Please give steps to install and set environment variableof Oracle Coherenc

I am getting exceptions after installing Oracle Coherence & Java SDK 1.4.2 in windows 7 32-bit machine.
so, could you please give the steps to set the environmental variables.
If i run the cache server in Coherence.NET folder.. then its is showing that exception.
please help meee.......
Thanks,
Balakrishna..

Hi
I presume you meant to put this cry for help in your previous post...
got exception java.lang.ClassNotFoundException after install Oracle Coheren
It is best not to re-post the same thing more than once and especially not a post like the one above which does not actually tell anyone anything about your problem other than you have an issue with Coherence .Net on a 32-bit Windows 7 box using Java 1.4.2 (which as I mentioned in my reply to you other post is not actually correct).
JK

Similar Messages

Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

How to free space in start up disk in Snow leopard... please give step by step process

how to free space in start up disk in Snow leopard... please give step by step process someone help me ......

What's taking up all your space? To find out, click finder in your dock, the select your home user. This will display your user folders. Start by selecting your music folder by clicking it once, then the space bar on your key board. This will open a window display this files size.    Take note of the size of the following folders:
     1. Music
     2. Movies
     3. Pictures
     4. Downloads
This will help you determine where you space is going.
Once you have determined that.... deside what you want to delete or move in order to save space. Moving Library's to external drives is often the best way to free up space.
For iPhoto Libraries, see - http://support.apple.com/kb/ht1229
For iTunes Libaries, see - http://support.apple.com/kb/ht1449
For iMove Events, see - http://support.apple.com/kb/HT1026 and http://docs.info.apple.com/article.html?path=iMovie/8.0/en/19555.html
NOTE - With iMovie events, ensure you "move" the events, not just copy them as shown in the second article
Also go through your applications folder, and delete any unwanted applications.
Ensure your downloads folder is empty or unwanted downloads deleated
Ensure your iPhoto Trash is empty http://www.ehow.com/how_4501773_empty-trash-iphoto.html
Finally ensure your Trash is empty by clicking "finder" in the top menu directly beside the apple, and selecting "empty trash"
Hope that helps

Can any body please give me an idea and the Import and Export process?

Can any body please give me an idea and the Import and Export process? Excise Duty and other duties and so on.
I will be highly obliged for the help.
Regards,
Subhasish

for importing material,every importer has to file bill of entry in customs.
first vendor send some documents like certificate of origine , bill of lading, packing list etc to importer.
on the basis of those documents,importer makes supporting documents like duty calculation sheet, GATE declaration form,CHA declaration form,insurance certificate.
CHA (custom house agent ) file the bill of entry on behalf of impoter in customs.
custom verify it.
after duty payment, CHA can clears the consignment from custom.
there are two typs of BOE.
1 Home consumption BOE
2 Warehousing BOE
in 1st type of BOE , payment of duty is done at the time of custom clearance
and in 2nd type of BOE, importer can put material in warehouse without payment of duty. at time of using those material from warehouse,importer has to file out bond warehouse BOE and pay the all duties.

Adobe PDF installed and set as default printer causes incorrect pagination in Excel

I have come across an interesting bug. When Adobe PDF is installed and set as the default printer, Excel produces incorrect and inconsistent pagination--in my case one of the sheets is printed to two pages wide rather than three it should be (when Adobe PDF is not installed), resulting in 9 printed pages instead of 11. I have created a test case to reproduce it.
The sample file is located here: goo.gl/ZBiWj
The test case is here: goo.gl/6KbrO
Instructions are given on how to reproduce the error. The same error occurs when printing the sample file to Adobe PDF as a printer. Any ideas on how to resolve this?

