Planning Horizon Business Content

Hi,
Does anyone know if there is a business content for Planning Horizon for Stock - via transaction MD63/61 ?

Dear Mohd,
there is no standard extractor available for your data , You can use a Generic Extraction on tables PBIM and PBED to get your desired data .
Hope it helps.
Thanks,
Krish

Similar Messages

  • Financial statement planning / Investment planning business content

    Dear all,
    Has anyone actually been able to make any of the standard business content for these areas work?  The content has been there for 6 years but still creates innumerable headaches.  I have managed to install the BC for e.g. financial statement planning based on cube 0SEM_C06.  I then loaded the data using program UPB_DATA_IMPORT.   This unfortunately was not sufficient for the majority of folders to work as the BC data provided did not cover the majority of infoobjects and contained none of the necessary hierarchies. I worked through the optios entries and generated the MD and hierarchies manually (though of course I have none of the texts or attribute information).  Despite doing all this I still find some of the functions do not work.  There are short dumps e.g. where it searches for planning functions that do not exist in UPF_PLNTP. 
    I see no notes on these problems, no SDN forums suggesting other people have run into these problems.  We are BW 2004S patch 9 so I can't believe it is a patch problem.
    Have I missed something in the ATS are which affects the set up of the master data and the available functions? 
    I would be very grateful for any comments of success stories or otherwise.
    Many thanks
    Heidi.

    Hi Andrew,
    Thanks for coming back to me. 
    We are not really intending to run using business content but want to activate it to use it as a guide on which to base our development.  What I am staggered by is how difficult it has been to make it work.  What I am wondering is: Are we having these problems because our system started off as a 1.2B BW system that has been upgraded all the way to 2004s? Are we missing table entries that we would have if we had started our BW system as a V 3.5 for example?  If another implementation has activated all the BC without problems I will go back to OSS and ask them to provide the missing entries.  If everyone has had the same problems I will soldier on.
    Thanks
    Heidi

  • WBS planned data - which Business Content Source ?

    Hi Experts.
    Hope you can help me.
    I am trying to find the planned data for wbs element in datasource 0CO_OM_WBS_2, but the source gives 0 rows.
    I know there are some wbs elements lines that are planned for in transaction CJR2 ( Planning of cost on WBS element )  on the R/3 side.
    Please help me to find the correct Business Content source for these numbers .
    Or tell me if there are some things that need to be done on the R/3 side.
    Ingrid

    Thank you very much Stefan.
    We are looking at it right now.
    Do you happen to know how to single out only plan data as well.  We are thinking of not using this source for actuals, since it is without delta.
    Do you have any experience here ?
    Ingrid

  • Business content-Personnel Cost Planning

    Hi, expert
    Now, our clients work in HR dept. wants to do personnel cost planning in BW side.
    1) is there any standard business content for Personnel Cost Planning in SAP?
    2) and if we have how to active these required BCT.
    3) Does SAP have 'personnel cost planning'  best practice? If Yes, please post useful links just about 'personnel cost planning' best practice information and documentation.
    Thanks for your kind support.

    Hello,  
    See this link for [Personnel Cost Planning|http://help.sap.com/saphelp_nw04/helpdata/en/88/b11d3ca2a25013e10000000a114084/frameset.htm] and [Personnel Cost Planning and Simulation|http://help.sap.com/saphelp_nw04/helpdata/en/13/be533dd5ce930fe10000000a114084/frameset.htm]
    See this for all [Human Resources |http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm]Related BW Information
    [Thanks|http://chandranonline.blogspot.com/]
    [Chandran|http://chandranonline.blogspot.com/]

  • Project Systems Business Content - Residual Order Plan

    Hi all,
    I a issue which I hope someone can help me with:
    I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
    I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
    Many thanks,
    Leo

    Hi,
    We are searching for project versions(project systems) business content :
    Base tables :
    VSAFVC_CN     Version: Operation in order
    VSAFVV_CN     Version: Quantities/Dates/Values in order operation
    VSAUFK_CN     Version: Order master data
    VSEBAN_CN     Version: Purchase requisition
    VSEBKN_CN     Version: Purchase requisition account assignment
    VSJEST_CN     Version: Individual status per object
    VSJSTO_CN     Version: Information on status object
    VSKBED_CN     Version: Capacity requirement records
    VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
    VSKBKO_CN     Version: Capacity requirements header for an order
    VSKOPF     Version: Header - general data for a version -
    VSKPER_CN     Version: Workforce Planning
    VSMLST_CN     Version: Milestone
    VSNPTX_CN     Version: PS texts (network)
    VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
    VSPROJ_CN     Version: Project definition
    VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
    VSPRTE_CN     Version: Scheduling data for project item
    VSPRTX_CN     Version: PS texts (WBS)
    VSPSTX_CN     Version: PS texts (header)
    VSRPSCO_CN     Version: Cumulation table for project reporting
    VSSTEU     Version: Control table - one entry per version object -
    I didn't find any relevent business content for above tables.
    If anybody extracted these ,please let me know where and how they extracted.I will assign points.
    Thank you,
    GSR

