Install and set up Developer Enviroment

Hi, ALL:
I am a new user for ORACLE. I am going to buy a powerful PC and
install the ORACLE8 on windows 95 or LINUX for learning. But I
don't know what products I should download to install and set up
the enviroment for creating database,queries,forms and reports.
When I took my database course at school, I also did a project
using oralce. But the enviroment was set up by DBA. Now, I have
to do it by myself.
Can any help me to get start using ORACLE8? Thanks.
Steven
null

If you setup an "archtype" for each type of computer, PPC, Intel mainly, I think that will be enough. The amount of RAM is unimportant but must be enough to meet the specs in order to run Leopard.
The only other items might be the graphics cards, but if you get 90% of the computers running using a few archtypes, then you can do the others manually.

Similar Messages

Adobe PDF installed and set as default printer causes incorrect pagination in Excel

I have come across an interesting bug. When Adobe PDF is installed and set as the default printer, Excel produces incorrect and inconsistent pagination--in my case one of the sheets is printed to two pages wide rather than three it should be (when Adobe PDF is not installed), resulting in 9 printed pages instead of 11. I have created a test case to reproduce it.
The sample file is located here: goo.gl/ZBiWj
The test case is here: goo.gl/6KbrO
Instructions are given on how to reproduce the error. The same error occurs when printing the sample file to Adobe PDF as a printer. Any ideas on how to resolve this?

Actually, the problem isn't really Acrobat or the Adobe PDF PostScript printer driver instance at all. The problem is that Microsoft Excel as well as other Microsoft Office applications adjust their printed output based on the characteristics of whatever is chosen as the current printer. This has been an issue since the earliest days of Windows.
Each printer driver instance contains information about the specific printer including but not limited to page size, duplex capability, paper types, page orientation, output trays, imageable area (i.e., page size less unprintable margin areas), and device resolution. Based upon what Excel finds as values for a number of these characteristics, Excel will format the page differently. Excel is particularly sensitive to not only page size, but also imageable area and device resolution. Imageable area is important because Excel is attempting to avoid printing at all on parts of the page that your printer cannot possibly image; this is typically about one quarter inch around for most laser printers, a bit less for inkjet printers unless you have a printer that claims edge-to-edge print capability.
The Adobe PDF PostScript printer driver instance has imageable areas that exactly match page size for all available page sizes. Thus, Excel formats on the basis that it can print all the way to edge of the page unless you set margins otherwise. It also defaults to 1200dpi. Change the device resolution to another setting via printer properties and you will likely see relayout. These same issues occur with Word and to some degree with PowerPoint.
There is absolutely nothing that Adobe can do about this. The same problem is exhibited if you have access to multiple different printer models with different characteristics on your computer and you change from one to another, even if you don't have any Adobe software loaded on your system. Users have complained to Microsoft for years about this issue, but they typically have not considered this an important issue to tackle (ribbon user interfaces are obviously much more important).
Sorry, but not anything we can really do to help you here other than to advise you to always compose your Microsoft documents with the current printer being the Adobe PDF PostScript printer driver instance, create a PDF file, and then print that from Reader/Acrobat to your real target printer. Alternatively, if you are very careful to setup the print characteristics of a spreadsheet to have large enough margins and headers/footers outside what would be the target devices non-printing area, you might get a bit better device independence - but don't count on it.
- Dov

How to install and set up SAP BW 7.0

I have already worked against SAP BW 3.5/3.1 server with SAP DPA for a while. Now I would like install and setup the BW server by myself. How could I get the installation for BW 7.0? Is it part of NetWeaver 2004s? What is the general steps to install BW 7?
Thanks

Hi Zhang,
Yes. It is part of NW2004s. So when you install NW2004s you can select the BI Component. Make sure you select both the BI ABAP and Java stack. Also remember to install the BI content after this. The BI 7.0 has a separate frontend so install that too. Make sure all the frontend and backend are on the same patch level.
You can find all the set-ups and patches at http://service.sap.com/swdc.
Bye
Dinesh

After update plugins are re-installed and setting are lost

Hi, after last 2 updated I experienced same problem.
I have changed some setting (like ask to save tabs before exit etc...) and after update all settings are reverted to original ones + all addons (and addon settings) are also lost. Actually I think that ALL ADDONS were actually re-installed and hence I got default settings with every addon so last 2 updates I had to optimize each and every plugin.... annoying....
Will this be the case with every future update ? If so, what can I do to save my settings and addons

Hi,
Please see [https://support.mozilla.org/en-US/kb/Preferences%20are%20not%20saved this].
If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]
The official forums of all the installed security software would also be helpful.

