Pivoting records for reporting using streams

Hi
I would like to use streams for pivoting a records.
I have a table called employees
Dept Name
10 Larry
10 Ray
10 Philips
20 Winston
20 Gayle
Whenever records are inserted or updated or deleted in the employee table .
i would to like to pivot the records and populate a employee_report table.
Dept Name(clob feild)
10 Larry,Ray,Philips
20 Winston,Gayle
Pivoting can be done in using straight sql and ETL tools but we want to explore if this can be done using
streams and my version of Oracle is 10.2.0.4 and but open to upgrade to higher versions.
regards

How are you going to pivot it? The result of the COUNT will be 1. What operation will Streams perform at the target database?
Will it subtract from one count and add to another?
How?yes, it will.
I don't tell that is the best solution, but at least it works and easy to implement. And ones again - everything depends on requirements.
that's your source table as I understand:
PRO LINE_NUMBER CUST ORDER_DATE           DELIVERED_DATE
747         733 NWO 02-OCT-2011 13:56:16 12-JAN-2014 13:56:16and after update:
PRO LINE_NUMBER CUST ORDER_DATE           DELIVERED_DATE
737         733 NWO 02-OCT-2011 13:56:16 12-JAN-2014 13:56:16and that is the target structure - let's say airplanes_report table:
before update:
PROGRAM_ID AAL DAL NWO ILC
747        0   0   1   0after update:
PROGRAM_ID AAL DAL NWO ILC
737        0   0   1   0
747        0   0   0   0so, the dml handler would do (by UPDATE on airplanes):
1. take from LCR "old" and "new" program_id value.
2. take "old" (or "new" - doesn't matter) customer_id (NWO in this case) from the same LCR
3. substract 1 from NWO value in airplanes_report table where "old" program_id
4. add 1 to NWO value in airplanes_report table where "new" program_id
that is.

Similar Messages

Where to find 'Exempt' indicator for reporting using ad-hoc query?

I want to run report for a count of exempt and non-exempt employees using ad-hoc query with logical database PNPCE. We maintain the exempt/non-exempt flag on the job.
Thanks
Manish

To meet this exact same requirement at my company. I added an additional table (T5U13) into the logical database. Within transaction SQ02, go to the field group Organizational Assignment, right-click on the field group. Click Node Extras. Click Create icon over on the right-hand side of the screen. Type in the table name T5U13. Use this select statement:
SELECT SINGLE * FROM T5U13
WHERE STELL                = P0001-STELL
    AND ENDDA                = P0001-ENDDA
Then add the fields into your field groups. I also created a local field so I get the word "Exempt" or "Non-Exempt" in my queries instead of "1" or "2" because i can never remember which is which.
Hope this helps!

How to create current version variants for   report using RS_CREATE_VARIANT

Hi experts,
                  When i am using RS_CREATE_VARIANT to create a variant for a standard report then a message is coming that the 'Created variant is not of current version'. .How should i avoid this. If i want to create a variant of current version then what parameters have to populated in the FM.

Hi,
try these..
FASU_RS_CHANGE_CREATED_VARIANT change variant w/o selection screen - client dependent
FASU_RS_CREATE_VARIANT         create variant (w/o selection screen) - client dependent
Arunima

2 WAY FIOS PHONE CONVERSATION RECORDING FOR RESIDENTIAL USE ??

I think it that Fios Phone conversations should be able to be recorded, since it is now digital, by residential users! if I want to have it on all the time, every call, inbound or outgoing is recorded ! if I don't want that, I can push one of the buttons on the key pad and it will turn it on for that one conversation only! If someone wants to give me directions, or has a list of numbers or names and phone numbers for me, this is a great option to have! its long over due by Verizon Program Engineers! it should be included in the Fios Package of features, but hasn't showed up yet and its been years now!! Why the computer doesn't ring instead of the phone, I will never know!! it is long over due too!! Skype, Freetalk, and other programs have both audio and video, and at no cost to user! The telephone as we know it in the past, is a thing of the past! its time to make the system for us!! and Verizon can do that !! thanks, that's my 2 cents on the subject !

