Pivote Table

I have two measurement columns in my pivot table. One has values that need to roll up into an over all row total for a customer. A second column has one value that repeats but in the pivot table it totals all the rows as well but I just need the one repeating value to show once. Then have a grand total at the bottom of the table. How might I over come this obstacle? Is there a group by function like in SQL?

the following logic display the sum only once per contact.
case when rank (Opportunity."Created Date" by Contact."Contact ID") = 1 then sum(Opportunity."Opportunity Revenue" by Contact."Contact ID" ) else null end
You could create something simularly. Hopefully, this is waht you are looking for.

Similar Messages

IF statement in Calculated Field for Share point, doesnt calculate sum in my Excel Pivot table.

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Can any one tell how to create pivot table

Hi ,
Am trying to create a pivot tabel in the MDM Import Manager. Iam able to see the preview of the pivot table which i want to create. But when i try to click "OK" button, an error message getting displayed like...
"The new table cannot be created because the data source is not updatable.You may need the data source to an updatable format such as Microsoft Access before proceeding".
Due to the above error am not able to create pivot table, plz let me know if any one know how to solve this problem
Thanks & regards
Praveen k

Hi Praveen ,
The solution to your problem is -
The data source must be updateable in order for MDM to
create the new pivot or reverse pivot table. However, you can still
perform the steps leading up to table creation including the preview
even on a data source that is not updateable, so that you can explore
pivoting or reverse pivoting as a transformation option. If you then
decide you want to actually create the new table, convert the data
source into a format that is updateable (such as Microsoft Access) and
perform the pivot or reverse pivot on the new data source.
To create a pivot table, you must identify the source fields that
participate in the pivot, which ones contain metadata and which ones
contain data, which ones must be combined, the one-to-one
correspondence between metadata and data fields and/or field
combinations, and the key field or fields.
To create a pivot table:
1. In the drop-down list of source tables, make sure the table you want to
pivot is the current source table.
2. In the Source Hierarchy tree, select all the field nodes corresponding to
both the metadata fields and the data fields by which you want to pivot.
3. Right-click on one of the nodes and choose Create Pivot Table from the
context menu, or choose Source > Create Pivot Table from the main
menu
4. MDM opens the Create Pivot Table dialog
5. In the Key Fields dual-list drop-down control, move one or more fields
from the Available Fields list to the Selected Fields list to identify the
key fields on which to perform the pivot
6. In the dual-list control of fields, drag-and-drop the data fields from the
Field Values Become Field Names list to the Field Values Become
Field Values list
7. If necessary, select two or more fields in either list that must be
combined into a field combination, and click on the Combine button, or
right-click on one of the fields and choose Combine from the context
menu
8. If necessary, drag-and-drop fields or field combinations within each list
to create the one-to-one correspondence between metadata fields and
data fields.
9. Click on the Preview button to display a preview of the first ten records
of the pivot table
10. When you have verified that the pivot operation you have defined will
have the desired effect, click OK to close the Create Pivot Table dialog.
11. The MDM Import Manager creates a new table named table <Pivot>
in the data source (where table is the name of the original source
table).
12. In the drop-down list of source tables, select the newly created pivot
table on which to perform subsequent import processing.
Hope that helps ...
Regards
Deepak Singh

Can I 'explain' data in a pivot table?

Hi All.
I have a request that has baffled me.
I need a way to use 'text' to describe the results of a report. If I were doing a simple report,
this would be a non-issue. Here are my hurdles:
I have a report that uses a Union via Set Operations (so I'm combining two result sets).
The results are then shown in a pivot table.
Within the pivot table, variances were created using 'New Calculated Item' under measures.
I want to be able to display in a narrative, or some other magical technique, the results of theses calculated items.
Data Example:
<pre>
Date1 Date2 Variance Variance%
Total Sales 10 20 10 50.00
Sales have increased 50% compared with last quarter. (<- desired result)
Today, I can show @1, @2 etc, but it only shows the columns under 'Date 1'.
Any help is greatly appreciated!!
Cindy

First, if you design a report correctly (e.g., accurate and descriptive headers, etc.), you greatly reduce the need for an "explanation of data." It should be intuitive. If it is confusing to understand, the design of the report should be looked at. (Is this report illustrating what the user needs to see? Should I use a graph instead of a table or vice-versa? Am I reporting on the right metrics?)
That being said, it may be helpful at times to have a narrative to give an overall view of what the report displays. For this, you have the Narrative View to explain whatever might make the report more useful to the end-user. For example, you may have them note certain conditions and what that would mean, etc. (Conditional formatting would be great for this, unless you are considering cross-column conditioning in which case conditional formatting doesn't work.*)
But if you are looking for row-by-row explanations where you use the data in the row as part of the "explanation" (as inferred by your inclusion of @1 and @2, etc. in your question), then I think you may be trying to please your end-users a bit too much. Perhaps I have misunderstood you, so I shall end here and wait for your response.
*Until 11g, that is. There are also workarounds...

