PIX change management software

Hi, i have Cisco works LMS3.0,
i have added all routers switches, and after every 24 hours, all changes to my routers switches, i get that via email,
but i dont see any change report of cisco pix firewall.
dont LMS3.0 support firewall changes ? am i missing some thing? or i need some other software to do that?

Thank you for the information, But i dont get change report , though devices are added in same way as of Routers,
Do i need to do any additional confoguration on firewall, except SNMP string and specifying IP address of server running LMS and its interface name inside in my case?
in my PIX i have this confoguration, router confoguration change report comes fine, with same set of information configured in router/switches.
snmp-server host inside x.x.x.x community abcd
snmp-server community abcd

Similar Messages

Change Management Software

Hi,
Are there any formal software tools to document and manage Change Management
Thanks,
Suneela.

Hi,
From a process point of view, consider using the following. I have found these to be interlated so you keep revisiting them as the activity progresses and keep on refining and updating them.
-Draw up process maps for the current process and the way it is expected
to be, and run a gap analysis.
-Perform a stakeholder analysis
-From the stakeholder analysis, draw an influence map
-Identify the cost of change for the stakeholders based on the gap
analysis. Remember that is this context, most costs are not financial.
-Develop a communications and training plan.
Reward points if found helpfull...
Cheers,
Siva.

New EWA Report Topic - Software Change Management

Dear Experts,
EWA reports has a new topic named Software Change Management , in this topic there is a subject name "Transport Requests with a short Transition Time" with following explanation;
Explanation : Transport requests with short transition time,The duration between the export from the development system and the import into the production system was shorter than one day.
Total number of transport requests 74 Total number of transport requests in production.
Recommendation: Transport requests with a short transition time of less than one day have occurred in the last week. These transports may not have been tested sufficiently.
All transport requests must be tested carefully before they are imported to the production system. The requests must not be developed and tested by the same person.
Transport requests must be bundled and imported to the production system together for maintenance cycles or releases. Daily imports are only permitted in emergency situations.
How can we check which requests Export from DEV date and Import in PRD are same ?
Best Regards

sap support send the how to document ;
1- Call transaction SDCCN in system SID and search for the corresponding EWA session in tab 'Done'. Click the "lorry" icon
2-Press the glasses icon at DATA_PER_R3SYSTEM
3-Press the glasses icon at CMO_EWA_TRANSPORT_MGMT
4- Press the glasses icon at ET_TRANSP_W_SHORT_TRANS_TIME
5- Now, you have the complete list of transports with a short transition time:

Software Configuration and Change Management for ABAP

Hi all,
we developed an ABAP application with about 10 developers and shipped it to Customer A.
Then we do corrections and enhancements for a new Customer B. But then Customer A finds bugs in his shipped version, which is not the current version on our development system.
Now a lot of time is wasted debugging the current version and finding out why the bug is there in the shipped version A but not in the current version.
So its difficult and timeconsuming to manage those different versions of the same application for different customers.
This effort increases with each new customer dramatically.
The ABAP workbench only knows linear versioning of single ABAP objects like report, function module or class.
Now the question:
Is there a standard transaction or external ABAP software that supports such a Software Configuration & Change Managment, i.e. allows tagging, branching, maintaining multiple development branches, allows running transactions and reports of older revisions, etc. like so many non-SAP/ABAP SCCMs like CVS, Bitkeeper, Subversion or Monotone do in the OpenSource world?
I found one called Conigma from Galileo Group, but am wondering if there are others, or whether there is someone having used such a tool.

Hi Frank,
In ABAP world, there is supposed to be one development environment for one production system.
The transport of changes follow the path
DEV --> QAS --> Production.
One golden rule is while making any changes to a program in Development, ensure that the version is compatible with production and QAS.
If there is a change request already open for the development object then that earlier change request should be finished first and the changes should get transported to QAS and production.
It seems you are trying to handle two production systems using one development system. That will surely bring some serious fun
Though, if you have no other option then keep the record of versions applicable to your different customers.
Later retrieve the version according to the customer before making any changes.
Cheers,
Ram

Lion Battery Management Software seems to be erratic.

