Please help!  I try to connect to the Internet but appears inscription There is no expansion of kernel PPP. Yesterday I used internet through the same connection- Dsl pppoe

Please help!  I try to connect to the Internet but appears inscription There is no expansion of kernel PPP. Yesterday I used internet through the same connection- Dsl pppoe. Wi fi cannot connect too. On ipad and iphone it is work.

That's odd.
Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL.

Similar Messages

  • Socket Closed error please help us finding a fix for the same

    Hi everyone,
    I have a web application deployed on Weblogic 10.3.4.0. In the application there is hyperlink to download a resouce (say an PDF document). Upon clicking the link, IE shows the Open/Save/Cancel dialog box. If the Open/Save/Cancel dialog box is not acted upon by the user within 1 min after it pops up, Weblogic is closing the socket. This causes IE to only download a part of the file say 784 KB or something. Whereas the entire file maybe 1MB in size. Please help in fixing this issue ASAP.
    Thanks in Advance
    java.net.SocketException: Socket closed
    at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:99)
    at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
    at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
    at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
    at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
    at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
    at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
    at weblogic.servlet.internal.CharsetChunkOutput.implWrite(CharsetChunkOutput.java:396)
    at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:198)
    at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:139)
    at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:169)
    at com.teja.systemi.util.AroundData.copyStream(AroundData.java:311)
    at com.teja.systemi.client.servlet.servant.Newdownloadsingle.producePageData(Newdownloadsingle.java:108)
    at com.teja.systemi.client.servlet.servant.BaseViewController.serve(BaseViewController.java:542)
    at com.teja.systemi.client.servlet.FrontController.doRequest(FrontController.java:226)
    at com.teja.systemi.client.servlet.FrontController.doPost(FrontController.java:128)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: 910597 on Jan 27, 2012 2:15 AM

    What do you mean by "moo" ?
    Huh? You don't know about the moo? Are you livin' in a barn or sumthin'
    Sorry, corny joke.
    Seriously--if you haven't heard about the moo, then check out the MacBook forums. Nearly every third or fourth post is about the mooing problem.
    My own MacBook moos, but it's not so bad that it makes me upset. I understand, though, that others have it much worse.
    Black Macbook; Mini 1.5GHz (Late 2005); Mini 1.4GHz; PB G4 1GHz; PB Lombard; PB 2400; PMac G3; Blueberry iMac; iPod nano 4GB; and a talking Bill King bobblehead doll--Holy Toledo!

  • I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    I forgot the code for my iPhone to access the Home screen I do , please help me
    try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    Hello polo-angulo,
    I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
    Resolve iOS update and restore errors in iTunes - Apple Support
    Get help with iOS update and restore errors - Apple Support
    Sincerely,
    - Brenden

  • I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

    For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
    SOLUTION:
    Iam pointing t0 windows7 os.
    1) go to control panel
    2) open hardware and sound
    3) In that open Devices and printers
    4)In that u can find Apple Iphone.
    5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
    6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • HT201441 please help me try to contact the owner of this phone IMEI ****  ICCID **** i got his phone now with me but i dont know how to contact them first time

    please help me try to contact the owner of this phone IMEI ****  ICCID **** i got his phone now with me but i dont know how to contact them first time i got it low battery contact me
    I will explan more how i got this phone
    Call me +**** Micky Thai
    <Personal Information Edited By Host>

    A long shot but you might try using the phone to send an email to the phone asking the owner to call their mobile phone.  If the owner has a computer they may get the email and get in contact with you.
    But Roger's suggerstion of turning it over to the police is the best bet.
    OT

  • My phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    my phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Please help! I do not see the songs on my iphone when it's connected to my computer .  I want to transfer the songs back / forth.  thanks in advance.

    Please help! I do not see the songs on my iphone when it's connected to my computer in Itunes.  I want to transfer the songs back / forth.  thanks in advance.

    iOS 7.1 update requires approximately 350MB's of storage space.
    Tap Settings > General > About > Available to see free storage space.
    Very important to never allow the free storage space to fall below at the very least 500MB's or your iPhone may not boot.
    You need to free up storage space on your iPhone for future updates as well.
    Help here >  6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch

  • Please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • Please help. When I click on the download folder then MBP crashes

    Please help. When I click on the download folder then MBP crashes

    I see. Not good.  Does this happen when you click on it in the Dock?  What about in your home folder? What about in the Finder sidebar?
    Standard troubleshooting things to try:
    * Hold command-r while starting up to get into Recovery Mode.  Run DIsk Utility and "Repair Disk".  (This is probably a good idea in any case because of the possible disk errors which could accumulate due to all the freezing.)
    * Hold shift down while starting up to get into Safe Mode. Does the bad behavior persist while in Safe mode?
    charlie

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • TS3694 Please help iphone can't start up,the masage say error 1611.can you show me how to fix this .Thak you

    Please help iphone can't start up,the masage say error 1611.can you show me how to fix this .Thank you

    My iphone can't start on the screen say itune ,I go to itune try restore but the massage say error 1611.
    Mobile device not sevice.when i turn omy iphone it can't statr but only the Apple picture show on screen.can you guy try help me Please.Thank you

  • I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I live in South Africa, and I had the same problem with my iPhone 4.
    After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
    ***** that i cant use Find my iPhone, but atleast i can use my phone.

  • I keep getting an error message when I try to sync my new iPhone5s to iTunes. It says my computer is not authorised. When I authorise it and try and sync again, the same error message appears. help?

    I keep getting an error message when I try to sync my new iPhone 5s to iTuines.
    It says my computer is not authorised.
    When I authorise it successfully, and try and sync again, the same error message appears.
    Help?

    Hello Chad176
    If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for