Plain adapter after SP19 - Qos EOIO

Hi All,
after having applied SP19 on my XI 3.0, in an integration scenario "plain adapter to Idoc" with QoS EOIO, the registred outbound queues are not more SAP_ALE_<idqueueu>, but XBQO1_<idqueue>.
Have anybody ever heard?
How solve?
Thanks in advance
matteo

Similar Messages

Queue name in QOS EOIO -Sender SOAP Adapter

hi,
While configuring sender soap adapter , if we specify EOIO as QOS , then there is a mandatory parameter Queue name to be specified.
What is this Queue name ?
and where is it created
kindly reply
Regards,
loveena

Hi D' souza
Goto tcode -> SXMB_ADM -> register queues
for specifying QOS EOIO you need to assign a queue
from there you can specify the queue for Outbound side EOIO queue
Various queue name and there meaning is as follows
XBT*-Queues for Exactly Once.and time dependent
XBQ*-Queues Exactly Once In Order.
XBTI* are inbound queues for EO with time constarint
XBTO* are outbound queues for EO with time constarint
XBQI* are inbound queues for EOIO
XBQO* are outbound queues for EOIO
for beter understanding of how to configure sender soap channel you may folow this link
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
thanks
sandeep
if helpful reward points
Thanks
sandeep
if helpful rewrad points

QoS EOIO - How to Configure in JMS adapter?

Hi there,
In order to configure the JMS sender-adapter with EOIO QoS, I need to provide 2 "extra" parameters. These are
1)Queue ID
2)Processing J2EE Cluster Server (ClusterID)
So far I was able to find out the name of the ClusterId in our system but for the Queue ID I still have some doubts.
From the XI documentation I understand that for QoS EOIO , all messages share the same queue. They also say; The "suffix" of this queue must be explicitly set in the application program by a serialization context before the client proxy is called. What exactly is serialization-context in this context?
Can someone provide me with a clear explanation which steps I need to follow in order to use the functionality of QoS EOIO? And if possible some example of the name of an EOIO queue?
Thanks,
R.

Hi Roberto,
For queue ID, you can specify any arbitrary queue ID for example, POQueue1, jayqueue or salesorder...
It can be anything you want and no additional configuration is needed. Just specify any name you like to use for queue ID and you are all set.
Thanks,
Jay

J2SE Plain Adapter

Hi,
We are using J2SE Plain Adapter ...
In one of my scenario i need to send a flat file from one system to another.
To achieve this i have created a sender file adapter in J2SE with content conversion. file is picked successfully ..i have given a sample file as follows
123;abc;xyz
456;qwe;fds
then in moni i can see this file as in XML.
now i need to convert this xml file into flat file by using J2SE receiver file adapter.
Can anybody help me how to configure receiver file adapter in J2SE?
Please see the below code... for sender file J2SE adapter..
## file adapter java class
classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
version=30
mode=FILE2XMBWITHSTRUCTURECONVERSION
Use Password Tokens
PWD.tokenHandler=PWtokens
Integration Engine address and document settings
XI.SLDConfiguration=SLDaccessor
XI.TargetURL=http://abc.com:8000/sap/xi/engine?type=entry
XI.User=xyz
XI.Password=xyz
XI.Client=100
XI.Language=en
Quality of Service (EO,EOIO,BE)
XI.QualityOfService=EO
Repository Information
##XI.SenderParty=ADAPTER
XI.SenderService=BS_SENDER_FCC
XI.Interface=MI_FCC1_Out
XI.InterfaceNamespace=http://www.sap-press.com/xi/training/00
#XI.ReceiverParty=
#XI.ReceiverService=
File processing config
file.sourceDir=f:/abc/
file.sourceFilename=xyz*
file.type=TXT
#file.encoding=UTF-8
file.pollInterval=10
file.processingMode=delete
xml.documentName=MT_FCC1
xml.documentNamespace=http://www.sap-press.com/xi/training/00
xml.recordsetName=Data
xml.recordsetStructure=item,1
xml.item.fieldNames=ID,Name,Address
xml.item.fieldSeparator=,
Thanks in Advance..
Regards,
Reehan

use this help link as a reference;
http://help.sap.com/saphelp_nw04s/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm
it is as similar to the sender side configuration

