompt design, you have all the combinations a user needs to see in the pivot table. If the user chooses "Cars" from the first prompt, and "All Choices" in the second, then he/she will get all the car models displayed in the pivot table. Or, the user could select one particular moded from the start.
In fact, this is how many product web sites are set up. This gives the flexibility to the user and the report looks clean and efficient. You can have the drill down on the particular model (value interaction) if you wish to supply extra data on the particular model chosen.
I think this is the "correct" answer, Alex, though not the answer to the question you posed. Good luck.

Guage and Pivot table uses in OBIEE

Hello Folks,
please help to understand what is PIVOT TABLE and GAUGE in OBIEE answers
in what cases or scenario will this things be used.
and what is CASE in OBIEE, where is it used and what is its use .
thanks in advance
KMR

The pivot table view is an interactive view that allows you to rotate the rows, columns, and section headings to obtain different perspectives of the data. Pivot tables are navigable and drillable, and are especially useful for trend reports.
Gauges are useful for showing performance against goals. Supported gauge types include dial, bar, and bulb-style gauges.
CASE statement is used for conditions, usage is case when x=y dothis end.. Its like IF statement in programming.
- Madan

Issue with null rows and calc measure in pivot table

hello;
id like to ask if anyone encountered a similar behaviour in OBI and if there is woraround for that;
in my BM i have 2 facts tables; i added in BM logical layer a calculated measure (calc_value) ,which is based on 3 other measures coming from these 2 facts tables
:calc_value= value1 / (value2+value3) ; value1 coming from fact1 and value2 / vfalue3 coming from fact2
depending on the chosen dimensions/level in report, the result of the calcuated measure is different ,which is correct;
the lowest level in fact1 and fact2 are customer/product.
in Answers when i select this calculated measure into report, a full outer join gets created, joining these 2 facts tables on all the dimensions that were chosen into the report i.e. in my case year/region/customer/product.
as a result there are null rows created in the db query, if some of these combinations exist in 1st fact table , and do not exist in 2nd fact table and other way round;
when i display result as a table, i can see the calculated measure only on the lines that are common for both fact tables and this is correct;
however - when i create a pivot table, and DO NOT select into the pivot the customer/product (so the lowest level), but still select these items into criteria, then the calc_value is not displayed correctly; instead of the value that would be shown as if calculated at the higher level i.e. year/region, simply 0 is displayed;
i was wondering how this can be corrected, so that OBI displayes in pivot the calc_value as of the level which is shown in pivot (so if i show in pivot year/region/customer/product -> then at this level; if i put customer/product to 'exclude' in pivot, then the level should be year/region);
i noticed if i filter out at least 1 combination that create null rows then the values are shown correctly in pivot (but the db query still contains null rows), so i tend to think this is presentation issue, not design;
id appreciate any tips on how to resolve this issue
OBI vesion: 10.1.3.2
thx
rgds

Hi write a case statement during logical column such that when value is present it takes value else zero for call the values i.e. value1, value2, value3.
i.e. case when column1 is not null then column1 else 0.
Then, do the calculation.
Hope this might helpful for you.

