Playback Controls Do Not Function

I have created movies that have the playback control located
at the bottom center of the movie. I have published the movie in
both SWF and HTM formats. Usually, the forward, rewind, pause, etc.
buttons work but the Exit button does not work.
Does anyone know why it doesn't work? How can I make it work?
I do not know javascript, if you are going there. I am not a
developer. I am a software trainer struggling to make a
demonstration movie work. Any help would be greatly appreciated.
Please help quickly! I am in a bind!

Hi Susan
Here is one thing to try. It may or may not work, but may be
worth a shot.
Insert the following code:
JavaScript:var
pw=window.parent;pw.opener=window.self;pw.close();
Where?
* Insert > Button
or
* Insert > Click box
or
* Movie > Preferences > Start and end tab > Movie
End Options.
Configure "Execute JavaScript" as the action.
Click the ellipsis (...) button to produce another dialog.
Paste code from above into the dialog.
Click OK to dismiss the dialog.
Click OK to dismiss the properties or preferences dialog.
Publish and test the movie.
Cheers... Rick

Similar Messages

  • Volume control gray not functioning

    Mac Mini master volume control is gray and not functioning.  Currently running OSX 10.7.5, any thoughts on how to reset this function.  CoreAudio Quit/reset did not work.

    Hello CraigFam,
    Resetting your Mac Mini's SMC and NVRAM may help restore functionality to its audio out.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Additionally, if your Mac Mini has optical audio out capability, the information detailed in the article below may be helpful.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers,
    Allen

  • Volume control keys not functioning. PC model: s5268hk, with keyboard model: KG-0851

    I am using a desktop slimline model: s5268hk, with keyboard model: KG-0851. I don't remember what program I installed that caused the trouble but anyway, right now- it is not functioning like the usual. I re-installed the driver from HP support yet nothing has changed.  I appreciate any advice you can provide, thanks to everyone in advance! 

    You may have to go back to a known good system restore point.
    Right mouse click on my Computer, select properties, then advanced system setting then restore.  When you get to the restore window, check the box to show all available restore points and pick a date where your know when your PC worked correctly.
    If you are using a Norton AV product then turn off "tamper protection" before you attempt a restore or it will fail.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • E1200 Parental control seems not functioning well...

    Hello, friends,
    I have a LinkSys E1200 wireless router at home. I set up the parental control, limiting the internet access between 8am - 11pm only. However, to my surprise, my son can still use the facebook to chat with his friends after 11:00pm! I found this a few times!!
    I thought he downloaded some software so as to get around the router settings. However, he denied he did anything. While, with the other laptop, which is used by my daughter, the limited-internet-access-time-interval works fine: between 8am - 11pm only.
    Any ideas? Thanks a lot.

    Unfortuneately the web-based setup page doesn't give me that option. I have an E1200 Router, Firmware V2.0.04 and there is an "Access Policy" menu with the only sub-option of "Parental Control". There isn't an "Access Restrictions" menu with multiple options containing "Internet Access Policy". I verified that V2.0.04 is the latest firmware update, why do I not have this functionality?
    I appreciate the quick response and offer to help.

  • Quicktime frame controls do not function in Lion, window unresponsive

    This appears to be a trending topic on the support fora, but the solutions I've seen offered don't help.
    In brief: QuickTime on Lion loads and appears to play videos for me, but I can't access any of its frame controls. I can't resize the window, I can't minimize or maximize it, I can't close it, and I can't drag it. Attempting to click any of the associated controls simply brings the Finder to the foreground. Quicktime will then not respond to any further mouse clicks untill I click its icon in the Dock and force it into the foregroud.
    It's as though the QuickTime window is invisible to mouse clicks - with the exception of the play, pause, ff/rew control bar.
    Looking over other discussions, I uninstalled both Perian and Flip4Mac. I don't have the BetterTouch program. This did not change the behavior.
    I am disintersted in booting to safe mode or under a new user account every time I want to play a video, so do not suggest that, please and thank you. I'd prefer other than canned, page-1-of-the-script style replies. I realize that sounds abrupt, but such entry-level suggestions do not constitute useful or meaningful solutions, and those who offer them should be made aware of that.

    Brilliant. Absolutely brilliant. Solved the problem.
    What I did, actually, was download the Lion beta version of OnyX from http://www.titanium.free.fr - under 'Parameters', in the 'QuickTime' section, there's a button you can click to restore defaults. Did that, and sure enough the window corners went wounded again - and I could grab all my frames as before.
    Thanks for the pointer. Very nicely done.

