Please, answer me about this AWT problem!!

Hi everybody,
this is the problem: how can I exit from an AWT window
without writing
System.exit(0);
I'm working with JES and it obviously crashes after
this command,
please, help me !!
Thank's in advance,
Bye!
Stefano Moro
Turin, ItalyCreate a top-level window from the Window class. Then use Frames as child windows. To remove the frame-window from the screen use "framename.setVisible(false)".
I hope this helped a bit. If you need anymore help you can contact me at [email protected]

Similar Messages

I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50) I tried to do the update but I got an error - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".

I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
== This happened ==
Every time Firefox opened
== When I try to do the update

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

I have problem with my I PHONE 4S Always its time out then i must restart my I phone please any help about this case ??

i have problem with my I PHONE 4S Always its time out then i must restart my I phone please any help about this case ??

Hello Pllumb,
It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

Good day Sidharth Namrta,
It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
iPhone: Troubleshooting issues making or receiving calls
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
What i did
1 . Added three products more to the existing in-app
2 . Tested with sanbox
i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
Is sandbox is down?Please help guys..

Apple's sandbox has been down practically all month. You can check the status here:
http://sandbox.itunes.apple.com

HT1937 currenty i am using iphone5s 4G i am having a pronlem whenever i disconnect a call or end it a error is displayed error code 29 07 please tell me about this thankyou

currenty i am using iphone5s 4G i am having a pronlem whenever i disconnect a call or end it a error is displayed error code 29 07 please tell me about this thankyou

I have the same issue at my mobile I contact the carrier service but it's not from provider , what is the solution for this matter

Please your opinion about this book

I heard that this book is really good for beginers " How to program in java 5th edition by Deitel" can you please give my your opinion about this book ,.
thank you.

I have Java How To Program 6th edition by Deitel and it's good but i think they could have used a little more plain English in the explanation of java.

Please help out solve this small problem.

I am using j2sdk1.4.1. I am getting this error whenever i am trying to connect oracle8i:-
Exception in thread "main" java.sql.SQLException: 20
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:407)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:152)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:214)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:193)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at Employee.main(Employee.java:9)
Can u please guide me to getsolved this problem?
Thanks in advance.
shrikanth

How about posting some of you code. It might help to see why you are getting an error.

Please help me in this tough problem in Java...im just new in Java program

my teacher give this as a problem. so tough. we are just starting and we are now in control structures. please help me to finish this problem. And my problem is...
Write an astrology program. The user types in his or her birthday(month,day,year),
and the program responds with the user's zodiac sign, the traits associated with each sign
the user's age(in years,months,day), the animal sign for the year(e.g., Year of the Pig,
Year of the Tiger), the traits associated with each animal sign, and if the year is a leap
year or not. The dates covered for each sign can be searched through the horoscope section
of a newspaper or through the internet. Then enhance your program so that if the user is one
or two days away from the adjacent sign, the program outputs the nearest adjacent sign as well
as the traits associated with the nearest sign. The month may be entered as a number from 1 to 12
or in words, i.e.,January to December. Limit the year of the birthday from 1900 to 2010 only.
The program should allow the user to repeat the entire process as often as desired.
You can use:
import java.text.DateFormat;
import java.util.Date;
import java.util.Calendar;
please...those who are genius out there in java program...help us to pass this project. Im begging! thanks!

Frowner_Stud wrote:
According to the second commandment: Thou shall not use the name of the Lord in vain.Is this not the definition of ironic, Mr. Morality?
i am not cheating. And more of the same.
we all know that an assignment is an assignment. a homework. homework means you can raise other help from somebody so that you will know the answer.You're not asking for "help" bucko, because you've been given decent help but have chosen to ignore it. No, you're asking for someone to do the work for you, and you may call it what you want, but in anyone else's book, that's cheating.
dont be fool enough to reply if you dont know the reason why i am typing here Don't be fool enough to think that you can control who can or can't respond.
because if you are in my part and if i know the answer there is no doubt that i will help you as soon as possible! Just because you have low morals doesn't mean that the rest of us do.
Thanks for time of reading and God bless you including you family!and to you and yours. Have a blessed day.

Please please please help me with this bizarre problem!!!