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

How to update ADF VO object to refresh the data in ADF Pivot table

I need to know how to update the View object so that the date in pivot table is refreshed/updated/filtered.
here are the steps I performed to create ADF pivot table application using VO at design time.
1) created a collection in a Data Control (ViewObject in an ApplicationModule) that provides the values I wanted to use for row and column labels as well the cell values (Used the SQL query)
2) Dragged this collection to the page in which wanted to create the pivot table
3) In the pivot table data binding editor specified the characteristics of the rows (which attribute(s) should be displayed in header), the columns (likewise) and the cells.
Now, I have a requirement to update/filter the data in pivot table on click of check box and my question is how to I update the View object so that the date in pivot table is refreshed/updated/filtered.
I have got this solution from one of the contact in which a WHERE clause on an underlying VO is updated based upon input from a Slider control. In essence, the value of the control is sent to a backing bean, and then the backing bean uses this input to call the "filterVO" method on the corresponding AppModule:
but, I'm getting "operationBinding" object as NULL in following code. Please let me know what's wrong.
here is the code
Our slider component will look like
<af:selectBooleanCheckbox label="Unit" value="#{PivotTableBean.dataValue}"
autoSubmit="true" />
The setDataValue() method in the backing bean will get a handle to AM and will execute the "filterVO" method in that, which takes the NumberRange as the input parameter.
public void setDataValue(boolean value) {
DataValue = value;
BindingContainer bindings = getBindings();
OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("filterVO");
Object result = operationBinding.execute();
The filterVO method in the AMImpl.java will get the true or false and set the where Clause for the VO query to show values.
public void filterVO(boolean value) {
if (value != null) {
ViewObjectImpl ibVO = getVO1();
ibVO.setWhereClause("PRODUCT_TOTAL_REVENUE(+) where rownum < 10");
ibVO.executeQuery();
}

Did you define a filterVO action in your pagedef.xml file?
You might want to read on how to access service method from a JSF Web Application in the ADF Developer Guide for 10.1.3 chapter 8.5

Check if refreshing data in pivot table was finished

Hello guys,
This is my first post here so forgive if I'm asking in wrong place.
Maybe you can help me or give me some hint how can I check if data in pivot tables refresh event was finished.
So I'm using excel plugin that allows to load excel spread sheets from external source e.g application server,
in this reports there are define some pivot tables with olap connections. When report is opened data is automatically refreshed,
what I'm trying to do is somehow check if this refresh was finished and start manipulating data in c# but I'm not able to check
if refresh was finished or it's still going.
I found that query table has refreshing flag which indicates if some query is running. But I'm not able to get to querytable object or to listobjects object, I'm using excel 2013 and only when I added sql database connection to sheet there was value
in listobject object but still querytable was empty,
What I'm doing wrong ?
public void refrestTest()
Excel.Sheets test= excelApp.ActiveWorkbook.Worksheets;
foreach (Excel.Worksheet displayWorksheet in test)
if (displayWorksheet.ListObjects.Count > 0)
var pp1 = displayWorksheet.ListObjects.get_Item(1).QueryTable.Refreshing;

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

UI performance testing of pivot table

Hi,
I was wondering if anyone could direct me to a tool that I can use to do performance testing on a pivot table. I am populating a pivot table(declaratively) with a data source of over 100,000 cells and I need to record the browser rendering time of the pivot table using 50 or so parallel threads(requests). I tried running performance tests using JMeter, but that didn't help.
This is what I tried so far with JMeter:
I deployed the application in the integratedweblogicserver and specify the Url to hit in JMeter ( http://127.0.0.1:7101/PivotTableSample-ViewController-context-root/faces/Sample) and added a response assertion for the response code 200. Although I am able to hit the url successfully, the response I get is a javascript with a message that says "This is the loopback script to process the url before the real page loads. It introduces a separate round trip". When I checked in firebug, it looks like request redirect of some sort happens from this javascript to another Url (with some randomly generated parameters) which then returns the html response of the pivot table. I am unable to hit that Url directly as I get a message saying "session expired". It looks like a redirect happens from the first request and then session is created for that request and a redirect occurs.
I am able to check the browser rendering time of the pivot table in firebug (.net tab), but that is only for a single request. I'd appreciate it if anyone could guide me on this.
Thanks
Naveen

