Receiver file adapter behave like a EOIO

I have an interface wherein R/3 sends IDocs to XI and the messages have QOS as EO. XI triggers a proxy interface which retrieves a certain data back from R/3. Once the mapping is done in XI, the receiver, a file adapter creates a bunch of files for each message.
Here's the data scale.
1 IDoc triggers 1000+ proxy message interfaces which triggers over 2000+ files.
All messages in the receiver queue (XI_SERIALIZE00xx) go into EOIO status. What is driving this EOIO message type (IDocs are coming in as EO messages).
The problem, if one message gets into system error, all go into holding status. They are all independent of each other. How can I fix this??
Thanks,
Pam

After digging into this further...here's how it is working and I'm figuring out how the queue id got assgined to proxy inbound (sender).
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnceInOrder</SAP:QualityOfService>
<SAP:QueueId>XI_SERIALIZE0012</SAP:QueueId>
</SAP:ReliableMessaging>
Here's the flow.
IDoc message (r/3) to ZIDoc_in (XI) - the messages are EO
ZIDoc_in (R/3 proxy) to ZIDoc_out (XI) - the messages here are set as EOIO with the queueid from above.
ZIDoc_out (XI) to ZFile_in (File receiver) - thousands of messages go in as EOIO
as per this blog
- /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
I did not find the queue id set in the abap proxy code. So where is this "XI_SERIALIZExxxx" being set and how is it becoming EOIO?
Not sure if the parameter in the interface determination is doing this since the messages from the proxy shows up as EOIO.
Thanks.

Similar Messages

Receiver file adapter settings

Hi,
I have a scenario in which I need to generate a file in tab delimited format. But in the receiver file adapter configuration we have only text/binary file creation mode. By setting the File Type in TEXT mode will I be able to do a tab de-limited file?? Or is there any other configuration settings need to be done?
-Ken

Hi Amanda,
Thank you so much for the great info. I think I can find some stuff but still it would be helpful if you could forward the doc to [email protected] Also, yeah it looks like the receiving file format would be complex with header and footer. In the content conversion can we specify header and footer?? or is there any other way to define...FYI my source file also contains header and footer..I am just a little confused on how to set up the message types for mapping...
Many thanks..
-ken

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

Need to get the Mail attachment name as it is to the receiver file adapter

I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJ

Oops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1     swap.keyName          payload-name
1     swap.keyValue          MailAttachment-1
RECEIVER FILE MODULES
1     localejbs/AF_Modules/DynamicConfigurationBean     Local Enterprise Bean     1
2     localejbs/CallSapAdapter                    Local Enterprise Bean     2
1     key.0          write http://sap.com/xi/XI/System/File FileName
1     value.0          message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName     message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
     private static final long serialVersionUID = 7612238514043673502L;
     private SessionContext myContext;
     private MessagePropertyKey myFileName;
     public void ejbRemove() {
     public void ejbActivate() {
     public void ejbPassivate() {
     public void setSessionContext(SessionContext context) {
          myContext = context;
@throws CreateException
     public void ejbCreate() throws CreateException {
     public void getMessageProperty(MessagePropertyKey FileName) {
          myFileName = FileName;
@param moduleContext
           Contains data of the module processor that might be important
           for the module implementation such as current channel ID
@param inputModuleData
           Contains the input XI message as principal data plus eventual
           set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
        response message if the module is the last in the chain.
@exception ModuleException
               Describes the cause of the exception and indicates whether
               an retry is sensible or not.
     @SuppressWarnings("deprecation")
     public ModuleData process(ModuleContext moduleContext,
               ModuleData inputModuleData) throws ModuleException {
          try {
               Message msg = (Message) inputModuleData.getPrincipalData();
               TextPayload payload = msg.getDocument();
               String contentType = payload.getContentType();
               // Content Type could be something like
               // text/plain;charset="UTF-8";name="file.txt"
               contentType = contentType.replaceAll("\"", "");
               int i = contentType.lastIndexOf("=") + 1;
               String fileName = contentType.substring(i);
               msg.setMessageProperty(myFileName, fileName);
               inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {
          return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14     Information     Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14     Information     Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14     Information     Swap: successfully swapped
2009-02-04 11:41:14     Information     Mail: message leaving the adapter (call)
2009-02-04 11:41:14     Information     The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14     Information     Backward validation is enabled
2009-02-04 11:41:14     Error     Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14     Error     Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Receiver File adapter content conversion using StrictXml2PlainBean

Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name                              parameter value
recordTypes                                  Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator                |\n
FileTrailer.fieldSeparator               |
Header.endSeparator                   |\n
Header.fieldSeparator                  |
TransactionDetail.endSeparator   |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
   Header 0...1
   Transaction 0....Unbounded
      TransactionHeader 1..1
       TransactionDetail     0...unbounded
        TransactionTrailer 1...1
   FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AM

Hi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
    <TransactionHeader> 1..1
     </TransactionHeader>
     <TransactionDetail> 0...Unbounded
     </TransactionDetail>
      <TransactionTrailer>1...1
       </TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM

RECEIVER FILE ADAPTER FCC ERROR

Hi team
My scenario is a text file has to be picked up by PI, has to processe it and the receiver is Proxy and it has to get updated and sent back to FTP location.
i am using Sender File Adapter with FCC and Also receiver File Adapter with FCC.
Both the sender and receiver structures are same; i am using the same FCC parameters for both the sides.
in Receiver File Adapter i am getting the following errors
1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
please help me out
thank you
Edited by: vemugantivn on Aug 16, 2010 12:19 PM

Hi,
> 1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
> 2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
It is saying that you are not using the fieldSeparator parqameter.
have you provided the field separator parameter? if not then give like below
order_row.fieldSeparator : , (give what ever the separater you are using)
or
order_row.fieldSeparator : 10,5,... (if you are using fixed length)
Regards
Ramesh

Receiver file adapter error for special char.