The Lion OS X 10.7.2 battery management software appears to be very erratic.
I just brought a new MacBook Pro direct from Apple last week (late 2011, 15", 2.4 GHz, 8 GB 1333 Mhz DDR3, 7500 rpm disc) with Lion OS X 10.7.2 preinstalled, i.e., the latest and greatest. I was only getting 3 hours on a battery charge until it ran out. After searching the forums nothing quite matched (older models, different graphic cards, more constrained systems, Lion software upgrades, etc).
I have the screen brightness set to about 50%, the power option "put disks to sleep whenever possible", and the keyboard set to turn off the light after 30 seconds of non-use. On battery, I have "display sleep" at 6 minutes and "computer sleep" set to 10 minutes. So I am not pushing the power consumption very hard.
I ran a "repair" from the recovery partition and my hard disk had no problems.
So I tried the Reset Power Manager metioned in another thread:
Shutdown
Depress Ctrl+Option+Shift
Power on
Hold for at least 10 seconds
Power on
and that extended my battery charge to 6 hours, not quite the 7 hours advertised. (I even tried it on my mid 2009 Mac Book Pro 13", Snow Leopard OS X 10.6.8 and its battery life was extended by about .67%).
But I started seeing odd reporting in the "time remaining" in the battery icon. The "time remaining" would fluctuate by as much as 20% in a just a few seconds, going either up or down! For example, it would jump from 4 hours to 3 hours, then up to 3.5 hours then up to 4.5 hours, down to 1.3 hours, and back up to 4.0, and so forth whenever I changed the state.
So I watched the "battery charge remaining" over several hours with different states: (WIFI on/off, start/stop applications, turn Thunderbird/Firefox to offline and back to online; Thunderbird is not an issue because I have it set to check for incoming messages every 2 hours not every few minutes) and I monitored using the Activity Monitor and the widget iStat Pro. The cpu was reported to never exceed 2% busy, user+system, and free memory never fell below 5.9 GB with minimwl swapping and paging, i.e. the machine was basically idle even when I had WIFI on with Firefox watching Adobe Flash video from the net, which is purportedly a CPU hog (it is not).
Has anyone else seen this erratic battery software managemt behavior? Does any have an explanation?

I noticed in some archived threads that someone suggested changing "time" to "percentage" because "time" remaining is calculated every few seconds and is very sensitive to changes of state as I noted in my post. I don't see that "solution" as much use because it doesn't tell me "percentage" of what? The amount of charge left? What I really what to know is "how long will my charge last?". 70% of 3 hours is something quite different than 70% of 7 hours. It seems to me that the time remaining ought to be calculated less often. The value is reported in hh:mm. I don't see much point in calculating it every few seconds. Once a minute would actually be more accurate.

Cisco Network Management software options

Hi,
I wanted to see if anyone can give me a quick breakdown on the differences between some Network Management software titles. I dont know when you would use each one or what the limitations are of each.
CNA - Cisco Network Assistant
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps5931/product_data_sheet0900aecd8068820a.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html
CCP - Cisco Config Professional
http://www.cisco.com/en/US/prod/collateral/routers/ps9422/data_sheet_c78_462210.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_7/rlsnts/ccp_v27_rel_notes.html
CCA - Cisco Config Assistant
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps7256/ps7287/data_sheet_c78-682273.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/release/Notes/cca_3_2_1_relnotes.html
Cisco Prime LMS (are their different versions or products here?)
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps11200/data_sheet_c78-697479.html
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2.3/release/notes/lms4_2_3_release_notes.html
CiscoWorks (depreciated? Now Prime?)
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
I have been looking over the realease notes for each product trying to draw some conclusion on which titles support or dont support certain products.
Has anyone used these and can give a quick answer for when you would use each and if there are any gotchas or limits to watch out for?
It looks like Prime is a paid for product but will any of the free solutions (CNA, CCP, CCA) work with all enterprise level products (2950, 2960, 3560, 3750, 4948, 4900 4500 switches and 1800, 1900, 2800, 2900, 3800, 3900 routers) or do you have to use Prime to get a product that will mange these devices?
Thank you in advance.

Hi Marvin,
i am currently try to explore cisco prime Infra 1.3 and facing some problem.
1 : i have set the admin password at startup config but this password is not working(i am pretty sure that i have enter the same password)
2: Can i change the prime lan infra clock setting from it,s GUI
3: i am not able to see the end client assosiate to a cisco switch(C3750 )
4: i want to know can i use cisco infra to monitor broadcast on a switch port level.(suppose switch 1's port 10 client making broadcast ,can i monitor that)
is there is any videos avialable for cisco prime infra 1.2/1.3 .
Thanks,
Prashant

Best Contact Management Software for Mac

I'm sure this question has been asked before but I can't find it anywhere. Plus, I'm not sure if I'm even in the right place. But, can you tell me what contact management software works the best for Mac?
Also, I'm new to using such software, is there anything specific I should be looking for when choosing one?
Thanks!