NOOOOOOO.
Actually being digital vs analog doesn't effect the ability to record. Get your own device. Last thing we want is conversations being recorded and then demanded under court orders.

Logic like Pivote Table for Report

hi,
I have followin fields in my internal table
Location Tranfer Structure Date         Size
INDIA    /BIC/TS3           03.07.2005   130
NW       /BIC/TS3           03.07.2005   30
NW       /BIC/TS2           02.07.2005   20
NW       /BIC/TS1           01.07.2005   110
UK       /BIC/TS3           03.07.2005   20
UK       /BIC/TS2           02.07.2005   20
UK       /BIC/TS1           01.07.2005   10
And i want to print like
Location T.S         01.07.2005 02.07.2005 03.07.2005
INDIA     /BIC/TS3                          130
NW        /BIC/TS1    110
          /BIC/TS2               20
          /BIC/TS3                          30
UK        /BIC/TS1    10
          /BIC/TS2               20
          /BIC/TS3                          20
Can any 1 help me out for this ?
Also How to how to export data into Excel??
Thanks
cool

you need to use control break statements
at new <location>
write location
endif .
write transfer, structute date size
for excel download use gui_download function.
search the forum for sample coding.
Regards
Raja

SQL help: return number of records for each day of last month.

Hi: I have records in the database with a field in the table which contains the Unix epoch time for each record. Letz say the Table name is ED and the field utime contains the Unix epoch time.
Is there a way to get a count of number of records for each day of the last one month? Essentially I want a query which returns a list of count (number of records for each day) with the utime field containing the Unix epoch time. If a particular day does not have any records I want the query to return 0 for that day. I have no clue where to start. Would I need another table which has the list of days?
Thanks
Ray

Peter: thanks. That helps but not completely.
When I run the query to include only records for July using a statement such as following
============
SELECT /*+ FIRST_ROWS */ COUNT(ED.UTIMESTAMP), TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD') AS DATA
FROM EVENT_DATA ED
WHERE AGENT_ID = 160
AND (TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY')+(ED.UTIMESTAMP/86400)), 'MM/YYYY') = TO_CHAR(SYSDATE-15, 'MM/YYYY'))
GROUP BY TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD')
ORDER BY TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD');
=============
I get the following
COUNT(ED.UTIMESTAMP) DATA
1 07/20
1 07/21
1 07/24
2 07/25
2 07/27
2 07/28
2 07/29
1 07/30
2 07/31
Some dates donot have any records and so no output. Is there a way to show the missing dates with a COUNT value = 0?
Thanks
Ray

Report of result recording for multiple batches in a given time span .

Dear team ,
I am looking for a standard SAP report that gives the details of result recording with all the characteristics for mulitple batches in a given span of time . The MICs will show the actual values recorded for each of the batches.
The colums may be like this
material/batche/lot/quanity/mic1 value/mic2 value/mic 3 value...........
A standard report is prefered and we would also like to have a trend analysis done for the batches .
Looking forward to hearing from you .
Ram

Thanks for the answer Firefighter.... cheked the t code and seems to be useful . But I would like to have the report in the folowing format . Kindly guide.
SN MATERIAL BATCH INSPECTION LOT QUANTITY CHARACTERISTIC 1 CHARACTERISTIC 2 3 4
Ram

Steps for Creating Report using LDB

hellow sirs
can u please tell Step by Step method for creating Reports using LDB method...
if possible with screen Shots..
thanking You
Rahul

