Planning attributes in 11.1.2.2 and start/end dates in a cell

Hi. In Planning 11.1.2.2., can I make use of attribute dimensions as I would in a BSO Essbase cube?
Also can I enter a start date and an end date entry in two different account members (e.g., start_date and end_date)?
Thanks

Hi,
Yes, I believe you can use it.
And you can change the Account member Data type as Date. Then use these Accounts in the Planning Web Form. Form will give you facility to select the Date...
VB..

Similar Messages

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

Start/End Date parameters that check day of week and using to set default values.

Hi,
I've got a report that presents data between a start and an end date.
I want it to check if it's a monday and present data from the previous week, otherwise present data from this week.
For the "Default" value of parameter @startdate, I've got the following expression:
=iif(WeekdayName(DatePart("w", Today)) = "Monday",DateAdd("d",-8,Today()),DATEADD("d", 1 - DATEPART(DateInterval.WeekDay, Today(),FirstDayOfWeek.Sunday), Today()))
for @enddate I've got default value:
=iif(WeekdayName(DatePart("w", Today)) = "Monday",DateAdd("d",-1,Today()),DATEADD("d", 7 - DATEPART(DateInterval.WeekDay, Today(),FirstDayOfWeek.Sunday), Today()))
but it doesn't appear to be working, I've checked
WeekdayName(DatePart("w", Today))
as an expression in a text box and it evaluates to Monday but my IIF statement above always uses the DATEADD line therefore not returning "Monday" as the value (even though it is).
Is it a problem that the parameters are of Data/Time data type and I'm trying to evaluate as type text?
Any help would be appreciated.
Thanks :)

StartDate
=IIf(DateDiff(DateInterval.Day,CDate("01/01/1900"),Today) Mod 7 =0,DateAdd(DateInterval.WeekOfYear,DateDiff(DateInterval.WeekOfYear,CDate("01/01/1900"),Today)-1,CDate("01/01/1900")),DateAdd(DateInterval.WeekOfYear,DateDiff(DateInterval.WeekOfYear,CDate("01/01/1900"),Today),CDate("01/01/1900")))
EndDate
=IIf(DateDiff(DateInterval.Day,CDate("01/01/1900"),Today) Mod 7 =0,DateAdd(DateInterval.Day,-1,DateAdd(DateInterval.WeekOfYear,DateDiff(DateInterval.WeekOfYear,CDate("01/01/1900"),Today),CDate("01/01/1900"))),DateAdd(DateInterval.Day,-1,DateAdd(DateInterval.WeekOfYear,DateDiff(DateInterval.WeekOfYear,CDate("01/01/1900"),Today)+1,CDate("01/01/1900"))))
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
Hi,
This one works but it results to be between monday and saturday, how to make it between sunday and saturday?

Validity start and Validity End date in PO

HI gurus
can you plz tell me how to activate validity start and Validity End date in PO
Neha

Hi,
It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
Thanks

Unable to found Bucket start date and bucket end date in OFSAA 6

Hi,
How to find the Bucket start date and bucket end date in OFSAA 6.
I found following tables to mapped to Dim_Result_Bucket but unable to found columns pointing to Bucket Start Date and Bucket End Date.
Tables:
fsi_income_simulation_buckets
fsi_process_run_history
fsi_time_bucket_master
fsi_lr_irr_buckets_aux
fsi_m_alm_process
Kindly let me know the solution.

Hi;
Please check below link which could be helpful for your issue:
https://blogs.oracle.com/ebs/entry/service_contracts_warranty_created_by
Regard
Helios

Fixed start date and variable end date

I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.

WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John

Delivery Block at PGI level based on GI date and Month end date

Business need a check on delivery processing based on the Planned GI date, Month end date and transit period. This transit period is a custom field and dependent on customer. Also it is not maintained anywhere in system. Business store it in some excel format.
The logic needed is: For any given month, the delivery order MUST be goods issued in the same month, i.e. once the order is delivered, the Post goods issue should ONLY be allowed if and only if , the PLANNED GI date ( as maintained in delivery ) + transit time ( at customer level ), falls within the month end date. If not, a block should be applied at PGI and only authorized personnel should be able to release that block.
Also, there will be no check at invoicing VF01 level. Once the PGI blocked is removed, there will be no check on invoicing. The month end date may vary month to month and need to in combination of Sales Org / Plant as mentioned
In addition, the business need an exception report where the information of releasing the block should appear for release date, user id of the responsible person, time sales order no etc. and it should be downloadable.
We can have a custom table to maintain the month end day in given combination.
But I need your expert inputs as-
1-     Can we add this transit period in at customer master data as it is dependent on customer and there are huge no of customers for the sales unit? If not, then how to maintain it; may be a z table?
2-     Based on this logic, what should the code/logic to be written for block at PGI.
3-     How to control the authority check for removing the block.
4-     The source fields for exception report.
Pls revert accordingly.
Many thanks in advance.

