Platform.conf only has 2 lines after install

Environment:
App: Sun ONE Portal Server: Secure Remote Access 6.0
OS: Solaris 2.8
Basic config setup: Portal Server (and SRA) installed on one machine. No SSL. The Portal Server, Gateway and Rewriter proxy are all installed on the same machine.
Problem description:
After everything is installed, /etc/opt/SUNWps/platform.conf is missing info unexpectedly. It only shows the following lines:
gateway.bindipaddress=10.41.7.210
gateway.sockretries=3
Question: This doesn't look normal...Is this supposed to happen?...If not, what could be some of the reasons this is happening?
When I installed the gateway and re-writer proxy, I specificied the same profile name for them both as according to the SRA admin guide: "Ensure that the rewriter proxy and the gateway use the same gateway profile."

You must use different profile names if you are installing the gateway and the rewriter proxy on the same machine. If you use the same name, you get the result you describe.
The SRA admin guide is trying to say that you must refer the rewriter proxy to the correct gateway profile. This is described in the SRA installation guide.
I suggest you uninstall the gateway and the rewriter proxy and re-install both with different profile names.

Similar Messages

Portege 3110ct has no sound after installing XP Pro

I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.

Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet.

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

Brand new Mac, had to erase drive through disk utility as time machine back up failed. Now disk utility only has the option to install Mountain Lion which my Mac won't allow. Anyone any ideas as my Mac won't load anything up but disc utility!

Brand new Mac, had to erase drive through disk utility as time machine back up failed on initial setup, USB cable popped out Now can only access disk utility as won't load to log in screen. The only has the option in disc utility is to re-install Mountain Lion which my Mac won't allow or loading another time machine back up but after an hour of it processing, that didn't resolve the issue either! The time machine back up is the latest back up of my Mac Book Pro which was using OS X Maverix. I'm guessing I'm going to have to take my Mac to the store but that would be a hassle so does anyone have any ideas?

Follow this guide using another Mac.
Insert your newly created Mavericks USB into you Mac, press the power button and then hold down 'option,' until it gives you an option to boot from the USB. You will then be able to erase the internal disk with Disk Utility and reinstall Mavericks straight after.
After that you should be able to use Migration Assistant to restore your applications and user data.

Ethernet has stopped working after installing "Security Update 2010-003"

I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange". The wifi still works.
Has this happened with anyone else? I am curious as to how I can either uninstall the update or make the ethernet work again..
Much thanks for any recommendations you may have.

Hussain Ameen wrote:
I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange".
Welcome to Apple's discussion groups.
I'm not having that problem after installing the security update.
If you open the Network panel of System Preferences and select the Ethernet connection item, is it set to "Configure" "Using DHCP"? Do you see reasonable values for "IP Address", "Subnet Mask", "Router", and DNS Server"?

Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8

*Help*! After installing itunes 8 my CD/DVD/RW has been disabled.
This has happened before and I have restored it by deleting the upper and lower filters in the Vista registry but then itunes tells me that "The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." and I am unable to burn anything from itunes.
Does anyone out there know how to restore the CD/DVD/RW drive and retain the full use of itunes please?

Have you tried to reinstall iTunes?
Reinstall the old iTunes, reboot the computer and clean by using CCleaner. Then you can install the newest version of iTunes.
If it doesnt work try to remove the upper- and lower filters again. Maybe you should do this after you have reinstalled iTunes.
Last but not least, this could be useful for you:
http://aps2.toshiba-tro.de/kb0/TSB84026P0000R01.htm

HP Power Advisor has stopped working after installing latest updates

I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7. After installing the latest Power Advisor updates it no longer works. I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled. I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates. Any ideas how to solve this?

Well on the website for HP power Advisor, it specifically says,
"Accurately estimate power consumption of your HP server and storage products"
There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
Sorry,
Good Luck!
Did I help you? Please give me a Thumbs up to help let others know!

