Placing Images Infront of Objects

So I want to place my thumbnail gallery infront of a giant black bar that I have which encases the images.
this black bar was created using the rectangle tool and then filled in with black and opacity brought down to 30%, then it is placed on top of the thumbnail gallery but I cant select any of the images because I am assuming this bar is now infront of it.
I have tried both sending to back and front
as well as sending to Master foreground and Master background
If I send the black bar to Masterbackground for some reason it sends it behind the large image I have displayed with the thumbnails.
Also if Text is in this black bar, I can select the text box but for some reason I cant select the thumbnail box in it
Help?

Yes I sure can
The First image you see shows two pictures in one
The bottom shows my contact and home which is red meaning its in the foreground
and the thumbnail above (same master page) shows it in blue with no option (grayed out) to send to foreground
When I go to my slave page I do not have the option to even edit anything pre existing (Unlock everything on page and still nothing)
So I am stuck editing on my masterpage which does not work with what Aishvarya said
What Am I doing wrong here?

Similar Messages

Placed image hides graphic objects on master

Mac OS 10.8 \ ID CS5
Rectangular frame created on master \ photo corners created in InDesign for each of the four corners
In the document page when an image is placed in the frame, the image hides the portion of the corners that lie within the frame
I tried bring to front for corners - no joy - can't seem to send frame to back
I can copy the corners from the master page and paste in place on the document page - works fine - full corners show with image below
With 50-75 anticipated pages and about 75 photos, I need a better way. Help, please?
Message was edited by: FroggyGreen

Make a new layer (above the current one).
Go to your Master page and move the elements you want in front to the new layer.

Getting the filename of a placed image inside a smart object

Hi
I'm wondering if I can get any help with a problem I'm trying to overcome for a friend of mine.
My friend is a photographer who does a lot of schhols work (pupil portraits) and wants to create a little document similar to this (very simplified) version:
I'm trying to help him to create a batch process so that he can make this take up much less of his time!
Here's where I've got to so far. I've created the layout above which is essentially a smart object (from an external file) manipulated in a couple of ways.
The workflow as I see it at the moment (although I'm wide open to suggestions, and I'm having a bit of Friday brain) is this: I generate an action that replaces the content of the external file with the contents of (each file in his incoming list, sequentially).
That file then comes back into the layout above and a new (flattened) copy is saved out from there.
Rinse and rerpeat through the list of incoming files.
I can just about make that bit happen using actions, but here's what I can't get - the filename of the incoming file (the one that's placed in the smart object). Can I can use a modified version of the AddFileName script to generate a text layer based on the filename of the placed contents in the smart object? Does any of that make sense? I'm reading this back to myself and even I'm not sure! ho ho.
My lack of logic/coherent sentence structure here is what probably holds me back in any eforts I have made in getting into scripting.
I'd appreciate any help that could be offered.
Thanks.
Fenton

Ah - alas it sems not to be. I think I am going to have to come up with a different workflow and by extension, solution. My current thinking is that I need to have an input folder for the images to be used in the layout, and an output folder for the results to be saved into, along with the layout.psd (as above) all housed in the same folder. Then I need (help) to write a script that does the following:
Checks that the layout document is open (that bit is easy enough)
if(documents.length==0){
   alert("You need to have your layout template open (-layout.psd-)")
}else{
    // Do next bit here - and what I'm trying to do is described below.
    // Hopefully by typing it out I might start to get it straight in my head
    // Any help with any part of this process is greatluy appreciated
    // I'm trying to learn!
Then what I think the script needs to do is tocheck the contents of the input folder and find out how many files are in it then set this as a variable, to set the length of a loop, maybe? Or should it load the filenames as an array and work through them sequentially?
Once that information is established, there is a smart object on the first layer that needs to be updated with the contents of the first file - my thinking s that this is done by the script opening each image, and then copy/pasting into the smart object, merging down (so I don't end up with an enormous multi-layered file). My reason for thinking this would be a good idea would be that I could just run a quick check to make sure that no landscape pics have sneaked in there and if they have, rotate them (which again, is pretty easy as even I could do that bit, too).
doc = activeDocument;
            if (doc.height < doc.width) {
              doc.rotateCanvas(90);
            } else {
              // Carry on
This will update all of the smart object instances throughout the layout template.
Then the text underneath the main image needs to be updated with the filename of the file that has been pasted in the smart object, and after that a [flattened] copy saved out to an output folder.
Rinse and repeat for the remaining images in the input folder.
Any thoughts?
Thanks
Fenton

Change stacking order of placed images/objects?

