PLEASE HELP! LIVE won't work in LOGIC anymore

Hi,
This is my problem:
I happily worked on my MacBook Pro (2.33 GHz Tiger 10.4.11) for a long time, using Ableton LIVE as a ReWire slave to LOGIC and everything worked just fine.
I recently got myself a Mac Pro (2 x 3.2 GHz Quad-core 4 GB RAM) and on which Logic seems to be running fine by itself (as does LIVE), but as soon as I open any of my documents created on my laptop (files that were created in ReWire mode) there seems to be a latency issue, as in some of the tracks don't quite play on time and then when I quit LIVE it crashes and LOGIC crashes a couple of seconds after that too.
This happens also when I open an empty LOGIC file and start LIVE - again empty. A weird thing I noticed is that LIVE doesn't seem to crash when I quit, if I haven't pressed play. Only after playing something either in LOGIC or in LIVE do I get the crashes.
If anyone has got any suggestions for this I'd be SOO grateful - I've been searching the internet and forums all day and can't seem to find any answers for this weird problem ... Could it be something to do with Leopard?
PLEASE HELP!

Also, Connection Doctor says I'm connected to the
internet just fine.
The Connection Doctor in Mail should list your email accounts and whether it can access them.
Sounds like Mail has gotten confused about your .mac password. In Mail, go up to the menu bar Mail, go down to Preferences, select your .mac account and re-enter your password under "Incoming Mail Server".
You may also have to re-enter your password under "Outgoing Mail Server" also.

Similar Messages

Please help - iMessage won't work

So I updated my phone today like I'm sure a lot of you did and I tried going in to activate my iMessage, I've tried it for hours and even reset my phone and it won't work. I know my id and password are right and my connection to my wifi is good but every time I do it it pops up after about 30 seconds of trying and says "could not sign in. Please check your network connection and try again"
Someone please help ... What do I do? My date & time thing is already set to on as I previously read.

If you are having trouble with SMS messages, then you would need to address that with your carrier, unless you are receiving them and just not get a notification. If you have followed the steps I gave you for iMessage and you are not receiving notifications, then check the settings for Notification Center. If you have Messages set to show on the lock screen and play a sound, and display a banner, etc. then your next step is a restore. First restore from a backup, and if that doesn't work, then restore as a new device. Restoring the phone will result in the loss of all data. Make sure you have backed up the phone, synced all content and imported photos to the computer.

Please Help--It Won't Work At All!!!

Today when I was using my iPod, the battery went completely down, to the point where I had to charge it. I plugged it into the computer, and iTunes didn't come up. So I took the USB cable out and plugged it back in. Still didn't work, so I manually brought iTunes up. My iPod is all black, and nothing works. On iTunes, it doesn't give me the option to sync my iPod. The battery is totally drained, so I can't toggle it or reset. Can someone please help me??!!??!!
Kellie

Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

Hello to you all,
My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
Please, should you have any solution please send me the details to [email protected]
Thanks you a millionh times.
Al.

The MBA seems to cause several problems to several users on boot ups
On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

Hello Please help me I have worked erased IPhone exists with me But did not finish the process erased What is the solution??

Hello
Please help me
I have worked erased
IPhone exists with me
But did not finish the process erased
What is the solution??

Post in your native language, the above make not sense.

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

Apple Remote won't work with Logic

I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
I've searched the Internet and am finding little on this topic.

Error 213.5 Please help me get DW working again. Thanks CaptJim4685

I have a Mac OS 10.10 used the Migration Assistant to move all files from old computer to new computer yesterday. Now can not use my Dreamweaver CS 5.5 program I have my original install disk. Tried that. get error 213.5 Please help me get DW working again. Thanks CaptJim4685

Hi Nancy O.
Thing is, I was using it on my old MacBookPro, also w/ yosemite. No problem. So I think it should run on the new one with the same OS.
I did figure out how to find the CC cleaner log file. It had a lot of stuff in it, but did not indicate any kind of failures. I did not see the word “failure in the log file at all.
After your suggestions, I went thru all the steps again - twice - very carefully emptying the trash between steps and restarting. Got the same error message at the end.
Now, I still have 5.5 working on the old computer. That was my first and only install. My notes suggest I installed it in 2011.
If I knew for sure that if I deactivated it (if I knew how to do that) on the old computer, and uninstalled it, AND I could then count on the install working on my new computer, I would do it, but I am afraid to do that for fear that then I wouldn’t have it to use at all.
I had expected it to transfer over, and then I would clean the old computer, as my son wants it for his wife, They have no use for DW.
I also had trouble w/ MS Office, but they allowed me to call them and get a new install code. Now that Works fine.
I wish Adobe were as accommodating. I have my original install disk & code. I never expected any of this trouble.
I hope you can come up with a new plan. I really can’t afford to buy a new copy, especially when I know that this one should work, if it would just get rid of this blocking action.
I only use it for editing my own personal family website: http:www.americanfenner.com. I am not a webmaster/webwriter/ computer programmer or anything like that. Just an old guy doing personal stuff on my mac.
Jim Fenner
[email protected]

