Playlist not readable easily

Playlist icons are too big whereas font used below the icons is too small, so much so, that it is just impossible for elderly people to read the same without glasses.

I had the same problem and resolved as follows:
- In the iTunes app Store menu, choose Sign Out. This action, in addition of signing off the Store, turns off iTunes Match, in the same menu.
- Go back to the Store menu and choose Sign In.
- In the Store menu, chose Turn On iTunes Match
Then matching process begins and iCloud recognizes the previous matches and uploads the remaining songs. Including the previously rejected songs.
Hope this helps.

Similar Messages

  • I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

    I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • External Hard drive "not readable", does not show up in Disk Warrior either. Help me, please!

    I have a 500gb G Drive Slim that is almost brand new. I accidentally pulled the cord out when it was connected, and now when I try to open it, it says "not readable by this computer." This is what I see when I go into disc utility:
    I called G Drive, and they told me to download Disk Warrior 4. I did, and this is what I see when I open it:
    My hard drive doesn't show up...i'm not sure if i'm doing something wrong but I just paid $100 dollars for this and I'd really like some help. I read the manual and it wasn't helpful at all.
    Please help me!

    Make sure it's format is Mac OS Extended (Journeled).
    To check it's format, plug in the External HDD and search Disk Utility in the spotlight. Click the External HDD and go to the Partition tab. If it isn't Mac OS Extended change it and format it.
    You shouldn't need any of these external applications to use it. I have one and use it like a flash drive.

  • External Seagate drive suddenly "not readable" by iMac

    I'm having a problem with a Seagate Backup Plus external desktop hard drive.
    It was working fine, but then I restarted my computer and got a window with the error message:  "The disk you inserted was not readable by this computer." and options to Initialize…, Ignore, or Eject.
    I rebooted my computer a few times, and each time I get the same error message.  When I open Disk Utility, I see the hard drive listed in the side bar, but it is not mounted and will not mount.  Each time it is labeled something like "disk2s2," "disk10s2" or "disk6s2," etc.  That changes slightly each time like that, but seems to always begin with "disk" and end with "s2."
    I ran repair disk and got the following result:
    The drive is about three months old.  I think it did something like this when I first bought it (I remember seeing the "disk2s2" label in the Disk Utility sidebar), but restarting solved it then.  Now it seems to keep happening every time I restart.
    I would really appreciate any help or information any of you can provide.

    External hard drive spontaneously unmounted? Try these tips:
    NEW FIRMWARE: Try updating your external hard drive's firmware, which is available from your drive manufacturers Web site--or just use VersionTracker's (www.versiontracker.com) search function to find it. Be sure to back up your data before applying the update, and carefully follow the manufacturers instructions.
    OUT OF iSIGHT: If you're using an iSight camera while you're using a FireWire drive, the camera may be interfering with the drive's ability to stay mounted. Try temporarily disconnecting your iSight and moving it to a separate FireWire port. If you have multiple FireWire devices, try using a FireWire hub.
    POWER PROBLEM: A faulty power adapter could be causing your drive to unmount. Your drive may not be getting enough juice to stay on, causing the drive to turn off and thereby unmounting it from your Mac. Alternately, the power adapter may not be providing a steady amount of power, causing your drive to turn on and off. Try replacing the adapter. If you can't get a replacement adapter from the hard drive manufacturer, try your local electronics store. Just make sure the adapter you choose has the same connector and input/output voltage. you can find the input/output voltage on the adapter itself.
    Cheers!
    DALE

  • The UI text of the menus are not readable so it's impossible to work with

    Hi
     I install the photoshop cs6(x64) and i have the following problem. The UI text of the menus(not the toolbar drop down menus) are not readable so it's impossible to work with. After that, I completely uninstall the cs6 photoshop and i tried to install photoshop cc(x64)-with clean install- but the problem still exist.
    Also I tried to change display settings from 1600x900(recommened)but the problem still exist...I send you some photos of the menus to understand better what I mean.Any suggestions? Specifications
    Toshiba Satellite L775-15NWin 7 Home Premium SP1 x64
    Intel Core i5-2430M 2.4GHz
    Ram 8gb
    Monitor 17"
    Geforce GT 525M

    Right click on your desktop and choose Properties, then choose Window Color, Advanced Appearance settings...
    Click on the Message Text to look at your Message Box item settings.  Is the font Segoe UI, 9 point, color black?
    Also, in Photoshop, check your Edit - Preferences - Interface menu.  What is your UI Font Size there?  Try changing it to something else, closing and restarting Photoshop, then changing it back.
    Lastly, you could try resetting your Photoshop preferences to defaults.  Press and hold Command - Shift - Option simultaneously (or Control - Shift - Alt if on a PC) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
    -Noel

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • How do i redeem an itunes giftcard code if the code is not readable?

    how do i redeem an itunes giftcard code if the code is not readable when scratched off??

    Yes, i scratched it and some of the numbers came off with it. is the card no good now?

  • How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

    I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • I am getting the message "the disc you inserted was not readable by this computer" when I plug in a verizon air card into my macbook air.  It also does not show up as a device on my desktop.  However, I select "ignore" and am still able to connect.

    Whenever I insert my verizon air card into my MBA, I get the message "the disc you inserted was not readable by the computer", with the option to either ignore or eject.  I select ignore, and am able to connect to the internet, but don't know why this happens.  Also, the air card is not showing up as a peripheral on my desk top.  Any ideas why this might be happening and how to fix it?