Actually, the problem isn't really Acrobat or the Adobe PDF PostScript printer driver instance at all. The problem is that Microsoft Excel as well as other Microsoft Office applications adjust their printed output based on the characteristics of whatever is chosen as the current printer. This has been an issue since the earliest days of Windows.
Each printer driver instance contains information about the specific printer including but not limited to page size, duplex capability, paper types, page orientation, output trays, imageable area (i.e., page size less unprintable margin areas), and device resolution. Based upon what Excel finds as values for a number of these characteristics, Excel will format the page differently. Excel is particularly sensitive to not only page size, but also imageable area and device resolution. Imageable area is important because Excel is attempting to avoid printing at all on parts of the page that your printer cannot possibly image; this is typically about one quarter inch around for most laser printers, a bit less for inkjet printers unless you have a printer that claims edge-to-edge print capability.
The Adobe PDF PostScript printer driver instance has imageable areas that exactly match page size for all available page sizes. Thus, Excel formats on the basis that it can print all the way to edge of the page unless you set margins otherwise. It also defaults to 1200dpi. Change the device resolution to another setting via printer properties and you will likely see relayout. These same issues occur with Word and to some degree with PowerPoint.
There is absolutely nothing that Adobe can do about this. The same problem is exhibited if you have access to multiple different printer models with different characteristics on your computer and you change from one to another, even if you don't have any Adobe software loaded on your system. Users have complained to Microsoft for years about this issue, but they typically have not considered this an important issue to tackle (ribbon user interfaces are obviously much more important).
Sorry, but not anything we can really do to help you here other than to advise you to always compose your Microsoft documents with the current printer being the Adobe PDF PostScript printer driver instance, create a PDF file, and then print that from Reader/Acrobat to your real target printer. Alternatively, if you are very careful to setup the print characteristics of a spreadsheet to have large enough margins and headers/footers outside what would be the target devices non-printing area, you might get a bit better device independence - but don't count on it.
- Dov

Install and set up Developer Enviroment

Hi, ALL:
I am a new user for ORACLE. I am going to buy a powerful PC and
install the ORACLE8 on windows 95 or LINUX for learning. But I
don't know what products I should download to install and set up
the enviroment for creating database,queries,forms and reports.
When I took my database course at school, I also did a project
using oralce. But the enviroment was set up by DBA. Now, I have
to do it by myself.
Can any help me to get start using ORACLE8? Thanks.
Steven
null

If you setup an "archtype" for each type of computer, PPC, Intel mainly, I think that will be enough. The amount of RAM is unimportant but must be enough to meet the specs in order to run Leopard.
The only other items might be the graphics cards, but if you get 90% of the computers running using a few archtypes, then you can do the others manually.

Runtime.exec and setting environment variables

Runtime.exec and setting environment variables
I need a decent example which works on Windows.
Got any?

Thank you.
I was hoping for an example of the use of
http://java.sun.com/j2se/1.4.1/docs/api/java/lang/Runti
e.html#exec(java.lang.String,%20java.lang.String[]) or
http://java.sun.com/j2se/1.4.1/docs/api/java/lang/Runti
e.html#exec(java.lang.String,%20java.lang.String[],%20j
va.io.File) which take environment variable
information such as PATH.
The reason is because there is a library which is
being loaded via loadLibrary (
http://java.sun.com/j2se/1.4.1/docs/api/java/lang/Syste
.html#loadLibrary(java.lang.String) ). However, for
the child process to find the library the PATH needs
to be updated.
Any example regarding changing the PATH variable via
Java so that libraries can be loaded and processes
created? (Perhaps, I should make a new post and
restate the question with this more explicit
information?)
That won't work. LoadLibrary occurs in the JVM environment. As I said you can't change the JVM environment via exec().
If the shared library needs something in the path then you are going to have to set the path before your application starts up.
If you just need to load the library from someplace that is not on the path then you should be using System.load().