How to silently install and set default settings

I need to deploy FireFox 16.0.2 to a bunch of Windows computers and set some default settings. Is there a good article that can walk me through it?
I also need to set the home page, have it not check for the default browser, and disable updates. The -ms option does silently install FireFox so I guess I just need to know how to configure FireFox for our environment and push out those settings with the install.
I have versions ranging from 1 to 15. Do those old versions need to be removed first or can 16.0.2 be installed over what is already there? Is there an uninstall switch for this so that I can create a package to remove it?

hello jmoody76 - you can manage central settings with the mozilla.cfg file in the firefox program folder. this article gives some guidance on how to implement that: [http://kb.mozillazine.org/Locking_preferences]
i think it may work to just install the new versions on top of the older ones (though i'm not sure if this has any unintended side effects on those very old installations) or according to https://wiki.mozilla.org/Installer:Command_Line_Arguments it's possible to run a silent uninstall through the setup executable by /S.

SAP Easy Document Management installing and setting

Hi,
We are in the middle of installing the content server for DMS. Also I'd like to install SAP Easy Document Managemnt, so that my end users can access the files easily. I have a hard time finding documentation on the installation of EDMS and step by step detail of what to do.
From reading some of the notes, I think I have to
1. Download the EDMS software to my PC (will also have to install on each user's computer).
2. Also it said you have to make the settings in Customizing for DMS has to be done (but doesn't say what settings ????)
Questions,
1. Can anyone tell me where I can get the detail information about how to install and
2. Do you have any documentations on what to do with the settings in Customizing for DMS so that I can use the EDMS?
3. How do I handle the diff SAP Environments with this EDMS ?
Thank you,
Sam

Hi Samantha
I don't think there is much in the line of documentation on this. Unfortunately, for most of the DMS consultants, its been a learn through trial and error process, but if you are fairly competent technically, a lot of it is not too difficult.
1. Not much information unfortunately.
2. You will need to create an FOL document type if it doesn't exist already. ECC6 came standard with the correct EasyDMS configuration but earlier versions of SAP were not setup correctly. There are also additional authorisation applicable to easydms. If you are not sure what they are you can do an auth trace when creating a document in easydms and it should give you them, but they are RFC auth's and hierarchy creation auths.
3. Difficult to say without knowing the environments. There are some limitations with EasyDMS that may affect the DMS design, for example, you can't insert enhancements on classification because they don't appear. (or link to check tables).
Regards,
Athol

Installing and setting up Real Application Cluster

We installed Oracle 9i R2 and then inserted the CD of RAC. The CD did not open any front-end for installing and configuring RAC. Please let me know how to start the setup and configure RAC on Windows XP.

Maybe searching and starting manually setup on RAC-cd will work?

Joomla! on OS X: How to install and set up?

Hi All,
I am wanting to install/set up Joomla! on my PowerBook, and can't seem to find any clear, concise information on how this is done. What I want to do is set it up on my local machine, build a site using Joomla! and test it locally, then eventually publish it to a remote server.
I'm not too experienced in web design/development so I don't know much - bear with me. Would anyone here mind breaking it down as step-by-step as possible?
What do I need to download, what needs to be installed; where. If there are any Command Line commands, could you walk me through them?
I do/did check out the Joomla! forums but no one seems to be able to provide a clear answer (or perhaps are more PeeCee oriented and don't feel confident in guiding a Mac user?).
Thanks for your patience and time, I hope this isn't asking too much.

