Playback loops to beginning: How to stop?

I'm working away in PP CS6 and one little thing has slowly turned into a major annoyance today:
I'm building my sequence a shot at a time, and when I play back the last cut to check it, the playback of the timeline it will sometimes loop back to the first shot of the show, so I have to stop playback and hit "end" to get my current position indicator back to the end of the timeline where it should be. It doesn't do it all the time, just sometimes, and it's driving me batsh*t crazy.
Has anybody else seen this and if so, please, for the love of all that's holy, tell me how to stop this behavior.
Chris Conlee
Mac Pro (4,1)
OS X 10.7.4
24Gb RAM
nVidia GTX 285 (CUDA 4.2.10)
Dual Monitors
Matrox Mini Max
PP 6.0.1

Chris,
It sounds that this Preference setting needs to be disabled: "Playback work area after rendering previews".
1. Premiere Pro > Preferences > General
2. Uncheck "Playback work area after rendering previews"
3. Click on OK
This is the first Preference i change beacuase of this "sometimes-jump-back-to-start-behaviour". Maybe that's the solution for you, maybe not. Try it and see if it helps.
/Roger

Similar Messages

  • How to stop while loop

    I can't figure out how to stop a while loop in my labview program. 
    When the user presses the Run arrow in the toolbar I want my program to begin reading the serial port for GPS messages.  These messages should be displayed on the front panel.  Currently I have this read/display in a while loop.  The program is also waiting for an extrenal trigger.  When that trigger arrives, I want to grab the current string from the serial port and save it and continue reading and displaying the serial/gps string.  This trigger starts the other parts of the program- signal generation, recording, and saving data which need to run concurrently with the serial/gps reading/displaying.  Once the AO and AI have finished and the data have been written to disk, I want the program to stop.  The serial/gps messages should be updating this whole time.  Only when the data are written to disk should the whole program end.  This whole sequence of events should only be done once when the user preses the Run arrow. 
    So far I'm unable to pluck the serial string when the trigger comes in if I'm watching the serial port all the time.  The program also doesn't stop when it finishes writing to disk because the read serial while loop is still running.  I don't want to use a front panel stop button.  The program should stop itself when the data havebeen written. 
    I'm really stumped on this one but I'm new to LabVIEW so I'm sure there's an easy solution to this. 
    Thanks for any and all help. 
    Attachments:
    SPoleLakeChirp.vi ‏199 KB

    Dennis and altenbach-  Thank you both for your patience. 
    I was trying to do just what Dennis suggested-"As I said, setting a local variable is one way." even before posting to this forum, but I couldn't get my local variables to reflect changes made elsewhere in the program and I wasn't able to wire from them because they were writes.  The critical part I was missing was how to change a local variable from a write to a read.  It was staring me in the face the whole time- just right click.  When I finally found it, my problems were solved. 
    altenbach- thank's for putting the figures together.  I do understand the logic and wiring there, but I was really trying to avoid stop buttons.  The program should be smart enough to figure out when to stop.  And using local variables turns out to be one way of solving this.  I still have some clean up to do, but I've included my current working version just so you can see how I implimented your suggestions.  There's still a lot of clean up to be done, but I'm delighted to be able to watch the serial/gps messages until I'm done reading in data.  At first I had this stop variable set in the final sequence frame.  That didn't work because I wasn't getting to the final frame because the loop wasn't finishing.  Once I placed the stop variable in the same frame as the while loop it began stopping when it should. 
    If you have other comments/critiques about the wiring diagram I'm earger to hear them.  I'm considering the structure finished, however.  It still needs cleaning up and commenting, but I'm satisfied with the functionality. 
    Thanks,
    Peter
    Attachments:
    SPoleLakeChirp.vi ‏210 KB

  • Stop Playback Looping During Editing

    Can't seem to find where to set the loop/don't loop option. At the end of the timeline, the playback goes to the beginning and starts playback again. I want it to stop at the end and not loop (during editing). Can you help me find the setting to stop it from continuing playback from the beginning of the clip (stop playback looping during editing).
    Premiere Elements 10
    Win7(64)

    There is no direct way to stop playback AT the last Frame.
    Does the End key not work on your computer?
    Once playback has been stopped, the PageUp and PageDn keys will take you to the first Frame of the last Clip, or to the first Frame of that last Clip. The Cursor keys will also step you, Frame-by-Frame, inside the Clip.
    Good luck,
    Hunt

  • How to stop while loop when a specified function is terminated?