Windows 7 install and/or environment freezing on new 13" MacBook Pro

Hello! Long post, trying to give as much detail as I can... thank you in advance for your help on this!!
I think I posted in the incorrect forum earlier -- reposting here where it's more relevant.
I have a frustrating issue I've been battling all weekend. I can't seem to figure it out.
I'm trying to set up dual boot (Boot Camp) on my new 13" MacBook Pro, installing Windows 7. I've tried x64 (preferable) and x86. This is the mid-April 2010 13" MacBook Pro. C2D 2.4GHz, 4GB RAM, 250GB HD, nVidia 320M.
The problem I'm having is the machine is hard-locking. Sometimes it locks up during install (the 2nd phase, after it restarts and is "Completing Installation" (this step: http://spsexton.files.wordpress.com/2008/11/install-13.jpg). This makes me have to restart the installation completely, which is frustrating. Sometimes it locks up at the login screen. Sometimes it locks up once I'm logged in to Windows.
I have noticed that if the installation completes and I can get to the desktop, I can generally use it OK until I install the Boot Camp Drivers (3.1, from the 10.6.3 install DVD). I had a hunch and had also read that it may have to do with the nVidia drivers it installs, so I have tried uninstalling those prior to restart. It locks up anyway at restart (during login). Note that this generally is the case -- sometimes it locks up before I even get to the Boot Camp Drivers step. I sometimes can then get in to Safe Mode without it locking (sometimes it does, sometimes it doesn't), and I think I had some repeated errors in the Event Viewer that appeared erroneous (certainly not errors that should cause a hard lock) -- I can post these if needed when I get home from work this evening.
I was having consistent lockups during installation (at the "Completing Installation" step I mentioned above) when I'd let the Boot Camp Assistant set up the partition for me. I thought BCA might be doing something funny, so I set up the partition myself using Disk Utility then installed, and the install went in OK, however I still had it lock up after installing the Boot Camp Drivers.
Here's the steps I've been following:
1. Partition drive, either using Boot Camp Assistant or Disk Utility. Format to FAT if using Disk Utility.
2. Boot into Windows installer
3. Format drive to NTFS in installer
4. Install
5. Reboot
6. Complete install (often locks here as mentioned above)
7. If install completes, boot in to Windows
8. Change some system settings -- temp folders, workgroup name, pagefile size, turn off UAC
9. Reboot
10. Install Boot Camp Drivers from DVD (sometimes locks before I get here)
11. (have tried sometimes) Uninstall nVidia drivers installed by Boot Camp
12. Reboot
13. Consistent locks
14. Start over, both trying a new Partition creation (delete old, expand Mac partition, recreate new partition via BCA or DU), or using existing partition
Some other details:
1. This environment seems to work fine via Parallels. I only appear to have locking issues if I try to boot natively.
2. The Boot Camp Drivers installs a bunch of driver crud for devices the machine does not have. Could this be causing an issue? Drivers that Windows is attempting to load and failing, thus causing issues?
3. I'm mainly trying to install x64 due to the 4GB of RAM -- could this be an issue with the Boot Camp Drivers and Windows x64?
4. I don't think this is a motherboard issue as the machine is completely stable otherwise -- I'd think that if it was a hardware failure, especially with the motherboard, I'd see other issues elsewhere..
Any ideas??? I'm pulling my hair out on this one. The machine is brand new (just got it Tuesday last week, just started using it this last weekend). My last MacBook Pro (previous model 13" MBP) took Windows 7 without a single hitch and ran smooth as butter.
Help?

i just got some solution for this... dunno whether it will work for u all... anyone who got the same problem... try to press power button right on welcome screen after u type ur username and password.... or if u didnt put a password, u can press the power button right on the welcome screen... and then it will automatically to the lock state... and then u login again... the windows will appear... i work it on windows 7 64 bit... if u can login for that 1st time, for next time, u dont need to press the power button anymore... for me it works... XD
cheers...
gud luck for u all... =)
Message was edited by: conggg

How to silently install and set default settings

I need to deploy FireFox 16.0.2 to a bunch of Windows computers and set some default settings. Is there a good article that can walk me through it?
I also need to set the home page, have it not check for the default browser, and disable updates. The -ms option does silently install FireFox so I guess I just need to know how to configure FireFox for our environment and push out those settings with the install.
I have versions ranging from 1 to 15. Do those old versions need to be removed first or can 16.0.2 be installed over what is already there? Is there an uninstall switch for this so that I can create a package to remove it?

hello jmoody76 - you can manage central settings with the mozilla.cfg file in the firefox program folder. this article gives some guidance on how to implement that: [http://kb.mozillazine.org/Locking_preferences]
i think it may work to just install the new versions on top of the older ones (though i'm not sure if this has any unintended side effects on those very old installations) or according to https://wiki.mozilla.org/Installer:Command_Line_Arguments it's possible to run a silent uninstall through the setup executable by /S.