HT1423 My imac G5 only recognizes one slot after installing 2x2 GB ram

My mac is a early 2009 model running 10.7 software. I realized it was running pretty slow so i decided to upgrade the ram from 2GB to 4GB. After installing it, i checked my memory and it recognizes one slot and not the other.

I swapped them and it showed that the other slot did not recognize it either.
Its the correct RAM for my computer, I contacted the seller and hopefully they would send me another. Thank you!

20" Widescreen display has weird lines after any movement of the cursor

there are groups of blue and red elongated dots (sets of 8) staggered horizontally on the screen, a few persistent and some that seem temporary but occur after any activity on the monitor (e.g. drag a folder or screen)
Some go away after a reboot, but reappear with new activity. Can anyone help?

I looked for you I would first go to System Preferences. Click on DIsplay you will see numbers under Resolutions go all they way to the bottom it should say 1680 X 1050 Hi light that on the 20inch Apple Cinema Displays. Next to where Display was is Color click that you flow the expert instructions
You will see only Cinema Display when done it will auto name it Cinema Display Calibrated
Check your DVI cable & GPU as could be loose
Instructions
To fix a stuck pixel
Increase your display resolution setting to the maximum supported by your screen. Launch the JScreenFix applet (below) and position the window over the stuck pixel. After 5 minutes move the window and observe the results. If the pixel remains stuck, repeat. From extensive testing, most stuck pixels are repaired in less than 20 minutes. If a stuck pixel remains after running JScreenFix for 20 minutes it probably can not be fixed by JScreenFix. You might like to try a pixel massage. Sometimes stuck pixels return after a period of time, JScreenFix deluxe can automatically repair reoccurring stuck pixels when you are not using your computer.
To reduce screen burn-in
Disable your screen saver. Launch the JScreenFix applet (below) and enter fullscreen mode. This is achieved by pressing F11 in most browsers, if this fails you will need to consult the documentation for your Internet browser. It is important that JScreenFix fills the screen fully or you may suffer additional unequal burn-in. Leave the applet running for about an hour and observe the results. If you notice an improvement, continue running JScreenFix until the burn-in is more acceptable.
Please note that completely removing screen burn-in is impossible but it will fade with time. The only way to equalise a screen image is to burn-in the parts of the screen that have had less use. JScreenFix deluxe is a preventative measure that monitors screen usage and equalises the screen when you are not using your computer.
Click on the link to launch It made my Apple Display look better
http://www.jscreenfix.com/applet.php?width=1680&height=1050
Screen burn, image retention and recalibrating pixels
Static, non-moving images left on-screen for extended periods of time can leave a "shadow” on , lcd displays (this is true of models from all manufacturers)
You are normally told to avoid extended display of static images. Games consoles can also have a negative effect on panels.
PixelProtector™ will recalibrate pixels uniformly and remove any residual effects that may have occurred.
TV channels that have a static logo permanently on screen have a real negative effect on lcd TV’s and displays. Pixels begin to memorise these images, upon switching channels you will still see the logo in the form of a shadow. After several minutes it will disappear (If not you have burn in). If 99% of the shadow has disappeared you will not notice the 1% that remains. It is the continual build up of the 1%’s that is called residual effect. Not just restricted to TV channel logos. It’s build up over months and even years will lessen the picture quality of you TV. The issues with screen burn and residual effects are far more complex however we have tried to simplify its cause and effect for obvious reasons.
PixelProtector™ can remove burn in and residual effects. It uses a wash tools that switch pixels on and off at a very fast rate (this is not in any way harmful). Included is a white wash for lesser burn in and image fix. In other words it recalibrates the pixels uniformly by removing any memory they may have.
