Please, advise mouse-over instant word by word translation for FF9

in older version of FF I had INSTANT mouse-over the word Google translation add-on, which is not available at FF9 version. It is a huge inconvenience for me (and sure many others) , please advise which add-on has such option? I searched for one for a few weeks, and only found some with "highlight the word" (selection) option , which is quite disturbing and takes more time and does not always works when it's needed. PLEASE, advise if I can some how use google add-on again. Best regards,
Iri

Not sure how you ended up here. This is the discussion area for the iBook G4.
You want to post your question in the Intel iMac discussion area.

Similar Messages

Could Adobe please advise if they will be adding tethering support for Nikon D600

Could Adobe please advise if they will be adding tethering support for Nikon D600 as it is instrumental to our decison regarding purchase.
Many thanks

ssprengel wrote:
Nobody is happy with the answer about old software not getting updated with new cameras, but if you look into it, Adobe had to lay off about half their employees over the past few years to keep the company viable in the declining economy, so they don’t have extra people to update and test plug-ins for non-current versions, and if they did, then some people wouldn’t buy the newer version and they’d have even less money.
Adobe has only just gotten the D600 supported for raw format in their current beta version of LR, which affects everyone with a D600, and if they had to wait for Nikon for supply and SDK and also have to prioritize their work to keep things on schedule, tethering is likely to lag behind raw-file support for any particular camera. Apple controls their entire computer environment, hardware and software, so it’s not surprising they can implement tethered capture from day one, but Adobe must figure things out for OSes they don’t own, both Mac and PC, so they rely on waiting for Nikon to do things for them, and then figuring out how to get it to work.
Well boo hoo for Adobe ... life sure is tough for them ... if they can't handle the load maybe they should get out of the business of software development ... They can't be all that worried about revenue to support Lightroom development or they wouldn't have reduced the price of the full version by 50% and the upgrade price by 20% ... it was a less than smart move considering they have been bragging for the past couple of years about how many more folks use Lightroom vs. other competitive options ...
Aperture 3, Capture One both have tether support for the D600 ... and many more cameras than are supported by Lightroom ... those developers are working and engineering solutions in the very same economy as Adobe (and C1 supports both platforms as well, costs much more than Lr and employs far fewer engineers) ... why aren't they suffering from the same lack of support? ... or using the camera makers to deflect blame for the lack of results?
Excuses are not solutions ...

Hello, Can you please advise me as to the recommended system requirements for Adobe CC for Photoshop, Illustrator, InDesign, and Dreamweaver (all 4 programs). I'm hoping this is summarized somewhere rather than making me look up and compare all four. I'l

Hello,
Can you please advise me as to the recommended system requirements for Adobe CC for Photoshop, Illustrator, InDesign, and Dreamweaver (all 4 programs). I'm hoping this is summarized somewhere rather than making me look up and compare all four. I'll be using a windows based PC, and will need a graphics card that can support at least two monitors.

Hi julir
check this System requirements | Photoshop
why photoshop demand?cause photoshop having 3D feature, it mean need high spec,,so if you can run photoshop cc to run ai,indd and dw is posibilty
regards
Deto

Please advise a novice computer artist on system requirements for large files in PS ?

I am researching my next computer.
I am an artist currently using CS2 to rework my paintings into prints.
http://s719.photobucket.com/albums/ww198/blueridernz/Rachel%20Thompson%20Portfolio/?albumv iew=slideshow
The paintings have been scanned at a high resolution and are 500MB.
The image files I work with are large but the process simple, I am extracting and collaging.
Nothing too technical here.
As I will be printing large, 9' x 4', the end result file could be 2GB which I understand is the limit for PSD files.
I am not gaming or editing video files, just working with large images.
From what I have read I believe I need
i7 Core
12 GB RAM set of 3
GeForce GTX 460
Any advice truly appreciated,
Rachel.

The graphics card is perhaps a bit of overkill, if you really just paint and touchup in PS. A less power hungry and cheaper model would do just fine. The rest should do just fine, but keep in mind that all this is not going to do much good if you don't get a 64bit operating system and possibly also upgrade to CS5 to make use of all these resources. You might not even be able to install CS2 under Windows 7...
Mylenium

No mouse over descriptions pse7

Installed pse7 after uninsalling pse3. Is there a setting so when I place the cursor over the symbols on the left side, it gives adescription of what it is? i.e. when I place the mouse over spot healing the word "spot healing" be made to appear.
Also, when I'm using ereaser, in pse3, when I outlined what I wanted in to do, it would complete the ereasing after releasing the mouse button. Now, in pse7, it leaves a gray splotch of whatever size outline I made. Is there some sort of preference or setting I need to change?
thanks.
Markie

For your gray splotch, is gray in your background color square? If so, the problem is that you are erasing on a background layer. Background layers can't be transparent, so instead you get the background color. Double click the layer in the layers palette to turn it to a regular layer and erasing should give you transparency (if you use the background or magic erasers, they do this automatically. The regular eraser doesn't.)