    I want to make a program which has 2 thread, one of which is to control some devices, and the other is to measure outputs of the devices.
    To do that, I should make a 2 independent loops, but there comes a problem here.
    I want to terminate 2 loops at the same time, but it's difficult for me to do that, because when I try to notify upper sequence's termination to lower loop by some value change, they have some dependency.
    That's why I need your help. I want to know how to stop lower loop when the upper sequence's termination keeping their independency.
    Please let me know. Thank you.
    Attachments:
    help.JPG ‏200 KB

    Is the upper loop commanding the lower loop at all?  I would think you would have some type of communication between the loops.  Just use that communication to send a stop command.  Or the next best way is to just simply use a notifier.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • How to Stop Message Driven Beans to go into an infinite loop

    hi,
    Am kiran peddireddy, have the following problem. When i sent a chunk of 50 messages to the MessageDrivenBean, let us say 25 have passed and at the 26th message there was a problem and could not deliver. so, it throws an exception due this the MDB goes into an infinite loop. Can anyone suggest how to stop the MDB from infinite loop. I need help for this ASAP.
    thanks,
    Kiran Peddireddy.

    To Crackers,
    You have to let the container deal with the message - expire/cancel the message after a certain number of tries. This is easy to manage in the WLS console. Which version of Weblogic has this option? 7.0 or 8.1 ?
    I didnt see this option in Weblogic 7.0!!!!!!
    Corect me if I am wrong.
    Seetesh

  • How to stop  after first loop operation  over?

    Hi friends.
    How to stop  after first loop operation  over?
    I have a loop operation in module pool program.
    After first loop over I want to stop.
    I used the STOP keyword, but it is going to dump.
    Thanking you.
    Regards,
    Subash

    Hey,
    The statement STOP is forbidden in methods and, since release 6.10, leads to an uncatchable expection during the processing of screens called with CALL SCREEN...
    As they said above, use a EXIT statement to fix this DUMP...
    Regards,
    Diogo Carvalho

  • How to stop a while loop in LabVIEW from a C program

    How to stop  a while loop in LabVIEW from a C code

    hi
    I think by creating dll you can stop the while loop from your C program.For that you just create dll (Dynamic Link Library) for the VI which has that while loop.
         Anyway can u please explain ur requirement clearly.

  • How to stop a while loop after certain time using Elapsed time vi

    how to stop a while loop after certain time using Elapsed time vi.

    Hi Frankie,
    Just place the Elapsed Time VI inside the WHILE loop, and wire the 'Time Has Elapsed' output to the conditional terminal in the lower right corner (which should be set to 'stop if true' by default).
    In the future, please post your LabVIEW questions to the LabVIEW Forum.  You have a much better chance of getting your questions answered sooner, and those answers can then help others who are searching the LabVIEW forums.  Thanks!
    Justin M
    National Instruments

  • QUARANTINED MAIL - WHERE DOES IT GO?  HOW TO STOP ENDLESS LOOP?

