Planning the Ports

All,
For oracle 11i financials installation, i need to submit a list to the network team of all ports that would be needed to be opened.
We are planning to install 11.5.10.2 with ssl, 10g DB, ASM, Rman OEM & Dataguard to start with on AIX.
Is there a template which can be useful for planning the ports in advance. Or any suggestions would be helpful.
Thanks in Advance,
Anoop

Well, it depends on your system configuration. For example you can enable SSL for HTTP and make it listen on a specific port number you specify (as long as it is not used).
If you will consider installing Oracle Applications Server 10g and integrate it with Oracle E-Business Suite then implementing SSL on Apps11i is not enough as you have to implement SSL for Oracle Applications Server 10g as well.
For the DataGuard, same port used on the production database will be used on the physical standby database.

Similar Messages

  • I want open the ports and allow the telnet port also

    Dear sir 
    dis is my router configurations
    router#show running-config
    Building configuration...
    Current configuration : 1588 bytes
    ! Last configuration change at 06:58:58 UTC Tue Apr 8 2014
    version 15.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname INFOVEE
    boot-start-marker
    boot-end-marker
    no aaa new-model
    ip cef
    ip name-server 182.xx.xx.xx
    ip name-server 182.xx.xx.xx
    no ipv6 cef
    multilink bundle-name authenticated
    license udi pid CISCO1941/K9 sn FGL172820EP
    interface Embedded-Service-Engine0/0
     no ip address
     shutdown
    interface GigabitEthernet0/0
     ip address 10.0.0.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
     duplex auto
     speed auto
    interface GigabitEthernet0/1
     ip address 103.xx.xx.xx 255.255.xx.xx
     ip nat outside
     ip virtual-reassembly in
     duplex auto
     speed auto
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    ip nat inside source static 10.0.0.10 103.xx.xx.xx
    ip nat inside source static 10.0.0.11 103.xx.xx.xx
    ip nat inside source static 10.0.0.12 103.xx.xx.xx
    ip nat inside source static 10.0.0.14 103.xx.xx.xx
    ip nat inside source static 10.0.0.15103.xx.xx.xx
    ip nat inside source static 10.0.0.16 103.xx.xx.xx
    ip nat inside source static 10.0.0.9  103.xx.xx.xx
    ip route 0.0.0.0 0.0.0.0 103.xx.xx.xx
    control-plane
    line con 0
     password 12345
     login
    line aux 0
    line 2
     no activation-character
     no exec
     transport preferred none
     transport input all
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
     stopbits 1
    line vty 0 4
     password 1235
     login
     transport input all
    scheduler allocate 20000 1000
    end
    we have server  only .. we want allow particular ports allow to my server how to open the ports in router please help me ... if any configuration mistakes please  help me ....
    Thank you 

    I'd advise you to download and use Cisco Configuration Professional (CCP) if you want to secure your router and setup some access-lists for your servers.
    Right now your setup is very insecure (no authentication beyond a simple plain text password on  the vty lines). CCP has a security audit feature that will remedy that and other issues.
    For your servers, you will need an extended access-list applied to your outside interface Gi0/1 restricting access to the NATted server addresses on the ports you want to allow.

  • J2ME - Pocket PC: neded advices on how to plan the application

    Hi,
    I plan to port to the Pocket PC platform an e-commerce application I developed using JSP/Servlet with BC4J (some pages use direcltly JDBC).
    My actual web application has those architecture and features:
    - the database is Oracle 8.1.6;
    - the output of the application is HTML (no use of Applets), with some JavaScript and css StyleSheets;
    - the application has the standard features of an online-shop, such as shopping cart management, product search;
    - the application gives to the customer other informations, such as order-tracking, sending of news documents to the customers, ecc...
    My PDA application should have this features:
    - on-line and off-line work (connected to the Internet or to a local replica of the database);
    - Only the shopping features are requested.
    I have some doubts on the best strategy to follow to develop such an application:
    - Which database to use (Oracle lite or XML files or ???) to store the data on the PDA?
    - How to manage the data replication?
    - For the on-line work, I think that the user can connect to the standard Web Application (or to an optimized version for little screens). What is your opinion?
    - For the off-line work, I am not sure which GUI to use for the client (HTML or Swing)? I read on this forum about problems with css with Pocket IE; have I to avoid the use of css stylesheets?
    - If I write my application using BC4J, how big will be all the application in Mb (jars, application server, etc...)?
    - Which software do I need for the development and for the deployment (I am now downloading the J2ME Extension and Viewlets)?
    - Other issues I have to care about?
    All help and/or samples and/or useful links/readings are welcome.
    Thanks,
    Marco.