Hi, M.
1. Your question belongs on the Joomla Installation Forum. I presume you've read their Installation Guide which, in the typical fashion of Open Source projects, is rather terse and geared to either Linux or Windows users.
You said you "did check out" their forums, but have you tried posting this question on their forums? I'd suggest that and, if you don't get an adequate response, then perhaps you'd be better served by using a different product.
I don't mean to send you somewhere else, but you should be able to find help from Mac OS X users who've installed Joomla on their Installation Forum.
2. You wrote: "I'm not too experienced in web design/development..."IMO, Joomla is not a product for you to begin with.
You can try the following apps for free:
- Site Studio It's only US$30.00 to purchase. It's designed for coding in HTML.
- Freeway Express. It's US$89 to purchase and takes a graphical approach to Web design. <a href="http://www.softpress.com/products/freewayprointerf.php"">Freeway Pro</a> offers more functions, but Express may be enough if you're just starting and, if memory serves, you can upgrade from Express to Pro.
If you are a student, you can get pro-level Web Design apps such as <a href="http://www.adobe.com/products/golive/main.html">Adobe GoLive CS2 and Dreamweaver at deep educational discounts, e.g. US$100 or less.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Connect add-in crashes with 'plugin failure' when I click volume controls F11 or F12 On MAC OSX 10.9.5. Latest add-in installed and set to run in unsafe mode

I am running Adobe Connect on a MAC using OSX 10.9.5 and have just installed the latest version of the add-in ( 11.9.971.247) to try to fix the problem. Every time I adjust the volume with F11 or F12 I get a white screen and the message 'Plug-in Failure'. I have also set the add-in to run in Safari in 'unsafe mode' but this has not fixed the problem.
I've been running Connect on this MAC for many months now without the problem but cannot understand why it has suddenly started. Any help or ideas would be gratefully appreciated.
Thanks - Chris

Thanks again. I finally found the answer and it is working in Safari and Chrome
First I updated Flash Player to the latest version (not sure whether this was required)
Then I found that even though the add-in was installed that Connect was not using it, as all the browser tabs were still showing, and adjusting sound was crashing the program.
I deleted the add-in directory from ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/connectaddin
I deleted the add-in directory from ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/adobeconnectaddin
Then I restarted the meeting and created a new Pod and Selected 'Share my Screen'
This forced the add-in to download and install.
Adobe Connect now starts from the add-in and not the browser
Many thanks for your Help Sameer
Chris

How to install and set printer paper and tray automatically via script or batch file

Hi,
Our firm using HP Printers and we need to deploy printer in Citrix Environment where setting does not save to the Base PC Image.
Because our Environment is Citrix (User Settings and Printer are deployed when user login).
Can we build the setting into the Base PC Image for All users?
Printer get install when using login.
Problem that I am encounter right now are:
1. How to correctly identify all tray from each printer.
2. How to set all paper tray to A4
I am currently using Powershell Script to install printers during login, all the printer driver has been installed to the Base PC Image.
But the trouble I have is when the script run to completion.
It only added the printer.
I've been googling, but I can't find a way to detect printer tray or how to set all the tray to A4.
I don't mind using any type of script/batch file or even program.
Any of the following language is C#, VB.NET, powershell, vbscript or Event Access to HP API ?
Our Environment:
Windows 7 x32 SP1
Windows Server 2008 R2 (Print Server)
I am using the PCL 6 Printer Driver.
Our Printers are:
HP LJ CP1025NW
HP C LJ 4650
HP C LJ 3525
HP LJ 1045
HP LJ 2050
HP LJ 3055
HP LJ 4015
HP LJ 4350
HP LJ 4700
HP LJ 2035n
Thanks in advance
Regards Dat.

