Please Help in Joins and content tab (BMM Layer).
Hi all,
I am a newbie in OBIEE. I am working on a project in our organisation for existing database schema in oracle. We are planning to use OBIEE for reporting purpose.
Here's my problem.......
I have Three dimensions and Two Fact tables in my schema.
out of these one dimension is conformed Dimension.
Product_Reporting_Line, Geography, Policy_Cover_Type are Dimensions and ClaimFact,*PolicyFact* are facts.
Product_Reporting_Line is joined to Claim Fact and Policy_Cover_Type is joined to PolicyFact..
Geography is joined to both Claim Fact and PolicyFact.
Here's how it looks.....
Product_Reporting_Line-----< Claim Fact >-------Geography--------< PolicyFact >-------Policy_Cover_Type
I have a report in which columns from all the tables have to be taken.
In the Fact tables F1 and F2, there are some columns for which aggregation rule is not set (varchar Data for example Claim Number from ClaimFact and Policy Number from PolicyFact).
How should I design BMM layer. I want to know how the content tabs should be set.
Can anybody suggest me how should I do this?
Edited by: LavaRider on Jul 12, 2010 6:12 AM
Hi Kart,
I didn't do it the other way, I did it the the way you suggested me..
I have set the content for the Policy_Fact LTS to the Total level of Product_Reporting_Line dimension.
also I have set the* content* for the ClaimFact LTS to the total level of Policy_Cover_Type.
When I set the level *(Level tab of logical columns properties)* of Measues to the total level then it works....
i.e.
I have set the levels of the logical columns of Policy Fact table to the total level of Product_Reporting_Line and also set the levels of the logical columns of Claim_Fact to the Total level of Policy_Cover_Type.
I want to ask you Do we have to set the content in the LTS as well as in the Level (tab) of the measures?
Thanks for giving your precious time for me, I really appreciate that
Similar Messages
-
Please help VSt folders and contents got all messed up
Hi I hope someone can help me The problem started when i installed live 5.2 there was a conflict and it would nt read the plugins now I done know what i did but I got my self in a mess can anyone tell me where the folders are suppose to be located and what should be in them . I know not all of the Plugins are compatible on my MBP but I knw some should showing up . All I GET is the aple ones the wave arts one I bought and that is it any help to fixing this is a ppreciated
done
-
I ordered mac OS and I got the email for License and I didnt get the attachement for content code. Please help me getting the content code.
It's a two email process, one email has a locked pdf with the redemption code. The second email has the password to unlock the pdf. They come separetly, so you may have to wait for the 2nd to arrive.
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.
Playlists only exist as part of the larger iTunes library listing so if you are not seeing it there it doesn't exist anywhere else. I know with my older version of iTunes it is very easy to accidentally delete a playlist. With newer versions it may be possible to recover it with the undo feature in the menu but this likely will only work immediately after the deletion.
-
PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
Dear Adobe Community,
I got my first imac a few days ago, and i decided to install Adobe CC.
When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
And I also have a problem with Premiere, when i want to export a project says that premiere must close.
This is the try version, is this a problem of Adobe or Apple? i'm very worried
Help!
Thank you!
IvanaMuchas gracias!!! Ha funcionado!
El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Confirma que se trata de una cuestión de permisos.
Por cierto te aconsejos actualices la 9.1 a 9.2, posiblemente se habría arreglado así también.
Bueno los pasos son:
2. Select Go from the Finder Menu.
3. Select Computer.
4. Select Macintosh HD.
5. Select Users.
6. Select your user profile.
7. Right click on user profile. Select Get Info.
8. Go to bottom and unlock with admin password to make changes.
9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
Creo que no se necesita traducción.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
ITunes only shows "Setting" and "Contents" tabs - where's Music?
Am I missing something? I only have Settings and Contents tabs in iTunes for my shuffle. I want to sync some playlists to my shuffle - how do I do this?
I tried using Autofill for a smart playlist that contains podcasts, but I just get the "no songs in the playlist 'Podcasts' can be synced".mmmiles B wrote:
Am I missing something? I only have Settings and Contents tabs in iTunes for my shuffle. I want to sync some playlists to my shuffle - how do I do this?
That's all there is... you can either drag and drop playlists to the contents tab or use autofill by selecting the playlist to auto fill from.
I tried using Autofill for a smart playlist that contains podcasts, but I just get the "no songs in the playlist 'Podcasts' can be synced".
You CAN'T use autofill for podcasts (and audiobooks) . Drag and drop is
the ONLY way... -
IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE
iPod not recognized in 'My Computer' and in iTunes for Windows
-
I want to be a good SAP user but please help me how and can i do the right step about SAP
i want to be a good SAP user but please help me how and can i do the right step about SAP
Hi,
you can start learning SAP from an end-user/key-user perspective with the online learning portal of SAP Learning Hub, business user edition.