    Marco,
    Considering the processing capabilities of a Pocket PC, I wouldn't go for J2ME, with is mostly dedicated to the cell phones. The PDAP (PDA Profile) for J2ME is not available yet, and your UI would look pretty poor on a Pocket PC as the only available profile so far is the MIDP (Mobile Information Device Profile).
    The other solutions you suggest sound much better, like Oracle Lite. OLite has native synchnronization capabilities with Oracle Enterprise Edition, and that would address your replication needs. Plus it provides a connected/disconnect feature for HTTP/Servlet/HTML that makes the user work transparent. I do beleive that this is avalaible for the Pocket PC as well.
    You should serach OTN this way for white papers, demos and sample code.
    Please let us know if you need more information,
    Olivier

  • I cannot use any external monitor, it appear like the port doesn't work , i'm using the mini-dvi port with a VGA adaptor ,

    I've always used the port normally with different monitor but by a couple of weeks it appear like no signal come out.
    Does Anyone knows what can i do ? i.e. How to check or reset the Mini-dvi port ? or if there's any key on the keyboard that can habilitate it or not ?
    Any Help will be appreciate
    Thanks

    Welcome to Apple Support Communities
    You don't have to do anything to make the port work. Reset the SMC > http://support.apple.com/kb/HT3964
    If it doesn't work, try with another monitor to see if it works or another cable. If you haven't got another display, take the MacBook Pro to an Apple Store or reseller, so Apple will test the port and see if it works correctly

  • I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

  • Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port.

    Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port...
    Someone told me just to remove the chip in clicking it to the trash can and voilá - it would be done. But as I did so, on the screen appeared a text which let me know, that that way had been the wrong one...
    I should have clicked Finder plus something.... which I do not now remember but which was then not found behind the Finder.
    So please would someone be so kind and tell me, where I can find explanations for the most simple functions. The manual I got does not include a clue.
    Thank you!

    First make sure that no application is using or has open any files on the disk. Then:
    Click and drag the disk icon on the desktop to the trash. Wait for the system to recognize the action, and the icon should disappear from the desktop. It is then safe to remove the device.
    Alternatively, you can secondary click on the disk icon, and then primary click "Eject (name of disk)". Wait for the icon to disappear off the desktop, and then it is safe to remove the drive.
    Here is a detailed help document on the subject.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1056.html

  • The Port : 6001 is not working in the system

    Hi Experts,
    OS   :  AIX 6.1
    SAP :  SAP Netweaver EHP1
    In the OS level the Port : 6001 is not working and giving the out put as...
    pb2adm> telnet abcprdpb2 6001
    Trying...
    telnet: connect: A remote host refused an attempted connect operation.
    Virtual host : abcprdpb2
    As it is the BI java stack system & I configured the SMD & wily in the system. From the BI java stack system the wily agent is not working and it uses the port : 6001.
    Now the issue is regarding to the port : 6001
    when telnet in the same system which is Virtual host : abcprdpb2 is not working and which I have given the output above. It is working when I telnet to the other systems. Please see the output  below...
    pb2adm>  telnet abcprd001 6001
    Trying...
    Connected to abcprd001.
    Escape character is '^]'.
    Connection closed.
    From other system  virtual host : abcprd001
    As I have checked with the firewall team and said it is fine in the system and same us AIX team also. But still port : 6001 issue is not resolved in the Virtual host : abcprdpb2
    Can you please let me know how to open the port : 6001 in the Virtual host : abcprdpb2 and also how we can confirm that port : 6001 is opened or blocked in the Virtual host : abcprdpb2.
    Thanks & Regards,
    Sandeep.