How to register a file adapter in XI Server? [XI 3.0 / J2SE Plain Adapter]

Hi,
I am trying to register an outbound file adapter (J2SE Plain Adapter Engine) in the XI server to finally map the adapter to a communiction channel.
What I tried is to activate the SLDaccessor service in the J2SE Plain Adapter Engine (as mentioned in Plain Adapter Docs -> Serive: SLDaccessor Service).
After restarting the Adapter, the protocol in Plain Adapter Engine didn´t show any errors.
Now my problem is where can I find in the "XI-Tools" (SLD, Configuration Builder, ABAP-based Server GUI) that the registration of the adapter did run properly?
What I expected was that my file adapter would appear in the Integration Builder in my communication channel under the tab "Parameters" in the drop-down box "Adapter Engine". Unfortunately, it is not listed there.
Furthermore, I do not exactly understand the benefit of registering the adapter in the SLD. What is the real advantage than establishing a connection between the adapter and the XI with the parameters XI.TargetURL etc.
Regards,
Kris

Jason, thanks for your answer.
Unfortunately, it is not running yet. The Adapter protocol states now:
11:03:00 : No entry in SLD found for Bus.System 'WeissmannBuisSys1'
The corresponding adapter configuration looks like:
XI.SenderParty=
XI.SenderService=WeissmannBuisSys1
XI.Interface=OrderMI
XI.InterfaceNamespace=http://www.foobar.de/sap/xi/test170604
Can I at least assume that there has been a connection to the business SLD?
If yes, I do have a Business System 'WeissmannBuisSys1' in SLD -> Business Landscape as well as in my Configuration Scenario under 'Business Systems'. Is this the right one to specify in the parameter XI.SenderService or will there be something else expected?
Besides that, the corresponding documentation is somehow confusing to me:
You can set the following arguments (except in mode FILE2XMBSTREAM) and use them to identify the adapter configuration during routing and mapping in the Integration Engine pipeline. You can also find an explanation about each argument there.
- XI.SenderParty=<sender party name>
- XI.SenderService=<sender service name>
- XI.SenderInterfaceNamespace=<namespace URI>
- XI.SenderInterface=<name>
- XI.ReceiverParty=<receiver party name>
- XI.ReceiverService=<receiver service name>
You must set at least XI.SenderService and XI.Interface. The receiver is generally determined by routing in the Integration Engine. This specification is not mandatory.
The XI.Interface mentioned in the last paragraph is not listed above in the parameters list. I assume XI.Interface == XI.SenderInterface.
In the german documetation there is also another XI.InterfaceNamespace mentioned in the last paragraph which I assume is XI.SenderInterfaceNamespace.
Regards,
Kris

J2SE Plain Adapter - Continuous Operation

Hi All,
I would like to ask for your assistance in configuring the J2SE Plain Adapter Engine for continuous operation.
This is the scenario:
We currently have the db_receiver (jdb receiver) adapter up and running. The connection to the DB is ok and also the communication to XI is successful. However we would like now to have it permanently running as NT service to avoid running the run_adapter.bat and open the web browser, enter user and pass, etc, every time we need to use the adapter.
Following the directions given by the Adapter.pdf document, under section u201CContinuous Operationu201D, the service SAPAdapterengine was successfully created, but now we have two doubts with regards to this:
1- The service mentioned above is not started right after the installation and every time we try to do it, the following message is displayed: The SAPAdapterengine service on Local computer started and stopped. Some services stop automatically if they have not work to do, for example, the Performance Logs and Alert service.
2- How the newly created service detects the configuration weu2019ve done for the db_receiver adapter in the very first time?
Is there any extra step to link the service and the previous configuration made for db_receiver? Could you please give me or point me to some info source that explain the way the service works?
Thanks in advance. Your help is highly appreciated.
Kind regards

Hi Diego,
Have you had any luck in getting this to work. I am having the same issue, would really appriciate the help.
Kind regards

Configure SSL in J2SE Plain adapter

I tryed to configure SSL in J2SE Plain adapter. (7.0)
I've generated a certificate file "certif_file.cer" and
while I put in GUIBrowserEngine Property File the following
line:
HTTP.SSLcertificate=F:\tech_adapter_70\certif_file.cer
I've got the following error message:
16:19:10 : Error(s) in GUIBrowserEngine configuration
parameters found:
ERROR: Certificate file 'F: ech_adapter_70certif_file.cer' not
found, must quit!
It seems that something wrong with my definition of full path
to this file. But I do not find from SAP Library any solution
about this problem.
Could you help me?

