Pixelated, low quality text in DVD Studio Pro

Is it normal for the text in DVD studio pro to be pixelated and low-quality once you burn a project and enter full screen mode (is this because it is not vector-based)? Is there a *better definition/resolution setting* without going into HD which is not compatible with all machines? how can you get better quality line definition?
and most importantly..can you apply this setting to the project once it has been created?
thank you for your help

buttons are have jagged edges and are little play triangles, just the standard shape for play...
..I spoke to someone today who said ts pretty impossible to get defined edges unless you have a super-expensive post production suite...right?..and something to do with anti-aliasing
any way round this 'jagged edge' issue or is it actually the program has this 'poor resolution'in accordance with you mac capabilities?
p.s. sorry about my language...as you guessed Im pretty computer-lingo-illiterate...so please answer plainly if you can...thank you ever so much...I think we might be getting somewhere...or at least to a point

Similar Messages

  • Poor quality text in DVD Studio Pro

    Hi there,
    I'm using DVD Studio Pro. I create menus in Photoshop and export flattened .psd files.
    I work in PAL. This problem is worse in 16x9 (anamorphic).
    I create the menus at the true original res of 1024x576. When the menus are imported into DVD Studio Pro the text becomes jagged and pixelated. I understand that non-square pixels are causing this, but I don't know of a solution.
    What is the best way to bring menus and text into DVD Studio Pro?
    I have searched a lot and noone has a great solution.
    Thanks heaps,
    Mike

    You may find that Photoshop does a better job of resampling down to your SD PAL resolution. When DVDSP resamples down from your 1024x576 file, you are at the mercy of the hardware or software rendering in DVDSP, depending on your DVDSP prefs. Ideally, I'd work in Photoshop at 720x576, and use the pixel aspect ratio correction to correct the preview aspect ratio in Photoshop.

  • Blurry Text from DVD Studio Pro

    Hello, I've created 4 'slide show' type presentations in motion 2. Project settings are:
    Width: 1360
    Height: 768
    Bit Depth: 8 Bit
    Pixel Aspect Ratio: HD (960x720, 1440x1080) 1.33
    Field Order: None
    Frame Rate:59.94 fps
    Render Settings:
    Motion Blur: Samples: 8
    Shutter Angle: 360
    Output: Antialiasing Method: Best
    I've tried many many compression settings:
    MPEG-2 6.2Mbps 2-pass 16/9.m2v
    Uncompressed 10-bit NTSC.mov
    Importing raw motion files into DVD Studio Pro
    All of the resulting dvds burned from DVD Studio pro look pixelated and blurry when played on a dvd player onto a Toshiba 32HL86. Unfortunately its an SD dvd player connectedt to the tv, so not sure if that has a major impace.
    DVD Studio Pro Settings are:
    Project: SD DVD
    Video Standard: NTSC
    General:
    SD DVD Menus, Tracks and Slideshows:
    Display Mode: 16:9 Letterbox
    Encoding:
    MPEG-2-SD
    Aspect Ratio: 16:9
    Field Order: Auto
    Mode: One PAss VBR
    Bit Rate: 6.8
    Max Bit Rate: 8.0
    Motiion Estimation: Best
    I am at my wits end, can somebody tell me what I'm doing wrong?

    I'm not an expert, but have recently had similar problems with graphics that had text, black lines, lots of contrast, and movement. They looked great on HD but when I made a SD DVD, they were very blocky and pixellated - completely unusable. After lots of experimentation, I've finally got an acceptable dvd. Went back to my original shots - in Final Cut, (I'm not sure if you can do this in Motion) and carefully applied a little Gaussian Blur (.25 to1) to each according to how badly they pixellated. Also adjusted blacks and whites so they weren't so contrasty. Then made my mpeg with Compressor - two pass vbr, 6.8 mbps, best motion estimator. The Gaussian Blur seems to break up the areas that get blocked up and pixelated. SD dvd is such a lousy low resolution medium anyway, that it doesn't seem to result in any focus problems and helped most shots - I've even gone back and applied it to some of the regular footage that was pixellating. It was a lot of work, you may want to see if an expert weighs in on this.