Hello,
Please refere the answers to your questions:
1- Can we add this transit period in at customer master data as it is dependent on customer and there are huge no of customers for the sales unit? If not, then how to maintain it; may be a z table?
You can either use some un-used Feild in Customer Master or maintain a Z-Table. I believe maintaining a Z-Table would be easy as you have huge number of Customers. You can also write a dmall program to Pick the Customer-wise transit dates from a excel file & store in Z-Table.
2- Based on this logic, what should the code/logic to be written for block at PGI.
You have explained the requirement well in your thread, you need to explain the same to your ABAPer & Basis person & they would do the needful.
3- How to control the authority check for removing the block.
Basis person would create & assign a Z-Authorization object which the ABAPer would use in his program.
4- The source fields for exception report.
Once you do the above development, your ABAPer will easily pick the required feild in Report as he has already used all the feilds somewhere in his development.
Hope this helps,
Thanks,
Jignesh Mehta

Billing plan value with reference to start & End date

Hi Experts,
Request your earliest support for the achieving the below requirement.
Scenario:We have Billing plan set up for the all contracts - valid for one year.Monthly rental amount for each contract item is maintained as base price for the contract. When the billing plans starts in the middle of the month then, the billing value need to be calculated only for the relevant no of days in 'settlement' and 'To' date of billing plan. How to achieve this?
Net value of the contract item
Net value of the item   102.00 GBP
Tax for the item         15.30
Net value of billing plan for the contract item                                                                                .
Item Net value 408.00                GBP
Billing plan and contract validity details for contract item
Billing Plan Type - PM- Monthly in Advance                                    51- Monthly on First of
Contract Start date       07/15/2009 (02)-Contract Start Date        Billing plan Dates from 07/16/2009 02
Contract plan End date 10/14/2009 (09)-Contract End Date          Billing plan Dates until 10/14/2009 09
Horizon -                                                                                Cal-Id - 01
Dates
Settlement       To                      Billing date         Bill.value    Crcy Block BillSt Man. Cor PayT DCat Billing Ty Price cal
   07/16/2009      07/31/2009        08/01/2009         102.00       GBP   FA     A                                   01      ZC           01 -
> This needs to calculated upon net value for 16 days only
   08/01/2009      08/31/2009    09/01/2009              102.00       GBP   FA      A                                 01      ZC            01--->           between 07/16/2009 to 07/31/2009=102/31*16 = 52.65
   09/01/2009      09/30/2009   10/01/2009               102.00       GBP   FA      A                               01      ZC            01
   10/01/2009      10/14/2009    11/01/2009              102.00       GBP   FA      A                               01      ZC            01
Please suggest if this can be achieved through Billing plan configuration or any user exit that can be used to resolve the issue.
Thanks,
Priyabrata

as far as I know there is NO such standard report.
you would try to build sap query based on VBAK/VBAP using VBFA checking LIKP/LIPS and VBRK/VBRP...
but you may request abaper for more professional report with MKPF/MSEG and BKPF/BSEG

So, my upgrade date and contract end dates are the same?

What exactly does this mean? This was my first contract phone and it ends on 9/11/14. My upgrade date is also 9/11/14. Does this mean I HAVE to go pick out new phones and sign a new contract on that exact date? It seems they'd give you a range of dates so you could do it a little early, before your contract really ends. What happens if I don't make it there on 9/11? My service will be turned off?

lreed89
The upgrade date isn't for one specific date, but for that date onward. You're not required to upgrade. If you choose not to, your account will remain active on a month-to-month basis.

Shipment completion check is erasing load start and load end dates & times

Once the load start, load end is clicked during the pack process, the system reads this just fine. Once ship complete happens, the system is erasing the load start load end.
We are capturing the difference between Load end and Load start as Packing time in a custom report. Similarly the difference between Shipment end and Shipment start as Loading time. But we post goods issue the delivery by ship complete button the dates and times are gone. Any idea of how and where I can configure this not to disappear even after the ship complete. Thank you.

Have you checked the table VTTK with different fields before completing PGI? In other words you are wiping out the loading start and loading end details some how. You should have a value in your VTTk value before PGI. Check that.
Regards,

How do I select range and require end date in it crystal report

I'm trying to select a range of dates in my records however it must include the end date from my parameters what is the syntax for that record selection and anything after the Start Date (open). If the Date range doesn't end in the specified End Date then I don't want to see it.