  • VISA resource name control will not function in my compiled application

    Hi
    I am having a great deal of difficulty.
    I have compiled my application which drives an instrument over a serial interface. 
    In my uncompiled top level vi I can easily change the VISA control to a port the PC recognizes (the control has a drop down list of available ports).  Unfortunately in the compiled version this control is disabled.
    I really can't figure out what the problem is.  One thing to note is that when I run the complied application on my PC which has the full development version of LabVIEW (LabVIEW version 7.1) the control will work.  It is only when I try to run the compiled application on other PC's which have only the LabVIEW run time engine installed.  (Note: I know that the communications link is OK on these other PC's as I am still able to send commands to the instrument over HyperTerminal).
    I hope somebody can help, I am really stumpt on this one.
    Many thanks
    Ash

    Hi,
      you've said that you've built the installer, and are installing the serial driver, but have you installed the VISA run-time on the target machine?
    Thanks
    Sacha Emery
    National Instruments (UK)
    // it takes almost no time to rate an answer

  • Can Captivate 7's playback controls control Flash swf files?

    Hi folks,
    I have created a swf file using Adobe Flash and I have imported it as an animation slide in Captivate 7. I have turned on the playback controls to just have the play button and the progress bar. When I export the presentation, the playback controls do not work. The scrubber moves as the presentation is playing, but I can't pause the presentation. When I stop the scrubber or even move it left or right, it does not affect the presentation and it just keeps playing. Am I doing something wrong? I don't want to have to create a custom nav bar in Flash as it would just be easier to use Captivate's playback bar.

    I don't think it can be expained quickly as it can be very complicated. But...
    Select New Project/Widget in Flash and choose static widget. You need to be very adept in AS3 to actually get them to work.

  • Re-set playback controls?

    I removed the Exit and Info buttons from my "Smooth" playback
    controls by renaming the exit and info "smooth" bmps in Captivate's
    Gallery. but then the result was that the right side of the
    playback controls appeared to be "cut off"....so I modified the
    image in SnagIt and saved to "smooth-preview.bmp" in the Gallery.
    But I get the "cut off" image instead of the fixed image...
    I've tried changing the playback settings to another playback
    control, re-compiling and then changing it back to "smooth", but
    nothing works...
    Pam

    Hi Pam,
    A change in the BMP images used by playback controls will not
    normally be detected until you save the changes, then shut down and
    restart, then change to a different style, then back - you get the
    idea?
    The images that make up the playback are being kept in the CP
    file, and loaded when you open the project. So closing, then
    changing to a different control, then back again, will force a
    "reload", if you will.
    Best of luck!!

  • Zen Micro - MTP playback control functional

    I want to buy a zen micro v2 which supports MTP.
    I know that the v2 version of Zen Micro is MTP enabled player.
    Microsoft has released MTP specification 0.83, which does not have playback control functionality. Mocrosoft has said that it will release the specification for this playback control in one or two months of time.But they have released an intermediate version of this MTP which has this playback control functionality.
    A scenario to understand my question:
    When you connect Zen Micro to a car stereo system, you can not control its playback functionality from the car stereo's head unit. To be more specific you can not issue Play/Pause/Stop/Volume increase/Volume decrease commands from the car stereo's head unit.
    So please tell whether zen micro has this support? If not will it be providing this functionality in the coming months?
    please suggest me any other Zen palyers which has this functionality.
    Thanks in advance,
    Regards.

    DM, the Micro's remote control works exactly as you suggested; it's an inline remote that plugs into the headphone jack, and the headphones plug into the remote.
    Unfortunately, I think the problem is more along the lines of car audio manufacturers' willingness to design a physical interface between a car stereo and the Micro than anything in the MTP spec. Microsoft can enable this kind of control in the MTP spec all it wants to, but until manufacturers are willing to use physical interfaces other than the iPod dock connector, it's all for naught.