  • Jagged text from DVD studio pro

    Hi,
    I have created a number of sequences in Final Cut Pro and in the beginning of each sequence I have added a text (chapter name) with the font Zapfino.
    When exporting to quicktime in 720 x 1280 the type looks beautiful when I play back the .mov file.
    I am importing my sequences to DVD studio pro for playback on television .
    The type from Final Cut looks pixelated, jagged and terrible after the encoding. I added text in DVD pro to the menu page. That text looks fine.
    I can not find a setting in DVD pro that looks like it will render the text better.
    I have heard that the interlacing can damage text.
    Can anyone help?
    I created my menu page in Photoshop with a image that is 720 x 1080 pixels in 72 dpi.
    The first time around I created a title in Photoshop. That one looked terrible as well.
    Secondly I created the title in DVD pro and as mentioned that looks good.
    Do you recommend higher resolution than 72 dpi for a menu page?
    Thank you on beforehand.
    ggaarde

    Sorry I meant to say that my PS image was 720 x 1280 (not 720 x 1080)
    It shouldn't be that size if you are making a SD DVD Menu. If you have later versions of Photoshop start a new blank project with pixel aspect ratio on for what you are doing (NTSC 4:3, NTSC 16 x 9 ) etc.
    Other take a look at the guidelines in the manual for creating menus (For NTSC 4:3 720 x 534 and rescale to 720 x 480 without constraining proportions.) You are best off rescaling outside DVD SP and not letting DVD SP scale.
    Also look at this [link|http://discussions.apple.com/thread.jspa?messageID=10682141&#10682141]

  • Compression quality: iDVD vs DVD Studio Pro vs others?

    I am merrily editing along in FCE, and looking to eventually compress and burn onto DVD. Since I can use all the quality I can get, and don't have spare money (so what else is new?), I am wondering about the differences in compressing software. Is there a visible difference in the final product using DVD Studio Pro vs iDVD? Is there something else out there that is better than iDVD but doesn't cost as much as DVDSP? Any opinions or experience welcomed!
    Thank you!

    If your project is under an hour, iDVD will give you very satisfactory results (use the Best Performance settings).
    You can create an up to 2 hour movie with iDVD but personally (with Best Quality), I think the quality begins to slide off a bit over an hour
    DVD Studio Pro, with Compressor, gives you many more compression options. Compressor has lots more compression pre-sets and you can go in and tweak bit rates, single or double passes, etc. You can do that inside DVD Studio Pro as well. Overall, Studio Pro just gives you a lot more options and control.
    Roxio Toast is a relatively cheap (around 80 bucks Cdn) piece of software that will compress your FC movies. You are way limited in terms of things like menus and chapters but compression wise it does a fairly nice job ... again, you don't have the versatility of iDVD. With Popcorn, it will allow you to cram a big movie onto a single layer DVD but the quality begins to hurt
    Personally, no matter what you use, two hours is the reasonable quality limit for a single layer DVD

  • Best quality export to DVD Studio Pro for HD

    Sorry if this has been resolved before but I am totally confused.
    I am using FCP with a Sony HVR-Z1E. I aim to make the highest quality clips on my dvds prefering to have many short high quality dvds than having fewer long low quality ones. I would be very grateful if someone would sujest the best setting for this or to create a new one.
    Thanks for any help
    Regards Alf

    Compressor has some presets for making high quality DVDs, I'd start with those. Take a short sample of your footage that you feel best represents the visual quality of the piece, and start testing different configurations. There is no one magical setting that is going to work for everyone. You'll also probably reach a point where you really can't tell the difference between one high bitrate and another higher bitrate. This can be a good indication that you've found the best quality option.
    Using CBR encoding will give you the highest, consistent quality, but larger filesizes. Using VBR will maximise your quality to filesize ratio.
    Do be aware that DVDs do have a bitrate limit of 9000 Kb/s. This includes both your audio and video. If you're audio and video bit rates add up to a sum greating than 9000 Kb/s, DVD SP will throw a weird error when you try to build your project.

  • Will DVD Studio Pro support dual layer media

    I have a project that is 1 hour and 46 minutes long. DVD Studio Pro 2 has built the project but it reports that a 4.7 DVD will not hold the build. Other than the Data Meter, is there a way to find out how much the project is over 4.7? What are my options? Is it possible to lower the compression settings to get this to fit without sacrificing too much quality? Does DVD Studio Pro 2 support dual layer burning? Sorry about asking these questions, but I am on my laptop which does not have the program or help/manual and I would like to find out ASAP so I can order dual layer media if that will work.
    How sketchy is playback of home burned dual media in ordinary DVD players?

    You should be able to get your project on a DVD-5, you would need to adjust your encoding settings and depending on the footage you may not see a big hit (You can build the project to see how far over it actually is)
    First if you have not made the audio AC3, do so, will save room
    As to the video , take a look here for calculator
    http://www.videohelp.com/calc.htm
    Usually I tweak a bit lower than the calulator. For instance if it says an average rate of 5.2, set you average to 5, chances are you will not see the differene between 5 and 5.2 and can save you reencoding heartache/headache down the road. Max rates really should not be higher than 7.4 or so - do not set max video rates to 9.636 as shown in the calculator. In theory it works, in practice can cause playback issues.
    How sketchy is playback of home burned dual media in ordinary DVD players?
    +R DL works fairly well DVD SP 2 did not support DL burning if I recall correctly, but if you have Toast you can burn from there.

  • Quality issues in iDVD - is DVD Studio Pro the answer?