Problem w Plug-in Check page: the "Update" button for my outdated version of the WMP plugin does not do anything, and no link is indicated in the status bar when I mouse over the button.

In Firefox, I select Tools > Add-ons > Find Updates. The Plugin Check page comes up in the browser. The entry for the WMP Plugin indicates it is out of date. I click on the "Update" button and nothing happens. When I mouse over the button, no link is indicated in the status bar (it continues to read "Done").
The entries for the other plugins indicate they are current. When I mouse over the "Up to date" button for each of those entries, a link is indicated in the status bar.
I am running Windows XP SP2 on a 2005 Dell Inspiron 6000 (1.6 GHz Pentium M processor, 590 MHz bus, 504 MB RAM). I have Norton Internet Security 2010 installed and running.

See:
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://windows.microsoft.com/en-US/windows/downloads/windows-media-player (see Firefox)
* http://port25.technet.com/pages/windows-media-player-firefox-plugin-download.aspx

Mouse-Over/Click to change content of Text/Images

Hey,
In the past i have seen website which have the ability for the user to select from images of news stories which would then change the content of the main frame depending on which one was moused over/clicked. I've checked for any way to do this outside of doing it with flash and embedding it and come up with nothing.
Any suggestions or methods for doing this?
Thanks.

You could use the behavior "set text of layer"

I'm running 10.6.8 on my MAC and it cannot be updated. I'm using LR 4 and PS 4 or CS 5.1. I recently purchased a Canon 6D and now I can't access my RAW files. Please advise.

I'm running 10.6.8 on my MAC and it cannot be updated. I'm using LR 4 and PS 4 or CS 5.1. I recently purchased a Canon 6D and now I can't access my RAW files. Please advise.

You want the 8.3 dng converter for mac os x 10.6.8
(newer versions won't work on snow leopard)
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use
Camera Raw: How to use Adobe DNG Converter - YouTube

I am attempting to update a page onmy website and the dialog box asks for a password for "50.63.96.1 I have no password and never needed one before. Please advise. Thanks, Regina

I am attempting to update a page onmy website and the dialog box asks for a password for "50.63.96.1 I have no password and never needed one before. Please advise. Thanks, Regina

That would be the password for your FTP server. You can only get this from your web hosting company. You should contact your web hosting company and ask them for your FTP Publishing details.
Then select your web site name at the top of the list of web pages in iWeb. You'll see input fieldd for your FTP details. Enter what you get from your web hosting provider in those fields.

HT1688 Cannot connect to WiFi on my iOS7 devices. It shows connection to the WiFi router but does not connect to anything online. All other non-iOS7 devices are working fine. Please advise.

I am unable to connect to WiFi on my iOS7 devices. I have an iPhone 5 and a iPad. The WiFi symbol shows connection to my wireless router but no internet connection is received. My other non-iOS7 devices are connecting without any problems. I have tried resetting network settings on both devices and rebooting my router with no luck.
Please advise.

Hello dlove103
Check out the article below for troubleshooting issue connecting to Wi-FI on your iOS device.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I'm in itunes and it is now allowing me to delete unwanted tracks. Please advise???

I'm in itunes with my iPhone 3GS and it is not allowing me to delete unwanted tracks. Please advise???

What is the setting for the Print Products Store in the iPhoto Prefrences > Advanced Panel?
Make sure, it is set to Australia:

On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

Sirs,
The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
Can you make them stop, or at least explain how it is that anyone can do this without our permission.
We have never allowed advertisement on our website and don’t plan on starting now.
I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
I would appreciate any expediency in the return of an answer that you can provide.
Kindest Regards,
Dave Broeker
VDHA Life Member #1797
VDHA Webmaster & BX Manager
http://vdha.us

The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

If you are using Lion:
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word. So far, after many tries, I get soe type of error and the conversion fails. Please advise?

I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word. So far, after many tries, I get soe type of error and the conversion fails. Please advise?

Hi there,
It sounds like there may be an issue with the quality of the PDF. Not all PDFs are created equal, and especially those created from scanned documents can be problematic if the scan quality isn't the best. Is there a dark background on the PDF, or stray marks or smudges?
You can try converting with OCR disabled at outlined in this document: How to disable Optical Character Recognition (O... | Adobe Community. But, while that's a good test to find out where the problem lies, you'll end up with a Word document that isn't editable, so it's not an optimal solution.
Please let us know how it goes.
Best,
Sara

I cannot convert pdf to word even thuogh i have subscribed to the service, please advise. Invoice Number 0646799448.pdf

I cannot convert pdf to word even thuogh i have subscribed to the service, please advise. Invoice Number 0646799448.pdf

Hi gregorr22536759,
I've checked your account, and it appears that there was a payment processing error. Please Contact Customer Care so that an agent can help you resolve that.
Best,
Sara

Please, advise mouse-over instant word by word translation for FF9

Similar Messages

Maybe you are looking for