Please help me to correct the Variable exit
Hello,
I am trying to calculate the previous month from the user input 0CALMONTH variable 0I_CALMO. I have created another variable ZVPCALMON and have restricted a key figure Amount with this variable.
I have written the below code. When I debug the query I am able to get below in E_T_DATA
Sign -> I
OPT -> EQ
LOW -> 200508
when I enter the variable 09/2005 but I dont get the data in the report. However when I run the report without restricting the keyfigure with ZVPCALMON and input the calmonth as 08/2005 I am able to get the data.
IF i_step = 2.
CASE i_vnam.
WHEN 'ZVPCALMON'.
CLEAR : l_s_range,
l_month_low,
l_year,
w_var_range.
LOOP AT i_t_var_range INTO w_var_range WHERE vnam = '0i_CALMO' .
l_year = w_var_range-LOW(4).
l_month_low = w_var_range-low+4(2) - 1.
IF l_month_low = 0.
l_month_low = c_12.
l_year = l_year - 1.
CONCATENATE l_year
l_month_low INTO l_s_range-low.
ELSE.
CONCATENATE l_year
l_month_low INTO l_s_range-low.
ENDIF.
l_s_range-sign = c_sign_i.
l_s_range-opt = c_range_opt_eq.
APPEND l_s_range TO e_t_range.
ENDLOOP.
WHEN OTHERS.
ENDCASE.
ENDIF.
I think I am missing something. Could anyone suggest what could have been wrong.
Thanks,
KK
Hi KJ,
Thanks for the reply. I don't know why but a simple offset doesnt work either. I have restricted the key figure with 0CALMONTH Variable and put the offset '-1' but still I dont get the result. Thats the reason I have gone for the variable exit.
thanks,
Kalyan
Similar Messages
-
Please help me to correct the script
I try to write a script by my slef, but not work
app.findGrepPreferencest = firstLineIndent:8, leftIndent:8;
app.changeGrepPreferences = firstLineIndent:8, leftIndent:16;
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
Can someone please help me to correct the script, please.both two script are working
but waht if I change the script into this format?
function(){
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "8 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "16 mm";
app.selection[0].changeGrep();
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "16 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "24 mm";
app.selection[0].changeGrep();
and then so on,
Can it works? -
Debugging the variable Exit - EXIT_SAPLRRS0_001
Hi Guys
Not sure how to debug the variable exit with setting break point.
I need to check if my variable it correctly populated after written code in ZXRSRU01 .
Any help will be awarded.
Thanks in advance
KirkHi Kirk,
after When'Data Source'.
Write : <b>BREAK-POINT</b>
Save and activate the code and execute the report. Provide required input and execute. It will go into debugging more.
Dont forget to remove the "break-point" before transporting to Quality/Production.
Hope it helps. -
Please help me to know the answers
Hi ALL,
Please help me to know the answers
What is the role of the container element in BPM?
What is the difference between Idoc and RFC adapter ? How to decide which one will be used?
How to restart the adapter engine or J2ee engine?
What is the role of wndows1 and windows2 in SXMB_MONI?
Is it possible to see the message after mapping ?If it is possible how to check?
Regards,
SomenathHi somenth,
What is the difference between Idoc and RFC adapter ? How to decide which one will be used?
A)in case of sender idoc means Sender IDOC adapter need not be configured because IDOC adapter
lies in ABAP engine - IDOC adpter resides in Integration engine.
Incase of receiver, whatever is the adapter, you need an adapter configuration and receiver
agreement - from the IE, the xml msg need to be sent to pipeline of idoc adapter,
so you need a recever agreement......
IDOC #
Idoc Adapter: The next most commonly used adapter is Idoc adapter for sending and receiving Idocs from SAP XI.