    A server has received a "phishing" message that was caught by the spam filter.
    The user is now getting continuous messages advising them of this fact, which seem to be in some kind of "endless loop". The messages say:
    Our internal reference code for this message is 06888-08.
    The message has been quarantined as:
    [email protected]
    Where is this "quarantined" message at and how can it be accessed?
    How to stop the "endless loop" of these messages?

    how viruses and spam are quarantined is defined along with many other settings you may want to customize in /etc/amavisd.com
    You can clear your qurantine directory with:
    sudo rm -rf /var/virusmails/*
    If you don't want spam & virused quarantined to this directory, locate the following line in /etc/amavisd.conf and insert a # sign in front of it:
    $QUARANTINEDIR = '/var/virusmails';
    change to:
    #$QUARANTINEDIR = '/var/virusmails';
    stop/start mail service for you change to take effect.
    Jeff

  • Workflow infinite loop how to Stop?

    hi,
    My workflow is having a loop it runs infinite bcos the condition is not proper. Inside the loop i have a send mail step.. How to stop the Running workflow???
    Regards
    Roops

    Roop,
    It seems that the loop condition is a workflow step and not something in the method code.
    For active instances of this workflow you will have to manually intervene. There can be 2 options -
    1. Open the workflow log and change the container values such that it comes out of the condition
    2. Logically delete the workflow.
    Hope this helps

  • How to stop a "continue if true loop" inside a "stop if true loop"?

    Hello guys, I have "continue if true loop" that I want to stop when I press the stop button of the surrounding "stop if true loop".
    Notice that I ran through all of this to keep the push button released and keep the LED lit.
    However, when I press the stop button nothing happens, so:
    1) How can I overcome that?
    2) Are the shift registers even necessary?
    (Please fix my VI)
    T. A.
    Attachments:
    prob.vi ‏7 KB

    Your code makes no sense. Why don't you study it with execution highlighting while operating the controls.
    What is the purpose of the shift registers? none! Delete them. Why did you place them?
    If you want LabVIEW to react to a button, the control terminal should be in the innermost loop. Currently, the code cannot escape from the innermost loop, because the value of the termination condition cannot change. It will spin millions of times per second doing nothing useful.
    There are many ways to keep an LED lit after a latch action switch, e.g. with an event structure. (see attached. Make sure to stop the VI with the stop button, else the LED remains lit.). Of course the code is pretty dumb, because you can never turn the LED off again while the VI is running.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    probMOD.vi ‏8 KB

  • How to stop voice control

    how to stop voice control?

    Hi Joannewpark,
    Press your Home Button to get to the Home Screen.
    Press Settings, then press again 2x fast - you will go to the Settings screen
    Press on General, then press again 2x fast - you will go to the General screen
    Use 2 fingers to indicate scroll up - Voice Over will begin to read the items on the screen, and will eventually get to the Accessibility option. When it says "Accessibility" press on it, then press on it 2x fast
    It will go to the Accessibility screen, tap on the Voice Over option one, and then again 2x fast, now tap on the Voice Over option again, and then double tap to turn it off.
    Cheers,
    GB

  • How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

    As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save.  I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was.  I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink."  That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box.  But as soon as I save (command S), the text box reverts to a hyperlink. 
    If I don't click save and move around the pages, it does not revert to a hyperlink.  It only reverts to a hyperlink when the file is saved.  Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
    The website page is: http://www.usronline.net/USR/VedicResearch.html.  If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file.  This should not be, but I can't get this hyperlink to go away for good.
    Many thanks in advance.
    Vishnupriya

    Please pardon the reply delay--a big project deadline had to be met.  Now back to this work:
    Yes, the text in the oval object had a drop shadow (the oval object itself did not).  I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object.  I deleted the text and then the image file icon disappeared.  But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again.  I deleted the oval object entirely and simply typed the text inside the main text box itself.  The image file icon that was attached to that oval object is gone (along with the oval object).
    Still the image file icon is attached to the main text box, though.  I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink. 
    Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one).  Still in the new text box with the pasted text, the image file icon shows in the upper right corner. 
    I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
    I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
    The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond."  I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
    If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
    Thank you.

  • When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

    when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

    It could be that the CD player will only playback "Redbook" CD's from the previous position.
    And starts mp3 type CD's from the beginnig.
    However.. it's not Logic related.
    pancenter-

Maybe you are looking for