Please can anyone recommend an active C++ forum?

Folks,
Please can anyone recommend an active C++ forum?
I found a few with google, but it appears to be hours or days between responses on the "active" threads... is presume there's livelier one out there somewhere.
Thanx. keith.

yea i think thats one of those 'anything that needs to be said
has already been said' cases. i think most people have migrated
to c# or are preparing for c++0x?

Similar Messages

Can anyone recommend a different SAP forum to this one?

This community network is too controlled. PC gone mad. Oi, Chester you work for the MOD can you come up with a secret language so the Moderators don't get us.
Message was edited by:
There's only one F in FICO!

Hi FiCO,
Some more background to closing the Chester thread. We got complains in the backchannel regarding it. People felt uncomfortable, even uncomfortable to voice their opinion in this thread.
We would like for community members to step forward and voice their discomfort, otherwise we are the bad ones who use our moderator powers to silence voices here and if you don't know about the complains it looks heavy handed.
We also understand that some people don't want the confrontation or being the bad one. We got over 5 complains in a short time. It was a really tough call after all this is the Coffee Corner the forum created to post about SAP peripheral observations and thoughts. You have to admit, that the thread went into the outer orbit of SAP.
We want to keep this place open and welcoming to everyone. We also have to take into account the different sensibilities of the people frequenting this site.
Hope you understand, Mark.

Can anyone recommend a programme to convert a .mov file using windows 7 to iPad 2 please?

Can anyone recommend a programme to convert a .mov file using windows 7 to iPad 2 please?

I think handbrake is easier for novices.
Mpegstreamclip is good software with a lot of great features but may be more than most people need.

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

Please can anyone help with my registration issue?

Hi - I am having great difficulty registering (and therefore continuing to use) CS6. I purchased this a few days ago and installed.. at the time I could not register as it stated I had no internet connection or my clock was wrong - neither is the case (clock is fine and I have internet). So I chose to register later. Now, every time I try to use Photoshop it states I must register within x number of days or it will stop working.. but every time I try to register it again tells me I have no internet connection. SO I get a message stating I should contact customer support (hard as they are closed when I get back from work) or visit www.adobe.com/getactivated_uk, which I do. This tells me that if I am permanently offline (which I'm not but for the purposes of actually managing to register, let's say I am) that I can: ' Follow the installation or product launch screens until you see a link that says "I cannot connect to the internet" or "Having trouble connecting to the internet". Click the link and follow the instructions on the subsequent screen to initiate offline activation. Instructions there will tell you how to generate a Request Code.' What installation or product launch screens? I have already installed. I can nowhere find an option that states 'having trouble connecting to the internet'. How do I therefore generate a request code? Please can anyone help drag me out of this loop of madness? I am not on t-3 days and counting before it stops working:( So confusing, not at all easy to set up as I had hoped. Please help?

Will do my best. No, I appreciate is isn't Adobe support, I had thought that was forums were for - support and advice, sharing of knowledge? I had hoped someone else had experienced something similar in the past. Maybe I'm wrong, this is fairly new to me. Once I am up and running I will be offering helpful support to others. Thanks for your helpful support

Can anyone recommend a good app for designing and printing labels?

I have just switched from pc to mac and have pages on my macbook but it does not have a label function (please apple sort this out its the only major flaw!) so can anyone recommend a good app that will do what a pc does? I do not really want to pay £85+ for office for mac just for the word program

One way to find an app at the App Store is to use keywords.
Type print labels in the search field top right corner of the App Store window then press Enter or Return on your keyboard.
Click one of the apps listed. Always check Requirements under Information and definitely read customer reviews before purchasing and make sure there is a support link available in case you need to contact the app developer for questions.
This forum is mainly for troubleshooting the App Store.
For feedback for software designed for printing labels, try posting your topic in the Mac OS X community here.

Can anyone recommend a good UPK library structure for Oracle financials 11.5.10.2 (using UPK 11.1)?

Hi, Can anyone recommend a good UPK library structure for Oracle financials 11.5.10.2 (using UPK 11.1) please?

If you are using the application server that comes with Oracle Applications - you probably need to use the JDeveloper version that comes with that one too. (The OAF forum will have more info on this).
If you are using JDeveloper 10.1.3 then you can use a stand alone OC4J 10.1.3 to deploy your applications - and save yourself the hassle of messing up with your apps server.

Can anyone recommend me a Northbridge fan replacement?