HT4906 hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

hello, my hard drive broke. I purchased a noew one. Now I have no access to Iphone or any of my old apps. even after I reldownload them. Please help. Important fro work.

Not ure what this has to do with iPhoto. Perhaps you'd be better off asking on the forum for your MacBookPro.

Help, Please. .f4v won't work in browser?!?

I am a newbie and trying to design my own site so please don't laugh too hard if this is an easy question.
I just created a site using Flash CS4 then published to Dreamweaver CS4, then published to server using Dreamweaver via FTP. All files seem to be on server ( .swc, .fla, .html. f4v, .flv) but .f4v video won't playback on the internet.
more info:
video plays fine in Flash when testing movie and video works fine when checking in browser with Dreamweaver. Do I have to point to the video some how? I have tried everything that I know, please help.
Thank you in advance.

I should have mentioned I use GarageBand 2009. I've read other posts all over the web where people have trouble with this Tascam US122 but with the older Leopard versions. I had no problem with ordinary Leopard 10.5.6 - it's only since I upgraded to Snow Leopard, and it's only in GB.
I've tried a powered hub which has helped others, but doesn't help with my problem.
I reallly only want to know which driver/drivers are the problem.
Then I can work out a solution, even if it means buying a new interface. So long as I can't identify what the problem is, I'm not prepared to buy new equipment that might make no difference at all.
Bad luck with your electronic drums macuserrich - it's annoying isn't it!!!!

Please help - AppleWorks won't open. The icon just bounces in the Dock.

I have been writing and saving all day on Appleworks. Now when I want to open up an Appleworks file, it won't open up. I tried clicking it from an icon on my desktop, clicking a file from my Recent Items list, and getting one from my hard drive. Nothing opens up. I tried turning off my computer and restarting it and it still will not open any Appleworks file. The Appleworks icon at the bottom bar of my computer just bounces up and down, but nothing opens up. I am able to open my iWorks Pages files without any problem. The bad thing is that I need to get my saved Appleworks files and edit them. Please help... Thanks in advance, Teachermom99

Welcome to Apple Discussions
When an application stops working as it should, it's likely due to corrupt preferences. You can follow the steps in this user tip or use the reset function of Dale Gillard's Sidekick.

Please help, CS3 won't run with 10.5.2! Please!

Installed 10.5.2 on my g5 dual 2.5 w 4.5 gigs ram (NOT) intel. Now my AE projects won't run. One started to and then quit. This is major for me. Involves dozens of projects. Please help.

Yes, my powerbook is also trouble-free.
But it's just too slow to run AE on.
And yes, yes, I did repair permissions. I did everything including a "safe" starup, repair permissions many many times, etc. etc. etc.
I'm beginning to think the problem with AE was with non-ae plugins. But then why did automator and software update cease to work?????

Please help! All keys work except the letters!

Hi all! I have a 2011 MacBook Air. I went to use it this moring and login, and the keys didn't work. I have found that all keys EXCEPT the letters work! It has Mountain Lion 10.8.2 on it, 64GB flash HD, 2GB DDR3 RAM, the "base" model esentially. Any ideas? Thanks!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

Please HELP, "iTunes has stopped working" error after connecting iPod video

People please help me out! I have a Razer Blade gaming laptop with Windows 8 64bit.
I have an iPhone 5, iPad 2 and an iPod video (80GB). I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video. I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
Procedures that I already tried and that were unsuccessful to solve the problem:
Uninstall Quicktime
Uninstall iTunes and reinstall
Reset the iPod (several times)
Delete TEMP files on computer
Restart the computer (several times)
Use a different cable and a different USB port
The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors. My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
Thanks very much!

It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

PLEASE HELP! LIVE won't work in LOGIC anymore

Similar Messages

Maybe you are looking for