Place dynamic field at correct position

Hi all,
I have a group in which i have created a dropdown
As per my requirement on click of a button i need to generate the same dropdown, i/p field again
I have achieved this but the dynamically created ui elements doesnt comes at the right position
ie just under the first group
Can some one please suggest me with this

Hello,
You can use the following code in the wddomodifyview() method to add elements inside the Group:
data grp type REF TO cl_wd_group.
data LR_FLOW_DATA         type ref to CL_WD_FLOW_DATA.
data button   type ref to CL_WD_BUTTON.
   button          = CL_WD_BUTTON=>NEW_BUTTON( ).
   LR_FLOW_DATA = CL_WD_FLOW_DATA=>NEW_FLOW_DATA( element = button ).
   button->set_text( value = 'Check').
grp ?= view->GET_ELEMENT( 'GRP' ).* where GRP is the id of the Group created at designtime.
grp->add_child( button ).
Thanks.

Similar Messages

Dynamic fields in PDF form

Hello Experts,
I have a requirement to design all fields in a form dynamically..!
It means if the user selects speific fields in a custom config, the form should be genarated with only those fields.
I know it can be done placing fields at design time and then hiding it later.. but I am looking for dynamic fields creation and position and setting its properties dynamically.
Thanx for Ur time.. !

hi,
Did you try creating a composite form ?? The sap.help link to creating Dynamic forms is give below
[link|http://help.sap.com/saphelp_nwce10/helpdata/en/44/bca11fc60b7006e10000000a155369/content.htm]
Hope this helps
Regards
Manthan.

How to Place the Cursor at Specific Position with-in a Char Field ?

Forms 4.5 ver.
Sun Solaris / Citrix env.
Char Field - Length 65434
How Can I Place the Cursor at "Specific Location"
with in a Field ?
with GO_ITEM('field Name') I can place the Cursor at Specific Field.
But, How Can I achieve to Place the Cursor at Specific
Position within that Field ?
I know, the starting position, length of string I want to hightlight with the Cursor.
tried using :
go_item('substr(field_name,position,length)') ;
but didn't work !
Is it possible ?
Thanks, Peri

The only cursor postion behavior that can be controled is the item property "Keep Position".
The following is the text from the on-line help for item property "Keep Position"
KEEP_POSITION Specifies whether the Keep Position property should be True or False. When Keep Position is True, the cursor returns to the same position it was in when it left the text item. When Keep Position is False, the cursor returns to the default position in the text item. Valid values are PROPERTY_TRUE and PROPERTY_FALSE.

How can we display dynamic fields from a XML CLOB?

Jdeveloper Version : 11.1.1.4.0 (11g)
We are calling a database package.procedure from a page VO and it returns a result set. The result set is mainly a XML CLOB. Within XML CLOB, we have various sections which we need to parse and display those on JSF page. Couple of sections within XML are having dynamic fields which means the number of fields returned under that section may change depending upon data conditions. We need to find technical way of displaying those dynamic fields (field name and its data – both are part of XML).
Please suggest how can this be achieved.
Thanks

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

ALV and dynamic fields

Hallo colleagues,
I have to create a dynamic structure and show it within an ALV.
Therefore I have created my stuctrure like this:
MOVE 'COMP1' TO gw_component-name.
gw_component-type ?= cl_abap_elemdescr=>get_string( ).
INSERT gw_component INTO TABLE gt_components.
MOVE 'COMP2' TO gw_component-name.
gw_component-type ?= cl_abap_elemdescr=>get_i( ).
INSERT gw_component INTO TABLE gt_components.
get structure descriptor -> GR_STRUCTDESCR
gr_structdescr ?= cl_abap_structdescr=>create( gt_components ).
create work area of structure GR_STRUCTDESCR -> GR_WA
CREATE DATA gr_wa TYPE HANDLE gr_structdescr.
ASSIGN gr_wa->* TO <gw_wa>.
So now I have my dynamic structure, but how i can create a field catalog, which fit into the function module 'REUSE_ALV_FIELDCATALOG_MERGE' and 'REUSE_ALV_LIST_DISPLAY'?
Any help?
Thanks in advance
Irian