BI Publisher Pivot Table or Cross Tab

Hai All,
I have a doubt in developing a Matrix report in XML. I have developed a matrix report in RDF and the output is coming fine in RDF. I have generated the XML file which looks like this. I need to develop the report which displays employee details followed by the allowance which are dynamic.
- <XXHRPRF>
- <LIST_G_SUMRESULT_VALUE>
- <G_SUMRESULT_VALUE>
- <LIST_G_EMPLOYEE_NUMBER>
- <G_EMPLOYEE_NUMBER>
<EMPLOYEE_NUMBER>100026</EMPLOYEE_NUMBER>
<PERSON_ID>80</PERSON_ID>
<NATIONALITY>USA</NATIONALITY>
<NATIONAL_IDENTIFIER />
<UNIFIED_ID />
<FULL_NAME>Thomas H Mathew</FULL_NAME>
<ORGANIZATION_NAME>Corporate Affairs</ORGANIZATION_NAME>
<PENSION_FUND_ID />
<CS_SNO>1</CS_SNO>
<CF_PENSION_CONTRIBUTION>3637.5</CF_PENSION_CONTRIBUTION>
<CP_PENSION_COMP_CONTR>10912.5</CP_PENSION_COMP_CONTR>
<CP_TOTAL_SALARY>72750</CP_TOTAL_SALARY>
<CF_TOTAL_CONTRIBUTION>14550</CF_TOTAL_CONTRIBUTION>
- <LIST_G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>1</TAG>
<ELEMENT_NAME>Basic Salary</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>39650</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>2</TAG>
<ELEMENT_NAME>Housing Allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>25000</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>3</TAG>
<ELEMENT_NAME>Child allowance</ELEMENT_NAME>
<LIST_G_PERSON_ID />
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>4</TAG>
<ELEMENT_NAME>Social allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>700</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>5</TAG>
<ELEMENT_NAME>Excess Allowance</ELEMENT_NAME>
<LIST_G_PERSON_ID />
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>6</TAG>
<ELEMENT_NAME>Additional</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>7400</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
</LIST_G_ELEMENT_NAME>
</G_EMPLOYEE_NUMBER>
- <G_EMPLOYEE_NUMBER>
<EMPLOYEE_NUMBER>100030</EMPLOYEE_NUMBER>
<PERSON_ID>82</PERSON_ID>
<NATIONALITY>Canada</NATIONALITY>
<NATIONAL_IDENTIFIER />
<UNIFIED_ID />
<FULL_NAME>Sara Wilson</FULL_NAME>
<ORGANIZATION_NAME>Human Resources</ORGANIZATION_NAME>
<PENSION_FUND_ID />
<CS_SNO>2</CS_SNO>
<CF_PENSION_CONTRIBUTION>1203.75</CF_PENSION_CONTRIBUTION>
<CP_PENSION_COMP_CONTR>3611.25</CP_PENSION_COMP_CONTR>
<CP_TOTAL_SALARY>316575</CP_TOTAL_SALARY>
<CF_TOTAL_CONTRIBUTION>4815</CF_TOTAL_CONTRIBUTION>
- <LIST_G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>1</TAG>
<ELEMENT_NAME>Basic Salary</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>19600</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>2</TAG>
<ELEMENT_NAME>Housing Allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>22500</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>3</TAG>
<ELEMENT_NAME>Child allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>600</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>4</TAG>
<ELEMENT_NAME>Social allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>800</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>5</TAG>
<ELEMENT_NAME>Excess Allowance</ELEMENT_NAME>
<LIST_G_PERSON_ID />
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>6</TAG>
<ELEMENT_NAME>Additional</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>3075</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
</LIST_G_ELEMENT_NAME>
</LIST_G_EMPLOYEE_NUMBER>
</G_SUMRESULT_VALUE>
</LIST_G_SUMRESULT_VALUE>
<CF_PERIOD>MAR-2009</CF_PERIOD>
- <XXHRPRF>
I need to develop a cross tab format in RTF using template builder. Can we get this in matrix report using the standard wizard given in template builder or else it should be done manual. If it can be done through wizard can u please explain the process.
And one more think what is the latest version of template builder available. In few cases its given as pivot table and in few its given as cross tab. I confused by that.
This seems to be basic doubt, but please guide me.
Regards

i,
I am developing cross tab report with group in BI Publisher(i.e matrix with group above report in report builder).
My req.is
Country1
region1 region2 region3 --- (level1 column)
d1 d2 d3 d1 d2 d3 d1 d2 d3 --(level2 column)
Row1 10 15 18 24 38 40 36 35 78 --data
Row2 -- -- -- --- --- -- - -- -- --
regions(level1 columns) and d1,d2,d3(level2 columns) are data depenent on XML data.
d1,d2 d3 may change in number based on data.Also we have page break on country.
We could able to achieve in report builder but in Bi Publisher we are unable to achieve the same.
Wizard in BI Publisher gives only one level of measure(region) only.
Currently we are using BI Publisher template builder version 10.1.3.2.1
Need help in this regard ASAP.
Thanks in advance.

Excel 2010 Pivot Table VBA Not Refreshing Table

My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
comes in.
So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
I tried:
ActiveSheet.PivotTables("WO Pivot").RefreshTable
and
ActiveWorkbook.RefreshAll
And these did not work.
I also tried recording a macro for the manual steps to refresh and got:
ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
This does not work either.
The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
e.g.:
With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
.Orientation = xlRowField .Position = 2
.Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
End
With Why isn't this working? Is there another way to refresh pivot table data in 2010?
Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.

The solution above didn't work for me, but the following did the trick:
ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
Cheers,
Marco.

