Planned order number - MFBF - Backflush

Hi, Expert.
In t-code MFBF in th field "planned order number" where and how I can put in this field as mandatory.
I appreciate any help on this subject and also a step by step to implement, if possible
Best Regards
Armando

Dear Armando,
Even i faced this problem in one of my project
User used to Backflush material level instead of plan order level
But client requirement is user should only backflush via Plan order level
so we made Via SHD0, plan order field mandatory & Material field as Display mode
Plz check the below link for SHD0 & provide it to your Abaper
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Regards
Madhu

Similar Messages

Planned Order Number Ranges

Hi Gurus,
I am having two plants defined in one company code.
Is Planned order number range plant specific?
My planned order number range in plant-1 is 1000-2000 and it is same in the Plant-2. If I create the planned orders in both plants.
What is starting number for planned orders in each plant?
Can I create like this?
Thanks in advance.
Regards,
Jejesh
Edited by: jejesh yal on Sep 30, 2008 9:25 PM

Hello,
If you are creating Planned order using the MRP, you can set the plant specific Number range for planned Order at OPPQ
Please check with planned order Number range tab at OPPQ
Regards
Pradeep

Planned order number range in apo

Where planned order number range can be maintain in apo.
I am converting agreed plan into planned order but planned order number has generated.
Please somebody tell me.
Regards,
Sunill

Planned order number ranges can be maintain in
sproaposupply chain planningppdsglobal settings--maintain number ranges for orders.
and then you assign the number ranges in
sproaposupply chain planningppdsglobal settings--maintain global parameters and defaults (in planning tab )

Planned order number list

Hi,
Can any one tell me in which table system storing planned order number and which numbers getting converted to purchase requisition.
Your response is apprecited,
Thanks
Dipak

Hi,
Check the table <b>PLAF</b>.
Regards

Planned order number and Plnkn

Dear All,
I need the table link between planned order number and Number of the task list node(PLNKN).
Thank you in advance
Regards
Sailendra.M
Edited by: nivedita yadav on Jun 25, 2010 2:35 PM

Dear Nivedita,
Check with this functional Module in SE37
BAPI_PLANNEDORDER_GET_DETAIL
In my understanding I dont think nwe can get this data from table.
Regards
S Mangalraj

Get planned order number(PLNUM) or requirement number(RSNUM) of a BOM item

Hi everyone!
I have a material...viewing it at MD16..i can now see the stock/requirements list displayed in a tree. Now i have below hierarchy:
material 1       ----> has                planned order number
       material 2 ------> has           requirement number
             material 3 ------> has       planned order/requirement number
             material 4 ------> has       planned order/requirement number
material 5 ------> has       planned order
material 6 ------> has       planned order
using the planned order number of material 1 in the BOM, i was able to get the requirement number of material 2, what i want to know is how to get the requirement number of the next level under material 2...that is, the planned order/requirement number of material 3, material 4 ....
thanks!
Edited by: abapGenin on Jun 1, 2009 5:11 AM

I answered this myself.
I used MD_SALES_ORDER_STATUS_REPORT.

Planned order number & Manual pegging

Hi all!
I've executed PPDS heuristic SAP_PP_02. It has generated several planned orders. But they do not have any numbers (in /sapapo/rrp3 i can not see them in column "Number of Receipt/Requirements Element". Forecast requirement number is there)
Also If I do manuall pegging (in /sapapo/rrp3, tab Pegging Overview i put FixedPegging quantity, Pegging type M) I can not see it in detailed planning board.
If I peg througt SAP_PP_19 then pegging type is A and I can see this pegging (between dependend requirement and planned order that covers it). Why that can be? (that manuall pegging is not works).

