Playlist sorting and Burning issues

I don't know how to tell the community that I solved my problem.  I hope this is the way:
I retitled each song to be put into a playlist by adding "A" in front of the title the first song, a "B" in front of the second.   etc.
That solved the problem.
Thanks, Community.
7jeep7

Hi,
I am having kind of a similar problem...I created the movie in Final Cut Pro and transfered it to Compressor...first it wouldn't recognize it and I had to send it to motion and then to compressor...now when I go to Compressor to select the Target with settings, under Apple or custom nothing specific comes under MPEG-2 just "ALL" is selectable. When we select "all" nothing happens and when we try submitting, it gives an error that you have not specified the Target and Destination..I am so confused...please help....

Similar Messages

  • Let's all contact Apple about CD imports and burning issues

    While reading through the posts here, it appears that there are alot of us with issues dealing with iTunes and CD imports and CD burning. Even using Quicktime 7.1.3, I still cannot even play a CD track. I can use other applications to import music, but the bottom line is that iTunes should let us import CD tracks. It doesn't. If you are having problems with these slow CD imports, or CD burning with iTunes 7, then we all need to contact Apple. I suggest that instead of trying to find a workaround, lets all get Apple to correct their iTunes application. When you open iTunes, click on iTunes in the toolbar across the top of your monitor and scroll down to the line "Provide iTunes feedback" Fill out the questions and describe exactly what CD import/burning issues that you are having. We will not hear back from Apple individualy, but if we all start letting them know directly that there is an issue, maybe they will get the message and fix these problems. We all appear to be passionate about Apple and iTunes. Lets get these problems resolved. Okay?

    I am having no problems. I did with my Ti667 when the optical drive died.
    I am onto the latest version of iTunes and can report no problems for me.
    Oppp......... my iTS country changes and I changed back and my account is in good order.
    MJ

  • Sorting and grouping issue in WDP-ALV table

       lr_field->if_salv_wd_sort~create_sort_rule(
              EXPORTING
                sort_order        = if_salv_wd_c_sort=>sort_order_ascending
                group_aggregation = abap_true ).
    And while binding data, I'm sorting the internal table having data as below
    SORT wd_assist->gt_details_table(itab) BY bproc bsubproc function field ASCENDING.And output is as follows
    In the above snapshot, The sorting is getting disturbed on colunm: Function......
    But required output should be as below
    Pls help me how to achieve this?
    Thanks
    Katrice

    Hi Sandesh,
    When we use the SALV_WD_TABLE component to display ALV, by default, all columns are arranged in the same order as the attributes in the context node of your
    application.
    You need to add the following code in the wddomodifyview( ) method of your View.
    METHOD wddomodifyview
    data:lt_columns type salv_wd_t_column_ref,
            ls_column  type salv_wd_s_column_ref,
            lo_column  type ref to cl_salv_wd_column ,
            lo_ref_cmp_usage  type ref to if_wd_component_usage,
           lo_ref_interfacecontroller type ref to iwci_salv_wd_table ,
           lo_value type ref to cl_salv_wd_config_table.
    * Get  reference to the Component usage of the ALV.
    lo_ref_cmp_usage = wd_this->wd_cpuse_alv( ).
    IF lo_ref_cmp_usage->has_active_component( ) IS INITIAL.
    lo_ref_cmp_usage->create_component( ).
    ENDIF.
    * Get reference to the Interface controller of the ALV.
    lo_ref_interfacecontroller= wd_this->wd_cpifc_alv( ).
    lo_value = lo_ref_interfacecontroller->get_model( ).
    * Get the Columns of the ALV
    CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
      RECEIVING
    value = lt_columns.
    * Get reference to each column and set the column position
    LOOP AT lt_columns INTO ls_column.
    lo_column = ls_column-r_column.
    CASE ls_column-id.
    WHEN 'VBELN'.
    lo_column->set_position('1').
    WHEN 'MATKL'.
    lo_column->set_position('2').
    WHEN 'POSNR'.
    lo_column->set_position('3').
    WHEN 'MATNR'.
    lo_column->set_position('4').
    ENDCASE.
    ENDLOOP.
    ENDMETHOD.
    Hope this helps you to resolve your issue.
    Thanks
    KH

  • Itunes 7 and burning issues - Please help!

    Hello!
    I upgraded to itunes 7 yesterday and now I can't burn CDs. When I insert the CD it says checking media, the CD light flashes, then it does nothing. The panel at the top goes back to the apple logo?
    Any idea what I should do? I tried emailing apple, but none of their suggestions were relevant.
    HELP!!!!!!!