Hello All,
Is it possible to change the order of placed images in a PDF?
I have a PDF with several objects in it, I want to be able to place an image into the PDF, and have it appear behind some of the objects and in front of others... is this possible?
Example, let's say I have a PDF with a cartoon/comic word or thought bubble in it... I want to be able to place an image of my friend behind the word bubble object.
I have Acrobat 9.0 Pro
Thanks!

As far as AS3 goes, I don't know what you mean, but it can be used pretty much the same way you use AS2, with the exception that in AS3 you cannot place code "on" object like you can in AS1/AS2... all code must be on the timeline. Beyond that, there is no difference beyond alot of the code being different between the two languages. The timeline remains as a place to build things in if you choose to.
As far as your question goes, yes, you can have a rollover of a movieclip assign text to a textfield within it. Let's say you're using AS2 and you have a movieclip named "button1" that contains a textfield named "tf1". Code for that could be...
button1.onRollOver = function(){
button1.tf1.text = question1;
And if you wanted to make tit so that clicking that same button shows the answer....
button1.onRelease = function(){
button1.tf1.text = answer1;

How to place raster images as smart objects?

I'm trying to duplicate Photoshop's File:Place menu functionality and I'm experiencing something that I can't figure out. (I've added my code to the end of this message.)
I have a variety of test EPS images that I can run through the File:Place menu. They all appear on the document as "Smart Objects". That is I can then do a bunch of transforms to the image (like rotate, move, deform) before committing to the image to the document.
The important point here is that some images, when opened by Photoshop, first ask that I "Rasterize EPS Format" while others just open up without comment.
While doing these File:Place actions, I've been using the Listener plugin that comes with the SDK to generate code dumps of my actions. From these I've then generated my own code for placing images onto a document. I've had to re-arrange the code a bit to work in Objective-C so there's a good chance that I've done something wrong while translating.
Now if you look at my code you notice a commented out section. If you uncomment those lines then you basically have what I got from the Listener plugin log. But the problem is that this code then doesn't act like the File:Place menu action. It creates a new layer, places the image on the page - but its gone one step too far and the image is no longer a "Smart Object". The image is committed to the layer.
With a bit of experimenting I commented out the line that you can see commented out in my code. However, this does something odd. For all images you can see Photoshop put up a busy icon for a few seconds showing that it is process, but only images that Photoshop wants to "Rasterize EPS Format" actually appear on the page as Smart Objects. Trying to place the images that Photoshop doesn't rasterize results in nothing appearing.
That's my problem. If I uncomment that line in my code then all images that I test with appear on the page - but not as Smart Objects. If I comment out the code then only images that Photoshop wants to rasterize appear - but those that do appear then appear as Smart Objects.
So that's my goal: to place any image onto a document as a Smart Object just like Photoshop's File:Place menu command does. Any ideas where I'm going wrong?
- (SPErr)photoshopPlayeventPlace:(char *)cPath
PIActionDescriptor result = NULL;
Auto_Desc descriptor;
Auto_Desc offsetDetails;
SPErr error = kSPNoError;
Handle aliasValue = NULL;
FullPathToAlias(cPath, aliasValue);
do
error = sPSActionDescriptor->PutAlias(descriptor.get(), keyNull, aliasValue);
if (error) break;
// error = sPSActionDescriptor->PutEnumerated(descriptor.get(), keyFreeTransformCenterState, typeQuadCenterState, enumQCSAverage);
// if (error) break;
error = sPSActionDescriptor->PutUnitFloat(offsetDetails.get(), keyHorizontal, unitDistance, 0);
if (error) break;
error = sPSActionDescriptor->PutUnitFloat(offsetDetails.get(), keyVertical, unitDistance, 0);
if (error) break;
error = sPSActionDescriptor->PutObject(descriptor.get(), keyOffset, classOffset, offsetDetails.get());
if (error) break;
error = sPSActionControl->Play(&result, eventPlace, descriptor.get(), plugInDialogSilent);
if (error) break;
while (false);
if (result != NULL) sPSActionDescriptor->Free(result);
if (aliasValue != NULL) sPSHandle->Dispose(aliasValue);
return error;