Hi there,
I am not an expert on web design and I am also not a complete newbie. I have built web designs before - and used frames and done it all on dreamweaver - however my target frames aren't working on this website and I'm not sure why???
I have two frames on my index page - one left and one right - the left is the menu and the right is the content of which ever button is selected from the menu in the left frame. However the targets don't work - when clicking on the buttons (links) it makes a new window pop up.
I have named the frames and saved the frame set as index.html.
The coding says for the shop button:
<td><a href="Shop.html" target="_right" onmouseover="MM_swapImage('Image4','','Images/Shop Button RO.jpg',1)" onmouseout="MM_swapImgRestore()"><img src="Images/Shop Button.jpg" name="Image4" width="163" height="56" border="0" id="Image4" /></a></td>
I have tried renaming the frames - tried a different computer - tried just about everything I can think of - it has always worked for me before but since building this site it doesn't! Have I missed something????
Please please help me - it's been driving me up the wall for 2 weeks!!!
Thanks in advance for yourhelp.
Pink
xxx

I haven't used frames since the late 1990s, so can't be of much help :-)
Here's a tutorial that may help:
http://www.dwfaq.com/tutorials/Frames/framesets1.asp
Page 4 shows how to link pages correctly
Is there a specific reason why you are still using frames... they are very old hat and hardly used anymore these days :-)
Here's the reason why frames are evil:
http://apptools.com/rants/framesevil.php
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Please help me understand this memory problem

Good day to all.
I have an application that reads email messages. The Message object holds a StringBuffer. If I run my app for a long time, 10,000 email messages, I get an out of memory error. I am using -Xrunhprof to try to track down the problem. I can see that if I process 50 messages, there are 45 still live at the end of the program. At least that is what I think is happening. Based on the output below is this assumption correct?
          percent         live       alloc'ed stack class
rank   self accum    bytes objs   bytes objs trace name
    1 40.94% 40.94%   873760   37 1267904   50   789 [C
// Trace info
TRACE 789:
     java.lang.StringBuffer.<init>(<Unknown>:Unknown line)
     com.PCM.SnifferMessageTools.MessageObject.<init>(MessageObject.java:46)
     com.PCM.SnifferMessageTools.MessageSnifferAutoRuleProcessor.main(MessageSnifferAutoRuleProcessor.java:118)If this assumption is correct I have some other questions. I'll wait to ask.

Post the source code where its happening and please use code tags (see Formatting help)
I can probably help. I have a theory or 2.

Please suggest solution to this printing problem

Hi,
I did a small project using forms and reports 6i. Now i prepared a repor that will calucalate the sum(expenditure)per report level. Now the problem is i want to print the sum which is in number form , in words. That is if the sum is 50000 then i want to print "fifty thousand". For this conversion from number to figure i wrote a small programme , which successfully compiled and created a function.
Now I want to create a field in the report and in which I want to call this plsql function and perform the number conversion of sum(expenditure)per report field. Please describe in detail how to make reference between these two fields i.e sum(expenditure)per report and field in which I want to run plsql code and thereby converting the sum into figures.
Thanks in advance
Prasanth a.s.

hi,
use this code
it works !!
regards
sandy
CREATE OR REPLACE FUNCTION NUMBER_CONVERSION(NUM NUMBER) RETURN VARCHAR2
IS
A VARCHAR2(1000);
B VARCHAR2(20);
X NUMBER;
Y NUMBER := 1;
Z NUMBER;
LSIGN NUMBER;
NO NUMBER;
BEGIN
X:= INSTR(NUM, '.');
LSIGN := SIGN(NUM);
NO := ABS(NUM);
IF X = 0 THEN
SELECT      TO_CHAR(TO_DATE(NO, 'J'), 'JSP') INTO A FROM DUAL;
ELSE
SELECT      to_char(to_date(SUBSTR(NO, 1,
          NVL(INSTR(NO, '.')-1, LENGTH(NO))),
               'J'), 'JSP') INTO A FROM DUAL;
SELECT     LENGTH(SUBSTR(NO, INSTR(NO, '.')+1)) INTO Z FROM DUAL;
A := A ||' POINT ';
WHILE Y< Z+1 LOOP
     SELECT TO_CHAR(TO_DATE(SUBSTR(NO, (INSTR(NO, '.')+Y), 1), 'J'), 'JSP')
     INTO B FROM DUAL;
          A := A || B ||' ';
          y :=y+1;
END LOOP;
END IF;

Can you please tell me about this MacBook Pro?

