Please help :- Line Feed at end of line
Hi,
When i uses this class :- CLASS cl_abap_char_utilities DEFINITION LOAD. and this constant :- CONSTANTS: c_cr_lf TYPE c VALUE cl_abap_char_utilities=>cr_lf. it will give me a line feed when i open my report in excel file but not in text file.
The reason i uses the above is becoz i dont want the line to be truncated if its space at the end of the line. If i download my report into a txt file, i wont see the line feed but when i save the file as txt file and then open with excel, it will show me the line feed. How can i solve this where i can keep the space at the end of each line and not showing the line feed when i open with excel ? Anyone can help ??
HI,
sort gt_itab01 by MATKL.
LOOP AT GT_ITAB01 INTO GS_ITAB01.
AT END OF MATKL.
SUM.
MOVE-CORRESPONDING GS_ITAB01 TO GS_ITAB02.
MOVE GS_ITAB01-MENGE TO GS_ITAB02-MENGE1.
APPEND GS_ITAB02 TO GT_ITAB02.
ENDAT.
CLEAR GS_ITAB01.
ENDLOOP.
rgds,
bharat.
Similar Messages
-
Please help me regarding AT END OF
i wan to get GT_ITAB02 from GT_ITAB02 with some logic
where can i add logic to calculate movement type logic?
if there is no requirement of menge2, i can do as below;
so so difficult to me for menge2 and sum movement type each other .
Please help me!!
LOOP AT GT_ITAB01 INTO GS_ITAB01.
AT END OF WERKS.
ENDAT.
AT END OF MATKL.
SUM.
MOVE-CORRESPONDING GS_ITAB01 TO GS_ITAB02.
MOVE GS_ITAB01-MENGE TO GS_ITAB02-MENGE1.
APPEND GS_ITAB02 TO GT_ITAB02.
ENDAT.
CLEAR GS_ITAB01.
ENDLOOP.
GT_ITAB01
WERKS MATKL MATNR MENGE BWART MEINS
============================================
1100 100 100001 100.00 101 KG
1100 100 100001 50.00 102 KG
1100 200 100002 150.00 101 KG
1100 200 100002 20.00 531 KG
1100 200 100002 10.00 532 KG
1200 300 100003 100.00 101 KG
1200 300 100003 50.00 531 KG
in case changing value of WERKS or MATKL
GT_ITAB02-MENGE1 = BWART 101(+) 102(-)
GT_ITAB02-MENGE2 = BWART 531(+) 532(-)
Rusult GT_ITAB02
WERKS MATKL MENGE1 MENGE2 MEINS
============================================
1100 100 50.00 0.00 KG
1100 200 150.00 10.00 KG
1200 300 100.00 50.00 KGHI,
sort gt_itab01 by MATKL.
LOOP AT GT_ITAB01 INTO GS_ITAB01.
AT END OF MATKL.
SUM.
MOVE-CORRESPONDING GS_ITAB01 TO GS_ITAB02.
MOVE GS_ITAB01-MENGE TO GS_ITAB02-MENGE1.
APPEND GS_ITAB02 TO GT_ITAB02.
ENDAT.
CLEAR GS_ITAB01.
ENDLOOP.
rgds,
bharat. -
Hello, i was trying feedburner service but finally i decided to keep with my old feed. but when typing the redirection on the xml file by the <itunes:new-feed-url> tag i misspelled the feed address, i typed http:www.podcasts.ideasauditivas.com/podcast.xml, immediately after, i did a ping by the url phobos method, and now itunes is trying to read my feed on http://http:www.podcasts.ideasauditivas.com/podcast.xml, which obviously doesn't exist, is there a way to tell itms to read back from the old feed, instead of the wrong address i typed, actually the mp3 files are able to be listened on itms but theres no way anyone to subscribe.
misspelled feed: http:www.podcasts.ideasauditivas.com/podcast.xml (i asume itms reads it as http://http:ww.podcasts.ideasauditivas.com/podcast.xml)
correct feed: http://www.podcasts.ideasauditivas.com/podcast.xml
also correct: http://feeds.feedburner.com/Fusil-a-tIgnore the ping result. Go to your Store page, subscribe to your podcast if you haven't already, then go to the Podcast section of iTunes and click the 'i' button at the right-hand end of the line for the podcast title (not an episode). The pane which opens will show the feed iTunes is trying to use.