well I created two reports one with pulling all the end dates data then the other report with the stuff before that date and put the end date as a subreport in the other one so he can see what was done recently on the subreport and scroll through the other report while the subreport stays on the results bottom end - however he has to scroll through 100's of pages to find the data he wants so he doesn't like that. However it is a good mockup of the results he wants ...but he doesn't want to scroll through 100's of pages - my guess is he wants one report with end date only and any dates before hand.
Original
Part                         TransactionDate                         Qty                     Unit cost
GA101                    10/11/2013                                  5                         1.23
GA101                    5/25/2012                                   10                        2.23
GA101                    8/14/2011                                   15                        5.15
HE8924                  8/22/2014                                   14                        4.25
HE8924                  6/13/2012                                   2                          3.25
UY325                    8/22/2014                                   5                         6.32
UY325                    7/10/2010                                   2                         3.25
TE5689                  8/12/2014                                   1                          8.14
TE5689                  5/16/2013                                   2                          9.12
IO8978                    8/22/2014                                   6                         8.25
IO8978                    5/20/2013                                   8                         7.25
IO8978                    3/15/2012                                   4                         9.25
IO8978                    1/20/2009                                   5                         10.25
MY CODE RESULTS SHOULD SEE
START DATE 01/01/2011 END DATE 08/22/2014
Part                         TransactionDate                         Qty                     Unit cost
HE8924                  8/22/2014                                   14                        4.25
HE8924                  6/13/2012                                   2                          3.25
UY325
8/22/2014
    5
   6.32
IO8978                    8/22/2014                                   6                         8.25
IO8978                    5/20/2013                                   8                         7.25
IO8978                    3/15/2012                                   4                         9.25

HT3224 I am new to Mac and started transferring data from my PC to my new Macbook Pro. Connection was lost once I started and now my Pro is stuck on the 'Transferring Information' screen. How do I get out of this screen to attempt the connection again?

II am new to Mac and was trying to transfer data from my PC to my new Macbook Pro. The connection was lost however and now my Pro is stuck on the 'Transferring you nformation' screen. How do I get out of this screen so I can attempt the connection again? Is it safe to force shut down of my Mac and will it still prompt me through all the setup process again?

Welcome to Apple Support Communities
If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

Capture Latest start and latest end - date and time through PI category.

Hi Guys,
I want to capture latest start and latest date and time of each of the individual phases through PI categories. i.e these values should flow from process order.What characteristic do i have to include? I know PPPI_EVENT_DATE and time will not work for this.

Thanks for your response Avinash.
Btw, I have viewed all these notes 368289.1, 603233.1, 399056.1, 329692.1, 1146414.1 already, but these don't seem to solve my problem because in each of these are under assumption that the initial Joining Date of the employee (i.e. Effective Start Date and Latest Start Date) is entered correctly without an issue, and these notes talk about dealing with 'Updating or Correcting' the data.
But In my case the pre-conditions are different, although those are making the system to respond in the same way (i.e. showing same error) some how.
As far as deleting the employees is concerned, yes that could be one option, but I am not really sure about adapting this solution as the dates I used in my case were just example dates, and in actual these employees are created almost 1 month back and they are already used in Projects module, CRM module and others.

Hyperion Planning dynamic forms based on start and end date across years

Hi All,
I have a requirement where i need to be able to view a form showing periods across years that are dynamically built depending on the start and end dates. If i have a start date of 01/11/2009 and an end date of 31/7/2013 i want to be able to view a form that shows all of the periods (Jan,Feb etc) in a form that is driven by these dates, in addition it will need to show the actual scenario up to the current month and the forecast from the current month to the end date. So basically if a user inputs the start and end dates the form will display the relevant periods driven by these dates.
Any tips very much appreciated!

Hello,
This is difficult to realize, but you can get quite far with a workaround. The first question is, where do you want to input your selection of time periods? Assuming you have a webform with the complete timeline in months and years and you type in the start period and end period.
Webforms have the option to suppress rows and columns.
This can be extended with option of empty cells or not empty cells.
You will need to apply your creativity on this.
Put every month-year combination in a column and add the suppression.
Calculate the timeline between start period and end period with a dummy member, so data exists for these and columns will show.
Maybe you will need to copy the required timeline into a separate version for this, to avoid having periods which were outside the selection and still have data.
I hope these hints help a bit in this challenge.
Regards,
Philip Hulsebosch
www.trexco.nl

Scheduling start date and end dates

Hello Gurus,
I am trying to understand the schedule start date and schedule end date functionality in Plant Maintenance. I do understand the basic start and end dates. Currently I set up u201C3.Do not adjust basic dates, dep rqmts to order startu201D and set the scheduling type as u201CForwardsu201D . Please note we donu2019t do any capacity planning or leveling.
So my question is, why the scheduling start date is defaults to the basic start date for forwards and scheduling finish date defaults to basic finish date for backwards ? I tried adding couple of operations and save the work order. It did not change anything in schedule dates.
Do we really need to care about scheduling dates if we donu2019t use capacity planning ?
Please advise
Mahee

Hi,
As per priority, final dates would be calculated as we will define the duration based on the priprity. Either current date or basic date only applied to Scheduling start date.
You can change the scheduling start date so that based on priority, final date would be calculated.
Regards,
Maheswaran.

Planning attributes in 11.1.2.2 and start/end dates in a cell

Similar Messages

Maybe you are looking for