Most of those printers are commercial grade printers. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Total newbie needs help installing and setting up Solaris 10 as a server

i'm attempting to set up one computer to act as a file and print server on my home network, so that i can store all of my music and video files on it instead and print to my parallel-only laser printer. 80% of the time i'm using my laptop, so i need the mass storage and printer to be handled by another device - the server!
i'm not sure if i'm even installing Solaris 10 correctly. how should it be installed to then act as a server? my two (incredibly long, like 3+ hours each) install attempts so far have resulted in an OS that looks like a nice fancy GUI-laden desktop which doesn't appear to show me my 750G SATA storage drive (the OS is on a 40G IDE drive).
in the end, i'd like to have the system working so that my only interaction with it is the power button - press it once to power it on and it'll boot up and long in automagically and make itself seen over the network (with printer and files stored on drives accessible to my laptop or any other PC that's on the same network), and then press the power button again to shut down the entire system gracefully (so far, when i press the power button, it's a quick kill like pulling the power cord - i'm pretty sure that's a bad way of having the system shut down, so how do i change it?)
i'm really hoping to use Solaris due to the promising ZFS scheme. my only exposure so far to unix / linux has been with ubuntu, which i usually like but sometimes loathe (primarily file permissions and network manager).

Let's try step by step rather than asking for setting up a server as a while and I'll try to help you as much as I can.
For setting up a printer, it's not that easy or quick setting up a printer on Solaris, I mean it's not like plug-n-play. Tell us about your printer and how it's connected to your system (usb, ethernet, parallel, serial).
As for shutting down the system, it's recommended to use the shutdown commnad like this:
# shutdown -y -i0 -g0
--gibb

Please give steps to install and set environment variableof Oracle Coherenc

I am getting exceptions after installing Oracle Coherence & Java SDK 1.4.2 in windows 7 32-bit machine.
so, could you please give the steps to set the environmental variables.
If i run the cache server in Coherence.NET folder.. then its is showing that exception.
please help meee.......
Thanks,
Balakrishna..

Hi
I presume you meant to put this cry for help in your previous post...
got exception java.lang.ClassNotFoundException after install Oracle Coheren
It is best not to re-post the same thing more than once and especially not a post like the one above which does not actually tell anyone anything about your problem other than you have an issue with Coherence .Net on a 32-bit Windows 7 box using Java 1.4.2 (which as I mentioned in my reply to you other post is not actually correct).
JK

Task list or how to install and set up BW 7.0

Hi Gang!
I have the privilege of setting up a u201Cvirginu201D SAP BW 7.0 system.
Does any on have a u201CHow Tou201D or task list of the required preparatory steps?
With transaction code or Program?
For both Basis and BW activities?
SAP published some very good upgrade guides along these lines, but I canu2019t find a list for a new installation.
Thank you for your help,
John Hawk

Hi John,
The steps provided by Ravi is for Installing precal Server but I understand your looking for help on primary installation of Frount End BI tool and other Component Installation. As you have mentioned it primary work of Basis to worry about. But for having overview you can look at below mentioned documnets
Look into Front End Installation guide
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3a/431e02a4939240b510e851df092c50/frameset.htm
YOu might me interested to read this interesting piece of information
http://wiki.sdn.sap.com/wiki/display/subscription/InstallationCheatSheetforWindows-MaxDB
SAP FRONTEND TOOLS
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID0690225450DB12415337244344821916End?blog=/pub/wlg/4495

CS6 Installing and Setting Up

I accepted the 30-day trial for CS6 and downloaded the program, but I haven;t been able to installs or set up this program. I get an error message saying "Uncheck the Use grphics Proessor check box in the Performance anel of the Preference dialog". How do I do this. My computer meets the system requirements of CS6, namely, I'm running Windows 7 using a 64 bit 2Ghz processor, 2 GB or RAM, more than 1 GB of available hard-dist space for installation, with 1024x768 display and minimum of 512MB of VRAM on a Dell Inspiron E1505 lap top.

which cs6 suite are you trying to install?

Firefox 10 or later - how to silent install and set installation path

I need to install firefox remotely and silently. I have tried using a configuration.ini file and am able to set the install directory but not the path - it installs into program files

hello jmoody76 - you can manage central settings with the mozilla.cfg file in the firefox program folder. this article gives some guidance on how to implement that: [http://kb.mozillazine.org/Locking_preferences]
i think it may work to just install the new versions on top of the older ones (though i'm not sure if this has any unintended side effects on those very old installations) or according to https://wiki.mozilla.org/Installer:Command_Line_Arguments it's possible to run a silent uninstall through the setup executable by /S.

Install and set up Developer Enviroment

Similar Messages

Maybe you are looking for