Hi,
Please refer the code below:
Use the PNP LDB for this program,
*: Report: ZP_POSTCODE                                                :
*: Date : 2004                                                       :
*: Description: Displays report of employees by postcode area,         :
*:              includes current travelling allowances (i.e. parking   :
*:              permit or transport card etc..)                        :
*: Use:         Help encourage the use of car sharing and public       :
*:              transport where appropriate.                           :
REPORT zp_postcode.
type-pools: slis.                                      "ALV Declarations
NODES: pernr.
INFOTYPES: 0000, 0001, 0002, 0006, 0008, 0014, 0105, 0121.
SELECTION-SCREEN BEGIN OF BLOCK pcode WITH FRAME TITLE text-s01.
SELECT-OPTIONS: so_pcode FOR p0006-pstlz.
SELECTION-SCREEN END OF BLOCK pcode.
TYPES: BEGIN OF t_output,
pernr       TYPE p0001-pernr,   "personnel name
anredtxt    TYPE t522t-atext,   "title (based on p0002-anred)
fname       TYPE p0002-vorna,   "first name
lname       TYPE p0002-nachn,   "last name
orgtx       TYPE t527x-orgtx,   "dept
fte         TYPE p0008-bsgrd,   "fte
parking(20) TYPE c,
payslip     TYPE t526-sachn,        "payslip address
telno       TYPE p0105-usrid_long, "tel number(p0105-usrty = 0020)
email       TYPE p0105-usrid_long, "email (p0105-usrty = MAIL)
postcode    type p0006-pstlz,
END OF t_output.
DATA: it_output TYPE STANDARD TABLE OF t_output INITIAL SIZE 0,
      wa_output TYPE t_output.
*ALV data declarations
data: fieldcatalog   type slis_t_fieldcat_alv with header line,
      gd_tab_group   type slis_t_sp_group_alv,
      gd_layout      type slis_layout_alv,
      gd_repid       like sy-repid,
      gt_events      type slis_t_event,
      gd_prntparams type slis_print_alv,
      gd_count(6)    type n,
      gd_outtext(70) type c,
      gd_lines       type i.
*START-OF-SELECTION.
START-OF-SELECTION.
clear: gd_count.
GET pernr.
* Infotype 0121 is used to store multiple contracts for personnel.
* Field p0121-hpern contains the personnel number for the main contract.
PROVIDE * from p0121 between pn-begda and pn-endda.
*   Check if main contract
    if p0121-pernr ne p0121-hpern.
      reject.
    endif.
ENDPROVIDE.
add 1 to gd_count.
concatenate 'Processing personnel data'(m10) gd_count into gd_outtext
            separated by ' '.
* Display indicator for employee count
perform progress_indicator using gd_outtext.
* Retrieve datd from infotypes
rp_provide_from_last p0000 space pn-begda pn-endda.
rp_provide_from_last p0001 space pn-begda pn-endda.
rp_provide_from_last p0002 space pn-begda pn-endda.
rp_provide_from_last p0006 space pn-begda pn-endda.
rp_provide_from_last p0008 space pn-begda pn-endda.
rp_provide_from_last p0014 space pn-begda pn-endda.
* Check post code
CHECK p0006-pstlz IN so_pcode. "cp
* Post code
wa_output-postcode = p0006-pstlz.
* Personnel number
wa_output-pernr = pernr-pernr.
* Personnel title
SELECT SINGLE atext
    FROM t522t
    INTO wa_output-anredtxt
   WHERE sprsl EQ sy-langu AND
         anred EQ p0002-anred.
* First name
wa_output-fname = p0002-vorna.
* Last name
wa_output-lname = p0002-nachn.
* Organizational Unit text (dept)
SELECT SINGLE orgtx
    FROM t527x
    INTO wa_output-orgtx
   WHERE sprsl EQ sy-langu AND
         orgeh EQ p0001-orgeh AND
         endda GE sy-datum.
* FTE
wa_output-fte = p0008-bsgrd.
* Parking / travel deducted?
CASE p0014-lgart.
    WHEN '7180' OR '7181' OR '7182'.
      wa_output-parking = text-002.
    WHEN '7183'.
      wa_output-parking = text-001.
    WHEN '7171' OR '7172' or '7173' or '7174' or
         '7175' or '7176' or '7177' or '7178'.
      wa_output-parking = text-003.
ENDCASE.
* Payslip Address
SELECT SINGLE sachn
    FROM t526
    INTO wa_output-payslip
   WHERE werks EQ p0001-werks AND
         sachx EQ p0001-sacha.
PROVIDE * from p0105 between pn-begda and pn-endda.
*   Telephone numbers
    if p0105-usrty = '0020'.
       wa_output-telno = p0105-usrid_long.
    endif.
*   Email address
    if p0105-usrty = 'MAIL'.
       wa_output-email = p0105-usrid_long.
    endif.
ENDPROVIDE.
append wa_output to it_output.
clear: wa_output.
*END-OF-SELECTION.
END-OF-SELECTION.
describe table it_output lines gd_lines.
if gd_lines gt 0.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
else.
message i003(zp) with 'No records found'.
endif.
*&      Form PROGRESS_INDICATOR
*       Displays progress indicator on SAP screen
form progress_indicator using p_text.
call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
*         PERCENTAGE = 0
           text       = p_text.
endform.                    " PROGRESS_INDICATOR
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'PERNR'.
fieldcatalog-seltext_m   = 'Personnel No.'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
* fieldcatalog-emphasize   = 'X'.
* fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'ANREDTXT'.
fieldcatalog-seltext_m   = 'Title'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FNAME'.
fieldcatalog-seltext_m   = 'First Name'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'LNAME'.
fieldcatalog-seltext_m   = 'Last Name'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'ORGTX'.
fieldcatalog-seltext_m   = 'Department'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FTE'.
fieldcatalog-seltext_m   = 'FTE'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PARKING'.
fieldcatalog-seltext_m   = 'Parking/Metrocard'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PAYSLIP'.
fieldcatalog-seltext_m   = 'Payslip Add.'.
fieldcatalog-col_pos     = 7.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'TELNO'.
fieldcatalog-seltext_m   = 'Telephone'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EMAIL'.
fieldcatalog-seltext_m   = 'E-mail'.
fieldcatalog-col_pos     = 9.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'POSTCODE'.
fieldcatalog-seltext_m   = 'Post code'.
fieldcatalog-col_pos     = 10.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-zebra             = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_output
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT

Sample code creating BOM for CS01 using BDC recording.

Hi,
Can anyone give me sample coding creating BOM for CS01 using BDC recording.
I want to display the flat file records,under one (Alternative BOM).
I m already working on it,but i m getting one A.BOM for each records.
[       Header data          ]    [      Item Data               ]
SOFTDRINKS   WIND   1       13            1     ml     l
SOFTDRINKS   WIND   1       11            1     ml     l
SOFTDRINKS   WIND   1       15        1     ml     l
SOFTDRINKS   WIND   1       14       1     ml     l
Code:
report ZBOM
       no standard page heading line-size 255.
*include bdcrecx1.
*DATA: BEGIN OF bdc OCCURS 0,
      matnr(18),
      werks(4),
      stlan(1),
     END OF BDC.
*DATA: BEGIN OF BDC1 OCCURS 0,
      idnrk(18),
      MENGE(18),
      MEINS(3),
      postp(1),
      posnr(4),
     END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(001)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(001)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(001)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(001)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
      I tried with the sample code but i m not getting the required result.
    Can anyone give some other soln.
Code:
REPORT ZBOM2
no standard page heading line-size 255.
*include bdcrecx1.
TYPES: BEGIN OF TY_FLAT,      " structure for flat file
        STRING(200),
       END OF TY_FLAT.
TYPES: BEGIN OF TY_HEAD,     " structure for header file
        IND(2) TYPE N,
        MATNR(18),
        WERKS(4),
        STLAN(1),
       END OF TY_HEAD.
TYPES : BEGIN OF TY_ITEM,    "structure for item file
          IND(2) TYPE N,
          POSTP(1),
          IDNRK(18),
          MENGE(13),
          meins(3),
        END OF TY_ITEM.
TYPES :BEGIN OF TY_FLAT1,   " structure for final file
         MATNR(18),
         WERKS(4),
         STLAN(1),
         posnr(4),
         POSTP(1),
         IDNRK(18),
         MENGE(13),
         meins(3),
       END OF TY_FLAT1.
INTERNAL TABLE DECLERATIONS:
DATA : T_FLAT TYPE STANDARD TABLE OF TY_FLAT,
       T_FLAT1 TYPE STANDARD TABLE OF TY_FLAT1,
       T_HEAD TYPE STANDARD TABLE OF TY_HEAD,
       T_ITEM TYPE STANDARD TABLE OF TY_ITEM,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA with header line ,
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL.
WORK AREA DECLERATIONS:
DATA : ST_FLAT TYPE TY_FLAT,
       ST_FLAT1 TYPE TY_FLAT1,
       ST_HEAD TYPE TY_HEAD,
       ST_ITEM TYPE TY_ITEM,
       ST_BDCDATA TYPE BDCDATA,
       ST_BDCMSG TYPE BDCMSGCOLL.
VARIABLES:
DATA : FNAM TYPE LOCALFILE,           "rlgrap-filename,
       FTYP TYPE RLGRAP-FILETYPE,
       LF_FNAM TYPE STRING.
DATA : V_IND(2) TYPE N,                " value 1,
       V_FLD(20),
       V_NO(2) TYPE N.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = T_FLAT
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FLAT INTO ST_FLAT.
SPLIT ST_FLAT AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO ST_FLAT1-MATNR ST_FLAT1-WERKS
ST_FLAT1-STLAN ST_FLAT1-POSTP
ST_FLAT1-IDNRK ST_FLAT1-MENGE ST_FLAT1-MEINS.
APPEND ST_FLAT1 TO T_FLAT1.