Hi,
REPORT zmtable LINE-SIZE 255
               LINE-COUNT 65.
Program written by Vijay Chaitanya Raju
Maintain Table dynamicly (Table name is entered on Selection Screen)
Very powerfull program. Please maintain authorisation access and
restrict maintenance to Z-tables
Version 6.20 and up
(can be used in 4.6C with some modifications to block try - endtry
and classes)
Enhanced functionality with dynamic selection screen
TABLES: sscrfields.                "Fields on selection screens
TYPE-POOLS rsds.
DATA ds_clauses TYPE rsds_where.
DATA: BEGIN OF ifield OCCURS 0,
      fieldname LIKE dd03l-fieldname,
      position LIKE dd03l-position,
      keyflag   LIKE dd03l-keyflag,
      datatype LIKE dd03l-datatype.
DATA: END OF ifield.
DATA: sl_step    LIKE sy-tabix,
      ss_step    LIKE sy-subrc,
      ss_act(1) TYPE c,
      sl_lines   LIKE sy-tfill,
      sl_status LIKE sy-subrc,
      sl_subrc   LIKE sy-subrc,
      sl_update(1) TYPE c,
      sl_mandt(1) TYPE c,
      len(6)       TYPE n,
      f_value(255) TYPE c,
      sl_datum     LIKE sy-datum,
      sl_uzeit     LIKE sy-uzeit,
      price1(15)   TYPE c,
      price2(15)   TYPE c,
      mess(60)     TYPE c,
      d_stat   LIKE sy-subrc,
      m_stat   LIKE sy-subrc,
      slchar(6) TYPE c.
DATA: ref_ptr TYPE REF TO cx_root.      "Root class more common
DATA: text TYPE string.
DATA: sl_index LIKE sy-tabix.
DATA: zauth LIKE dd02l-tabname.
DATA: num TYPE i,
      max_len TYPE i,
      check_len TYPE i,
      sl_sel(1) TYPE c.
TYPE-POOLS: icon.
SELECTION-SCREEN.
SELECTION-SCREEN BEGIN OF LINE.
text-012 - 'Table Name'
SELECTION-SCREEN COMMENT 1(25) text-012.
PARAMETERS: tabname LIKE dd02l-tabname DEFAULT 'ZSCARE'.
text-003 - 'Selection'
SELECTION-SCREEN PUSHBUTTON 75(9) text-003 USER-COMMAND sta1.
SELECTION-SCREEN END OF LINE.
numrows(text) - 'Max Number of ROWS'
PARAMETERS: numrows LIKE sy-subrc DEFAULT '100'.
At Selection-Screen                                                 *
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
    WHEN 'STA1'.
      CLEAR sl_sel.
      CALL FUNCTION 'ZSTAN_SELECTIONS'
        EXPORTING
          tabname         = tabname
        IMPORTING
          ds_clauses      = ds_clauses
        EXCEPTIONS
          table_not_valid = 1
          other_error     = 2
          OTHERS          = 3.
      IF sy-subrc = 0.
        sl_sel = 'X'.
      ENDIF.
ENDCASE.
*At Selection-Screen Output                                            *
AT SELECTION-SCREEN OUTPUT.
SELECT SINGLE tabname
    INTO tabname
    FROM dd02l
    WHERE tabname = tabname
      AND as4local = 'A'
      AND ( tabclass = 'TRANSP' OR tabclass = 'POOL'
            OR tabclass = 'CLUSTER' ).
IF sy-subrc <> 0.
    MESSAGE 'Table is not valid' TYPE 'S'.
    RETURN.
ENDIF.
START-OF-SELECTION.
START-OF-SELECTION.
DEFINE: acheck.
    zauth = 'ZTABAUTH'.
    select single statu
      into sl_update
      from (zauth)
      where tabname = tabname
        and bname   = sy-uname.
    if sy-subrc <> 0.
      message 'You are not authorized to view this table' type 'S'.
      return.
    endif.
END-OF-DEFINITION.
SELECT SINGLE tabname
    INTO tabname
    FROM dd02l
    WHERE tabname = tabname
      AND as4local = 'A'
      AND ( tabclass = 'TRANSP' OR tabclass = 'POOL'