    My diagnostic says this:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    TriGem Computer, Inc. Cupertino
    iTunes 7.3.2.6
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON 7000 / RADEON VE Family (Microsoft Corporation)
    NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
    Connected Device Information:
    Disk drive, SAMSUNG SV4002H, Bus Type ATA, Bus Address [0,0]
    CD-ROM Drive, SAMSUNG CD-R/RW SW-224B, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, SAMSUNG DVD-ROM SD-616T, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: SAMSUNG DVD-ROM SD-616T, Rev F300
    Audio CD in drive.
    Found 22 songs on CD, playing time 78:03 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:37:22
    Track 3, start time 07:04:40
    Track 4, start time 10:54:17
    Track 5, start time 14:00:37
    Track 6, start time 17:53:12
    Track 7, start time 21:49:05
    Track 8, start time 25:33:60
    Track 9, start time 29:22:72
    Track 10, start time 33:02:25
    Track 11, start time 36:10:65
    Track 12, start time 40:13:52
    Track 13, start time 43:33:12
    Track 14, start time 47:09:45
    Track 15, start time 50:19:45
    Track 16, start time 53:58:40
    Track 17, start time 57:52:02
    Track 18, start time 61:05:65
    Track 19, start time 64:49:47
    Track 20, start time 67:57:55
    Track 21, start time 71:30:22
    Track 22, start time 74:29:50
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: SAMSUNG CD-R/RW SW-224B, Rev R201
    Drive is empty.

  • New iMac 3.06 DVD slow and burning issues

    I just unpacked my new iMac 3.06 GHz and upgraded to 10.6.2, first thing I noticed: starting time was slower than my 2.66 GHz "old" iMac, I tried to burn a DVD, same speed 8x and it took twice time or more than my "old" iMac,
    Is there an upgrade coming?
    Thank you

    Hopefully an upgrade will fix those little problems,

  • ITunes 10.6.3 keeps generating incomplete downloads AND it rearranges the order of the playlist when I burn a playlist to an mp3 cd

    iTunes 10.6.3 keeps generating incomplete downloads AND it rearranges the order of the playlist when I burn a playlist to an mp3 cd.
    I purchased an album on iTues from my MAC book Pro & the song downloads were incomplete. The song length shows correctly in the column, but they cut off between 1/4 & 1/2 way through the songs. Now, I dwonloaded it on my iPhone 4 through my itunes account after the purchase & the songs play fine. This happened with the very next song I purchased, as well.
    I got around this issue, then created mp3 versions of all the songs, put them in their own playlist, then "Burned an mp3 disc." When it completed, the songs were in a different order.
    Are there any fixes for either of these problems/bugs?

    iTunes: How to set the play order of songs on an MP3 CD - http://support.apple.com/kb/HT2455

  • Smart playlist sort order issue

    I'm having an issue sorting a smart playlist. I've searched through other questions on here but can't find the identical issue.
    I've created a smart playlist that contains the contents of two other smart playlists. I've tried to sort this list by 'name', by clicking on the arrow in the column heading, but the list still leaves the two playlists separately, ie. it sorts each original playlist separately, and then puts one after the other in the play order.
    I have other smart playlists constucted in the same way, and have no issues with them, and I can't see what the difference is with this one!
    I'm using 11.0.4.4, on a Windows 7 PC.

    I am also having the same problem. Running the newest iTunes and iPhone software my smart playlists are not working correctly. My "Recently Added" is correct in iTunes, and if I look at the playlist on my iPhone info in iTunes it is correct there, but the actual playlist on my iPhone is populated entirely with audiobook files. I have tried deleting and recreating the playlist which gives the same results. I have also specified that items within the playlist should be music files only and still get the same results.
    I have a playlist that's Top 50 Most Played that's also not behaving properly (ie correct in iTunes but not on my iPhone).
    Any suggestions?

  • TS1436 I cannot burn playlist because it says registry settings used by the itunes drivers for importing and burning cd''s and dvd's are missing. How do I fix this. i am running windows xp

    My Itunes will not let me burn a cd from a playlist because it says the registry settings used by the Itunes driver for importing and burning cd's and dvd'd are missing. It says to reinstall itunes. I have done that and I still cannot burn a playlist to cd's I get the same answer. How do I fix this?

    Hello Duneman51,
    Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes.  I recommend reviewing the following article for steps to troubleshoot and resolve this issue:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • MacBook Pro Health and safety issue: Potential Burn during normal use

    Hi,
    I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
    I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
    MacBook Pro 17"
    Machine Model: MacBookPro1,2
    CPU Type: Intel Core Duo
    Number Of Cores: 2
    CPU Speed: 2.16 GHz
    L2 Cache (shared): 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP12.0061.B00
    Serial Number: ()
    SMC Version: 1.5f10
    Sudden Motion Sensor:
    State: Enabled
    I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
    Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
    I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
    I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
    I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
    A slightly crisp, but loyal, MacBook Pro user.
    Mike Doherty
    MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal use