If it shows the old feed, you should remove the redirection tag and start again with the correct UTL.
If it shows the erronenous feed, I'm afraid you are stuffed: you have to modify a feed to change iTunes to another feed, so if you've got it looking for a feed at a URL you can't upload to, then you can't move it. Catch-22.
You don't want to hear this, but you will have to:
1. Click the 'report a concern' button in the Store page and request to have the podcast removed.
2. Submit the podcast again at the new feed URL - you will probably have to make a small change to the title otherwise you are likely to be told that the podcast already exists (even if it's been removed). -
Please help: My Feed is not updating in itunes,
We have 40 shows and now only 2 are showing. The feed validates and if you subscribe through itunes you can download all the shows. But for some reason itunes will not display individual shows http://feeds.feedburner.com
Sorry about that... Thanks in advance for your help
Actually Itunes has now started picking up all the shows again. But I would still like to know why we had the issue. Any ideas? Thanks
In itunes http://itunes.apple.com/us/podcast/cycling-360-media/id431852609
Feedburner feed pointing to itunes http://feeds.feedburner.com/Cycling360
Feed pointing to feedburner http://www.cycling360media.com/?feed=rss2 -
Please Help: Submitting Feed
Hello,
I recently submitted my podcast feed but got it rejected because there were many things wrong with it. I have fixed all of the problems and tested it out and everything looks great. When I try to submit the feed again it says the feed was allready submitted. How can I submit my new and improved feed?
Thanks!Your feed validates, and I can't see anything wrong with it. I just subscribed to it in iTunes and it worked fine, downloading the episode. There is currently no obvious reason why there should be a problem: but the fact that you were unable to get the episode to download suggests that perhaps the server was not responding at that time. Certainly a failure to access the media file would get your podcast rejected.
I don't know anything about blubrry.com - you could ask them whether there has been any technical problem. You do need a reliable server if you're going to run a podcast.
You should check it immediately before re-submitting to make sure it's working: you may be told that a podcast of that title has already been submitted (this is a minor bug in the system) in which case you will need to make a small change to the title - you can always change it back once it's been accepted, provided that changing the title doesn't change the feed URL (as for example it would in iWeb), so that's something you will need to check. -
Please Help-At Wit's End!
Here's the deal. I just got my iPod Touch Gen 1 back after getting a new battery put in it. When I tried connecting to iTunes, the Touch does not show up in iTunes. My computer does not recognize the device.
I did everything I read to do: I uninstalled iTunes and all Apple programs. Even extracted the Apple Mobile Device USB Driver from the iTunes setup file and installed it into my laptop. I still cannot get the iPod Touch to be recognized by my computer. I have 2 computers at home and the iPod is not recognized by either.
I did re-format both computers this past week, if that matters. I am totally stuck now and would greatly appreciate help.Come to find out, it was just the usb cable! I had purchased an new one (not an Apple) because I thought maybe the original was no good. The non-Apple usb cord didn't work either.
Today I took the Touch to the local Apple store and the guy there tried connecting my device to his computer with my new cord but it didn't work. But when he used a new Apple usb cable, it did work. So I had to buy one-expensive!
I didn't know that only Apple usb cords work!
Thanks all for your responses! I am happy to have the Touch back to 100% health! -
404 Not Found
nginx -support.mozilla.com : server does not support RFC 5746, see CVE-2009-3555
Warning: Error in parsing value for 'display'. Declaration dropped.