    Hi all,
    I am having a problem producing a high quality DVD with iDVD. I know this is the DVD studio forum but I am wondering if I need to switch form iDVD to get the results I want. So, this is what I am doing in iDVD.
    I am using 13 QT (.mov) movie files that were made using the "Best" quality setting. Their size is 720 X 480. I am using the "Professional Quality" encoding in the Preference dialog and the Project settings dialog. The theme I am using is Revolution. (This is all in iDVD)
    I have burned a few DVDs (Memorex DVD+RW, 4X) and at first used the "Best Performance" encoding. It took about 20 min to burn the DVD. The results were too pixelated. Then I read about the other settings, and used the "Professional Quality". This higher setting took over 40 min to burn the DVD. Unfortunately,the results were not that much better.
    Can someone help me to figure out what is wrong? I am looking to produce the crisp quality I see when I view the QT movie files (before I incorporated them into my iDVD project).
    What I am thinking is that iDVD is not capable of producing the high crisp quality I am looking for and that DVD Studio Pro might be my answer. Or, could it be my QT movie files (thou they look great when I just play them on my computer in the QT player.
    Thanks
    PS: I posted a similar topic in the iDVD forum but no answers as of yet and I am on a strict deadline (aren't we all...lol)

    You didn't mention that you were doing screen captures. That makes a difference. Camtasia is compressing your screen captures. All DVDs use MPEG-2 compression. So you are in fact double compressing your videos (which always results is lower quality).
    To get better results see if you can get Camtasia to record uncompressed, or using the Animation codec at Best. This will result in a absolutely huge file, which is what you want. You bring that into iDVD for good results. Or bring it into Compressor and then DVD SP for better results. Or a third party MPEG-2 encoder like BitVice and then DVD SP for best results. Of course using anything other than iDVD will require a couple of weeks training.

  • DVD STUDIO PRO 4 TEMPLATES QUALITY

    Is there anyone out there that uses DVD Studio Pro 4 without problems. When using the templates both the text and stills are grainy or pixelated. As a test I created a movie and stills in FCP imported them into DVDSP, the movie quality superb, the text and stills for the menus - rubbish. I then used the same content in iDVD - perfect menus. It is really annoying when you invest in Pro software and the results aren't as good as you get with a freebie!
    Is there something obvious I am doing wrong?

    fairpaul wrote:
    Is there anyone out there that uses DVD Studio Pro 4 without problems. When using the templates both the text and stills are grainy or pixelated. As a test I created a movie and stills in FCP imported them into DVDSP, the movie quality superb, the text and stills for the menus - rubbish. I then used the same content in iDVD - perfect menus. It is really annoying when you invest in Pro software and the results aren't as good as you get with a freebie!
    Is there something obvious I am doing wrong?
    Can't tell from your post if you're looking at your DVDSP project on your Mac or you have finished the project, burned the DVD, and are watching it on a tv set top box.
    To answer your first question, yes, I have no such issues with DVDSP4, I use some of the templates but not many, I usually change the typefaces, though. I have never used iDVD so I can't tell you if the results are superior in that product.
    bogiesan

  • LiveType Credit Roll Text Blurry Shaking in DVD Studio Pro Completed SD

    I first created text scrolling directly from inside FCP. The texts appear shaking/blurry in the exported MOV. After trying different font family/size but still getting the same bad result, I did more research. I then created the credit roll in LiveType, imported that into FCP. This time, the exported finished MOV looks great on computer. I thought this is the right fix but after I got everything done in DVD Studio Pro and burned a SD to test on my 50" screen SONY, the credit roll part is again shaking and blurry!! This really drove me nuts!! Well, other texts that I created both in FCP and LiveType appear just fine!! I am trying to export the credit roll texts part as self-contained mov then import back to FCP but really suspect this will fix the problem.
    That part of rolling credit texts were shaking in DVD Pro simulation but I thought that's only becuase it was not the final product. Any help will be greatly appreciated!
    p.s. I spent the past few hours googling and tried different methods but still had no luck...:(
    Thanks in advance!

    Ok...I just export a MOV with ONLY the credit roll encoded using QuickTime conversion, change the compression type to Uncompressed 8-Bit 4:2:2 which was supposed to retain the graphic/text quality better than normal setting. The completed credit roll still look shaking, however. It's white text on black, yeah I know not the best combo but there must be a way to get the text to not shake/blur...no?
    Please help, if anyone could.
    Many thanks...

  • DVD Studio Pro keeps pixelating my footage

    Despite clean source and no matter what I change out the "problem" clip with, there's a 10 second duration in the movie file that gets pixelated every time at the exact spot. Everything else on the DVD is fine.
    I'm not sure how to describe this any better, so please feel free to ask questions to clarify any details.
    Here are a few technical details about the project:
    4.1GB being burnt to a 4.7GB, single layer DVD.
    One Pass VBR.
    Bit rates: 4.0 - 6.5
    DVD Studio Pro 4 on a MacBook Pro
    I've burnt several large DVDs with this same setup, without any problems. This one, I've burnt well over 6 times on various DVD-R brands.