            OR tabclass = 'CLUSTER' ).
IF sy-subrc <> 0.
    MESSAGE 'Table is not valid' TYPE 'S'.
    RETURN.
ENDIF.
DATA: ptr_itab TYPE REF TO data.
FIELD-SYMBOLS: <fs_itab> TYPE STANDARD TABLE. "ANY TABLE.
CREATE DATA ptr_itab TYPE STANDARD TABLE OF (tabname).
ASSIGN ptr_itab->* TO <fs_itab>.
For DELETION
DATA: ptr_itd TYPE REF TO data.
FIELD-SYMBOLS: <fs_itd> TYPE STANDARD TABLE.
CREATE DATA ptr_itd TYPE STANDARD TABLE OF (tabname).
ASSIGN ptr_itd->* TO <fs_itd>.
For MODIFICATION
DATA: ptr_itm TYPE REF TO data.
FIELD-SYMBOLS: <fs_itm> TYPE STANDARD TABLE.
CREATE DATA ptr_itm TYPE STANDARD TABLE OF (tabname).
ASSIGN ptr_itm->* TO <fs_itm>.
DATA: ptr_wtab TYPE REF TO data.
FIELD-SYMBOLS: <fs_wtab> TYPE ANY.
CREATE DATA ptr_wtab TYPE (tabname).
ASSIGN ptr_wtab->* TO <fs_wtab>.
DATA: itabname(15) TYPE c.
itabname = '<fs_wtab>'.
Standard list status with 'SAVE' button
SET PF-STATUS 'STLI'.
CLEAR sl_update.
Maintain authorisation access in table ZTABAUTH
Key fields: tabname - Table name
             bname   = sy-uname - User name
             statu   = 'X' - maintain
                       ' ' - view
Check authorisation access
acheck.
SELECT fieldname position keyflag datatype
    INTO TABLE ifield
    FROM dd03l
    WHERE tabname = tabname
      AND fieldname NOT LIKE '.INCLU%'
    ORDER BY position.
FIELD-SYMBOLS: <f1> TYPE ANY.
DATA: tab_field(60) TYPE c,
        sline LIKE sy-lisel.
DATA: field_attr LIKE dfies.
DATA: BEGIN OF tfield_attr OCCURS 0.
          INCLUDE STRUCTURE field_attr.
DATA: END OF tfield_attr.
LOOP AT ifield.
    CALL FUNCTION 'G_FIELD_READ'
      EXPORTING
        table      = tabname
        fieldname = ifield-fieldname
        text_flag = 'X'
      IMPORTING
        field_attr = field_attr.
    tfield_attr = field_attr.
    APPEND tfield_attr.
ENDLOOP.
IF sl_sel = 'X'.
    SELECT *
      FROM (tabname)
      INTO TABLE <fs_itab> UP TO numrows ROWS
      WHERE (ds_clauses-where_tab).
ELSE.
    SELECT *
      FROM (tabname)
      INTO TABLE <fs_itab> UP TO numrows ROWS.
ENDIF.
DESCRIBE TABLE <fs_itab> LINES sl_lines.
Show two extra lines to allow addition up to 2 new lines
IF sl_update = 'X'.
    DO 2 TIMES.
      APPEND INITIAL LINE TO <fs_itab>.
    ENDDO.
ENDIF.
DATA: info(22) VALUE 'D - Delete, M - Modify'.
WRITE: / icon_information AS ICON QUICKINFO info.
WRITE ' '.
CLEAR check_len.
LOOP AT tfield_attr.
    IF tfield_attr-datatype = 'CLNT'.
      CONTINUE.
    ENDIF.
    len = tfield_attr-outputlen.
    IF tfield_attr-keyflag = 'X'.
      check_len = check_len + len + 1.
    ENDIF.
    IF tfield_attr-scrtext_m IS NOT INITIAL.
      WRITE: AT (len) tfield_attr-scrtext_m COLOR 1.
    ELSE.
      WRITE: AT (len) tfield_attr-fieldtext COLOR 1.
    ENDIF.
ENDLOOP.
CLEAR ss_step.
CLEAR ss_act.
LOOP AT <fs_itab> INTO <fs_wtab>.
    IF sy-tabix LE sl_lines.
      ss_step = 1.
    ELSE.
      CLEAR ss_step.
    ENDIF.
In field SS_STEP put D - to delete record
                     M - to modify/add new record
    IF sl_update = 'X'.
      WRITE:/ icon_change AS ICON.
      IF ss_step = 1.
        WRITE: ss_act INPUT ON.
      ELSE.
        ss_act = 'M'.
        WRITE: ss_act.
        CLEAR ss_act.
      ENDIF.
    ELSE.