If you want to go with Batch I would recommend creating an Action of more or less these steps:
• set the resolution to the same as the background image’s
• change the image from Background Layer to regular Layer if necessary
• convert it to a Smart Object
• add a Drop Shadow Layer Style to the image (do not use Global Angle)
• place the background image (File > Place …)
• move it behind the image layer
• Image > Reveal All
• make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
• select and transform the image layer to fit the intended position
This would naturally work out best if the images had the same size and proportions.
For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

Add Strokes to Placed Images in Illustrator

Hi All,
I'm having a problem to add a stroke "frame" around my tiff image in Illustrator. My image is a "traced picture" from Photoshop. I used the following technique:-
Technique: Use an Effect
Choose File > Place and select an image to place into Illustrator document.
Choose File > Place and select an image to place into Illustrator document.
The image is selected. Open Appearance panel and from the Appearance panel flyout menu, choose Add New Stroke.
With the Stroke highlighted in the Appearance panel, choose Effect > Path > Outline Object.
However, the result I got was the stroke around the image NOT the frame around the image.
How do I achieve it. Any help and tips are greatly appreciated. Thanks in advance.

Technique #1: Use a Mask
This technique requires Illustrator CS3 and works only when your keyline will be rectangular in shape.
Choose File > Place and choose an image to place into your Illustrator document. You can either Link or Embed the image. Once you've chosen the image, click the Place button.
The image is selected (if your image already exists in your document, select it now), so if you look in your Control panel at the top of the screen, you'll see a button labeled "MASK". Click on it. This creates a mask at the exact bounds of the image.
Press the "D" key for Default. This gives the mask a black 1 pt stroke attribute. Adjust the stroke per your design needs.
NOTE: An additional benefit to this method of using a mask is that you now have the elements in place to simulate a "frame and image" paradigm like InDesign. Once you've created your mask, you can decide to "crop" your image by double clicking anywhere on the photo. This will put you into Isolation Mode. Now click on the frame edge and resize at will. When you're done, double click outside the image to exit isolation mode and continue working. This method works wonderfully when you're using the Selection tool (black arrow) and have the Bounding Box option turned on (in the View menu).
Technique #2: Use an Effect
At first, it may seem that applying a keyline with the use of an Effect is a tedious process. But we all know that once we've applied an effect, we can store it as a Graphic Style, at which point applying our keyline will become a single click. Go ahead, ask me why Adobe doesn't ship Illustrator with such an effect as a default setting in the NDPs (New Document Profiles). Go ahead, ask me why Adobe doesn't allow us to assign keyboard shortcuts to styles like InDesign does. I don't have answers to either of those questions (sorry). But let's get on with the styles, shall we?
There are two separate effects that we can use, and each provides a different benefit.
Choose File > Place and select an image to place into your Illustrator document. You can either Link or Embed the image. Once you've chosen the image, click the Place button.
The image is selected (or if your image already exists in your document, select it). Open your Appearance panel and from the Appearance panel flyout menu, choose Add New Stroke. We can't see the stroke yet, because all we have is an image. But we'll change that in short order.
With the Stroke highlighted in the Appearance panel, choose Effect > Convert to Shape > Rectangle. Check the Preview button, select the Relative option, and set both the Extra Width and Extra Height to zero (0). (Be careful not to press Tab after you enter the second value, or it will switch back to Absolute.) Click OK to apply the effect. Style the stroke attribute to match your design preference.
Now make this easier to apply in the future. With the object still selected, open the Graphic Styles panel and click the New Graphic Style button at the bottom of the panel. Give the style an appropriate name. If you then add this style to your NDPs, it will be readily available in all new files that you create.
Add Strokes to Placed Images in Illustrator | CreativePro.com

Problem with photoshop automatically resizing placed images

Hi,
I have PS6. I have images that are 144x100 px. When I use file>place ps resizes the image to 108x75. I can't figure out how to make ps quit resizing my pictures. Anybody know?
Thanks

When Pasting, Dragging, copying and placing an image Photoshop will copy all of the image being duplicated original pixels to preserve the image pixel quality the image quality. If the receiving document has a different DPI resolution the image may look a different size in the receiving documents because of the number of pixels added to the document that has a lower or higher dpi resolution. If the image is being placed in if the image pixels exceeds the receiving documents canvas size. Photoshop may scale the smart object layer to fit within the canvas that depends on the users Photoshop's preference. All of the images original pixels are still there in the embedded object. In my Photoshop Collage Scripts I always transform all placed images to 100% size incase Photoshop scaled the placed image. For you can not get the scale percent Photoshop used. Once I know I have the image at 100% size I can use the layer bounds to get the actual number of pixels there are in the placed image. Once I know that I can calculate the scale I need to use to resize the image to fit the area being populated in the collage template. Once resized I center it into place and mask off any excess image pixels.