I am using MTB in my receiver file adapter. I am getting a special character from source system at end of the string. How to resolve this type of error u2013 please advice.
This error is not coming for every message.
Error message:
Column value xxxx Â too long - must stop, probably configuration error in file adapter
Thanks
Vick

Hi,
Itu2019s basically IDOC to file scenario.
This error is coming for name field.
What I am thinking at this stage to do changes in MTB by define parameters like (NameA.enclosureConversion)

Dynamic file name (Date) in Receiver File Adapter

Hi,
can any one tell me how to create outbound file name with receiver file adapter in format like Name_22-08-2006.dat. I need from a current Date in the name of the message (without any other information). In message payload I dont have that date. Is it possible to use variable from user defined function in message mapping for that name?
Regards,
Naycho

Naycho,
that's exactly what I've managed to perform using DynamicConfiguration. Check these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/frameset.htm
Particularly, I've created a Java API for using setDirectory and setFileName methods through mappings. I use XSLT with java enhancement because it's a million times easier to parse and get node values with XSL than pure java.
I'm writing a blog on the subject, if you don't resolve the problem until it's out, let me know.
Regards,
Henrique.

Dynamic Filename on Receiver File Adapter

Hi,
I am running XI 3.0 SP 14.
The scenario is
SAP R/3 (IDOC) > XI (Receiver File Adapter)> FTP Server
There is no mapping on the XI side, we just drop the IDOC XML on to the ftp server.
I would like to configure a dynamic file name on the Receiver File Adapter where if the 'MSATZ' Field
within the E1EPD04 segment of the IDOC is populated then I would like to send a separate
Filename than the one specified on the 'File Name Scheme'.
Has anybody done this or any suggestion how I should go about this please.
Thank you.
Warm Regards,
Ranjan

Hi Guys,
When I tried to create the User defined function as below, I got the Null value for the "StreamTransformationConstants.DYNAMIC_CONFIGURATION" object.
My code looks like this,(this is part of the debuging code)
Start
public String Create(String a,String b,Container container){
if (container.getTransformationParameters() == null)
return "conf.null";
if (container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION) == null)
return "Dynamic.null";
return b;
--End
On the output I get the value "Dynamic.null". I do not know why the object value is Null.
Any suggestion pls.
Thank you.
Warm Regards,
Ranjan

Receiver File Adapter Content Conversion Problem.

Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.

Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
   //write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
     if (!("".equals(Input)) )
          if (Input.length() > Size )
               Return_Value = Input.substring(0,Size);
          else
               Return_Value = Input.substring(0, Input.length());
     else
          for(int i = 0; i< Size ; i++)
          Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working.

Receiver file adapter with attachments.

Hi
I would like to pass a file receiver an attachment from a proxy. I have seen bits and pieces with attachments. I have read that its similar to the mail adapter.
In the module
localejbs/AF_Modules/PayloadSwapBean
module configuration:
Parameter Name: swap.keyName
Parameter Value: payload-name
Has anyone succeeded and would you explain the details?
Thanks in advance
Ian

Hi,
As far as I know, receiver file adapters do not supprt attachments.
You can use the payloadSwapBean to swap the attachment and the actual proxy payload and then send it to the file adapter.
Don't think it will be possible to send both the attachment and the payload to the receiver file adapter though.
Regards
Bhavesh

Receiver File Adapter - Dynamic FTP Server Address

Hi, I would like to pass the FTP Server address to the Receiver File Adapter as an parameter. Is this possible and if so what Name Space / Parametr Names add to the Product to define these values.
Thanks
Andre

Hi Andre,
If you have your server as a part of your payload, thendynamic file server generation concept can be done is as follows.
In your server name field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack

Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
     . // Create XML for each row and Marshal the object into to the String Buffer
     String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
     conf.put(KEY_FILENAME, strFileName);
     arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
     arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh Shah

Hi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
      Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.

How to generate file name dynamically in receiver FIle adapter? Please help

Dear Experts,
   I have a scenario where I need to generate output file with the name dynamically pulled from the XI payload.
   In receiver File communication channel I don't see any option where we can specify the XML path for the file name.
   For example:
   If my inbound XML structure (inbound interface) is like below:
   <filename>file123.txt</filename>
   <RootNode>
         <Element1>Product123</Element1>
   <RootNode>
From this I need to pick the filename value and generate the output file with the same value.
How can I achieve this? Please help!
Thanks & Regards
Gopal
Edited by: gopalkrishna baliga on May 3, 2011 1:10 PM

Gopal,
You can use DynamicConfiguration class for this.
You need to write UDF for this and with input of filename you want to set and map this UDF to the top level node.
Refer the below famous blog from Micheal:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
You can also use Variable substitution to get value from payload, search SDN on this.
--Divyesh Vasani

Receiver file adapter behave like a EOIO

Similar Messages

Maybe you are looking for