      WRITE:/ icon_display AS ICON.
      WRITE: ss_act COLOR 2.
    ENDIF.
    LOOP AT ifield.
Maintain client dependant tables in the same client
      IF ifield-datatype = 'CLNT'.
        sl_mandt = 'X'.
        CONTINUE.
      ENDIF.
      CONCATENATE itabname '-' ifield-fieldname INTO tab_field.
      ASSIGN (tab_field) TO <f1>.
      IF sl_update = 'X'.
        IF ifield-keyflag = 'X' AND ss_step IS NOT INITIAL.
          WRITE: <f1> COLOR 4.
        ELSE.
          WRITE: <f1> INPUT ON.
        ENDIF.
      ELSE.
        IF ifield-keyflag = 'X' AND ss_step IS NOT INITIAL.
          WRITE: <f1> COLOR 4.
        ELSE.
          WRITE: <f1> COLOR 2.
        ENDIF.
      ENDIF.
      UNASSIGN <f1>.
    ENDLOOP.
ENDLOOP.
END-OF-SELECTION.
END-OF-SELECTION.
AT USER-COMMAND.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'SAVE'.
      IF sl_update = 'X'.
        CLEAR: sl_step,
               sl_status,
               sl_subrc,
               <fs_wtab>,
               d_stat,
               m_stat,
               max_len.
        REFRESH <fs_itd>.
        REFRESH <fs_itm>.
        DO.
          IF sl_status <> 0.
            EXIT.
          ENDIF.
          ADD 1 TO sl_step.
          IF sl_subrc <> 0.
            EXIT.
          ENDIF.
          CLEAR ss_step.
          CLEAR ss_act.
          READ LINE sl_step
               FIELD VALUE ss_act INTO f_value.
          sl_subrc = sy-subrc.
          IF f_value(1) EQ 'D' OR f_value(1) = 'd'.
            ss_step = 1. "Delete
          ELSEIF f_value(1) EQ 'M' OR f_value(1) = 'm'.
            ss_step = 2. "Modify
          ELSE.
            CLEAR ss_step.
          ENDIF.
          CHECK sy-lisel(3) = '0Z '.
          IF ss_step GT 0.
            CLEAR sline.
            sline = sy-lisel+5(250).
            max_len = 250.
            CHECK sline(check_len) <> ' '.
            LOOP AT tfield_attr.
              CONCATENATE itabname '-' tfield_attr-fieldname
                                              INTO tab_field.
              ASSIGN (tab_field) TO <f1>.
              IF tfield_attr-fieldname = 'MANDT'.
                <f1> = sy-mandt.
              ELSE.
                CLEAR f_value.
                IF max_len LT tfield_attr-outputlen.
                  max_len = 255.
                  ADD 1 TO sl_step.
                  READ LINE sl_step.
                  sline = sy-lisel.
                ENDIF.
                f_value = sline(tfield_attr-outputlen).
                max_len = max_len - tfield_attr-outputlen - 1.
                IF tfield_attr-inttype = 'D'.
                  IF f_value CO ' 0./-'.
                    CLEAR sl_datum.
                    <f1> = sl_datum.
                  ELSE.
                    CALL FUNCTION 'CONVERT_DATE_INPUT'
                      EXPORTING
                        input                     = f_value
                        plausibility_check        = 'X'
                      IMPORTING
                        output                    = sl_datum
                      EXCEPTIONS
                        plausibility_check_failed = 1
                        wrong_format_in_input     = 2
                        OTHERS                    = 3.
                    IF sy-subrc = 0.