White lines appear around placed images in printing.

A native Illustrator document with placed Photoshop (both CS6) images produces whites lines around the placed images when printed. The Illustrator document does not show white lines on screen. Nor does the PDF (Acrobat X Pro) generated from the IA doc show white lines when viewed on screen. When the document goes to press, the printed product show the white lines:
See upper left image and lower right image-note: other images are not affected. Both both are native Photoshop images, placed on a gradient in IA. Perhaps the PDF settings: "Adobe PDF Preset" or "Standard" are not chosen correctly? Why the white lines?

You screenshot shows a modified Illustrator Default preset with Compatability to Acrobat 4. That setting always flattens transparency which is what I would suggest avoiding first.
Note the Warnings summary alerts that transparency will be flattened.
garlic541 wrote:
2.That same initial 'Save Adobe PDF' widow allows for three settings: Adobe PDF Preset (12 choices); Standard (6 choices), and Compatibility (5 choices). Note how the window signals a Warning (Warnings: Saving this file with Compatibilty set to Acrobat 4 (PDF 1.3) requires items with transparency to be flattened.) Could this be a warning that produces the stitch lines in the actual printing?
Yes
garlic541 wrote:
After researching....
Discussion seems to indicate seeing 'stiching lines' on screen; sometimes in the designing application; or in the generated PDF. My instances are visible only in printing-in two of the four images.
1. Transparency. Is this an automatic occurence in generating the PDF? Can I turn it on/off? (The 'Save Adobe PDF' window that allows changes to: General, Compression, Marks & Bleeds,Output,, Advanced.....)
Transparency is part of some design and all Effects. Note that you can change a color by using a tint or by setting it's transparency. Many times a tint will suffice. It looks the same and has the same values.
Your original screenshot apears to use images with clipping paths. (Full disclosure - I should know this, but don't...I expect) clipping paths require/invoke the transparent background to place the images within the colored area.
You cannot get around transparency but flattening converts vector objects to raster objects (when transparency touches/abuts/interacts with raster images).
You should be able to use the Illustrator Default, High Quality Print or PDFX-4 to maintain live transparency
2 very old (2004) Adobe white papers, not too legnthy which I can shed some light. Note - PDFX-4 superceeds all of these.
Transparency in Adobe Applications: A Print Production Guide
A Designer's Guide to Transparency for Print Output

How do I make a placed image the full width of the browser?

Hi, I've tried adding the image as the browser fill only to have it shuffling all other placed objects out of wack.
I've also tried having it as a placed object but, when I preview in browser I can't seem to be able to get it the full which of the screen.
my website is 1000 px wide, the image I'm trying to place in it is 5147x2668

Thanks for the response Vivek,
Tried that but no joy, it seems I've tried everything I can think of. I tried setting the the image as a browser fill. Very confused. It actually seems to be something to do with the page width or something. Using your method I successfully got the menu bar and the 100% width placed image the same width (previously they were different width's), but my whole site, when previewed just isnt the width of the browser. I must say I'm lost, I've tried changing the site properties (page width, margins etc.) I'm new to Muse but have studied it quite thoroughly over the last 6 weeks. Now I'm ready to build my site I seem to have tripped at the first hurdle here's a screenshot of what I'm getting when veiwed in a browser, as you can see it's all a bit shrunk down:
and what I'm seeing in Muse's design page:

Placing images in Illustrator

Hi Adobe Community,
Do placed images in illustrator have to be in vector form before you can expand or convert them to compound paths?
Or is there a way of just using the placed images without having to trace it?
The reason I ask is because I wanted to use the pathfinder pallete to separate, join or intersect objects along with the rest of its functions instead of simply clipping.
Unfortunately, when I try and use the pathfinder options with a placed image without tracing it, it says the objects needs to be a path first. And I don't want to trace the image either because it just converts it to black and white when I'm only concerned with maintaining the original look.
Thanks in advance for your help.

paths are strings of vectors. if you want to use functions that involve intersecting objects made up of paths, then yes, they have to be vectors.

How to find out the Pixel Dimensions and Document Size of placed images?