Further information can be found here:
SAP Learning Hub
Regards,
Arnold -
Please Help - Time Capsule and External hard drive Issues
Recently, I switched from Comcast to AT&T uverse as my internet provider and I started experiencing problems.
(1) I have a 4th generation Apple Time Capsule which I am using as my router.
(2) Connected to the Apple Time Capsule - USB - is an external hard drive (not for backup with Time Machine.)
(3) I have a 2011 Macbook pro which I use to access my file on my time capsule and external hard drive.
(4) I had been using my AT&T portable Hotspot from my cell phone to get internet access on my MacBook pro from remote locations to gain access to my external hard drive which is attached to the time capsule.
(5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
(6) Under Network I switched to bridge mode.
(7) And since August 2, 2014 my time capsule has not been backup.
THE PROBLEM - I need to be able to use the hotspot function from my cell phone to gain access on the external hard drive using my MacBook Pro which I was able to do before. Now it is showing time capsule under finder but unable to connect.
Do I need to reset my Time Capsule since I have a new service provider. Everything else works fine - meaning able to get internet signal but unable to access my external hard drive and backup my time capsule. Please HELP.(5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
(6) Under Network I switched to bridge mode.
(7) And since August 2, 2014 my time capsule has not been backup.
If you got ATT to turn off router function in their modem..
Then 6. is wrong.. You cannot have the Network switched to bridge mode..
You must have it set to dhcp and nat.
That is also why you cannot backup.. the TC is off the network.
Please change back to router mode in the TC.
Ensure the internet tab shows dhcp and you create a wireless network.
Then power down the TC... power down the ATT modem.. wait about 20min (you can try 5min.. but it might not be long enough).
Power up the ATT modem.. wait 2min for things to flash lights in de right blinkin order.. then start the TC.
Open the airport utility and make sure your TC captured the public IP and is now working as the router.
That should fix that end of it.. the hotspot end??
Tell us what happens. -
Please help on the Loader.content to movieclip
Hello there,
I have been search around and got some mixed solutions,
summarized as follow:
If I need to load external swf into the main swf file, I need
to Loader with appropriate URLRequest for this purpose.
After loaded, you can listen to the complete event and
addChild the loader.content to the main swf.
Because I have a stop on the loaded swf first frame, I need
to start the swf with a button. Some solutions on the net pointed
that to make this happened, you need to cast the loader.content to
MovieClip and have to through a tricky way to accomplish it like
var movie:*=loader.content ;
var clip:MovieClip=movie;
clip.gotoAndPlay(4);
I tried this method and still got Type Coercion failed
::cannot convert flash.display to MovieClip
Please help, don't know why some experts said it is working
while I can not get it to work. Thanks in advanceThanks WL, you are very close. I have a flash8 movie (purely
animation)
and I actually opened it in CS3 and saved as CS3. after
publishing that's the movie I am tring to load.
I recreate the whole animation in CS3 and everything start to
run as supposed to. By trace the loader.content I find out one is
[object AVM1Movie] for sudo as2 movie and [object MainTimeline] for
the pure as3 movie. Thanks again. -
Please Help! Drag and drop does not work in Adobe AIR 3.1 (FlashBuilder 4.6)
I am working on a PC is made of air and flashbuilder 4.6.
Drag and drop application does not work in Flash Builder 4.6.
However, the same source will work with Flash Builder 4.5.
Please help me.
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
backgroundColor="#323232" width="100%" height="100%"
initialize="init(event)"
nativeDragEnter="onDragEnter(event)"
nativeDragDrop="onDragDrop(event)">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected function init(event:FlexEvent):void
addEventListener(NativeDragEvent.NATIVE_DRAG_ENTER, onDragEnter);
addEventListener(NativeDragEvent.NATIVE_DRAG_DROP, onDragDrop);
private function onDragEnter(event:NativeDragEvent):void
if (event.clipboard.hasFormat(ClipboardFormats.FILE_LIST_FORMAT))
NativeDragManager.acceptDragDrop(this);
private function onDragDrop(event:NativeDragEvent):void
var arr:Array;
arr = Array(event.clipboard.getData(ClipboardFormats.FILE_LIST_FORMAT));
startImage.source = (arr[0] as File).url;
]]>
</fx:Script>
<s:layout>
<s:VerticalLayout/>
</s:layout>
<s:BorderContainer id="bc" borderStyle="solid" width="200" height="80%"/>
<s:Image id="startImage" width="100%" height="100%"
horizontalAlign="center" verticalAlign="middle"/>
</s:WindowedApplication>Thank you answers, but it was not the answer I wanted.