                      <f1> = sl_datum.
                    ELSE.
                      text = 'Invalid Date'.
                      sl_status = 1.
                      EXIT.
                    ENDIF.
                  ENDIF.
                ELSEIF tfield_attr-inttype = 'T'.
                  IF f_value CO ' 0:'.
                    CLEAR sl_uzeit.
                    <f1> = sl_uzeit.
                  ELSE.
                    CALL FUNCTION 'CONVERT_TIME_INPUT'
                      EXPORTING
                        input                     = f_value
                        plausibility_check        = 'X'
                      IMPORTING
                        output                    = sl_uzeit
                      EXCEPTIONS
                        plausibility_check_failed = 1
                        wrong_format_in_input     = 2
                        OTHERS                    = 3.
                    IF sy-subrc = 0.
                      <f1> = sl_uzeit.
                    ELSE.
                      text = 'Invalid Time'.
                      sl_status = 1.
                      EXIT.
                    ENDIF.
                  ENDIF.
                ELSEIF tfield_attr-inttype = 'C'.
                  TRANSLATE f_value TO UPPER CASE.
                  <f1> = f_value.
                ELSE.
                  TRANSLATE f_value USING ', '.
                  CONDENSE f_value NO-GAPS.
                  TRY.
                      <f1> = f_value.
                    CATCH cx_root INTO ref_ptr.
                      text = ref_ptr->get_text( ).
                      sl_status = 1.
                      EXIT.
                  ENDTRY.
                ENDIF.
                SHIFT sline BY tfield_attr-outputlen PLACES.
                SHIFT sline LEFT.
              ENDIF.
              UNASSIGN <f1>.
            ENDLOOP.
            IF sl_status = 0.
              CASE ss_step.
                WHEN 1. "Delete
                  ADD 1 TO d_stat.
                  APPEND <fs_wtab> TO <fs_itd>.
                WHEN 2. "Modify
                  ADD 1 TO m_stat.
                  APPEND <fs_wtab> TO <fs_itm>.
              ENDCASE.
            ENDIF.
          ENDIF.
        ENDDO.
        IF sl_status = 0.
          IF d_stat IS NOT INITIAL.
            slchar = d_stat.
            CONCATENATE 'Deleted -' slchar 'record.' INTO text
              SEPARATED BY space.
            DELETE (tabname) FROM TABLE <fs_itd>.
          ENDIF.
          IF m_stat IS NOT INITIAL.
            slchar = m_stat.
            CONCATENATE text 'Modified -' slchar 'record.' INTO text
              SEPARATED BY space.
            MODIFY (tabname) FROM TABLE <fs_itm>.
          ENDIF.
          IF d_stat IS INITIAL AND m_stat IS INITIAL.
            MESSAGE 'No changes were done' TYPE 'S'.
          ELSE.
            MESSAGE text TYPE 'S'.
          ENDIF.
          LEAVE.
        ELSE.
          MESSAGE text TYPE 'I'.
          EXIT.
        ENDIF.
      ELSE.
        LEAVE.
      ENDIF.
ENDCASE.
*--END--
Below is Function for a Dynamic Selection Screen
FUNCTION zstan_selections.
""Local interface:
*" IMPORTING
*"     VALUE(TABNAME) LIKE DD02L-TABNAME DEFAULT 'ZSCARE'
*" EXPORTING
*"     VALUE(DS_CLAUSES) TYPE RSDS_WHERE