    DV/DVCPRO NTSC (Compressor Quality: Best)
    Try uncompressed 8 bit (takes up room, but worthwhile) Also make sure your sequence settings are BEST for scaling. If you used any renders for filters etc, you may want to delete the renders via Render Manager and re-render
    I've used several variations for that 10 second duration. Everything from animated stills to untouched video. Nothing different than what's already on the DVD.
    So this section is basically the same as all the rest in the video?
    The running time is 96 minutes.
    Definately A.Pack the audio, rough calculation is that the average bitrate can be about 6 (http://dvd-hq.info/Calculator.html & http://www.videohelp.com/calc.htm) with audio a.Pack/Dolby at 192
    I just now switched the settings to Two Pass VBR.
    Won't work on existing project properly (trying to change encodes in preferences), you are better off encoding outside of DVD SP then bringing it the encoded assets in.
    Try just exporting the problem section and see if you can get a good encode for that, will save some times as oppossed to trying to encode the whole thing, take 30 seconds, 10 seconds on either side

  • Slight pixellation on faces at end of DVD after burning in DVD Studio Pro. Can you help?

    I am appealing to those much more expert than myself. I have burned a DVD of my short film in DVD Studio Pro.
    Original file: Apple Pro Res 422 HQ (PAL 25fps)
    I put this into Compressor: Best quality DVD 90 mins.
    Then I imported this in DVD Studio Pro and burned a DVD
    The DVD looks great until the end where the faces start to go pixellated in an outdoor scene every second or so for a second.
    The thing is that this only suddenly started to happen. I had originally done the compression and burned dvds and it all looked fine, but then suddenly when I burned some extra DVDs I noticed this had happened. I recompressed the files, and it had the same problem in exactly the same place. (The original file doesn't have this problem.)
    The thing is that in between I had made a new separate DVD Studio Pro project in NTSC and imported my compressed 29.97fps Apple pro res file of the film. I'm not sure how this would have affected the original PAL project or if this has anything to do with it!
    When I originally burned the PAL DVDs I also did a second version where I exported from FCP a PAL QT of the film 720x576 and then imported this into DVD Studio Pro and let DVD Studio Pro do the rest of the compression. I am trying this again to see if this makes any difference.
    Any advice?

    Hi Christina, thanks for this. I am a bit confused exactly how many and where to put.
    You see the shot in question is a static two shot. It is used several times in the scene, but the only place I have a problem is the final time we see the shot. It is at the end of the shot and over the final 13 seconds, the faces pixellate slightly every now and then for like a frame. How many compression markers should I put in do you think?
    Thanks again for your help.

  • DVD Studio Pro Cutting off My Text

    DvD Studio Pro is cutting off the text when I have created a menu in Photoshop 8.o I read that DVDSP 4 renders text differently than 3.o but I haven't been able to solve this problem in my text menus.
    Has anyone else come across this?
    Gene
    G4   Mac OS X (10.4.10)  

    though DVDSP will sometimes support text layers in photoshop files, it' a good practice to flatten or rasterize those layers in a copy of your photoshop file before importing to DVDSP. I recommend using the photoshop templates for video frame sizes - they will use th correct pixel aspect ratio, and include guides for title safe.

  • Motion file poor quality in DVD Studio Pro

    I'm using a Motion file for my DVD menu. I have double checked to ensure that all of the dimensions are correct, however the quality of the motion file is incredibly poor in DVD studio pro. Is there something that I am missing?

    Don't trust the viewer in DVDSP. It's by no means accurate. Plus, since you're adding a Motion project to the DVDSP project, the Motion file needs to be converted to MPEG2 so that it'll play on a DVD. You could be either seeing a preview of a file that's not been converted yet, or else the encoding settings in DVDSP could be set too low.
    My recommendation would be to burn a quick DVD and view in on a TV for quality.
    Andy

  • Video quality bad when compresed from final cut pro to dvd studio pro. HELP

    Hello,
    I have a dvd project im working on and first i tried the video that i captured from final cut to just use in dvd studio pro but that didnt work. then i used the compressor and used the 60min high quality video and that looks even worse. what do u suggest i do?

    You must get to know what these settings do to be able to use Compressor. Try using a 10 second test of your video file and encoded at different settings to get a feel for how compression works.
    Min 4 and peak at 7, a difference of 3 between min and peak is a good start at CBR, but you must test.
    Just like using a video camera, if you use the same exposure setting all the time, most of your pictures will be unuseable, either too dark or too light.

Maybe you are looking for