I found the link below that explains configuration of JMeter for performance testing of ADF applications(Although I couldn't find a solution to figure out the browser rendering time for parallel threads).
http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Edited by: Naveen Ramanathan on Oct 3, 2010 10:24 AM

Removing (blank) from Pivot Tables Populated from Data Connection

It took me a long while to fix this one (and a long time to search, because it's a funny one to try to use boolean logic for) and I thought I would share because I've seen a score of folks out there looking for this.
If you have a pivot table with blank values in the row/column area instead of values, Excel automatically populates the cell with (blank). The word blank shows up in any cell that doesn't have a value, but what if you don't want all those ugly (blank)
values showing up in your report?
If you're pulling the data from an outside source, like a SQL server (in my case from the Project Server Reporting database) then you can't just change the source data, so you seem pretty stuck.
My coworker and I came up with the following fix:
Select the entire sheet. Use conditional formatting to find all cells that contain the text (blank). Then for the format, go to "Number" and "Custom". In the custom field, enter ;;;. Apply the conditional formatting and those pesky
(blank) values turn into real blanks. This even works when copying pasting the data into another sheet or application. And if the value changes the next time you refresh your data, the new data appears.
I found this very valuable in my reporting and just wanted to put it out there for the rest of the community.

Hi,
Thank you for sharing your experience and post here.

Pivot Table Report Issue

Hi,
I have created a Pivot Table report (I use them all the time in Excel) as one of my rows...I am using a field that is a formula. When I look at the pivot table results there is a sum by this "row category"...all total 1726 items (correct # of total items' but the sum by each of the 4 items is wrong...when I drill (I can only drill from a higher level)...I get the detail of the 1726 items correctly...but if I do a pivot in Excel off the detail I get a different number in the 4 categories (actually the correct summary data)....HOW do I fix this...we really want to use the power of the report...but with such a large error it is difficult to trust the results of the report.
Report
Source Type     MAG Created Year     Parent Account     Target Market     # of Accounts
Marketing     2004     Unspecified     Key Account     2,521
          Quanta Services Inc     Key Account     1
     2005     Unspecified     Key Account     388
          Vipar Heavy Duty     Key Account     29
     2006     Unspecified     Key Account     824
     2007     Unspecified     Key Account     838
          Domino's Pizza     Key Account     9
     2008     Unspecified     Key Account     582
Marketing                    5,192
Grand Total                    5,192
When you drill down...for instance...the data for 2007 Unspecified is 358 NOT 838....
Please assist!!! ASAP

It is very difficult to troubleshoot a report without seeing it, but it looks to me like you have a problem with your aggregation rules... each column has an aggregation rule, and a pivot table measure can also have an aggregation rule... sometimes, depending on the formula and columns that make up your formula, the aggregation rules can cause seemingly incorrect totals because the data is aggregated on the table and then re-aggregated on the pivot table.
If you would like, you may email me directly and I will see if I can help further.
My email is in my profile.
Mike L

Pivot Table - Calculate Variance - Hidden Fields?

I need some help adding a target value field inside a pivot table in excel.
Here is what my current pivot table looks like.
Regions                 1 year - Actual              1 year - Target??
Difference
                  (April 2013 to MArch 2014)
(Target - Actual)?
Region1                $6,355,696.75
Region2                $6,775,309.87
Region3                $2,230,424.76
Regions expand into managers which in turn expand to consultants.
What I want to do is add a column for target values of the 3 different regions and then create another calculated field that will show the difference between the target and actual values.
Can this be done without writing any stored procedures in SQL? I want to do this in excel itself.
The target values are not calculated so can we store them in hidden fields or something in the pivot or excel?

1. Click anywhere in Pivot and go to Options tab > Formulas > Calculated Field.
2. Create a calculated field called Target (whatever name your choose). If your target is say 7000000, put this value in Formula field. You may put it with or without =
3. Now after this, you can once again create a new Calculated Field. Let's say this is Variance. If you variance is Target - Actual, put this as =Target-Actual in Calculated Field.
4. Your pivot will have whatever you wanted.