*" EXCEPTIONS
*"      TABLE_NOT_VALID
*"      OTHER_ERROR
DATA texpr TYPE rsds_texpr.
DATA twhere TYPE rsds_twhere.
DATA trange TYPE rsds_trange.
DATA BEGIN OF qcat.                    "Selections View for
          INCLUDE STRUCTURE rsdsqcat.    "Free Selectoptions
DATA END OF qcat.
DATA BEGIN OF tabs OCCURS 10.
          INCLUDE STRUCTURE rsdstabs.
DATA END   OF tabs.
DATA BEGIN OF fields OCCURS 10.
          INCLUDE STRUCTURE rsdsfields.
DATA END   OF fields.
DATA BEGIN OF efields OCCURS 10.
          INCLUDE STRUCTURE rsdsfields.
DATA END   OF efields.
DATA selid LIKE rsdynsel-selid.
DATA actnum LIKE sy-tfill.
DATA title LIKE sy-title VALUE 'Selection Screen'.
DATA: maxnum LIKE sy-subrc VALUE '69'.
CLEAR    tabs.
tabs-prim_tab = tabname.
COLLECT tabs.
DATA: position LIKE dd03l-position.
DATA: keyflag LIKE dd03l-keyflag.
CLEAR fields.
fields-tablename = tabname.
fields-sign      = 'I'.
DATA: step LIKE sy-subrc.
SELECT fieldname keyflag position
    INTO (fields-fieldname, keyflag, position)
    FROM dd03l
    WHERE tabname = tabname
      AND fieldname NOT LIKE '.INCLU%'
      AND datatype NE 'CLNT'
    ORDER BY position.
    ADD 1 TO step.
    CHECK step LE maxnum.
    IF keyflag <> 'X'.
      efields = fields.
      APPEND efields.
    ENDIF.
    APPEND fields.
ENDSELECT.
IF sy-subrc <> 0.
    RAISE table_not_valid.
ENDIF.
CALL FUNCTION 'FREE_SELECTIONS_INIT'
    EXPORTING
      expressions              = texpr
      kind                     = 'F'
    IMPORTING
      selection_id             = selid
      expressions              = texpr
      where_clauses            = twhere
      field_ranges             = trange
      number_of_active_fields = actnum
    TABLES
      tables_tab               = tabs
      fields_tab               = fields
      fields_not_selected      = efields
    EXCEPTIONS
      fields_incomplete        = 01
      fields_no_join           = 02
      field_not_found          = 03
      no_tables                = 04
      table_not_found          = 05
      expression_not_supported = 06
      incorrect_expression     = 07
      illegal_kind             = 08
      area_not_found           = 09
      inconsistent_area        = 10
      kind_f_no_fields_left    = 11
      kind_f_no_fields         = 12
      too_many_fields          = 13.
IF sy-subrc = 0.
    CALL FUNCTION 'FREE_SELECTIONS_DIALOG'
      EXPORTING
        selection_id            = selid
        title                   = title
      IMPORTING
        where_clauses           = twhere
        expressions             = texpr
        field_ranges            = trange
        number_of_active_fields = actnum
      TABLES
        fields_tab              = fields
      EXCEPTIONS
        internal_error          = 01
        no_action               = 02
        no_fields_selected      = 03
        no_tables_selected      = 04
        selid_not_found         = 05.
    IF sy-subrc = 0.
      CLEAR ds_clauses.
      MOVE tabname TO ds_clauses-tablename.
      READ TABLE twhere WITH KEY ds_clauses-tablename INTO ds_clauses.
      IF sy-subrc <> 0.
        RAISE other_error.
      ENDIF.
    ELSE.
      RAISE other_error.
    ENDIF.
ELSE.
    RAISE other_error.
ENDIF.
ENDFUNCTION.
Regards,
Shiva