  • CS6.0 & CS5.5 Master Collection InDesign Font Control bar & Characters Panel not Functioning

    Hi, I am a college student and our college a year ago sent me CS5.5 Master Collection InDesign at that time the font control bar was not functioning correctly on my PC. Our class was about Adobe Illustrator so our instructor rather than deal with it had us just cut and paste things into MS Word.
    Now a year and half later I am taking a college course in Adobe Photoshop . . CS6.0 Master Collection InDesign once again the collection is the Student and Teacher Licensing for Windows.  The same thing is happening now we are REQUIRED to this semester to create a Calendar using our own photos and create a INDESIGN layout using our photos we took for our course.  In this version of CS6.0 InDesign I figured they would of fixed it by now, but the "Control Panel is still not working, nor is the Character Panel that you pull up to the side of InDesign. I am able to use the pull down menus and do things from there, but the point of taking this course was to learn the software, how can we students use the software if it is not functioning properly.
    NOTE I AM EXPERIENCEING THE SAME THING WITH ALL SIDE PANELS NOW TOO.
    Oh yes it changes the font name when you use the pull down window from the top menu, but it is not allowing us to use the CONTROL BAR just under the MENU BAR, nor the side panel I pulled up and am showing there. In ADOBE ILLUSTRATOR I can use the character panel just fine, but not in InDesign.
    In Illustrator when I go to launch it I get this error, I have done as it asked but it still is bring this up at launch. I can go in and use Illustrator just fine, except for this error.
    Someone thought I may of installed it incorrectly, so I removed all ADOBE software from my computer ran maintenance and virus scans and reinstalled the software, a whole day wasted, but it still is doing the same thing.
    a) Thinking that this is a limitation placed on the software by Adobe because it is a Student Teacher Edition?
    b) There's a problem with having OpenType and TrueType fonts on hand?
    c) Adobe has a software problem that they have yet to resolve?
    d) There is something somewhere within the software I need to flip a switch on?
    Our instructor I gather who owns his own business his works just fine on his PC, but then because it is his business software it makes me think it has to do with the Student Teacher Edition.
    I have more than enough RAM and hard drive space the Processor is a AMD A8-3800 APU with Radeon(tm) HD. Graphics is 2.40 GHz. It is a 64-bit Operating System. Oh I am using a Windows OS 7.0 Professional .
    This is the only piece of software that I have come accross that will not function correctly on my computer system since it's purchase Jan of 2012.

    There is no difference between the commercial and educattional versions of the products other than the license terms. The software itself is the same.
    Since you are on windows 7, the first question is are you using large fonts in the Windows interface? Large fonts combined with an Aero theme are deadly to ID. See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)
    If this doesn't apply, the next thing to try is replacing your preferences. See Replace Your Preferences
    Do you use a font manager? If so, which one?
    Does the account you are using have adminsitrator privileges? Shouldn't matter, but it would be worth trying a new account that does.
    It's still possible that the installation failed in some way. That Illustrator error certainly makes it look like a strong possibility, and there may have been some left-over crud from the first failed install that was not replaced the second time. If the things above don't clear up the problems, I would suggest Deactivating the suite from an applicatin that will open, and uninstalling again, then run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) which will remove all traces of the previous installations. Reboot, then before reinstalling run MSConfig and turn off all non-essential startup programs and services, especially any virus or maware scanners, third-party firewall, instant messengers, iTunes and all browser helpers and toolbars, then close MSconfig and reboot. Log in as an Administrator (the actual Adminsitrator account would be best, but it may not be turned on). When the warning comes up about diagnostic mode continue to boot (cancel MSConfig if it opens), then run the installer again. You can now run MSconfig to restore normal startup and reboot once more.

  • Premiere Pro CC Source and Program Playback Controls not working.. help please.

    Hi,
    Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
    Thank you,
    Mauro

    Dear Mark,
    Thank you for the hint/link, reseting the toolbar did the trick.
    Regards,
    Mauro

  • Animate control can not play in a callback function

    Hello,
    I'v programmed a code:
    static int panelHandle;
    static int flag = 0;
    static int picID;  
    int CVICALLBACK ProcAnimate (int panelHandle, int controlID, int event, void *callbackData, int eventData1, int eventData2);
    int main (int argc, char *argv[])
        if (InitCVIRTE (0, argv, 0) == 0)
            return -1;    /* out of memory */
        if ((panelHandle = LoadPanel (0, "testanimate.uir", PANEL)) < 0)
            return -1;
        picID = AnimateCtrl_ConvertFromPictRing(panelHandle, PANEL_PICTURERING);
        InstallCtrlCallback(panelHandle, PANEL_PICTURERING, ProcAnimate, NULL);
        DisplayPanel (panelHandle);
        RunUserInterface ();
        DiscardPanel (panelHandle);
        return 0;
    int CVICALLBACK ProcAnimate (int panelHandle, int controlID, int event,
                                                     void *callbackData, int eventData1, int eventData2)
        int res ;
        if (event == EVENT_LEFT_DOUBLE_CLICK)
            if (flag == 0)
                res = AnimateCtrl_SetAttribute(panelHandle, picID, ATTR_ANIMATE_FRAME_INTERVAL, 0.4);
                res = AnimateCtrl_SetAttribute (panelHandle, picID, ATTR_ANIMATE_ENABLED, 1);
                flag = 1;
            else
                AnimateCtrl_SetAttribute (panelHandle, picID, ATTR_ANIMATE_ENABLED, 0);    
                flag = 0;
        return 0;
    Hope double clicked the picture ring it can play animation. but I found that  the variable res got an error (-45). What is wrong?
    David