  • BPS Business Content for Cost Centre GL planning

    Hi All
    Would anyone be able to tell me where I can find the Business Content to activate for the areas of:
    Cost Centre GL planning
    Annual budgeting
    Forecasting
    Balance Sheet budgeting
    What bits will I need to activate or can anyone point me in the direction of some doco for this?
    Thanks
    Pete

    Hi Pete,
    All objects starting with 4 are Business content objects. For activating these objects you need to follow these steps:
    1.Create customizing transport request in cliet 000
    2.Collect required Planning Objects in this transport request: Planning Areas, Global Planning sequences, Planning Profiles
    3.Log on to Working Client
    4.Choose Transaction SCC1
    5.Enter Source Client 000
    6.Enter Transport Request Number of Client 000
    7.Mark "Incl. Tasks for request“
    8.Choose "Start immediateley"
    If you need more info, give me your mail ID and I'll send you some docs on the subject.
    Regards,
    Praveen

  • BI Business content in BI 7.0 flow

    Is there any place where the release plan for BI Content is available?
    The basic thing that I want to know is when will be the BI 7.0 Version of Business Content be available? This would help in deciding to activate the current BW 3.5 flow or wait for BI 7.0 flow.
    I am planning to implement the Business Content for Plant Maintenanace (PM). I know that now the content is in BW 3.5 version, but no idea when will it be available in BI 7.0 flow.
    TIA
    Abhishek

    Hi
    My question is whether SAP is providing the Business Content for PM in BI 7.0 flow or not? We have to install the Business Content on BI 7.0 system. So if SAP is providing the content in 7.0 we will install that directly and enhance it when required.
    Otherwise we have to install the 3.5 content and then upgrade to BI 7.0 flow as and when we modify/enhance the content. The only problem here is we will have to understand the custom routines in the content and migrate them to BI 7.0.
    I hope you understand the requirement.
    Regards
    Abhishek

  • Report on PCA: Transaction Data (0PCA_C01) (Business Content)

    Hi,
      I am using a business content cube 0PCA_C01 and a report (Business Content) Plan/Actual/Variance.
      But i need to have info on on Profit CenterCost center and cost element.As the cube is business content,only profit center info is loading now.How can I load  Cost center and Cost element  data.
    My question is
    1)     From where I can (In which tables) pick the data from to modify the data source
    2)     As the data source is based on view (ISPCACST),How can I check on which tables this view is developed.
    Thanks

    depends which datasource you are feeding the data with
    If you are using 0EC_PCA_3 then you are doing it via the GLPCA table and a timestamp extarctor
    If you are doign it via the 0EC_PCA_1 in FULL load then you are doing it via the totals tabel GLPCT
    If you are oding it via the 0EC_PCA_1 in delt amode you are actually doing it from GLPCA line items posted to the delta queue in RSA3 that looks the same as the GLPCT table (ie its aggregated in the delta queue)
    In your installation does cost centre = profit centre and does GL account = cost eleemtn
    If they do just add these to the cube and map them from the base data so profit centre in cube gets loaded from profit centre and cost centre in cube gets loaded from cost centre
    Else - then you are in trouble as you dont have the cost centre information on PCA - thats what CCa is for
    An FI document can create a PCA and a CCA document
    A CCA document does not have to exist in PCA or FI (secondary cost postings)
    The reference doc number in PCA dn CCA can be used to poitn to the original FI document - thats where the link is
    If you dont use secondary cost postings - and the profit and cost centres are different why not build a cube of the GL4 datasource? All the data is in there - cost and profit centre

  • SEM business content

    Can anyone give some advice on the following: SEM 4.0 has been installed on our ECC 5.0 system. In client 000 many planning areas exists, however in the working client 020 none.
    How do I activate the business content in the working client?
    Kind regards,
    John.

    Hi Sat,
    The link you provided deals with activating Business Content in BW, but I have checked that and all cubes and queries have been activated successfully.
    But I didn't mean the business content in BW, but in ECC (more specific: the planning areas in BPS).
    Any ideas?
    John.

  • Business content upgradation risks

    Hello BW xperts,
    I am a newbie in SAP BW using BW version 3.1. Our client team is planning on a business content upgrade from version 3.1 to 3.2, in which I don’t have any experience. They want to know <b>what are the risks involved</b>, especially,during situations <b>when the standard SAP objects, being used in queries, get modified;is there a need to manually activate the objects or does it  happen automatically?</b>
    Can anybody please help me out with this?
    Thanks in advance,
    Minuj....

    http://service.sap.com/upgrade-crm
    https://websmp202.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&
    Re: ALE Developer Role
    http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b21f98be886a45a4bb7e123e86e4c2/content.htm
    Use these links hope this will help you..?
    MSR

  • Business content implementation timeline

    Hello folks,
    Trying to get an idea of timeline to plan for implementing standard business content for the new G/L functionality and Asset accounting. Assume a brand new SAP BI install EHP3 and no customization. Will appreciate any guidelines to consider for this.
    Thanks!