Trying to get Pivot table drop down list to affect bar chart below it

Hi,
In BI Answers I have a pivot table and a bar chart below it. At run time, I can choose a value from the
drop down list for the pivot table, but the bar chart below it doesn't react to the new value chosen
from the pivot table.
Does anyone know a way to get the bar chart to receive new values, permeating down from a table view
pivot table above it on the same report (apart from using prompted filters for the whole report).
Many thanks,
Jake

you may want to try this...
in you bar chart criteria, set prompted filters of all the dimension fields u want from the pivot table.
in the pivot table, set action links on these dimension columns and loop it back to the current dashboard page.
now, when u click on a value on the pivot table, the dim values of this will be passed as a parameter to the the bar chart filter set and your bar chart will change accordingly...
-sharath

Link on a pivot table to see the data behind summary figures

Hello,
I need your support because I am not sure if what I need to do is possible.
I have a flattened table and I have created several pivot tables and slicers based on it. Once I have created the scenario I want to analyze (using slicers), I get some summarized figures in the pivot table. What I need is a way to put a link on those figures
to allow me to see the data associated to them.
For instance, if after applying some slicer I get one figure 3, another 2 and grand total 5, I need to see the 2, 3 or 5 records behind them filtered in the existing data (not just double-click and create a new worksheet) .
Thanks in advance for your comments,
Parseval

Hyperlinks in pivots are not supported.
There is some limited drill through functionality built into pivots, but you can't do a lot to configure how it behaves.
If it is enabled, which I believe it is by default, you show be able to double click on a aggregated total and a new sheet will pop up with the underlying records. If your measure is a relatively simple aggregation and the underlying data is a
flat file then this should work pretty well. The results can be unexepected if the measures are complex or there are a lot of underlying relationships in the model.
The other possibility is to use the pivots ability to collapse/expand fields. If you can put the row ID for the individual records into the rows of your pivot beneath what ever aggregated row you are currently displaying, then you should be able to expand
into the rows and see the lower levels of the "hierarchy". By default, all rows in you pivot would be collapsed, but then a user could click the little plus sign next to the row label and expand it to see the underlying records.

Error while creating pivot table in recording macro

im getting error " Run time error 1004: unable to get the pivottables property of the worksheet class
below is the code
Sub Macro16()
' Macro16 Macro
' Keyboard Shortcut: Ctrl+t
    ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
        "Premium Data!R1C1:R25000C11", Version:=xlPivotTableVersion14). _
        CreatePivotTable TableDestination:="", TableName:= _
        "PivotTable14", DefaultVersion:=xlPivotTableVersion14
    Sheets("Premium Pivot").Select
    Cells(2, 2).Select
    With ActiveSheet.PivotTables("PivotTable14").PivotFields("RM")
        .Orientation = xlRowField
        .Position = 1
    End With
    ActiveSheet.PivotTables("PivotTable14").AddDataField ActiveSheet.PivotTables( _
        "PivotTable14").PivotFields("KL"), "Sum of KL", xlSum
End Sub

You have TableDestination:="" which means you are not specifying a destination and therefore a new sheet gets created and it becomes the active sheet. You are selecting Sheets("Premium Pivot") which will not
have the pivot table and the remainder of the code references the ActiveSheet.
Either delete the line Sheets("Premium Pivot").Select or set the table destination like the following.
TableDestination:="'Premium Pivot'!R3C1"      (Note the single quotes around the sheet name that contains a space. Edit the range on the destination to suit your requirements.)
Regards, OssieMac

Adding a pivot table while creating report in BI publisher

Hi all,
I have been working on OBIEE and i need to create a multipage report. I have created a report in BI Dashboard using pivot table and i like to create the same pivot table (as pdf report) by using BI publisher.
But i am unable to add pivot table in the rtf file that is used as template.
When i am creating a template in rtf format, it has only three option either you can add table or form or Cross tab. I have tried to add the pivot table but i didn't find any way to add that.
Pls suggest me to solve this.
Thanks
Ashok

Please look at the hyperlinks description in the rtf template section of the report designer guide. It should get you started.

How to create a graph for the exact values in pivot table

hi all,
how can i create a graph exactly that shows pivoted values. i created one pivot table and deleted the table view. when i am creating the graph it is not showing the graph for pivot table values.

for that you need to edit the pivot table properties and then select graph pivot results tab in the top middle .. hope this helps

Pivot table and Firefox 3.6,

Similar Messages

Maybe you are looking for