Excel Pivot Table with Date Hierarchies - query performance degradation

For the sake of this explanation, I’m going to try and keep it simple. Slicing the data by additional dimensions only makes the issue worse. I’ll keep this description to one fact table and three dimensions. Also, I’m fairly new to SSAS Tabular; I’ve worked
with SSAS Multidimensional in the past.
We’ve got a fact table that keeps track of bill pay payments made over time. Currently, we only have about six months of data, with the fact row count at just under 900,000 rows. The grain is daily.
There is an Account dimension (approx. 460,000 rows), with details about the individual making a payment.
There is a Payment Category dimension (approx.. 35,000 rows), which essentially groups various Payees into groups which we like to report on: Automobile Loan, Mortgage, Insurance, etc.
There is the requisite Date dimension (exactly 62093 rows-more days than we need?), which allows visibility as to what is being paid when.
Using this DW model, I’ve created a SSAS BISM Tabular model, from which Excel 2010 is ultimately used to perform some analysis, using Pivot Tables. In the tabular model, for easier navigation (doing what I’ve always done in SSAS MultiDimensional), I’ve created
several Date Hierarchies, Year-Month, Year-Quarter-Month, etc.
There are currently only two measures defined in the Tabular model: one for the “Sum of PaymentAmount”; one for the “PaymentsProcessed”.
OK, in Excel 2010, using a Pivot Table, drag the “Sum of PaymentAmount” measure to the Values section, next to/under the PivotTable Field List. Not too exciting, just the grand total of all Payments, for all time.
Drag the “YearMonth” hierarchy (from the Date dimension) to the “Column Labels” section. After expanding the year hierarchy to see the months, now the totals are for each of the months, for which we have data, for June through November, 2013.
Drag the “PaymentCategory” (from the Payment Categories dimension) to the “Report Filter” section. Filter accordingly: We just want to see the monthly totals for “Automobile Loans”.
Now, some details. Drag the “AccountSK” (hiding the actual account numbers) to the “Row Labels” section. This shows all accounts that have made Automobile Loan payments over the last six months, showing the actual payment amounts.
So far, so good. Remember, I’m using a Date Hierarchy here, in this case “YearMonth”
Now, if any of the other attributes on the Account dimension table, say “CreditScore”, or “LongName”, are subsequently dragged over to the “Row Lables” section, under the “AccountSK”, the results will never come back, before timing out or by giving up and
pressing ESCape!
If this exact scenario is done by removing the Date Hierarchy, “YearMonth” from the “Column Labels” and replace it with “Year” and “MonthName” attributes from the Date dimension, these fields not being in any sort of hierarchy, adding an additional “Account”
attribute does not cause any substantial delay.
What I’m trying to find out is why is this happening? Is there anything I can do as a work around, other than what I’ve done by not using a Date Hierarchy? Is this a known issue with DAX and the query conversion to MDX? Something else?
I’ve done a SQL Profiler trace, but I’m not sure at this point what it all means. In the MDX query there is a CrossJoin involved. There are also numerous VertiPaq Scans which seems to be going through each and every AccountSK in the Account dimension, not
just the ones filtered, to get an additional attribute (About 3,600 accounts which are “Automobile Loan” payments.).
Any thoughts?
Thanks! Happy Holidays!
AAO

Thanks for your reply Marco. I've been reading your book, too, getting into Tabular.
I've set up the Excel Pivot Table using either the Year/MonthName levels, or the YearMonth hierarchy and then adding the additional attribute for the CreditScore.
Incidentally, when using the YearMonth hierarchy and adding the CreditScore, all is well, if the Year has not been "opened". When this is done, I suspect the same thing is going on.
From SQL Profiler, each of the individual MDX queries below (formatted a bit for readability).
Thanks!
// MDX query using separate Year and MonthName levels, NO hierarchy.
SELECT
NON EMPTY
Hierarchize(
DrilldownMember(
CrossJoin(
{[Date].[Year].[All],[Date].[Year].[Year].AllMembers},
{([Date].[MonthName].[All])}
,[Date].[Year].[Year].AllMembers, [Date].[MonthName]
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON COLUMNS,
NON EMPTY
Hierarchize(
DrilldownMember(
CrossJoin(
{[Accounts].[AccountSK].[All],[Accounts].[AccountSK].[AccountSK].AllMembers},
{([Accounts].[CreditScore].[All])}
,[Accounts].[AccountSK].[AccountSK].AllMembers, [Accounts].[CreditScore]
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON ROWS
FROM [PscuPrototype]
WHERE ([PaymentCategories].[PaymentCategory].&[Automobile Loan],[Measures].[Sum of PaymentAmount])
CELL PROPERTIES VALUE, FORMAT_STRING, LANGUAGE, BACK_COLOR, FORE_COLOR, FONT_FLAGS
// MDX query using separate YearMonth hierarchy (Year, MonthName).
SELECT
NON EMPTY
Hierarchize(
DrilldownMember(
{{DrilldownLevel({[Date].[YearMonth].[All]},,,INCLUDE_CALC_MEMBERS)}},
{[Date].[YearMonth].[Year].&[2013]},,,INCLUDE_CALC_MEMBERS
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON COLUMNS,
NON EMPTY
Hierarchize(
DrilldownMember(
CrossJoin(
{[Accounts].[AccountSK].[All],[Accounts].[AccountSK].[AccountSK].AllMembers},
{([Accounts].[CreditScore].[All])}
,[Accounts].[AccountSK].[AccountSK].AllMembers, [Accounts].[CreditScore]
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON ROWS
FROM [PscuPrototype]
WHERE ([PaymentCategories].[PaymentCategory].&[Automobile Loan],[Measures].[Sum of PaymentAmount])
CELL PROPERTIES VALUE, FORMAT_STRING, LANGUAGE, BACK_COLOR, FORE_COLOR, FONT_FLAGS
AAO