How to install and set up SAP BW 7.0

I have already worked against SAP BW 3.5/3.1 server with SAP DPA for a while. Now I would like install and setup the BW server by myself. How could I get the installation for BW 7.0? Is it part of NetWeaver 2004s? What is the general steps to install BW 7?
Thanks

Hi Zhang,
Yes. It is part of NW2004s. So when you install NW2004s you can select the BI Component. Make sure you select both the BI ABAP and Java stack. Also remember to install the BI content after this. The BI 7.0 has a separate frontend so install that too. Make sure all the frontend and backend are on the same patch level.
You can find all the set-ups and patches at http://service.sap.com/swdc.
Bye
Dinesh

SAP Easy Document Management installing and setting

Hi,
We are in the middle of installing the content server for DMS. Also I'd like to install SAP Easy Document Managemnt, so that my end users can access the files easily. I have a hard time finding documentation on the installation of EDMS and step by step detail of what to do.
From reading some of the notes, I think I have to
1. Download the EDMS software to my PC (will also have to install on each user's computer).
2. Also it said you have to make the settings in Customizing for DMS has to be done (but doesn't say what settings ????)
Questions,
1. Can anyone tell me where I can get the detail information about how to install and
2. Do you have any documentations on what to do with the settings in Customizing for DMS so that I can use the EDMS?
3. How do I handle the diff SAP Environments with this EDMS ?
Thank you,
Sam

Hi Samantha
I don't think there is much in the line of documentation on this. Unfortunately, for most of the DMS consultants, its been a learn through trial and error process, but if you are fairly competent technically, a lot of it is not too difficult.
1. Not much information unfortunately.
2. You will need to create an FOL document type if it doesn't exist already. ECC6 came standard with the correct EasyDMS configuration but earlier versions of SAP were not setup correctly. There are also additional authorisation applicable to easydms. If you are not sure what they are you can do an auth trace when creating a document in easydms and it should give you them, but they are RFC auth's and hierarchy creation auths.
3. Difficult to say without knowing the environments. There are some limitations with EasyDMS that may affect the DMS design, for example, you can't insert enhancements on classification because they don't appear. (or link to check tables).
Regards,
Athol

After update plugins are re-installed and setting are lost

Hi, after last 2 updated I experienced same problem.
I have changed some setting (like ask to save tabs before exit etc...) and after update all settings are reverted to original ones + all addons (and addon settings) are also lost. Actually I think that ALL ADDONS were actually re-installed and hence I got default settings with every addon so last 2 updates I had to optimize each and every plugin.... annoying....
Will this be the case with every future update ? If so, what can I do to save my settings and addons

Hi,
Please see [https://support.mozilla.org/en-US/kb/Preferences%20are%20not%20saved this].
If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]
The official forums of all the installed security software would also be helpful.

Installing and setting up Real Application Cluster

We installed Oracle 9i R2 and then inserted the CD of RAC. The CD did not open any front-end for installing and configuring RAC. Please let me know how to start the setup and configure RAC on Windows XP.

Maybe searching and starting manually setup on RAC-cd will work?

Please please give the neat way to set environmental variables for tomcat

Please forgive me to create a new post for this topic which have been created by many. i have configured tomcat and set enviromental variables in xp before, when i formatted my system everything washed out.
i configured tomcat with the help of post in this community which have been clearly explained but i could nt trace that post nw.
so do tell me how many environmental variables i should set with eg, earlier i have created four. i am badly needs to work in tomcat.
note : i dont want to set using command prompt

Mahesh_yeswecan wrote:
i configured tomcat with the help of post in this community which have been clearly explained but i could nt trace that post nw. Your posting history is here

Setting environment variables oracle forms 10g(10.1.2.0.2)

Hi,
We are migrating forms from 6i to 10g(10.1.2.0.2). We want to run reports in batch form Forms 10g and setting these environment variable(same as they are set in 6i).Please let me know correct path for these variables in Application Server.
FORMS_OUTPUT=
FORMS_MAPPING=
FORMS_REPFORMAT=
REPORTS_NO_DUMMY_PRINTER=
DOC=
DEMO60=
GRAPHICS60_PATH=
UI_ICON=
## setting for Project Builder
ORACLE_AUTOREG=
Thanks in advance
Sandhya

... and beside of what Jan said, look at the following whitepaper:
http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
Note that all directory names and file names that have a "90" in it are now without or have a frm prefix instead.
Frank

Please give steps to install and set environment variableof Oracle Coherenc

Similar Messages

Maybe you are looking for