Is it possible to find out the placed image details like Pixel Dimensions(Width,Height) Document Size(Width,Height) in illustrator through scripting. Kindly advice me with some examples.

http://www.adobeforums.com/webx/.3bbaa316.59b84fd8
I hope the snippet therein will get you started.
But after all, when you place an image via pi=layer.placedItems.add() it should pop in with its default dimensions, so that you have pi.height and pi.width ready.
Is this what you are aiming at?

SCRIPT TO IMPORT MULTIPLE PLACED IMAGES..AND OUTPUT MULTIPLE IMAGES TO SINGLE PDF.

Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..

In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another.

How do I align a placed image in a frame using JS?

I am new both to javascript and to scripting for InDesign, so please bear with me on this question.
I am trying to align an image in a graphic frame so it aligns to the top right corner of the frame.
I can do this using the InDesign interface by following these steps:
1. Create a rectangular frame.
2. Right-clicking the frame and selecting "Fitting > Frame Fitting Options."
3. Selecting the top-right square in the "Alignment" area of the Frame Fitting Options dialogue.
For me, this automatically aligns the image to the top right corner in the selected text frame, even if there is a placed item in the frame.
I am trying to apply this to the actual image frame using the following code where "modelFrame" is the rectangle that is the parent of the placed image:
modelFrame.frameFittingOptions.fittingAlignment.anchorPoint = AnchorPoint.TOP_RIGHT_ANCHOR;
I am not getting an error, but I am also not getting the desired results (in fact, it doesn't change anythign at all). What am I doing wrong?

Hi lanejd,
I have got the same issue as you but had just found the solution. Please see below:
modelFrame.frameFittingOptions.fittingAlignment.anchorPoint = AnchorPoint.TOP_RIGHT_ANCHOR;
This will only set the properties for the Frame Fitting Options. You will need to call a method/function. Add the below line to your script and it will execute the Frame fitting Options.
modelFrame.fit(FitOptions.applyFrameFittingOptions);
Hope this help!

How to image trace multiple objects at once on Illustrator CC?

Hello,
This may sound like a stupid question, but I am having troubles trying to image trace multiple objects all in one go.
I'm currently working on Illustrator CC and I remember this process being a lot easier to do on Illustrator CS5.
I have a typical job where I create client specific barcodes on a separate program, and then bringing them into Illustrator to vectorize.
When I used to do it in CS5, all I had to do was release clipping masks, select all 50 or so barcodes, then Image Trace - and voila, al of my barcodes were vectorized at once - easy.
I now have to vectorize about 120+ barcodes and Illustrator CC is only letting me select & image trace one barcode at a time. There has to be a better way, and I'm hoping someone here can help.
(I would open up CS5 and do it from there, but my work computer was recently replaced with a newer iMac and was only provided with Illustrator CC)
Thanks!

Not sure what your barcode-specific challenges and methods may be, but my general aversion to the image trace feature compels me to suggest that you just create the barcodes in vectors in the first place. I do that using Terry Burton's free online barcode generator.

My InDesign program is printing my placed images lighter than illustrator.

I am trying to print a colour logo in Indesign with black type on my inkjet printer. The colours are appearing fine on screen and so is the black but when I print everything is washed out. I tried just printing a black box and it appears black on screen but in print it is grey. I have tried changing the preferences Appearance of Black to rich and accurate but that did not make a difference. Do I need to do anything in color management I am using Indesign CS2. How can I solve this problem?

Acrobat worked, thanks for that advice. I set my Convert to Profile under the Edit Menu to Color
Match RGB. That helped a little bit but it is not printing like the
pdf. I would like to get this problem resolved. I normally use
illustrator most of my work. But I would like to have InDesign working
properly as I need it to do other jobs.
Take Care,
Jen
Take Care,
Jen
Date: Fri, 14 Aug 2009 14:24:47 -0600
From: [email protected]
To: [email protected]
Subject: My InDesign program is printing my placed images lighter than illustrator.
Jen,
This is a problem that you have no time to fool with, correct?
When printing from InDesign and all looks hopeless, export to PDF and print from the PDF.
Why?
I don't know for sure but it seems all printers made recently accept PDF better than straight from InDesign. It could be the printer driver and it could be InDesign but you don't have time to mess with it now. Wait for some free time to sort it out, but for now output to PDF and print from Adobe Reader or Acrobat.
>

Placing Images Infront of Objects

Similar Messages

Maybe you are looking for