    Attached your project modified and working. The solution is to set control callback in the editori instead of using InstallCtrlCallback (it is basically one of the suggestions I already gave to you: you could have tried it and solution your problem earlier  )
    Alternatively, if you want/need to dynamically install the callback, set it before creating the animation control and the system will still be working.
    When dealing with custom controls, you must understand that almost all of them use a special callback to accomplish control function. That callback is chained to a control callbak that eventually exists, and must not be modified afterwards, otherwise control behaviour will be affected (cancelled like in your case, you could also get GPFs or other errors for more complex controls). I have it as a general rule for myself: when I need to set some attribute for controls used to generate custom controls, I set it before passing the control to instrument functions.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?
    Attachments:
    testanimate.zip ‏41 KB

  • Captivate 7 event video playback controls not working

    Hi,
    I'm using Captivate 7 and published an mp4 event video with limited playback controls (only play, pause, back, and close) on the slide, since the event video controls won't show up once published. When I publish the HTML5 video (with or without seamless tabbing) the controls are not working. When I click play the video plays and I can pause it, but when I want to continue play, the controls are not working.
    I tried only to use the skins (clear, corona, and halo) given with the event video, but then I can't pause the video at all, since the controls are not showing.
    We need the video to play in HTML5 mode for iPads and computers, but we're at a loss with the controls. The video has got to be limited to only play, pause, back, and close - no scrubbing or forwarding. Any ideas?
    Thanks,
    Nat

    I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
    Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
    Here is the skin I have used for that in the Captivate editor.
    The best way to test these outputs is from a webserver or SCORM Cloud.
    Sreekanth

  • My soundbooth not function withe error code NV_OGL. the stament: "soundbooth could not find any capable playback modules". but pc system is working. Any one can help me?

    Hi, I am SK Chew,My soundbooth is not function after few months not used and with an error code "NV_OGL" and the statement is "soundbooth could not find any capable playback modules". and my pc is working in good condition. any one can help me?

    Quicktime errors http://forums.adobe.com/message/4545437 may help
    Or, not exactly the same, but MAY be related
    ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614

  • ITunes cannot recognize touch/audio/video playback will not function

    All right, I asked apple support about this and didn't even get the dignity of a response, so here goes. My computer crashed a while ago, and when we rebooted it, this started: Whenever I plug my iPod into the computer, I get a message saying "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again." So I followed those instructions, and I still get the same result.
    A reason I think this might be happening is because I installed the iPod Touch update (not the one you have to pay for, but the one that puts that grey strip across the bottom of the home page), then the computer crashed. So maybe the update is installed on the iPod but not on iTunes? I'm not even sure how to get the update again to be honest.
    There are a number of things that we have not reinstalled yet on the computer, like our audio/video playback. Whenever iTunes is started I get this: "iTunes has detected a problem with your audio configuration. Audio/video playback may not function properly." And it doesn't--we have no sound on the computer right now. That is something I would like to change ASAP, I'm just dying to hear some new music.
    And when I say we have no sound, I mean zero sound capabilites: iTunes, Windows Media Player, even the internet, there is nothing at all.
    I really don't know much about computers, and I just didn't know where else to turn. Thanks to anyone who thinks they can help.

    Hey dbsabres06,
    Use the steps in this article: http://docs.info.apple.com/article.html?artnum=93698 to uninstall and reinstall the Apple software on the computer. The Apple Mobile Device support is the driver that allows the iPhone and iPod touch to be recognized.
    For the audio configuration issue, try the tips in this article:
    http://docs.info.apple.com/article.html?artnum=304424
    Not hearing audio from system events, or applications like windows media player might be a driver issue.
    Try running your windows updates or checking your computer manufactures website for updates.
    Jason

Maybe you are looking for