Source File: https://support.mozilla.com/en-US/questions/new?product=beta&category=b5&search=404+Not+Found+nginx+-+this+is+error+occured+while+surfing+for+any+kind+of+searching+sites%2C+please+help
Line: 0
Warning: Unknown property 'box-flex'. Declaration dropped.
Source File: https://support.mozilla.com/en-US/questions/new?product=beta&category=b5&search=404+Not+Found+nginx+-+this+is+error+occured+while+surfing+for+any+kind+of+searching+sites%2C+please+help
Line: 0Warning Unresponsive Script
* https://support.mozilla.com/en-US/kb/Warning%20Unresponsive%20script
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working. -
wi-fi has full bars, says i am conected but never puts a check by the name of network,i have reset settings and it still does the same thing. i dont think it is my wi-fi because my other computers are able to get on just fine. please help.
There are two ends to a wifi network. Try rebooting your router.
-
he download was completed the laptop was extracting the software and at the end of the loading line it writes an unknown error occurred (3194) please help me thank you
3194 = https://discussions.apple.com/message/18851577#18851577
-
I am currently facing trouble when trying to use the standard keyboard commands such as Home/End/Page Up/Page Down on Firefox.
The browser does not respond to the same.
Even the arrow keys take some time to elicit a response.
Please help.You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing]: press F7 to toggle<br />
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"<br />
See http://kb.mozillazine.org/Accessibility_features_of_Firefox<br />
See http://kb.mozillazine.org/accessibility.warn_on_browsewithcaret<br />
In Firefox 3.6 and later versions you can disable the F7 shortcut that toggles caret browsing by setting the pref accessibility.browsewithcaret_shortcut.enabled to false. -
I recently bought a 8800 and when I inserted a battery, all I got was a battery symbol with a red line through it on a dim screen. I changed batteries, tried to charge it via USB and from a wall outlet to no avail. I tried cleaning the contacts and tried uploading t a new OS, but it wont recognize the phone being connected when it actually is. I am at the end of my rope with this phone and can't figure out what else to do. Is it just gone? Please help me
Solved!
Go to Solution.Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying
If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
Steve -
hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advanceSharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help meYes I did everything that I was instructed to do!
Cheers
Joyce -
Hi all,
Please help, I repaired an iphone 5c and have now tried two different lcd screens on it but all I get is a black screen or a black screen with a vertical blue line on the left hand side of the screen. I definitely have the cables connected properly etc and before I repaired it the phone had a cracked screen and there was a picture on it.
I have tried hard reset and nothing. I have tried connecting to iTunes but it asks me to confirm on the iPhone which I can't do as there is nothing on the display. I have tried randomly pressing all over the screen but it doesn't work. So I can't even try restoring it on iTunes.
Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
Thanks.purplesunshine3 wrote:
Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
Thanks.
Since you were successful the last two times, I'm sure you will figure it out.
Maybe you are looking for
-
Hi, I am new to SAP and was trying to do a Goods Issue after creating a delivery. When i click on Goods Issue from the delivery document, I get the message " Storage Location not defined for delivery item 000010" When I try to go to picking overvie
-
Individual profit center wise report
Dear experts My client want to implement 10 profit centers in 3 different profit center group.& they want separate P/L Statement and balance sheet for each individual profit center & also they want group wise .am new in CO please suggest me Re
-
Updating accrual value via extended rebate processing
We have a requirement to use scaling conditions for a customer's rebates. Scaling will be used to accrue against billing documents. The rebate will be reviewed weekly, and there will be weekly settlement. This I believe is standard and simple to achi
-
How to clean old safari bookmarks
Hi, is there a fast way to clean old safari bookmarks, broken, duplicate, etc? Any free or cheap app? Thanks.
-
Getting error while starting managed recovery
Hi, I am getting error while starting managed recovery.Please suggest. Please find below error log ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION Attempt to start background Managed Standby Recovery process (OTP3) Wed Jun 23