Get input for 100 dynamic fields in a single screen

Hi all
I got one requirement wherein i need to accept input for around 100 dynamic fields in a single screen. screen can scroll down if possible.
Can anyone tell me whether it is possible. if yes please let me have the sample code.
Thanks
Ravindra Suvarna

Ravi,
Probably a TAB STRIP might help you.
Seggregate your 100 fields logically, say 5 groups.
Have a TAB STRIP CONTROL, with 5 tab strips and place 20 fields in each of the tabs. Each tab strip will have a sub screen.
Regards,
Ravi
Note : Please mark the helpful answers.

Dynamic field labels in table control

Hi experts,
My requirement is to display dynamic field labels in table control can we do this. I am much aware
that we can do it in alv_grid. Please let me know.
Thanks in advance.
Sri

Hi Anubhab,
Thanks. With your help i could able to solve the problem. Let me put this in some
more detail.
When we are pulling the field from a table to table control we need to make sure the fields should have a data elements. After pulling all the fields to a table control ,we need to drag out and delete the current table control column headings and then drop in the (new) I/O fields into their place. I then set the text on these new fields within the PBO. If we try to drop the (new) I/O fields on top of the existing ones with out deleting it won't work.
Thanks & Regards.
Srikanth

LiveCycle Designer 8 Saving Dynamic Field Problem

Just updated to LiveCycle Designer 8 to get around the issue with my users not being able to save the PDF form data. Now my users can save the data using Acrobat Reader 8 but my dynamic fields are not working correctly.
I have several fields that when you click a certain radio button or check a certain box, a previously invisible text field becomees visible. If one of those boxes is checked and data is entered in the now visible text field, then the users saves the form and reopens it, the data is saved but the field is invisible. Viewing the XML output confirms that the data is still there. When the form is reopened the checkbox that makes the field visible is still checked. But to see that data entered in the text field, you have to uncheck and then recheck the box to get the invisible field to become visible once more. Any idea on how to correct this "feature"?
Thanks, Debra

Hi Debra,
To correct this 'feature', go in Form Properties > Defaults tab, set the Preserve Scripting Changes To Form When Saved option to Automatically.
To correctly using Designer 7.x, youll have to write some script to achieve the same result. Currently, you have a script setting the fields state. All you need is to run the same script when the form is opened. In the example below, a form:ready script will execute the change event script when the form is opened. You can use the docReady event as well.
For example:
RadioButtonList: change event
if (this.rawValue == "1")
TextField1.presence = "visible";
else
TextField1.presence = "invisible";
RadioButtonList: form:ready event
this.execEvent("change");
Hope this helps,
Hélène
Adobe Systems

Customize Proposal Dynamic Fields

Hi
I have a requirement like,
When we include Quote Line Dynamic Fields in RTF Components, While generating the proposal i have to customize only the Quantity of Quote Lines.
Example Like :
<@PRPSTR001: Start Quote@>
**QTY Model # Item Description Unit Price Line Total**<@PRPSTR003: Begin Quote Line@>
*<@PRPQOT046:Line Quantity@>* <@PRPQOT043:Item Number@> <@PRPQOT044: Product Description@> $<@PRPQOT048:Line Unit List Price@> $<@PRPQOT052:LineTotal Selling Price@>
<@PRPSTR004:End Quote Line@>
Quote Sub Total (USD): $<@PRPQOT027: Total Selling Price@>
<@PRPSTR002: End Quote@>
My Requirement is to only customize *<@PRPQOT046:Line Quantity@>*
How can i achieve this?
Can any body give idea on this..
Awaiting for your response.
Regards,
Hari K

You can add whatever you like to whatever field, although some have format restrictions. I have a set of tracks where I use year to store a serial number. I just have to remember that its a serial number in the year field. I also have coded data in the BPM field. I put album identifiers in "Grouping".
Track tags are stored with most files and are intended to be compatible between platforms and hardware. I think if one were to allow renaming of all the track fields it would likely result in a big mess and probably iTunes would get flooded with more comments from people who couldn't get their track information to appear in the correct field (because they had completely messed things up, including all the tags with music downloaded from iTunes Store) than the one or two comments a week from people wishing customizable tags.

Dynamic Fields and Images

Hi Folks,
I have to prepare some PDFs using indesign that will be used for Invoices. Our developers want to be able to add the logo and certain fields dynamically. I wanted to find out is there anything special i need to know to do to make the fields and logo updateable dynamically in the output PDF. What is this topic even under? Would it be a scripting thing? I tried Googling around to find answers but had no luck.
Just to give you an example of what I mean by dynamic fields.... i might have a field title "Surname" with text box alongside. My developers should be able to insert the correct surname into that text box when displaying the PDF
Thanks for your help community!

is the PDF generated in indesign going be used as a graphic for the Management Information System (MIS) to put data over the top of, or are "the developers" attempting to use indesign as a database query tool?
indesign's data merge has limited capabilities and using it as a "back end" to generate invoices is something that IMHO is beyond its scope.
can the OP please give more information so that a more properly formed answer can be given?

When I send an email with a photo from snow leopard to email of a lion user, the photo shows up in the Lion email sideways. When they email it back it returns to correct position. Is there something in Lion causing this?