I have a MSI K8N Neo4-F nForce4 and recently i have been experiencing random crashes and lock ups which i think are due to the northbridge fan failing (it was making horrible noises).
I tried to replace this with the Asaka heatsink/fan combination thing but it didn't fit under the graphics card as there is only about 1.5cm vertical space available. Can anyone recommend a replacement suitable for this motherboard? Preferably a cheap one. =)
Also -i don't know much about chipset- is it safe to run the computer without a northbridge fan installed assuming i don't do anything intensive like games or whatever?
Thanks in advance.

I was sniffing around some other forums,(as you do), when I came across this post. It sounds intresting, and may be worth giving it a try.
Quote
"Repair your noisy cpu and system fans
This is a fix that will last for a long, long time.
Buy some graphite powder and some oil at an auto or hardware store. They come in different packages. For oil, the best is the pen-type as they are easy to handle and only give a small amount at a time. Just about any oil in a pen format will work fine. The graphite powder comes in small plastic tubes. But make sure you get graphite powder, not graphite oil, its too thin for this job! So you need graphite powder in a small tube and oil in a round "pen" that can be squeezed out and placed just where you need it. Also, when the oil is used up in the "pen" you can open it and add your own oil.
First, clean the fan blades off real well. If you have a heatsink with the fan then clean the heatsink off as well. You can even use a bit of your oil and some q-tips for cleaning if needed. Then, take the small circle, it usually has a name on it, but its in the middle of the fan. Peel one edge up carefully and put a very small amount of oil in where you lifted the label up. Now add some graphite powder in the same place where you put the oil, add as much or a bit more of the graphite powder than the oil. Clean off excess oil and graphite and push the label back where it was. You may need a very small amount of duct tape to hold the label in position and to prevent leakage. This is important if the fan is going to "sit up" as opposed to lying flat.
Now put the fan back where you want it and when it starts spinning it may be noisy for a few seconds until the graphite\oil works its way in. Then it will stop and it will stay stopped for many years and you may very well not need to buy a new fan after all!
I experimented a lot with this and this is the very best way to quiet all those fans and have them work well. I have always been a big fan of those removable ide hard drive trays that you can buy. But the fans are the pits, they get noisy real fast. So i had to find a way to fix them as they are very expensive and hard to replace. Now i don't have to. Combo of oil and graphite is the very best, by far. One caution, graphite stains worse than
oil, so be careful! I'm talking about staining your clothes and hands.
You can use this system with all CPU fans, video card fans, system fans, and even fans inside power supplies. But one word of caution, its easy to open a power supply and take out the fan, but do be careful as there are voltages there can can hurt you badly. If you don't know what you are doing then wear rubber gloves to get the fan out and to put the fan back in after the
repair!
Trust me, this will work. If the fan spins my method will work for years and I have even fixed fans that were stuck and wouldn't spin! This is better done with the fan on the table but in those cases where you cant or don't want
to take the fan out of the system, that's where the "pen" with the needle comes in again, but i still find a way to get some graphite in as well, graphite is what makes the oil last a long time! And graphite is also an oil, but you need both together for maximum effectiveness. Oil by itself will only last a few weeks or so and then evaporate, and the fan will get noisy again. Its the graphite powder that does the long term job. The oil really only helps to spread the graphite powder around really well so the graphite can do the job!
Hope you do as well as i have with this info!"
End Quote.
Edit - Additional Info
The type of northbridge fan used on some MSI boards, eg K8N Platinum & Diamond etc, require that you remove the fan from the board first (you will have to remove the motherboard to do this). This is because the top of the shroud is attached from the bottom by two tiny Phillips type screws. Once you have removed the shroud, very gently prise off the fan from the motor assembly. There is no need to try and remove the three other tiny screws that secure the fan motor in place to the bottom half of the shroud. Once removed, you will see that under the fan is a small plastic pin that holds the sleeve bearing in place.
Russell.

Can anyone recommend a good instruction book for intermediate Mac users?

I have been using Mac for 3 years now so am not a total beginner, but still need help in many areas of OS X use. These forums are brilliant and thanks to the willing help from more expert members I have learnt a lot ( thank you), however there are times when just having a book open in front of you is the easiest way to get to grips with something. Can anyone recommend a good user manual for people like me who don't need a real beginners guide but also don't want a mind numbing, in depth, advanced text. I already have Maria Langers Visual Quickstart Guide which is useful but is exactly what it says, a quick start, and David Pogues Missing Manual which I find a little frustrating as he seems to fall short of explaining exactly how to do something after he says it can be done!
I guess what I am really after is a clearly written book that is good for beginners and more advanced users alike, with screen shots to show you what you should be doing.
Grateful for any suggestions.
macbook white 2ghz Mac OS X (10.4.6) 512mb ram and 60gig hard drive,