Hi Kleva,
related to the planned order number that is missing check in the PP/DS customizing --> Global Setting --> Maintain Global Parameters and Defaults, if is flagged "Use Number Range". This will allow you to use the range of planned orders defined.
Regards

Error during Production Order Confirmation mfbf ( backflush)

in my company in sap when i using mfbf for production Order confirmation of tractor then during backflush using mfbf tcode order confirm but in my store dept no metiral cunsume so please regards this problem
with warm regards
pritpal singh

Dear Pritpal,
sorry dear,today i cant check my inbox immediately. Anyway my mail id is [email protected]
have checked as per my previous post.
regards
pradeep

Planned order status details in rem

Hai gurus,
In discrete manufacturing after confirming the respective production order we can go to T.C co02 and give
the respective production order number to view the status and from that we can know the operation details
and status in the routing.
Like wise after doing MFBF for a fert using the planned order say (x), suppose if i want to know the status
and details of the routings in the confirmed pld order (x) , how can i get the information.
regards,
sekar chand.

Dear sekar chand,
In standard SAP in REM scenario,there's no concept like planned order status,but if you have carried
out confirmations using planned order in MFBF,then you can get that list alone in T Code MF12.
Also in MF12 you can get the list of documents where you have carried out a normal backflush, or
activity backflush etc.
Still order status for planned orders can be brought into SAP ,but lots of developments has to be made.
Regards
Mangalraj.S

REM Back flush using firmed planned orders

Dear Gurus,
We are using REM manufacturing process in SAP , we are doing backflush for stage wise confirmation and final confirmation.while doing this we are not referring any planned orders as reference.
if we update new part numbers in BOM the system asking for the availbilty of that particular new part numbers but physically we are having old materials .
we want to consume that old materials how it possible in the MFBF t.code.
if any one please help me , if I firmed a planned order with quatity or date then sytem will ask the old materials instead of new one.
pls explain what is planned orders and their impact on MRP ?
how we can firmed that planned, if i firmed what is the impact duirng backflushing?.
Thanks & Regards
Suresh babu.s
WIN - IS.
Suresh

Hi
please compare the process when you create the production order manually in Co01 instead of creating the production order by converting the planned order.
Here you are carrying out back flush with out refering the planned order.
It is like creating the production order manually.
In such case system will always look the BOM as of now.
It will not refer any of the planned order & the components there in.
If you want to consume the old parts instead of new parts , you can delete the new part numbers & add the old ones in MFBF. this will be allowed by system.
In this case you are back flushing with out reference to planned orders.System will not ask for old components at all whether planned order is firmed or not.
Once if planned order is firmed a star (*) mark will appear in MD04 near the planned order number.
Once if the planned order is firmed, it will not be changed in subsequent MRP Run.
Hope it is clear.
Pl. award if it is clear else pl. update.
Regards
YMREDDY

REVERSING PLANNED ORDER - REM

Hai all,
In REM, I want to reverse the some backflushed components (ie., Reversing the GR) at that time system automatically create planned order based on the settings maintained in REM Profile. In case i didn't maintain anything in REM profile in that case what will happen?
ganeshraja

Dear Mr.Ganesh Raja,
As explained by Mr.Ram,For the particular REM profile which is assigned to the
material forwhich MFBF is carried out,while doing MF41,Reversing ,if u want the
system to create a planned order automatically of the same quantity of reversed
one,then in SPRO - Production - Repetetive Manufacturing-Control data - Define
REM profile,In control data2 Creating planned orders When reversing - include a
tick mark in the check box- create planned orderswhen reversing.
The system automatically thorws you a planned order with a new planned order
number,of same quantity.
If useful reward points.
Regards
Mangal

To build query related to SNP: Planned Order

Hi,
System: SCM 5.0
Scenario: SO received at plant and planning creates PR against SO at plant and accordingly SNP:Planned Order at Vendor location. If SO is cancelled/deleted (manually), sometime only the PR gets cancelled/deleted (automatically during planning run) but corresponding SNP:Planned Orders still remains at vendor location and so the dependent requirements. PR and Planned Orders are pegged to SO so one-to-one relation is maintained.
I could not find any reason why system is not deleting Planned Order at vendor location despite SO and PR is deleted at plant location. So I am planning to build query where SNP:Planned Orders are not pegged to any PR or SO.
Can anyone help with list of SNP:Planned Order tables so that I can build query around it to identify ghost Planned Orders.
Hope I was clear with my query but let me know if any further information is require.
Thanks and regards,
Devang