The foremost step before configuring the idoc adapter is the system settings that have to be done
Details:
In the case where we encounter a standard IDOC provided by SAP or Situation where a mapping is available or
an IDOC as well as a BAPI exits, the approach will be dependent on the specific integration scenarioo......
for For example, options might be
1) sending one IDOC at a time
2) combing multiple IDOCS and sending as a single IDOC.
3) making one single RFC call, for each business transation.
4) avoiding multiple calls to the same BAPI / RFC by deploying a wrapper BAPI and sending all records in one call.
5) Using the proxy and sending all data in one shot and making single calls to the BAPI from the proxy.
proxy and rfc adapter #
a proxy on the SAP application system should be used while interfacing with a standard BAPI or remote enabled
function modules on the application system. the proxy will be invoked by SAP PI/XI and on the application system
the proxy will call the BAPI. in SAP systems with WEB AS versions <6.20 the proxy option is not available and hence
the RFC adapter should be used insted.
Disadvantage:
pre-built meta data and the mapping that SAP delivers will not be usefull as the BAPI is wrapped with a proxy.
so if the pre-defined integration content is not taken into account the proxy should be used insted of configuring
the RFC adapter and calling the BAPI / RFC
Advantage:
it bypasses the adapter engine and directly interacts with the application system and integration engine thereby
enchancing the performance
2 )What is the role of the container element in BPM?
A)The workflow container contains an element which is defined with a data type reference to the same object type that is created in the referenced task, this binding definition is proposed automatically when an activity is defined.
If no element with an appropriate data type reference is available in the workflow container, a suitable element is added to the workflow container and the binding entered.
Defines the data for a business process and to enable data to be transferred between the individual steps of the business process.
consists of an unlimited number of container elements.
Container elements ( Variable declaration)
Consists of a name to address data in the process
Can be typed to
*Simple XSD ypes :XSD:data,XSD:time,XSD:integer, XSD:string.
*Abstract interface
*Receiver
*Can be multiline ( a vector of the types above)
3)How to restart the adapter engine or J2ee engine?
SMICM
4)What is the role of wndows1 and windows2 in SXMB_MONI?
Window1 and window2 will get you the message payload
we can check the messages in SXMB_moni
regards
srinivas -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
Please help me to solve the issue in my query.
Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0) -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
-
I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
Please help me ,i forgot the synchronising password for my mac pro lion backup disk
please help me ,i forgot the synchronising password for my mac pro lion backup disk
If the backup volume is encrypted, and you forgot the password, then you'll have to erase the volume and start a new backup. There's no way to recover the password.
-
Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
MrudualaYou are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo -
Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign. Please advise how to correct the name that it is saved under.
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37 -
I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website
Here's two popup test sites.
http://www.kephyr.com/popupkillertest/test/index.html
http://www.popuptest.com/ -
# Question
Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down). I tried to understand but different javascript file gets different Expires date value when it is being cached. Please help me as I tried lot and could not get proper answer for this. Thanks in Advance.Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.
Maybe you are looking for
-
Re-installed osx now iPhone see's iTunes as a "new" computer and wont sync
Help please:) I had a critical hard drive failure and had not backed up my data. After a clean install of osx on the same computer with the same hardware, I updated itunes to the latest version. (all fine so far). before the new install I had sync'd
-
My iphone keeps crashing and turning itself off.....even though battery life is fine...as soon as i plug charger in it comes bcak on....help very frustrating...3g
-
My appstore app is not working on my macbook pro?
my appstore app is not working on my macbook pro? It simply shows a piece of paper with a pencil, ruler and paint brush.
-
Can't open PDF files until I end Acrobat.exe process in task manager
I have Acrobat 9 Standard with all updates applied. Occiasonally when I try to open a PDF nothing will happen, turns out that I open the task manager and find that Acrobat.exe is still running. I end the process and then I am able to open the PDF fil
-
I've double tapped, gone left and can get my music through the apple TV but there is no mirror option to choose. What am i doing wrong? version 5.1.1 model MD057BT. Any ideas? Thanks