Hi again,
Many thanks for the feedback and the star!
For troubleshooting, Dr Smoke's Troubleshooting Mac OS X eBook is invaluable. Again, I have the Panther edition. I haven't, yet, felt the need for the Tiger edition with so many of the tips available free via his FAQs.
The only drawback, of course, is that when one is in a fix and possibly unable to boot up, the e-book isn't accessible unless one has a copy on another Mac.
Have fun,
Adrian

ADOBE DPS - MAGAZINE to TABLET in INDESIGN.....Need to brush up my tablet design in DPS (did it a few yearscback), can anyone recommend on the Adobe site tutorials that I can download, with artworks /buttons / actions and put it together?

....Need to brush up my tablet design in DPS (did it a few years back), can anyone recommend on the Adobe site tutorials that I can download, with artworks /buttons / actions and put it together?

See this forum post here from Bob. Best place to learn DPS is on Adobe TV http://tv.adobe.com/product/digital-publishing-suite/
If you are specifically looking to learn how to create interactive overlays, go here http://helpx.adobe.com/digital-publishing-suite/help/overview-interactive-overlays.html Watch the videos on "Folio Overlays panel, Part I & Part II"

HT3209 I have downloaded a Video on my iPhone 5 & I can watch it. But I am unable to watch on my ipad 3 it won't load & keeps saying it hasn't downloaded & there is a problem. Please can anyone help?

I have downloaded a video on my iPhone 5 & can play it. But it won't play on my iPad it says it can't download it & there is an error. Please can anyone help?

As it says on the page that you posted from :
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Why it's like that I don't think that Apple have said (these are user-to-user forums). If you haven't downloaded it on your iPad then have you checked to see if you can download it on your computer's iTunes (Store > Check For Available Downloads menu option) or Apple TV ?
If it doesn't show on either of them then you can try contacting iTunes Support and see if they will let you download it on a different computer/device or refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Can anyone recommend some server monitoring software

I am looking for some sort of software tool that will allow us to monitor the processor load similar to Activity Monitor but remotely. Server Monitor does not provided that particular function. Can anyone recommend one?
Thanks
X Serve Mac OS X (10.4.2)

paul Rubino-
Try this: http://www.apple.com/support/downloads/serveradmintools1
Luck-
-DaddyPaycheck

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search by operating system (if this is even possible).

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search on the App Store by operating system (if this is even possible). I currently have a MacBook running OS10.6.8. If you can recommend an app, please post the URL. Would appreciate any helpful suggestions....
<Email Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

IPhone 4 Cases... Can anyone recommend one?

I have the iPhone 4 "Bumpers" which are great but they don't offer me the amount of protection I would like to have for it. I'm referring to mainly the touch screen getting scratched or otherwise trying to carry it around w/me.
Can anyone recommend a good iPhone 4 case or a good place to purchase one?
Thanks!

You don't need to be in an industrial environment to get dust, lint and moisture in the ports/switches of the phone. Look at all the posts in this forum about "stuck in headphone mode" and "no sound" due to crap getting in the headset jack. How about "unsupported accessory" messages due to dirt in the dock port and all the post about moisture sensors triggering without immersion due to inadvertent sprays.
The Defender covers ALL ports, buttons and switches, keeping what you don't want out. It even covers the ring/silent switch avoiding unintended "silent mode"... Definitely ugly though.

HT2476 Can anyone recommend app/software to record from decks to mac?

I want to buy my husband the best app/software to record from his decks straight to our macbook pro for Christmas. Can anyone recommend what's best to buy and what leads I need to purchase???? Thanks

Then boot in Safe Mode, (holding Shift key down at bootup; takes longer to boot this way so be patient), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Your forum is here:
https://discussions.apple.com/community/notebooks/macbook_pro
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Safe Boot takes longer than normal startup - http://docs.info.apple.com/article.html?artnum=107394
Mac OS X 10.4, 10.5- Computer shuts down during Safe Boot - http://support.apple.com/kb/TA24054
If you don't have an installer disc available you can try effecting repairs using fsk in Single User Mode - http://docs.info.apple.com/article.html?artnum=106214.
Post by japamac about using fsk - http://discussions.apple.com/thread.jspa?threadID=1649143
Repairing permissions in Single User Mode - http://discussions.apple.com/message.jspa?messageID=7117122
Backup - clone and TimeMachine both
Keep at least 30% free on your boot drive
Buy a larger drive
Avoid anything that says "CleanMyMac"

Please can anyone recommend an active C++ forum?

Similar Messages

Maybe you are looking for