Data is not coming in pivot table

Hi,
i made a request using some measures,month (time) and some other columns but data is not coming when i m working on pivot table though its working in case of table and graph.
please help me out..
thanks

Hi,
well data is populating in tables and chart in Oracle BI and i also executed the same query in sql server 2005 and got the desired result.
the reason to show the results into pivot table is -- i want to show the result(measures) with time dimension and some other dimensions so i have to use this pivot table or if u have some other solution please let me know...
thanks
Edited by: user629711 on Nov 20, 2008 11:42 PM

BI Publisher Pivot Table or Cross Tab

Hai All,
I have a doubt in developing a Matrix report in XML. I have developed a matrix report in RDF and the output is coming fine in RDF. I have generated the XML file which looks like this. I need to develop the report which displays employee details followed by the allowance which are dynamic.
- <XXHRPRF>
- <LIST_G_SUMRESULT_VALUE>
- <G_SUMRESULT_VALUE>
- <LIST_G_EMPLOYEE_NUMBER>
- <G_EMPLOYEE_NUMBER>
<EMPLOYEE_NUMBER>100026</EMPLOYEE_NUMBER>
<PERSON_ID>80</PERSON_ID>
<NATIONALITY>USA</NATIONALITY>
<NATIONAL_IDENTIFIER />
<UNIFIED_ID />
<FULL_NAME>Thomas H Mathew</FULL_NAME>
<ORGANIZATION_NAME>Corporate Affairs</ORGANIZATION_NAME>
<PENSION_FUND_ID />
<CS_SNO>1</CS_SNO>
<CF_PENSION_CONTRIBUTION>3637.5</CF_PENSION_CONTRIBUTION>
<CP_PENSION_COMP_CONTR>10912.5</CP_PENSION_COMP_CONTR>
<CP_TOTAL_SALARY>72750</CP_TOTAL_SALARY>
<CF_TOTAL_CONTRIBUTION>14550</CF_TOTAL_CONTRIBUTION>
- <LIST_G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>1</TAG>
<ELEMENT_NAME>Basic Salary</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>39650</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>2</TAG>
<ELEMENT_NAME>Housing Allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>25000</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>3</TAG>
<ELEMENT_NAME>Child allowance</ELEMENT_NAME>
<LIST_G_PERSON_ID />
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>4</TAG>
<ELEMENT_NAME>Social allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>700</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>5</TAG>
<ELEMENT_NAME>Excess Allowance</ELEMENT_NAME>
<LIST_G_PERSON_ID />
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>6</TAG>
<ELEMENT_NAME>Additional</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>7400</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
</LIST_G_ELEMENT_NAME>
</G_EMPLOYEE_NUMBER>
- <G_EMPLOYEE_NUMBER>
<EMPLOYEE_NUMBER>100030</EMPLOYEE_NUMBER>
<PERSON_ID>82</PERSON_ID>
<NATIONALITY>Canada</NATIONALITY>
<NATIONAL_IDENTIFIER />
<UNIFIED_ID />
<FULL_NAME>Sara Wilson</FULL_NAME>
<ORGANIZATION_NAME>Human Resources</ORGANIZATION_NAME>
<PENSION_FUND_ID />
<CS_SNO>2</CS_SNO>
<CF_PENSION_CONTRIBUTION>1203.75</CF_PENSION_CONTRIBUTION>
<CP_PENSION_COMP_CONTR>3611.25</CP_PENSION_COMP_CONTR>
<CP_TOTAL_SALARY>316575</CP_TOTAL_SALARY>
<CF_TOTAL_CONTRIBUTION>4815</CF_TOTAL_CONTRIBUTION>
- <LIST_G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>1</TAG>
<ELEMENT_NAME>Basic Salary</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>19600</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>2</TAG>
<ELEMENT_NAME>Housing Allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>22500</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>3</TAG>
<ELEMENT_NAME>Child allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>600</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>4</TAG>
<ELEMENT_NAME>Social allowance</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>800</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>5</TAG>
<ELEMENT_NAME>Excess Allowance</ELEMENT_NAME>
<LIST_G_PERSON_ID />
</G_ELEMENT_NAME>
- <G_ELEMENT_NAME>
<TAG>6</TAG>
<ELEMENT_NAME>Additional</ELEMENT_NAME>
- <LIST_G_PERSON_ID>
- <G_PERSON_ID>
<RESULT_VALUE>3075</RESULT_VALUE>
</G_PERSON_ID>
</LIST_G_PERSON_ID>
</G_ELEMENT_NAME>
</LIST_G_ELEMENT_NAME>
</LIST_G_EMPLOYEE_NUMBER>
</G_SUMRESULT_VALUE>
</LIST_G_SUMRESULT_VALUE>
<CF_PERIOD>MAR-2009</CF_PERIOD>
- <XXHRPRF>
I need to develop a cross tab format in RTF using template builder. Can we get this in matrix report using the standard wizard given in template builder or else it should be done manual. If it can be done through wizard can u please explain the process.
And one more think what is the latest version of template builder available. In few cases its given as pivot table and in few its given as cross tab. I confused by that.
This seems to be basic doubt, but please guide me.
Regards