There are different types and levels of burn in. The most severe of which occurs in the first 200 hrs of the panel's life when pixels are at there most excitable. In this time frame pixels can permanently memorise static images that have been left on screen for prolonged periods.
We have many customers who have removed screen burn from their panels by using the removal tool regularly, as per the instructions in the DVD.
In many cases it can be removed after just one session.
If the burn in is not removed first time, it will have been significantly reduced. Don’t forget it is easier to prevent burn in then it is to remove it!
Dead Pixels
Dead Pixels occur when the individual cells burn out or do not energise correctly, PixelProtector™ DVD Edition can help diagnose and in some cases re-energise dead pixels to help you get the very best out of your screen.
Many manufactures believe that 3 drop outs are acceptable. We believe even 1 drop out is unacceptable.
With plasma TV’s a dead pixel will appear black with LCD it may have only lost one wavelength and is only visible when certain colours are on screen. When you buy a new panel it is worth investing in a copy of PixelProtector DVD as some panel may have a drop out from the factory. Your best opportunity to have the panel replaced is when it is new.
User Friendly
PixelProtector™ has been developed with home users in mind. During its development stage one of the main obstacles we had to over come was insuring every one could use it (not just engineers and techno buffs). We tested the DVD on many groups of people whose feedback was invaluable in making PixelProtector™ the best product in the market.
We back up our product with full on-line support and help for all our customers.
PixelProtector™ provides a real user friendly solution to making sure your TV is performing to its full potential and that you are getting the best out of your equipment. It easy to use all you need is a DVD player! So click here https://www.pixelprotector.com/screen-cleaner.php
One of the biggest problems with monitors is most people never calibrate them and just use themstraight out of the box, a lot of people don’t even use their drivers disks. If a disk came with yourmonitor, even if it claims to be plug-and-play, use the hardware setup and install it, it gives you allthe correct refresh rates and color depths and screen resolutions possible. This allows getting themost out of the monitor while preventing damage. Also the hardware setup may create an ICCmonitor profile that Windows or the Mac OS can use with its Color Management System, ICM for Windows and ColorSync for Mac. While generally better than nothing, keep in mind it is a generic ICC profile, it can only assume average ambient conditions that are not likely to be yours
Common issues with LCD screens include:
Trailing or blocking effect on screen (pixilation)
Pixel drop out
Unnatural image blacks are dark grey
How PixelProtector™ can help resolve these issues:
Trailing can bee seen on some panels when bit rate levels are high.
High bit rate levels are normally reached when watching fast action scenes in movies or programs, the image starts to trail or lag and even blocking in some cases.
PixelProtector™ will help to minimize or even eliminate trailing buy calibrating your panel correctly and insuring you have the right settings and connection in place.
Pixel drop outs are one of the most frustrating of issues for anyone who has an LCD. When a screen suffers from pixel drop it can be fixed in some occasions. If the whole pixel is dead then nothing can be done to fix this. If one wave length has gone in the pixel i.e. blue. This can in some cases this can be fixed by recalibrating pixel color production using PixelProtector™.
We have a 4 in 10 chance of fixing the problem.
The DVD will highlight if the whole pixel is dead or if one wave length has gone.
One of the biggest issues LCD’s have is producing pure black. LCD panels produce a pure white light and then subtract the colors that are not required. So to produce black is difficult, making sure that you first calibrate its black and white setting is essential to minimize this issue and get the best from your panel PixelProtector™ includes specific tests and adjustment screens for this purpose.
I know Apple has help me in the past by telling me to make a 100% White pure white screen saver overnight.
I hope I was of help.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