Hi Boris,
Please try to give the full path using backslash '/' :
e.g. F:/tech_adapter_70/certif_file.cer
I hope it will work.
 The J2SE Adapter Engine uses SSL only for communication line encryption, not for client and server authentications. Since this is a drawback with respect to security, you should use the J2EE Adapter Engine in insecure environments.
 All configuration data for the Plain J2SE Adapter Engine is maintained in flat property files.The file for the engine administration data itself is located in the following directory:
<installation directory>/tech_adapter/BaseConfiguration
The file for the adapter configuration data is located in the following directory:
<installation directory>/tech_adapter/Configuration
 The adapters of the Plain J2SE Adapter Engine are configured locally and not in the Integration Directory. Exchanged messages are also stored directly in the file system.
Therefore, ensure that only the operating system user, who has started and therefore owns the adapter engine process, can read the property files and has access to the directories used for message exchange.
*Pls: Reward points if helpful*
Regards,
Jyoti
Edited by: Jyoti Acharya on Dec 19, 2007 5:05 PM

Rename file in file adapter after processing

Hi All,
My requirement is, i need to rename the file in receiver file adapter after the file is written to the folder. and this file should have a counter attached to its name. For eg. If i had a file created with name Material, i want to change it to Order001, Order002, Order003.... so on and counter should reset after 999. how can i achecive it?
thanks a lot in advance.
Regards,
Rashmi
Edited by: Rashmi H S on Jul 15, 2009 12:15 PM

Hi Rshmi,
use this UDF i hope it will work fine,
DynamicConfiguration conf = (DynamicConfiguration) container
     .getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String a=conf.get(key);
int inc = 1;
Integer seqNo = (Integer) container.getParameter("seqNo");
if(seqNo == null || seqNo ==999){
                            seqNo = new Integer(inc);
else{
                           int num = seqNo.intValue() + inc;
                           seqNo = new Integer(num);
container.setParameter("seqNo", seqNo);
return var1+seqNo.toString();
Regards,
Raj

Hyper-v Client in Win10 Enterprise Technical Preview does not boot to PXE via Leagacy Network Adapter after OS is installed using gen 1 BIOS

Using Hyper-v within Windows 10 Enterprise Technical Preview to boot a Win 7 Legacy BIOS (Generation 1) Operating system client does not boot to PXE legacy network adapter after operating system has been installed within the Virtual Client.
Hyper-v Client will boot to PXE Legacy Network Adapter only when no other boot device is available and no OS is installed.
Hyper-V settings seem to ignore BIOS - Startup order within Hyper-V Client Settings and will always boot to VHD before Legacy Network Adapter even if Legacy Network adapter is first in the startup list.
IF VHD is deleted and a new VHD added to the Client then will boot to PXE using Legacy Network Adapter. Again once OS is installed then will not boot to PXE Legacy Network Adapater.
Gen 2 BIOS/UEFI works as expected and boots to PXE network everytime.

Hi shaunmoncrieff,
Thank you for the information.
Currently I am not available to take a test using Windows 10 on physical machine.
You may try to submit this information through Windows Feedback Tool, once I have tested, I will update the results here.
Best regards
Michael Shao
TechNet Community Support

Do i need a new charge adapter after updateing my i phone 3

do i need a new charge adapter after updating my i phone 3.

What do you mean by "updating"? If you mean "updating the software", the answer is no. If you mean buying a newer iPhone, the answer dpends upon which newer model you bought.