I'm sorry to say there isn't much around. It has been a bit of a weak spot for Mac / OS X for ages - but things are possibly improving.
Any CRM solution for OS X needs really to co-operate with Address Book and iCal - so you can sync your stuff out to PDAs or whatever, and use them in Mail / iWork / Office 2008 etc. that are already written to work with such info in AB and iCal. If it doesn't, you end up with a closed-off app that can't easily work with you on the machine, and which then has to re-do code that already exists. Odd design constraints in earlier versions of iCal and AB made this harder - they were not very aware of other systems / apps. But this is changing in Leopard, and there are some promising things on the horizon (though none really useful solutions avail yet).
Of those out there, probably the best notional app is (in my view) Now Software's Nighthawk (http://www.nowsoftware.com/nighthawkSubsite/index.html). It is written by a team with a solid track record of CRM development on Macs, and is apparently designed to play nice with iSync and the rest. Trouble is it doesn't yet exist - rumours of a public Beta have been out there for months, but the date keeps slipping. Could be a good thing, or signs of major problems - who knows. Realistically you'll not see anything commercially viable from them before April next year I reckon.
But waiting could be good. The other attempt we've seen is SOHO Organizer by Chronos Software. (http://www.chronosnet.com/Products/sohoorganizer.html) In description it does the business - iSync / iCal / AB compatible. But it has had a troubled development, and there is lots of grim sounding reports of trouble with the app on the net. The developers are not very kind to themselves with not much disclosure and (at least last time a looked) a restrictive demo / preview policy (you get one trial period, and that's it, for ever! Even if they bring out a major version number change). My personal experience is that they tell a much better marketing story than they deliver in software - but I've steered clear of the app for a long time now (after a seriously bad experience) but who knows, they might well have caught up with their ambitions by now.
There are many others about that are really central web-based systems - which is fine provided you don't want to use Mail / AB / iCal or sync any of this to your phone / PDA / .Mac or whatever.
So, nothing much going on now. But ever hopeful...
If anyone knows more / other stuff - would be good to know about. We're still travelling hopefully.
Message was edited by: Gavin Lawrie - correct typo

ACER eSettings Management Software?

Does anyone know where to download ACER eSettings Management Software? I cannot remember my BIOS Password and need to delete/reset it.http://www.tech-faq.com/how-do-i-reset-an-acer-bios-password.html discusses how to do this but I cannot find the software.
I really do not want to open up the Laptop and remove the Bios Battery.

Hello Laurent_14, Sorry for my delay.Thank You for your response regarding the eSettings Software. It doesn't seem to help my situation though. I decided to install Vista on the Laptop so I could run eSettings Mgmt, but as you probably realize finding drivers thast will work with Vista for that Acer Model was impossible.
Regardless, I installed Vista, then the Management software suite. All looked good except for the fact that eSettings would not allow me to change the Bios password. That Button was Grayed out.The button to set a password was enabled but told me I had to enable the option in Bios. ARRRRRG. I used a Bios Password Generator to allow me into the Bios and was able to set Security to Legacy in order to install Vista, but still could not change the existing password without knowing the original.
Any reason this software would not see that a password was set and allow me to change it.
Any further suggestions you could possibly offer??? Thanks for responding and your help up to this point.

Please recommend photo management software.Thank you.

Hi everyone,
I am looking for suggestions and advice about photo database management software.
I will be graduating as a veterinarian in February and plan to document my forthcoming cases, using photos and perhaps some videos. At this point in time I believe it will be useful if the software is available for Mac as well as Windows platform (see later why).
However, I am open to any suggestions regarding Mac-only or PC-only programs as long as they are professional, reliable, strong, fast and customizable.
The photos entering the database will be:
1. close ups (taken with or without flash) or
2. taken from a close range (about 1-2 m for pets or about 5 m for horses/cows),
3. except for cropping, brightness and sharpness adjustments, there will be NO editing
4. saved in RAW, TIFF or JPEG. (I am not yet clear about the differences between these however the software should be able to handle as many major formats as possible).
Ideally, the software would allow:
1. to create custom keywords and add descriptive comments for each photo.
2. grouping of photos based on different criteria, themes, parents etc.
3. fast search
4. custom search, based on a large range of criteria, including text
5. Mac-PC interaction: Allow me to explain this: I have 2 laptops (Mac & PC) onto which intend to install the software and if the working environment uses PC only software, I will have the PC with me, otherwise the Mac and the database is always at hand.
6. data attached to each photo will move with it when the photo is transferred to a different machine using similar software (see above).
Thank you for your time.
D.M.

You should take a look at iView Media or its Pro version. It is a cross-platform (Mac and Windows) program that is free of some of the stultifying limitations of iPhoto. For example, you can create multiple catalogs and you can easily catalog media (not just photos) that are not on the current disk, like media stored on CDs. It has very flexible cataloging features.
If they have not changed their licensing, you can buy one license to run both the Mac and PC version for one price. You can make one catalog and easily pass it between a Mac and PC with no translation or confusion. This would be much easier than trying to make it work with iPhoto and some other Windows program.
If you were to go the iView route, you would have to "sync" the data back to the photos so that they carry your keyword etc. data with them to other apps. I don't know if iPhoto embeds that info back to the photos, or if it stays in the iPhoto database only.
Photoshop Elements 4 is great on Windows, but the Mac version of Elements does not include the cataloging feature because it integrates with iPhoto. I'm not sure how smooth that all works.