    Hi,
    The both mentioned virtual systems are in different LPAR's (Physical host).
    Already I have checked the /etc/services and looks every thing is fine in the file. I have also checked the file inetd.conf  and I didn't find any thing # on the Telnet.It seems every thing is fine in the both files.
    Can you please look in to it and provide some thing which I have to look in the OS level.
    Thanks & Regards,
    Sandeep

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • How can I open the ports with the Airport Extreme?

    I have an Airport Extreme Base Station connected to a cable modem and I want to open the ports for the two Playstation 3's I connected to the Airport Extreme via Cat 6 ethernet cable. The first Playstation 3 will be used to play Call of Duty Modern Warfare 2 and the other Playstation 3 will be used to watch streaming movie from Netflix. Does anyone know if this can be done?

    It is documented on Page 54 of Apple's "Designing
    AirPort Networks Using AirPort Utility Mac OS X v10.5 + Windows" (direct PDF download link).
    The public port and private port would be set the same value.

  • My ISP tells me I need to I need to change the port to send/receive e-mails, but I can't remember my Mail password to add an account. How can I proceed without the password?

    My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.

    your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.

  • Is there any way to set a stealth  mode on the ports in Panther

    The built-in firewall in Tiger provides a 'Stealth Mode' setting that makes the ports nonresponsive to external attempts to connect. The Panther firewall doesn't have this capability. Does anyone know of a way to enable this on a Panther machine (specifically 10.3.5 & 10.3.6) - even if it involves installing a utility application is ok.

    Ok, question for Karl.
    When I go to https://www.grc.com/x/ne.dll?bh0bkyd2
    and do the ShieldsUP Stealth test from outside my hardware firewall connected directly to the internet (SSH turned off for the test) why do I get this result?:
    GRC Port Authority Report created on UTC: 2006-09-25 at 06:03:43
    Results from scan of ports: 0, 21-23, 25, 79, 80, 110, 113,
    119, 135, 139, 143, 389, 443, 445,
    1002, 1024-1030, 1720, 5000
    0 Ports Open
    0 Ports Closed
    26 Ports Stealth
    26 Ports Tested
    ALL PORTS tested were found to be: STEALTH
    Specifically ftp reports this:
    21
    FTP
    Stealth There is NO EVIDENCE WHATSOEVER that a port (or even any computer) exists at this IP address!
    The only thing that fails is the PING test. Because they can ping my address. I don't have firewall turned on and I am running 10.3.9 not 10.4.
    Any ideas? Is this test just not thourough enough?
    Run the test for yourself and see. You will need to click Proceed at the bottom of the page to start the test.

  • Error the port of the service registry

    Dear everyone,
    please help me, i got the error message as below:
    Information for this WSDL portType has not been obtained successfully. Some errors have occured.
    (E.g. some of the parent entities might be corrupted or unpublished.)
    Error message:
    WSDLException: faultCode=INVALID_WSDL: java.io.IOException: Connection to localhost:7201 refused
    Actually, my registry is run on port: 7301: http://localhost:7301/registry/uddi/web
    but I don't know why when I log to oracle enterprise manager, registry control and click on find_tmodel, then click to obtain the list of service in this tmodel; i get the error message above.
    Can anyone tell me how can I change the port value?
    Many thanks in advance,
    sophea

    Now it is ok, i can use registry console to change the port.
    registry console -> manage ->registry management - > replace url