Execute an adapter after a scheduled task

Hi guys,
How do I execute an adapter after scheduled task??
I have a gtc recon trusted, but doesn't has the user login, I need generate this login. I have created an adapter that genate this login, but I don't know what time to run this adapter and I don't know where I need insert the call to this adapter.
Thanks

If it is 9i write an pre-insert event handler instead of adapter. and attach on user data object
for above you have to write a java class which has to extends tcBaseEvent class and then override the implementation method
here you can generate your user login as per your logic and then set the usr_login.
finally build the jar and put this under <IDM_HOME>/server/EventHandler folder

File adapter with QoS=EOIO Is there any filesize limitation?

Dear Experts,
I'm using a File/FTP Sender adapter with Quality of Service = EOIO (Exactly Once In Order) to keep the polled order of the files.
In the processing parameters I defined a queue name and everything is working well for small (~1 MByte) files.
But if I want to transfer bigger (~25 MByte) files, the whole Java stack collapses and the system has to be restarted.
Is there any size limitation for this own defined queues?
Have you any experience with this kind of processing?
Any comments / experiences are welcome!
Best regards,
Andras

Hello,
there are several files to poll, we have to keep the alphabetical order of them.
It seems, that we have this issue only with EOIO. (EO works good)
After the system has restarted, the first file from the queue was processed, but with a n error message "Could not delete file 'filename.dat' after processing: java.lang.NullPointerException"
(the delete option is on after the transfer)
Is there any possibility to check the mentioned "QuicSized" settings?
I just wanted to know, if there is an "unofficial" size limit of these queues.
Thank you!

Receiver file adapter behave like a EOIO

I have an interface wherein R/3 sends IDocs to XI and the messages have QOS as EO. XI triggers a proxy interface which retrieves a certain data back from R/3. Once the mapping is done in XI, the receiver, a file adapter creates a bunch of files for each message.
Here's the data scale.
1 IDoc triggers 1000+ proxy message interfaces which triggers over 2000+ files.
All messages in the receiver queue (XI_SERIALIZE00xx) go into EOIO status. What is driving this EOIO message type (IDocs are coming in as EO messages).
The problem, if one message gets into system error, all go into holding status. They are all independent of each other. How can I fix this??
Thanks,
Pam

After digging into this further...here's how it is working and I'm figuring out how the queue id got assgined to proxy inbound (sender).
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnceInOrder</SAP:QualityOfService>
<SAP:QueueId>XI_SERIALIZE0012</SAP:QueueId>
</SAP:ReliableMessaging>
Here's the flow.
IDoc message (r/3) to ZIDoc_in (XI) - the messages are EO
ZIDoc_in (R/3 proxy) to ZIDoc_out (XI) - the messages here are set as EOIO with the queueid from above.
ZIDoc_out (XI) to ZFile_in (File receiver) - thousands of messages go in as EOIO
as per this blog
- /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
I did not find the queue id set in the abap proxy code. So where is this "XI_SERIALIZExxxx" being set and how is it becoming EOIO?
Not sure if the parameter in the interface determination is doing this since the messages from the proxy shows up as EOIO.
Thanks.

Problem after SP19 Installation

Hy guys,
ich have the following problem after the SP19 INSTALLATION:
I cannot see the adapter in Adapter Monitor and no communication channel works.
I already read thread about the problem and already imported SAP_BASIS Software components but doesn't work.
Could someone give a tip.
Thank's a lot and a nice day.
Mati

type the folllwoing url
http://<yourservrname>:<yourserverport>/mdt/channelmonitorservlet. this is checks whether the adapter is running or not.
Regards
Sreeram.G.Reddy

QoS - EOIO in RFC and http/SOAP adapters

Hi all,
I need to have the QoS as EOIO in my interface where I am using RFC Sender adapter and HTTP/SOAP receiver adapter and using BPM Integration process.
I have seen in the adapter attributes that these 2 adapters support the EOIO. I don't know how to specify this service in the adapters.
Is there any special way of specifying this?
Any help in this regard is highly appreciated.
My interface is async and we are at SP 14.
Thanks
Kalyan

Hi Kalyana,
Check these..
2 scenarios with 1 Rfc-queue does it work ??
RFC synch/asynch
Queues for RFC-Destination
cheers,
Prashanth
P.S Please mark helpful answers

Plain adapter after SP19 - Qos EOIO

Similar Messages

Maybe you are looking for