    Mike... I do sympathize with your situation but let me correct you:
    I recently experienced a 3rd degree burn using my
    MacBook Pro
    Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
    I had my laptop on my lap. I was wearing shorts. It
    noticed that it was warm on my leg where the left
    side of the MacBook Pro was touching my leg, but it
    didn't create a reflex pain response.
    Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
    Upon completing my session, when I closed the machine
    and put it away, I noticed a 1 inch x .75 inch
    blister on my leg where it had been touching the
    MacBook/Pro; and it has turn out to be a significant
    burn.
    You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
    I checked all the documentaiton that came with my
    MacBook Pro and there was no warning about the
    potential of this situation.
    Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
    To confirm this, apple has also information online:
    http://docs.info.apple.com/article.html?artnum=30612
    I recommend that Apple let owners know, perhaps
    through an email or a popup when they visit the Apple
    site.
    They do... link above.
    Lastly, when I encountered this issue, I wasn't
    running any high performance, compute bound
    applications. It was email. So, I have to believe
    that it is possible to detect wait states within the
    processes running and take the processors to a low
    power mode of operation when they are not performing
    actual work. Am I out in left field here?
    No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
    I want Apple to be successful. I haven't heard of a
    similar complaint on any of the high performance PC's
    at work. Beyond a Health and Safety issue, this is
    also a reputation issue. Better to face into the
    storm and honestly deal with this issue.
    It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
    A slightly crisp, but loyal, MacBook Pro user.
    Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
    Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care

  • Moving music to a new PC missing playlists and burned music

    My playlists and burned songs did not move from iPod to iTunes library when I moved to a new PC - just my purchased music came over. Is there a way to get those songs or do I have to start over...

    Depending on the ipod, this is the way it works.
    You need to move the music from you old computer to your new one first.
    You can use home share, your backup copy, cds, dvds, etc.

  • How do I get iTunes to show up so I can make playlists and burn CD's as I was able to do in MAC OS X Snow Leopard?  I upgraded to MAVERICKS so that I could have iCloud capabilities.

    How do I get iTunes to show up so I can make playlists and burn CD's as I was able to do in MAC OS X Snow Leopard?  I upgraded to MAVERICKS so that I could have iCloud capabilities.

    Hi ...
    Help here >  iTunes 11 for Mac: Create a playlist

  • Playlist sorting issue?

    My songs won't match the order they are put in on itunes when a sorting choice is reversed..... why? This used to work before.
    Here are the details:
    If I set a playlist to sort by title, it works when it is on A at the top. But if I click title again, so that the list is now setup so that A is at the bottom, it won't sync correctly. Same thing is true with other ways of sorting the playlists. I click on Date Added so that the oldest songs added are on the top, sync, and it works/syncs correctly on my ipod, but then when i click Date Added again so that the most recently added songs are at the top, sync, and it doesn't work (oldest songs are still at top when I want the newest added ones....).

    Sort it the way you want, then right-click on the playlist name and click Copy to Play Order.
    tt2

  • Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

    Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

    iPhone, iPad, or iPod touch not appearing in iTunes

  • Issues reading and burning with superdrive (mac pro 1.1)

    I am starting to experience a very annoying issue: the superdrive in my mac pro started to get bonk; not reading dvd that i burned some time ago with nero on pc; then it started to cause issues while burning with any software (finder, disk utility, toast on mac, and also nero and clonecd using parallels and bootcamp.
    The drive in my machine is a IDE Optiarc AD-7170A (that should be either a NEC or a Sony; but either firmware is not recognized by the drive)
    The media that i am using are MEmorex -R and DL +R; both of them were working just fine earlier ( i do not burn anything since 6-7 months ago).
    Now this is what happens: I get errors while burning, but not while doing the simulation; the error appear at any speed (tried 2X and up); and i tried with ISO images, DMG, just dragging stuff from my desktop and the result is the same: no writing and error message right after the lead-in (i assume; since it stays on lead-in on toaster).
    Using bootcamp and vista, with Nero; I get a calibration error; and if i use the built in feature to burn data in vista, i get an error too.
    Now; I would give a shot to another brand of media (verbatim? TDK?); but the fact that i cannot burn anything in any OS with any software would be a clear sign that something is wrong either on the drive or on the firmware; hence my request of help to anyone that experienced this issue
    - i cannot update the firmware (that i see as 1.N8); tried to go on the sony and nec sites and download their windows utility but no luck....the drive is not recognized; so i wonder if Apple has no way to let us update a firmware, what is the point of buying a superdrive instead of a normal dvd burner?
    - if my drive is broken....can i buy any dvd-rw drive and stick it in my mac pro?
    thanks for the help!

    Thanks for the suggestion; I've installed a new dvd drive and now seems that everything is working fine!
    I've also cleaned the old drive, taking it apart, and now at least i can use it as spare to read and burn in case that the new one would not work.

  • Install issue with CD drives / and burning

    I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.

    You may need the CD Configuration folder too, after you install the drivers.
    Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
    http://stahlhammer89.com/apple/CD_Configuration.zip
    I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
    Hope this helps you

Maybe you are looking for