CLEAR ST_FLAT1.
ENDLOOP.
SORT T_FLAT1 BY MATNR WERKS STLAN POSTP IDNRK MENGE MEINS.
LOOP AT T_FLAT1 INTO ST_FLAT1.
MOVE :
ST_FLAT1-MATNR TO ST_HEAD-MATNR,
ST_FLAT1-WERKS TO ST_HEAD-WERKS,
ST_FLAT1-STLAN TO ST_HEAD-STLAN,
ST_FLAT1-POSTP TO ST_ITEM-POSTP,
ST_FLAT1-IDNRK TO ST_ITEM-IDNRK,
ST_FLAT1-MENGE TO ST_ITEM-MENGE,
ST_FLAT1-MENGE TO ST_ITEM-MEINS.
AT new STLAN.
ADD 1 TO V_IND.
ENDAT.
MOVE V_IND TO ST_HEAD-IND.
MOVE V_IND TO ST_ITEM-IND.
APPEND ST_HEAD TO T_HEAD.
APPEND ST_ITEM TO T_ITEM.
CLEAR ST_HEAD.
CLEAR ST_ITEM.
ENDLOOP.
CLEAR V_IND.
*perform open_group.
SORT T_ITEM BY IND.
SORT T_HEAD BY IND.
DELETE ADJACENT DUPLICATES FROM T_HEAD.
LOOP AT T_HEAD INTO ST_HEAD.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              ST_HEAD-MATNR.
perform bdc_field       using 'RC29N-WERKS'
                              ST_HEAD-WERKS.
perform bdc_field       using 'RC29N-STLAN'
                              ST_HEAD-STLAN.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
LOOP AT T_ITEM INTO ST_ITEM WHERE IND = ST_HEAD-IND.
ADD 1 TO V_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-MENGE(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              ST_ITEM-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              ST_ITEM-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              ST_ITEM-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              ST_ITEM-POSTP.
CONCATENATE 'RC29K-IDNRK(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-IDNRK.
CONCATENATE 'RC29K-MENGE(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MENGE.
CONCATENATE 'RC29K-MEINS(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MEINS.
CONCATENATE 'RC29K-POSTP(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-POSTP.
V_NO = 1.
ENDLOOP.
CLEAR V_NO.
*perform bdc_dynpro      using 'SAPLCSDI' '0130'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR'.
*perform bdc_field       using 'RC29P-POSNR'
                              POSNR.
*perform bdc_field       using 'RC29P-IDNRK'
                             bdcdata-IDNRK.
*perform bdc_field       using 'RC29P-MENGE'
                             bdcdata-MENGE.
*perform bdc_field       using 'RC29P-MEINS'
                             bdcdata-MEINS.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                                 'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0133'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-matkl'.
perform bdc_field       using 'RC29P-SANKA'
                                 'zv01'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
*perform bdc_transaction using 'CS01'.
perform close_group.
CALL TRANSACTION 'CS01' USING t_bdcdata MODE 'A' UPDATE 'S'.
REFRESH t_bdcdata.
clear t_bdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR st_bdcdata.
st_bdcdata-PROGRAM = PROGRAM.
st_bdcdata-DYNPRO   = DYNPRO.
st_bdcdata-DYNBEGIN = 'X'.
APPEND st_bdcdata to t_bdcdata .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR st_bdcdata.
    st_bdcdata-FNAM = FNAM.
    st_bdcdata-FVAL = FVAL.
    APPEND st_bdcdata to t_bdcdata.
ENDIF.
ENDFORM.