  • While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

    storage-vdc(config-if)# show module
    Mod  Ports  Module-Type                         Model              Status
    2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
    sw1-gd78(config-if)# sh module
    Mod  Ports  Module-Type                         Model              Status
    2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
    4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
    7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
    8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
    10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
    Mod  Sw              Hw      World-Wide-Name(s) (WWN)
    2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
    4    5.2(2)          0.107   --
    7    5.2(2)          1.8     --
    8    5.2(2)          1.8     --
    10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
    sw1-gd78(config-if)# sh run int ethernet4/6
    !Command: show running-config interface Ethernet4/6
    !Time: Mon Feb 20 22:56:12 2012
    version 5.2(2)
    interface Ethernet4/6
      no shutdown
    sw1-gd78(config-if)# no shut
    sw1-gd78(config-if)# speed 1000
    ERROR: Ethernet4/6: Configuration does not match the port capability.
    sw1-gd72# sh int ethernet4/6 capabilities
    Ethernet4/6
      Model:                 DS-X9708-K9
      Type (SFP capable):    10Gbase-SR
      Speed:                 1000,10000
      Duplex:                full
      Trunk encap. type:     802.1Q
      Channel:               yes
      Broadcast suppression: percentage(0-100)
      Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
      Rate mode:             dedicated
      QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
      CoS rewrite:           yes
      ToS rewrite:           yes
      SPAN:                  yes
      UDLD:                  yes
      Link Debounce:         yes
      Link Debounce Time:    yes
      MDIX:                  no
      Port Group Members:    none
      TDR capable:           no
      FabricPath capable:    yes
      Port mode:             Switched
    sw1-gd72# sh int ethernet4/6 transceiver details
    Ethernet4/6
        transceiver is present
        type is 10Gbase-SR
        name is CISCO-FINISAR
        part number is FTLX8571D3BCL-CS
        revision is C
        serial number is FNS12090EMJ
        nominal bitrate is 10300 MBit/sec
        Link length supported for 50/125um OM2 fiber is 82 m
        Link length supported for 50/125um OM3 fiber is 300 m
        Link length supported for 62.5/125um fiber is 26 m
        cisco id is --
        cisco extended id number is 4
               SFP Detail Diagnostics Information (internal calibration)
                                         Alarms                  Warnings
                                    High        Low         High          Low
      Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
      Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
      Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
      Tx Power       -2.65 dBm       1.49 dBm  -11.30 dBm   -1.50 dBm     -7.30 dBm
      Rx Power       -2.21 dBm       1.99 dBm  -13.97 dBm   -1.00 dBm     -9.91 dBm
      Transmit Fault Count = 0
      Note: ++  high-alarm; +  high-warning; --  low-alarm; -  low-warning

    Ankit,
    You are trying to set speed 1000 on a 10g sfp.
    type is 10Gbase-SR
    You will need to insert a 1gig sfp and then you will be able to set the speed.
    Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

  • Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

    Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

    When this problem first happened, I searched for threads and found a few.  See be;ow links:
    http://support.apple.com/kb/TS1502
    Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
    It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

  • HT1414 I have the iPhone 4s. I have tried restoring my phone and cleaning out the ports, but I still cannot hear music or my videos playing. This happened after I did the last update on my phone. Is there anything else I can do? This is really irritating.

    I have the 4s. I have recently restored my settings and cleaned out the ports. I still cannot hear my audio for music or videos. My volume on the side of the phone does not work either. Everything workds in the setting menu. It is not a speaker issue because the ringtone works when people are calling and I can listen to the different ringtones as well. My notifications and text message audio does not work. My phone does not say that it is on a dock. When I try listening to music, the volume adjustment appears, but it is gray and unusable. Everything works when headphones are in plugged in and when it is on the dock. This started with the last iPhone update. What else can I do... this is becoming very frustrating.

    Hi shanny202.
    Really strange problem you have there. I have a few questions though.
    Please try again and try to make the phone as a new without restoringen with you iCloud-data or backup-data from iTunes. Maybe it is something wrong with the data (strange).
    Anyway, i think you should call Apple Support or visit an Apple Store, don't forgot to make a Genius Bar reservation.
    You locate the nearest Apple Store here: http://www.apple.com/retail/storelist/
    And here is Apples phone numbers around the world for support: http://support.apple.com/kb/HE57

Maybe you are looking for