i,
I am developing cross tab report with group in BI Publisher(i.e matrix with group above report in report builder).
My req.is
Country1
region1 region2 region3 --- (level1 column)
d1 d2 d3 d1 d2 d3 d1 d2 d3 --(level2 column)
Row1 10 15 18 24 38 40 36 35 78 --data
Row2 -- -- -- --- --- -- - -- -- --
regions(level1 columns) and d1,d2,d3(level2 columns) are data depenent on XML data.
d1,d2 d3 may change in number based on data.Also we have page break on country.
We could able to achieve in report builder but in Bi Publisher we are unable to achieve the same.
Wizard in BI Publisher gives only one level of measure(region) only.
Currently we are using BI Publisher template builder version 10.1.3.2.1
Need help in this regard ASAP.
Thanks in advance.

Unable to group with page breaks when creating pivot table in BIP

Hi,
I'm using BIP 10.1.3.4 and I need some assistance with report with pivot tables. I used the wizard to successfully create the pivot table but i need to add a group and break the page on that group. Is there any way i can do this?
Thanks.

HI Bala,
I am Durgaprasad from Pune-INDIA, working as a OBIEE developer, I have one query which I mentioned below can you please go threw it.
I have done migration Discoverer Admin EUL Layer into OBIEE repository using below methodology.
Navigate to the <installdrive>\OracleBI\server\Bin directory. There are two important files in this directory: the migration assistant executable file named MigrateEUL.exe and a properties configuration file named MigrationConfig.properties.
Could you please help me how to migrate discoverer plus workbooks and worksheets into OBIEE Answers?
go through below link, It will show navigation steps for migrating of EUL from Discoverer to OBIEE.But i need migration of workbooks and worksheets from Discoverer into OBIEE Answers.
http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/discomigration/migrate_disco_biee.htm
This is very great full help to me …
Advance thanks for your suggestions.
Regards
Duraga Prasad.

Excel 2010 Pivot Table VBA Not Refreshing Table

My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
comes in.
So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
I tried:
ActiveSheet.PivotTables("WO Pivot").RefreshTable
and
ActiveWorkbook.RefreshAll
And these did not work.
I also tried recording a macro for the manual steps to refresh and got:
ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
This does not work either.
The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
e.g.:
With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
.Orientation = xlRowField .Position = 2
.Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
End
With Why isn't this working? Is there another way to refresh pivot table data in 2010?
Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.

The solution above didn't work for me, but the following did the trick:
ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
Cheers,
Marco.

Pivote Table

Similar Messages

Maybe you are looking for