Please help! Can't find the option 'Press enter key to send'

Hi guys, Recently I cleared my whatsapp data and cache accidently. Till then I was using my slide keyboard 'enter key' to send the message. I was able to restore my whatsapp but the 'enter key' is taking me to a new line instead of sending the message, which is annoying. The option to switch it back is available but I am not able to recall it exactly where...Phone: Xperia Mini ProOS: Gingerbread (2.3.4) Thanks,Avi

Well, this is a setting in the whatsapp and not the phone itself. Unfortunately I haven't used whatsapp myself but maybe someone else here has and can help you out.

Similar Messages

How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote nor can I find the option to make it appear. Any help would be greatly appreciated.

How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote, nor can I find the option to make it appear. Any help would be greatly appreciated.

Your steps so far are OK but you may want to try:
1 Trash your user library Caches folder (House Icon with short name in Finder window (hard drive window)GOTO:House icon > Library folder > caches folder
2 Trash the com.apple.Safari.plist file in User library > preferences folder > Safari.plist as well as removing the library Safari folder its self.
3 you can selectivly re-install Safari 2.0 from your OS Tiger Install disk 1, (see Knowledge base article 301229 for how to just select the Safari Application) without doing a complete system Archive and Install.
4. Create a new Test user account on the system and test how Safari responds in the Test user, see if its a user related issue and not system issue.
5. Still no Safari response? have to do an Archive and install (not preserving user and network settings)article 107120
PS. Issue may be related to actual internet connection connectivity, power cycle cable modem and router or airport if using one as well as the computer(keep unplugged for 3-5 min) and plug the cable modem in and then the router/airport then power on the computer. Do the Airport Admin utiliy (applications, utilities on HD_1)update.
- do a hard reset of airport knowledge base article 108044(Express base) and 107451 (Extreme base)
- Check with internet provider for connection issues "cannot find server" ect.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Ciao, sono sulla mia libreria musica, faccio tasto destro su un brano ma nel menu non c'è l'opzione "Mostra in Finder", come faccio? Hi, I'm in my library and if I click on a track I can't find the option "Show in Finder", why?

ciao, sono sulla mia libreria musica, faccio tasto destro su un brano ma nel menu non c'è l'opzione “Mostra in Finder”, come faccio?
Hi, I'm in my library and if I click on a track I can't find the option "Show in Finder", why?

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

HT5312 I can't find the option of reset the security quotation

I can't find the option of reset the security quotation please I need help because I can't buy any thing from app stor

The option to send reset info will only appear if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If it's not appearing then I assume that you don't have one, in which case see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

How can i find the option to delete a recent print job from the "View Job History

1. Photosmart 5510 e-ALL-IN-ONE SERIES
2. Window 7 64 bit
How can i find the option to delete a recent print job from the "View Job History

Hello alfmswongg,
Currently there is no option to delete print jobs from the "View Job History" section of ePrintCenter.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting Display on my mid 2012 MacBook Pro.

Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting>Display on my mid 2012 MacBook Pro.
I've rebooted all 3 devices, still does not work. Both Apple TV and MBP are on the same wifi. And the Apple TV AirPlay option is on. Can someone help? Thank you.

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

Hi Djmontanalv,
Please go through the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Regards,
Anand

I can't find the option "Basic" in Lightroom

Hi!
I don't know which button I have pushed, but I can't find the option "Basic" anymore. I can see the options "Histogram", "Tone Curve" etc. But I can't find "Basic". I'm more or less a beginner with Lightroom, and I would be very grateful if someone could help me find it. This problem almost drives me crazy. :-P
/Glenn

Cmd/1 Mac or Ctrl/1 Windows. Or, right-click (Cmd/click Mac) on one of the other panel headers in the right-hand panel and make sure there is a checkmark in Basic.

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

Where can I find the options for usetopicformat?

Where can I find the options for usetopicformat? It appears that usetopicformat="0" (I'm formatting breadcrumb placeholders) ignores the style sheet and uses the settings in the rh-placeholder string).
I'd like to put settings in a style sheet. But changing to usetopicformat = "1" doesn't seem to help.
Are these "advanced" codes documented anywhere?
The full context is: I'm using a fixed position on the screen so the breadcrumb doesn't scroll (which works) but the classes in the style sheet are ignored.
Extract from topic:
<div id="test" class="test" style="background-color: #ffffff; border: none; padding: 5px; position: fixed;
width: 400px; height: 30px; top: 100px; right: 50px;">
<?rh-placeholder type="breadcrumbs" ph-align="2" sep-char=">" home="Home"
usetopicformat="1" ph-style="font-family:Arial;font-size:10pt;font-weight: normal;font-style: normal;text-decoration: none;" ?>
</div>
Extract from style sheet:
/* Classes below should not scroll.*/
p.test {
      position:fixed
      font-size: 8pt;
Output is to Webhelp.
Tom

Hi Tom,
As far as I have found, using the topic style prevents Robo from using it’s own styling for the breadcrumbs. But I saw that it also adds the class ‘breadcrumbs’ to the paragraph holding the breadcrumbs. So you should be able to use the following CSS selector to style the placeholder:
p.breadcrumbs {
                //Your styling here
Greet,
Willam

TS3899 I can't find the option to set how many emails display on my iphone

I can't find the option to set how many emails display on my iphone. Help!! This always used to be under settings mail but the option seems to have disappeared.

That Number of Mail to be Displayed on an iOS Device Option has been removed after the iOS 7 Update, you can find the other users having the similar Question but with No Solution yet.
https://discussions.apple.com/thread/5321047?start=0&tstart=0

HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

Try Perian.
http://perian.org/

Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09, but can't find the option in new Pages.

Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09 but can't find the option in new Pages. I have documents created in Pages 09 and want to do some further work on them, but am now using new pages.

There were 100+ features that didn't make it into the "new & improved, rewritten from the ground up” Pages 5. Some have returned with the updates & there are some new features that are worthwhile, but there are still 90+ features missing. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

Please help! Can't find the option 'Press enter key to send'

Similar Messages

Maybe you are looking for