Workflow only has 1st approver after restart even if more were there before

Hi,
We have are using a BADI, BBP_WFL_SECUR_BADI, to restart the workflow of a shopping cart. This restart is triggered when the price of the shopping cart has been changed and if the shopping cart has been partially approved (approvals consist of 2 or more approvers).
The BADI only includes 1 export parameter. In the BADI, I call function modules to check if the price has been changed. If true, then I set the export parameter to '2'. This restarts the workflow once the shopping cart is saved.
However, if the workflow had 2 or more approvers - after the restart, only the 1st approver remains in the approval preview.
Can anyone help?
Thanks.

Hi,
I think approvers are re-evaluated after workflow re-start.
Can you check workflow log in SWI1? If it shows only 1 approver, approver preview is correct. If it shows multiple approvers, it looks a bug in preview.
Regards,
Masa

250 Gig HD only shows 182 gig after install

Hi everyone.
I have an issue that has been bugging me for about 2 years. I am getting ready to do a major back-up and reinstall and thought i would ask about this.
The beast is a 700 mhz flat panel G4 768mb ram iMac. I installed a Seagate (i think, its been a while) 250 gb hard drive but it only recognizes 182 gb.(about this mac/ATA)
I have upgraded to tiger thinking that an upgrade would help but that did nothing for the recognition issue.
Is there anything I can do about this?
It's not really a problem. just bugs me a little.

actually it says 186.31 capacity in the "more inf/ATA" heading.
I didnt split it up if thats what you mean by partitioning it. I just selected the basic single partition or all one drive option then let the Apple disk utility do the rest.
I have tried permission and disk repair but that didn't do anything for me. I was going to attempt another erase and reinstall but I havent had the time to get everything backed up on my external drive.

Only 90MB disk space after installing iLife '11 - how to move iLife?

Hi, my installation of OS X is on a small SSD and I just barely had enough space to install iLife '11. I need more free disk space though so I need to move the largest iLife programs or maybe the whole thing. Obviously I wouldn't be posting here if the iLife '11 installer would let me install to my external drive but that wasn't the case. I tried "moving" iMovie but I got an error saying that I didn't have permissions. Thanks for any help!
MY LIBRARIES ARE EMPTY! So moving them won't help!

Well - I partially figured out my own solution. You can move iLife. I moved the apple loops in /Library/Audio and all the iLife directories in /Library/Application Support to my storage drive. I made symbolic links for each folder I moved. Then I moved the apps to the other drive. I also moved my home folder - thanks Tom. Now I have 4GB of space back and I'm not seeing any more slowdown. I realize now if I have any other problems I'll just symbolic link more stuff off my startup SSD. Works like a charm for now. I'll update this thread if I run into any trouble. I ran GarageBand and all the loops play instantly off the symbolic links. So to all of you - remember to think creatively! My only alternative was to reinstall os x on the regular HDD - glad I took a moment to learn about symbolic links.

Purple line after installing...

I just recently installed the new update to iTunes and Quicktime. As soon as my computer restarted a single purple vertical line of pixels appeared on my screen, at first it would disappear and appear at random, but now it is just stuck there. It is kindof annoying. I am wondering if this is from the install or if the pixels in my screen are broken. Any help is awesome, thanks.
p.s. I am not sure if this is the right place to post this, but i see it all the time while i am using Mac OS X...

if you create a new account (go to >System Preferences...>Accounts), does the pink line also appear there? Also, does the pink line appear even if there is a window over that spot?
Another thing you can try is repairing permissions and verifying disk:
Open disk Utility (/Applications/Utilities), clicking "Macintosh HD", and clicking "Repair Disk Permissions". Repeat that repair until no issues come up. Then click "Verify Disk". If an error comes up, post back and I will give you instructions on how to fix it.
If you get no errors on either of those (or fix them), you can try reinstalling the Combo Update.
1st, check if you have Intel or PPC:
Go to >About This Mac, and you will see Intel or PPC mentioned.
If you see Intel, get the update here, and if you see PPC, get the update here.
Good luck!
Message was edited by: joshz

Able to only view some clips after installing latest flash update

I find that I am able watch some clips, but only after having switched to a different quality setting as with this clip: http://www.break.com/index/worlds-fastest-roller-coaster-1955594
which will fail to run at 360p, but will run at 480p. Same problem with other clips, but if there is no option to change the setting, I am unable to play any clips.
I have uninstalled the flash update and reinstalled, then updated my graphic card driver, cleaned hd and have seen that it will play all clips sometimes for awhile and then go back to having these problems.
My connection is 7mbit.
Ideas?
TY in advance

I went to the site that you linked, and I can see the clip at 360p, but with lots of buffering breaks (my connection is 1Gbps), but won't load at all at 480p. I think something is wrong with that site.

Platform.conf only has 2 lines after install

Similar Messages

Maybe you are looking for