How to install Oracle Change Management Pack for 11g database.

Hi,
I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
Oracle Configuration Management Pack
Oracle Data Masking Pack
Oracle Diagnostic Pack
Oracle Tuning Pack
using following URL
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
Regards
DBA.

As far as I could understand, this is a part of Oracle EM/Grid installation:
The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

How do the change management for the configuration of the adapters

Hi all.
How do the change management for the configuration of the adapters, when i transport the software version component from an development system to production system.
For example, for to change the url parameters of adapters soap inside the production system. I will need type, the news values in this system?
Thanks
Best Regards.

There is an option to pass all the paramters except those who changes from
system to system.
for example,
if you are reading from a file from the directory: <SYS>\CREMAS_<TS>.XML
when <SYS> is DEV or QAS or PROD, and <TS> is time stamp,
you can create channel template that read file with file pattern CREMAS_*.XML,
this can save you a lot of work, however, parameters that are diffrent in every system, (in this case the directory DEV,QAS,PROD) you must enter manually in every system.

Typical example of SAP change management in SD scenerio....

Dear All,
Is there anybody who can provide me with typical example of SAP Change Management scenerio in manufacturing industry OR in consumer industry.
I am looking for some example that has improved a business process tremendiously OR made the business process simpler to use. At the end stakeholder got benefited with that change.
Thanks you all in advance.

Dear All,
I am putting my query once again....to see if I can get some expert help.
I would like to know any particular example of any manufacturing OR consumer goods industry where SAP software itself had made a great changes in change management prospective( ex -any business process change which had to make to make present process more smoother or cost effective).
Hope to hear from some of few.
Thanks in advance,
Cheers!

Change Management Service

Hi all,
I know transporting using file system but what is change management service. is it any tool, please let me know about this.
Thanks,
anil.

Hi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Also...
How to configuring the CMS for XI?
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Where can I get installation files of DTR, CBS, and CMS?
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
'How ToTransport XI Content Using CMS'.
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards
Chilla

Change Management Topics

Hi,
Has anyone come accross any change management topics during implemetation?
Can you tell what it was?
Thank you.

HI
Refer below
http://change management
SAP CHANGE MGMT
Purpose
Once you have installed and configured your software landscape, you must adjust it to continuously changing requirements. For example, you may need to react to changes in the organization of your enterprise, provide new functions, or implement any improvements to the quality of SAP components shipped by SAP at regular intervals.
The functions included in Software Change Management standardize and automate the distribution and maintenance of software in complex landscapes.
Software Change Management provides you with tools that enable you to react flexibly to changing requirements consistently and across different solutions.
Features
· Change and Transport System
Enables you to distribute software changes from the development environment, through a quality assurance system, and into the production environment.
· Software Maintenance
A standardized maintenance procedure involving the import of Support Packages and Add-Ons and the implementation of corrections from SAP Notes

Calibration Management Software

I work at a research lab that has approximately 7 test cells. Each cell has around 50 measurement channels using field point or PXI/SCXI DAQ read by Labview. Hooked up to those channels are TC's, pressure transducers, flow meters, level sensors. We have some in-house calibration equipment (PRTD's with dry well's, high accuracy pressure sensors with pressure sources). In the past calibration was done by comparing the readouts of the calibration equipment with the readouts of the Labview screen by typing the information into Excel, generating curve fits in Excel, and then typing the data into Labview (or maybe even reading a file in Labview) and then the calibration equations are run in the Labview program. The different calibration points (say 70 oF, then 80 oF) have been set manually by a person watching the operation. I have gone through and used Labview to automate reading the calibration sensor and changing the setpoint on the source (dry well). This is a great accuracy improvement and time saver. The next logical step is to keep the calibration history in a database so that we can evaluate drift over time, etc., instead of decentralized Excel sheets for each channel. We have found many companies that make "Calibration Management Software" (CMS), though none that do not require extra customization so that I can take the data from my automated Labview Calibration routine and enter it pragmatically into the CMS, and then pragmatically recall calibration coefficients from the CMS. At my previous employer I saw a software package have this sort of communication with MetCal/Trak, though in talking with the fluke sales man he started talking of extra licensing fees, paying them to write specialized code, etc. beyond just paying for the MetCAL/Trak. The added cost to get the Labview integration was left an undefined number.
Does anyone have a good solution that they use that they could share some details on?

Hey James,
Sadly, I'm not familiar with any calibration management software that does not require added customization. When you say that you have the calibration history in "decentralized Excel sheets", what exactly do you mean? My thinking is that you can develop your own CMS using the file writing/reading in LabVIEW. If that's not feasible, it seems like you may have to look more into the customized CMS option.
Hope you have a good one!
Tim A.
National Instruments

PIX change management software

Similar Messages

Maybe you are looking for