HI Marius,
Sorry for delay reply.
I was working on on some other more critical issues to business.
Finally we decided to built report to identify obsolete Planned Orders for which PR is not available in ordering plant. I have listed below logic for that report:
Get Location ID from table /SAPAPO/LOC based on Location entered in selection screen
Get PEGIDs from FM /SAPAPO/DM_MATLOC_GET_PEGIDS based on IV_SIMID as 000 and location id from step 1
In FM /SAPAPO/OM_PEG_CAT_GET_ORDERS, use SIMVERSION as 000 and in Import Para IS_GEN_PARAMS insert all PEGIDs from step 2.
From Export Para ET_PEG_INPNODE take From_OrderID and store in internal table.
Execute T.Code /SAPAPO/RRP4 with following selection (Use Selection Variant: OBSOLETE PR and add Location as entered in Selection Screen)
Planning Version: 000
From: Current date – 60 days
To: Current date +180 days
Location: 0000201328
Product: *
Order Type: 1F
6. Compare output of step 4 and step 5 and display result.
From FM /SAPAPO/DM_MATLOC_GET_PEGIDS the output (step 4) will be Order ID (22 characters) while step 5 (T.Code /SAPAPO/RRP4) will give Planned Order number (8 character). I am not sure how to compare Internal Order ID (22 characters) for corresponding Planned Order Nos. (8 characters).
I have not marked your post as correct answer as still need to find answer of above query.
Thank you in advance for your guidance.
Regards,
Devang Shah

How to find out manual deletion of planned orders in APO.

Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
I want to find somebody has deleted this planned order manually in apo. How to find out the same?
Regards,
Santosh

Hi Santosh,
If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
I guess CTP also works the same way. If you're unsure about this, test it out.
Hope it helps.
Regards,
Mohan

How to bring material description in case of planned order in CM25 trnx?

Hi All,
On CM25 for Process Orders, the material description is what is displayed on the bars of work. For Planned orders it displays the planned order number and material desciption filed remains empty. Is this SAP standard behaviour when it comes to planned order in CM25? How do I bring the description as well to Planned Order number#s?
Any pointers would be a great help!!
Thanks,
Nitin

Hi,
Thanks for your reply. My requirement is to display "material description text" in the "Mat description field". This field is already exits in planning table. However i cannot see material description in case of planned order and just see planned order number, material no etx ;but in case of process order, i can see material description text in the same field...
Thanks,
Nitin

Query on open planned orders details with process order GR details

Dear Experts,
I need to create a query in SQ01 where the requirement is as given below,
Query output should display the open planned orders (Planned orders which is not converted to process order details) details for a material like Planned order number, Planned order quantity, Start date, Finish date and also the details of the list of process orders created for the same material with its details like PO qty, GR qty, Basic start date, Finish date, Actual finish date, BOM Component material codes, component quantity.
But i tried creating this query by joing the tables PLAF+ AFPO+AUFK+ AFKO+RESB . My input parameter will be the Material Number for which Planned order and Process orders are being created.
But i am unable to generate the output when i create a query by joining these tables
Is it possible to obtain the output for open planned order details and process order details in a single query ?
I am failing in my repeated attempts
Please provide your suggestions for developing this query
Regards,
J.Balakrishnan

Dear Bala,
as alternative , for use a query report and not a custom abap report, you can try to read data from MRP tables MDKP and MDTB . In these one tables you can find both elements (planned order and production orders) for to start to research all details that you need.
You can also use MDTB-DELKZ to filter only planned order (PA) and Production order (FE).
With the number order you can read the RESB table in order to define components details.
With this table would you the advantage to have always the opened orders.
If the following table are empty you should make a little customizing modification so that once MRP run will write them.
Give me feedback if i have been useful for you.
Daniele

Planned order number - MFBF - Backflush

Similar Messages

Maybe you are looking for