HELP: Is it possible to record from multiple video streams using iMovie?

Is it possible to record from multiple video streams using iMovie.
I want to record a presenter on a greenscreen and also his powerpoint slides at the same time and cut from one to other.
Can imovie record from screen and camera at same time?
If so is there a link to somewhere explaining how to do so?
If not, what is the most efficient way to do so, without having to learn a whole complex program?
Please advise asap.
Very many thanks

Alan and Anthony,
Thanks for the quick responses. Unfortunately, there is no backup :(.
I will ask if they get logged into the global zone, but one thing I forgot to mention is that this zone (as are all our non-global zones and the global zone also) are configured for ldap logins.
Assuming that they can even try to login to the global zone, can they even see the directory structure in the non-global zone (sorry, I haven't worked with Zones much thus far) from the global zone?
Also, if they can see the non-global zones directory structure, what should they then try?
Also, I've been searching and I've seen some suggestions of running a "pkgcheck -af" which might restore the directory permissions to what the various packages expect. Assuming that they can get to the point that they can at least log into the zone, is that something that would work?
I'm setting up a new test Solaris box now, with a zone, to try to reproduce the problem. If I can reproduce the problem, I'll post back whether or not I see the same thing.
In the meantime, if anyone has any suggestions, please post them.
Thanks,
Jim
P.S. In case you're wondering, the box/zone that got messed up was a test/integration zone, and they were in the process of installing some software when this chmod happened.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

Custom pagination for APEX 4.2 interactive report using Page Zero

Hi,
I want to implement an «Custom pagination for APEX 4.2 interactive report» using a «page zero».
I recently migrate from Apex 3.1 to Apex 4.2 and my «Custom pagination for APEX 3.1 interactive report» using a «page zero» is not working any more.
So now I try to adapt an excellent example of Jari Laine for 4.0 but using a page zero.
I put the code JavaScript to Page zero but I must create an dynamic action to fire only for an interactive report region.
It’s a good idea?
Thank you

Thought I would try once more with my DatePicker question.
On the Apex.Oracle.Com website I have created a 1 page application that has an Interactive Report.
[url http://apex.oracle.com/pls/apex/f?p=15655:1]
user = 'test'
password = 'test'
I have 2 questions :
(1) In IE7, press 'Actions', 'Filter'. On the Column dropdown list, select 'Order Timestamp'.
Notice the prompt icon to the right of the 'expression'. This should change to the Datepicker, but in IE7 it does not. Try the samething in Firefox or Chrome and the Datepicker will appear.
Is this a BUG, or does Apex 4.02 not support IE7 ?
(2) In Firefox or Chrome, where you can now see the Datepicker, you will notice that it is the new style picker, not the old style ( called 'classic' ). I want to change it so that it shows the 'classic' datepicker not the new, but cannot see how to do it, if indeed you actually can.
I would really appreciate it if someone could take a look and let me know if I am going mad, or if we need to get all our users onto IE8. We have now gone live with Apex 4.02 and need to resolve these issues.
Thanks in advance.
Edited by: DooRon on 10-Mar-2011 05:13

How do I get ALL the info records for a materials plants using an SAP FM?