[Problem]
* Flash Builder 4.5.1(updater) or Flash Builder 4.6
- If you have installed on pc, does not work adobe air drag and drop
[Solution]
1. Reinstalling the Windows 7 (32bit).
2. Install Flash Builder 4.5.
3. Flash Builder 4.5.1 updater and Flash Builder 4.6 does not install.
(Instead of using Flex SDK 4.6 is set up)
In addition, Windows7 64bit environment does not work drag and drop.
Is there another solution? -
Please help me download and install Flash Player!
One day, I had no problems viewing Flash on my computer. Then
one day last week, it told me I needed to download Flash Player 8
to view The Vine on E!Online. I haven't been able to download Flash
Player 8 or 9. Or anything from this site, for that matter.
I went here (
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash&promoi d=BIOW),
clicked download. Clicked the yellow strip that appeared to install
the Active X control or whatever it's called. A pop-up asked if I
wanted to install or do not install. I clicked install, then
nothing happens. No download box shows up or anything.
I've un-installed my flash player (if i even had one) and
have tried so many times to download a new flash player.
PLEASE HELP!ive uploaded the exe file to my server, so
go
here and save it to your comp, unzip the file, and run the
program. -
Hy please help...
My husband purchased an iphone at xmas and evrything was fine until i purchased 1 yesterday . We both use the same email address which is linked to our itunes account (ithink) I registered mine yesterday and all my husbands contacts came on to my phone, so i deleted them and he lost them all on his phone :-( now if he adds or deletes anything i get it or the other way round please please helpIf you are saying that you both have iCloud accounts and use the same icloud ID, then yes, the contacts will be deleted. The idea is that all devices using the same icloud ID are kept in sync. You need to use different IDs. You can keep the same iTunes ID so you can share the songs and apps. But use different icloud IDs.
-
Please Help- IPod Classic and Mac/Itunes
Hi all,
I'm new here because I have a bit of a problem. Please forgive me for my lack of general computer/Ipod knowledge...
I purchased my MacBook about 4 1/2 years ago. I'm not sure exactly what model I have, but the age should help you determine that.
I also purchased my Ipod about 5 years ago. I think it's the first "video" Ipod that came out. It's 40 Gig, white, and pretty basic.
I've taken exquisite care of my Ipod because I'm just interested in putting my new CD's on it, and taking it with me in the car so I don't have to lug around 40 CD's all the time.
Anyway, for the last 2 years or so, my process of putting new music on my IPod was as follows:
1. Open Itunes
2. Import CD
3. Hook Ipod up to the USB port (my Ipod is not synched)
4. Click and highlight the new CD and drag it to my Ipod
5. After updating, disconnect my Ipod
6. Delete CD off of Itunes libary
This has gone off without a hitch for quite some time.
The other day, I went through this exact process, as I've purchased a new CD, but I had an issue.
After I plugged my Ipod in, Itunes recognized it, as usual. But, on the Ipod screen, it continued to flash "do not disconnect." After a half hour of waiting, it didn't go away. I tried to drag the new songs to my Ipod like usual, and then disconnect, but to no avail.
In the past, when I hooked up my Ipod, after about 20 seconds, the "Do Not Disconnect" screen would disappear, and take me to my main menu (on the Ipod).
Now, that screen doesn't turn off, and I can't get new songs onto the device.
Please help...I'm not very good with any of this, and would very much like to hear my new music.
Thanks for your help!
Jeffhold the menu and middle buttons down together until the screen on the ipod goes blank. that restarts it then try your normal process again
Maybe you are looking for
-
App-V 5.0: Adding Visio 2013 and Project 2013 to a previously deployed virtual Office 2013
Good morning. I can successfully deploy Office 2013 via PowerShell and App-V v5.0 without difficulty. I've read the document at http://support.microsoft.com/kb/2915745/en-us and followed all instructions successfully. My question is this: If Office
-
I don't know how to give any more details than I have. Although there is an icon labeled Firefox 4.0.1 dmg in the dock (It is a square kind of thing that looks like a piece of paper with the upper right corner turned down with a smaller square inside
-
Iweb Hyperlink Format not working!
Hello, I am using version 3.0.3 of iWeb. I think this must be the latest version. No matter what I do, I cannot get the FORMAT tab to do anything within the hyperlinks section of the inspector. Let's I want to change the color of how a button behaves
-
How to unlock my iPhone once it is disabled, How to unlock my iPhone once it is disabled
A little kid locked my phone to where it says hook up to iTunes, I did that and it asked me to unlock my phone. I obviously can't do that since that is not an option. I need help!!
-
Hi Guys, When I am executing MR11 , I am getting the error message that For object RE_BLEG the Number Range 04 does not exist. Why does it occur and can anyone tell me where I can adjust this. Thanks Srikanth