When I send an email via MACMAIL with a photo from snow leopard to an email of a lion user using At & T , the photo shows up in the Lion user email sideways. When they email it back it returns to correct position. Is there something in Lion causing this? This also happens when in in using iphoto'11 i share/email a photo to myself and the phot shows up sideways but is in a correct position prior to emailing.

I recently tried sending myself an email through Thunderbird to another email account to see if that was the case, but the email came in with a font so tiny that it was unreadable. I had chosen a font type and size (arial 10) and just coming into my outlook inbox was virtually unreadable.
And referring to the person I work with, she doesn't have problems getting anyone else's emails, just ones I send from Thunderbird.

How to place stamp that will change position depending on language version of the PDF

Hi there,
For all of our publications (several types of instruction guides), we are trying to find a solution to place two small black stripes (about 8 mm) at the foot of each PDF. These black stripes have to define what language and what model you have in your hands. After cutting the paper at the printer, only 2 mm of those bars will remain visible. On the left half of the PDF we want to place a language bar indicating what language the publication is. The position for that bar will be unique (English = 10 mm from left border of page; French = 8 mm from left border; and so on until 20 languages).
And another bar will have to be place on the right half of the page, indicating what model it is. This position will be again unique.
We know it's possible inserting stamps on a final PDF. But the key for this job is being able to place them at the exact position. And also creating stamps that can be selected by the operator depending on the languages and models we will send to print (let say we created final PDF for the model B, in German; so the operator can open final PDF in ACrobat, stamp the whole document with the stamp "German", and then once more with the stamp "model B").
Does anybody have a tip how to approach this?
Thanks a lot!

Have you considered using the watermark tool to add this information instead of a stamp? You could store all the watermarks in separate files and control the exact placment.

Sum for Dynamic Fields in a Dynamic Table with Field Symbol

Hi All,
I currently have an report which I am looking to update with some totals. The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol. The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime. I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated. I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here. I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
Below is a simple sample of what the report currently looks like and what we are looking to add.
====================================================================================
As-Is Report:
DETAILED DATA ALV
Company Code | Plant | 2006 Total | 2007 Total | 2008 Total | CURRENCY
0001          |   ABCD |    1,500     |    1,200     |    1,700    |    USD
0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
0003          |   DBCA |    3,200     |    1,600     |    6,200    |    USD
Addition 1:
TOTALS PER CURRENCY
Currency                | 2006 Total | 2007 Total | 2008 Total |
USD              |    4,700     |    2,800     |    7,900    |
GBP                       |    2,300     |    4,100     |    3,600    |
Addition 2:
CONVERSIONS TO USD
                                      | 2006 Curr   | 2006 USD    | 2008 Curr   | 2006 USD   |
USD                       | 4,700 USD   | 4,700 USD   | 7,900 USD | 7,900 USD |
GBP   (1.5GBP/1 USD)    | 2,300 GBP   | 1,150 USD   | 2,300 GBP | 1,800 USD |
====================================================================================
Any recommendations will be appreciated.

Hi,
We cannot use the key word SUM in the loop at assigning statement.
The way i see is
When you are creating the first dynamic internal table , create one more with the structure below:
Currency | 2006 Total | 2007 Total | 2008 Total |
Then while populating the data into first itab,also move the contents to the second itab using collect statement.

Dynamic field value in Sales order item table control

Hi
I need to find the VBAP-VKAUS (Usage indicator) field value in run time of the creation of sale order ...these values stored in the table TVLV.
when i debug the program SAPMV45A in the screen 4900 this VBAP-VKAUS value gets empty in structure VBAP even though i can see other values like MATNR etc...
this field is configurable (dynamic) field and not appear for all the ordertypes.
i need to pass this VBAP-VKAUS value to KOMPD-VKAUS
Thru user-exit..so please let me know if somebody knows how to find this VBAP-VKAUS value.
Thanks in advance
Madi

hi,
Plz Check the struc KOMP/KOMK. Let me know, if this helped.
Rgds,
Raghu.

How to convert internal table with dynamic fields to XML

Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PM

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

Place dynamic field at correct position

Similar Messages

Maybe you are looking for