I need to get all of the info records from the EINE table for a material - all of its sites (plants, we are using SAP retail).
The problem is this: I call the FM MD_INFORECORDS_READ - here is the code for my call:
CALL FUNCTION 'MD_INFORECORDS_READ'
          EXPORTING
            imatnr               = t_output_data-article <-- the material number
            iliefnr              = lv_eina_key < -- see below on how I get this
          importing
            eeine                =
          TABLES
            exp_eina             = it_eina
            exp_eine             = it_eine
          EXCEPTIONS
            no_eina_record_found = 2
            no_eine_record_found = 3.
lv_eina_key is taken from this call:
SELECT SINGLE altkn INTO lv_vendor_no
        FROM lfb1
        WHERE lifnr = lv_site (plant)
        AND bukrs = t_output_data-company_code.
The probelm is it only returns the first record it finds for each site. There could be multiple info records, each one based a a different Valid From date for each site. I need either ALL of the EINE records for each site OR the most current one
I know I am not using ALl of the parms in the FM - but are there maybe there are other ones should I be using.
Perhaps there is there another FM I should be using - cause I do not have the info record number to pass.
Thanks.
Scott

Never mind - the FM does work - this was bad data.

Use of virtual cube 0FIGL_V10 for reporting on Financal Statements

Dear all,
I am new to the GL reporting and I have a question about the usage of the virtual cube for reporting on Financial Statements.
On the content site I see that you can report your Balance Sheet based on the infocube 0FIGL_C10, where you can use the infoobject 0GLACCOUNT to display the balances.
I also installed the Virtual Cube 0FIGL_V10, which has the infoobject 0GLACCEXT to show the Financial Statement Item hierarchy.
My questions are:
- to create a Balance Sheet Report, is it advisable to use the content query 0FIGL_C10_Q001?
If I run that query now, it is showing the data on seperate G/L accounts, where I would like to see a hierarchy display.
For reporting on the capital expenditure however the requirement is that some G/L acoounts don't have to be taken into account. How can I exclude those then from the hierarchy for that report?
- to create the P&L, advice on the content site is to use the virtual cube because you have the Financial Statement Item hierarchy available there and you can report on specific financial statements.
Can anyone tell me the added value of using the Virtual Cube? Or can I skip it and just add the Financial Statement Item hierarchy in the 0FIGL_C10 cube and create a report where I select the nodes of the hierarchy that are only applicable for the P&L? Will that corrupt the figures or have any other effect?
Thanks in advance for the help!

Hi Sundar,
As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
Hope it helps..
***Assign Points***
Thanks,
Gattu

Excel Output for Standard Reports using XML Publisher

Hi All,
Customer wants to get Excel Output for the existing Standard/Custom Reports using XML Publisher. I followed the following procedure.
1. Changed the output to XML for Concurrent program ( Trial Balance - Detail )
2. Used the Existing seeded Template
3. Ran the Report using EXCEL as the output.
When I clicked on View Output, I am not able to see the Excel output. I am seeing the HTML tags in the output window. Verified that Viewer Options existed for Excel as follows:
File Format=Excel, Mime Type=application/vnd.ms-excel.
When I ran the report with PDF output. I can see the PDF output.
Ran the HTML output with new Viewer Option ( File Format=HTML, Mime Type=application/vnd.ms-excel) then I can see the output in Browser in the Excel format. I did this test after going through the Metalink Note: Note:316752.1
My question is.. Do I need always choose the HTML ouput in the options window to trigger the Viewer option for HTML. Customer may not like this idea. He would like to choose the Excel Output and see the output in Excel format either in the Browser or Microsoft Excel.
Can someone in this situation before help me out.
Thanks,
V

Questions rephrase:
1. Is the output is same for HTML and Excel options ?
2. Why the output is viewable with HTML option and not with Excel option ?
Customer has XML Publisher Version 5.0.1 and in the process of applying 5.6.1
Thanks,
V

Pivoting records for reporting using streams

Similar Messages

Maybe you are looking for