    When I unplugged (power) and plugged in again to restart it, yes, I heard it spin and click. Not since then though. I assumed it went to sleep and since the computers don't recognize it they won't wake it.
    If I need to replace it can the data on it be recovered?

  • How can i organise my tunes in order of ***most recently added to playlist***. Playlist, NOT library!

    Hi everyone,
    this is my first ever post on a dicusion board so lets see...
    i would like to know how to, if it is possible... to organise my songs of a playlist to show my most recently added songs (to my playlist, not library) at the top and so on.
    all of my music has been on the mac for a while so it orders is on date added to LIRBRARY and not when i added it to my playlist.
    i want to see my recently added songs of my playlist first.
    is this possible and if so can someone help me please!
    Thanks
    Mez

    Hi Mez,
    Are you talking about a regular playlist, not a smart playlist?
    If you drag a song to playlist to add it, the song will be added at the end of the list.
    So to reverse the order and have the most recently added song first, just select the playlist and display it in list view. Click the triangle in the header row of the leftmost column showing the numbers and revert the play order.
    have fun
    Leonie

  • If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

    Question
    If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
    Screen 2/3 blanco on the left side
    With F11 all OK.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Unable to read usb memory stick + "the disk you inserted was not readable by this computer"

    Hi Everyone,
      Today I was tryign to use a brand new memory stick 8GB-Samsung PNY on my Mac Book Pro. (Mac OSX 10.7.5)
      1. I do not see this drive in the Finder.
       2. Diskutil could detect the drive.
       3. I was trying to put ubuntu image file on the drive from the terminal uitility and I have this error message in a dialog box:
          "the disk you inserted was not readable by this computer"
    4. Clicking on initialize helps me realise that the drive is detected. But I do not have a clue on how to proceed from here. I am new to Mac and its file system formats.
    The same issue happened with my 500GB external Western Digital Hard Drive. I was reading on forums that WD got some issues with Apple is trying to resolve. I expected to not have this road-block with another brand but it happened with my memory stick. Now I was forming an impression that something should be done to external storage devices inorder for me to use them Mac OSX.
    Kindly enlighten me and help overcome this issue.
    Thank You

    Thank You OGELTHORPE.
    I erased the memory stick and formatted to "Mac OS Extended(Journaled)".
    I attempted once again to use the "sudo dd" command from termial trying to copy the Ubuntu image file to the memory stick.
    The operation termainates with the same message
          "the disk you inserted was not readable by this computer"
    The termainal message says some bytes got transffered in so many seconds. It looks like this operation is being terminated in the middle.
    Have any suggestions and work arounds?

  • My Sandisk cruzer thumb drive 4.0GB (which is very old, roughly 10 years and I'm not sure about the model) reads "The disk you inserted was not readable by this computer" when inserted in my Macbook pro 2010. How do I get it to work?

    My Macbook Pro 2010 with the latest OS does not open a particular Sandisk Cruzer 4.0GB (which is an old model, about 10 years) thumbdrive with the message "The disk you inserted was not readable by this computer". Will I be able to read it on my macbook?

    Is it readable in a Windows computer?  If not then you can try Disk Utility to repair the drive-- although that may be dangerous too.
    I haven't had this problem so I out of safe ideas.  There are ustilies out there.   I used the seach term "repair flash drive Mac OS X" to locate some of these.
    If the data is essential there are pay-for services to recover data looked the price was in the range $50 - $1000
    All the best.

  • I only want to apply iMatch/iCloud to one of my iTunes playlists, not my entire library. Is that possible?

    I only want to apply iMatch/iCloud to one of my iTunes playlists, not my entire library. Is that possible?

    Hello efisch81,
    As far as I know, this is not currently possible. It matches the entire library or none of it. For specific playlist syncing, you'll still need to sync traditionally through iTunes for now.

  • Whenever I plugged in HP laserjet M1132 printer usb to my Macbook air,a screen pop-out "the disk inserted are not readable by this computer".I uninstalled

    Hi,I'm new here and I think my problem were discussed few times before.However,I tried to follow the solutions similiar to my condition but it does not work.My problem is whenever I plugged in the HP printer (Laserjet M1132 MFP) usb to my Macbook Air,a screen will pop-out and read as 'the disk inserted is not readable by this computer'.I even bought my Mac to the Mac store but the situation remains the same.Okay with other printer but not with my HP.Sigh.The HP printer worked just fine with other computers (not Mac).I'm really sick of it.Please help me.I once plugged in an external hard drive & started Time Machine with it.The printer problem started after that.However, the hard drive plug-in works just fine.
    Your attention of above matter is highly appreciated.Thank you.

    Here is what worked for me:
    I reset the System Management Controller on my MBA.  To do so requires shutting it down, keeping it plugged in to power (I also unplugged both USB connections), and then from a powered off state I simultaneously pressed Shift + Ctl + Option + Power (I did this once and it did not work so I tried again and did it 3 times just to be safe), then released them at once, then I pressed the power button.  Problem solved.
    http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
    I also tried uninstalling the using the repair Disk Permissions with Disk Utility and moved the HP Printer software accessories to the trash (you can search the web for how to do that but that did not solve the problem either).  Neither of these options worked.

Maybe you are looking for