    No customization?  Standard guidance is that business content only gets you 10-20% of the way....
    Also still many variables...performance optimization...for instance do you use FI_GL_10 or FI_GL_12...same content but different method of delta extraction and big concern depending on requirements....Also do you plan to convert business content to follow current best practice?  LSA/EDW approach?  Or leave it in 3.x format?  Queries?  Implementation of MultiProviders?  Time to design security roles and validate?  Bex web or simply analyzer?  Are you wanting to know end to end time for no customization and integration testing with users, and time to go-live?  Or just straight content activation time in development only? 
    The straight up content activation time with no customization, testing, etc. is the smallest part of the project, but is still significant depending on which InfoProviders you choose, etc. 
    You can stand it up in a couple of weeks...but you'll spend months making it useful.

  • Treasury Business content

    Hi SDN,
    I have to create BI reports based on Treasury module - Cash management, Liquidity planning
    I have installed business content DS, Infocubes and loaded data from R/3. But I am not seeing any relevant data required for reporting. And also I don't see data coming into Liquidity planning cube at all.
    Do we have to create generic DS to get required results? If that is the case, why do we have these Business content anyway?
    Did anyone work on Treasury module; can someone please guide me on this?
    Thanks,
    Dev

    Hi Kumar,
    when you say, "I am not seeing any relevant data required for reporting" do you mean no data is loading to cube or you are not seeing data in reports?
    If there is records loaded to cube, please check the data in Listcube transaction and run the reports for the time period or any other filters you may have on the report, matching the data in Listcube.
    For Liquidity planning data, please check the RSA3 transaction in ECC to make sure you have data in ECC.
    Good luck,
    vijay
    Edited by: Vijay krishnan on Jul 16, 2010 4:48 PM

  • Business Content Best Practice

    How do we go about evaluating Business Content for a project? Any tips/tricks/best practice used when dealing with Business Content?
    What are the dos and don't of Business Content?

    Hi Greg:
    To access the Best Practices using Business Content  do the following:
    1.-Open this URL: http://help.sap.com/bp_bw370/html/index.htm
    2.-Click on the "Preconfigured Scenarios" link.
    3.-Click on the Links to navigate on the different available scenarios and to see the documents you can download (Scenario Documentation, Scenario Installation Guide and Building Blocks).
    *Financials
    -- Financial Accounting Analysis
    -- Controlling Analysis
    -- CO-PA Analysis
    -- Cost Center Planning
    -- Reporting Financials EhP3
    *Customer Relationship Management
    -- Sales Analysis
    -- Cross-Functional Analysis: Financial and Sales Data
    -- Booking Billing Backlog Analysis
    -- Sales Planning
    -- Scheduling Agreements Analysis
    -- CRM Analytics
    *Supply Chain Management
    -- Purchasing Analysis
    -- Manufacturing Analysis
    -- Inventory Analysis
    -- Demand Planning Analysis
    -- Resource and Operation Data Analysis
    *Product Lifecycle Management
    -- Project System - Controlling and Dates
    *Human Capital Management
    -- Cross-Application Time Sheet
    -- Time Management - Time and Labor
    -- Personnel Development - Qualifications
    -- Travel Management - Travel Expenses
    *General
    -- Data Mining - ABC Classification
    Regards,
    Francisco Milán.

  • BI 7 Service Management Business Content

    Hi Fellows: I've never worked with Service Management. I was asked to put together all the names of Standard Business content Infocubes and Queries. I was told by one of the R/3 consultant that I would find those cubes and Queries under QM since the data was to come from Plant Maintenance. Is that right? He listed the following cubes for me to look into
    Notifications: 0QM_C10
    Notifications - Activities: 0QM_C07
    Notification - Tasks: 0QM_C08
    Notifications - Items: 0QM__C09
    Notifications - Causes: 0QM_C06
    Service Orders - OCS_C02
    Service Orders - Operations: OCS_C03
    Service Orders: Costs and Allocation: 0CS_C01
    Simulated Maintenance Costs: 0PM_C05
    Budget Data for Plant Maintenance (Transactional): 0PM_C06
    Plant Maintenance Budget Data (MultiProvider): 0PM_MC01
    Any help would be greatly appreciated and points rendered for sure. Thanks
    B

    Ravi (or anyone else who can answer this in case Ravi is busy): thanks again for answering the questions. I right clicked the infocube 0QM_C10 in the 'BI Content' section and selected 'Display Description'. I then get the detailed metadata of the infocube. Perfect so far. I then click on the link that says 'Network display of the data flow', where I get the detailed data flow and its wonderful. The only issue is that the DataSources listed in the diagram are not listed as the datasources for the Customer Service DataSources in help.sap.com. Any reason for that?
    Does that mean I need to activate all the datasources and infoobject for QM and Customer Service under Production Planning?
    Hope I didn't confuse you. Thanks again.
    P.S. for Sayed: if you get a little white blank screen then just maximize it and wait for a short while. Also see if you can scroll up or down. The diagram might be hidden.

  • HR Benefits Business Content - no percentages included

    We need to bring Benefit Plan percentage amounts from PA0169 into BI.  We cannot find business content for these key figures.  What have other companies done to bring this type of information into BI?

    Problem is solved. There were 3 Background Processes which blocked the system.

Maybe you are looking for