Thank you for taking the time to read this and hopefully helping me out. I am a first time Mac purchaser and I feel a bit out of my element here.
I am thinking of buying this MacBook Pro
(http://store.apple.com/us/product/FB604?mco=MTM3NDgzMzY)
If am not using the computer for editing or games, it will be for watching movie on-line and my dvd's.
Questions:
1.) The add says the computer has 4gigs of RAM. 256MB of shared RAM. And finally, a 512MB of graphics memory. What does this mean exactly? What does shared mean for this setup? Please feel free to give me as much info as possible.
2.) Overall, would it be a mistake to get this computer?
3.) Is that a decent amount of RAM and stuff for the video cards to work and also allow the OS to run well?
4.) When was this MacBook Pro made? Is it like from 2007 or something? Is this pretty much a new model or is it one of the first uni-body models a few years back?
Thank you for helping me out.
Message was edited by: Avi Rosenberg

The MacBook Pro you are considering is an early 2009 model. I own two of the 17" MacBook Pros the late 2008 models with the removable batteries. I looked hard and long and found one still on the shelf as NOS and bought it for the wife. I am not fond of the internal batteries like the model you are considering. When it comes time to change it--and that time will certainly come--it's not as snappy as push a button and remove.
4GB of ram on this computer is plenty. Today. 8GB is the future benchmark. I have 16GB in my i7 which tells you where ram is going to be. You can update ram cheaply at any time. Buying a computer is like owning a garage. You keep adding stuff until one day you drive home to find there is no room to park the car in the garage. Buy the most ram, best processor and biggest hard drive you can grow into for the next few years.
Here are the answers to your questions:
RAM: the power to work quickly.
RAM (Random Access Memory) is the memory your Mac uses to run software applications and store frequently accessed data. Adding RAM improves the performance of your entire experience: opening and working with large files; using the Finder and other elements of Mac OS X; and running graphics, audio, video, and scientific applications. In addition, more RAM speeds up your computer when you have lots of applications open at the same time.
Hard drive: room to work and play.
The hard drive is where your Mac stores all your data when you’re not using it. The capacity of a hard drive, measured in gigabytes, or GB, tells you how much room you have to store your files and applications. A typical application today may take 10 to 50 megabytes (MB); photos may take up about 2-4MB each; graphics files can occupy more than 100MB; and video files are often many gigabytes in size.
The standard hard drive in every Mac offers enough space for average users to store their documents and digital media. If you’re a photo, music, or video aficionado who likes to collect media files, a larger hard drive will give you room to grow your collection.
Processor: the high-speed engine of your Mac.
The processor is the brains of your Mac. Every second, it completes the billions of calculations needed to perform every computing task. Most Mac models feature the Intel Core 2 Duo family of processors, with twin processor cores that pack twice the power of a standard processor in the same space.
With many Mac models, you can upgrade the processor to a faster speed. If you plan to do processor-intensive tasks such as video rendering, gaming, and working with large, multi-track audio files, a faster processor can improve the performance of your Mac.
Graphics processor: your world in high resolution.
A graphics processor is simply a processor dedicated to turning huge amounts of data into graphics and video output. By taking this task away from the main processor, a graphics processor also makes the entire system faster and more responsive.
zoz

Someone please help me with this sync problem

Ok here we go. I have had my laptop for a little over two years. Ever since i got my iphone 4 last summer it has been such a pain. I have backed up my phone and synced it multiple times on my computer. Every so often though i plug my iphone into the computer and it recognizes it in itunes but asks me to either set as new iphone or restore from back up. I have tried to restore from back up and it says that the back up has failed even though there is obviously a back up on the computer. I have set as new and it works fine for a day or two and then i got to resync and same problem. I have completly unistalled itunes and all its files and redownloaded it and it worked for a week or so and then same problem. I have also had my computer reset to factory settings (for an unrelated issue) and it worked the first time but then stopped working. I have tried everything i can imagine and am at the end of my rope with this phone. im so ready to call it quits and get something different cause this is so frustrating.

How do you do what? Plug the iPhone into a USB port directly on your computer, or disconnect other USB devices? To disconnect a USB device unplug it from the computer. If it is a disk drive eject it first using the Eject icon in the System Tray. To plug the iPhone into a USB port directly on the computer insert the USB end of the sync cable into a USB port on the computer.
If you are using all of the ports on your computer get a hub and plug low power devices into the hub (e.g., keyboard, mouse). Or get a hub with its own power supply and plug your high power devices (disk drives, DVD drive) into it.

I am unable to print only the first few lines of an e-mail. Also, it will then print in a very small type and will also include extraneous information on the screen that are not part of the e-mail. Is there anything I can do about this annoying problem?

I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using Firefox

I talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks

Please, answer me about this AWT problem!!

Similar Messages

Maybe you are looking for