Please Help Not sure About Something!!!!!!!!

How do you get photos from 2 different folders?
When i get photos from a folder all that happens is get it from 1 folder if i try to get photos from another folder it will just say... deleting photos (at the top of the page when ipod is flashing red on the side of itunes) then it says updating ipod. So I just end up with photos from one folder and the other ones are gone. I know this is a stupid question but i'm only 12!

You can only update photos from one folder (but it can contain nested folders). You would have to put all the photos in one folder or make an iPod Pictures folder or something similar and put the pictures/folders you want in there. You could also put the two folders in one folder and then update from the one folder (that contains those two folders).
If you want to be able to update from multiple folders, tell Apple...
iPod Feedback
btabz

Similar Messages

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Boot Camp support:
http://www.apple.com/support/bootcamp/
Boot Camp FAQ:
http://support.apple.com/kb/HT5639?viewlocale=en_US

I did not activate the backup email. and I'm not sure about the answer security. Please help me!

I created a id apple. then I forgot to activate the reserve by email. I still remember my secret question, but I'm not sure about i was using accented characters or spaces. language in my country. That was my fault. I want to ask the apple support can assist me? . I tried to find it on the website but I do not speak much english for a call request. Do you can send email to me reactivated by email backup or help me answer my security question . My ipad is now locked and can not be used. Please help me !

Find someone who speaks english to help you and contact Apple. Good luck.

HT204350 hi all i porches apple macbook air model mc-234 serial number W80031NH9A7 but it dont save the cahrge i dont know the reason is here any body to help me please i thing there will not be battery inside but im not sure about it

hi all i porches apple macbook air model mc-234 serial number W80031NH9A7 but it dont save the cahrge i dont know the reason is here any body to help me please i thing there will not be battery inside but im not sure about it

Being a 2009 model, it is likely the battery is worn out. Take it to a service center and have the battery replaced.

Please Help me to understand something : |

Subject:please Help me to understand something : |
hi there ,
so i know to create apps in flash cs5 , i downloaded the adobe air 2.6 and installed . i downloaded Flash Professional CS5 Update 11.0.2 and Flash Professional CS5 Update for iOS
10/11/2010.
i read in adobe air 2.6 that it possible to make multitasking .
2 questions :
1.
it possible to make multitasking in flash cs5 ( open apps on iphone , click on home button and when you come back , apps not restat ) ?
i mean play sound in my apps , and when you click on the home button the sound stay played.
2.
adobe air , when i installed it , it work on flash cs5 auto? i need to change somthing?
in bigger , how i make multitasking in flash cs5?
please help me
thank you

Not sure what you mean by the second question, but the answer your first; yes, air 2.6 allows for multitasking. You don't have to do anything to get this to work, it is setup by default.

Still not sure about backing up, still not sure about backing up

Still not sure about backing up if apple provides a new i pad because battery has gone west. you must back your ipad info to something else, like your pc
as you cannot get to backed up material if you have sent it to apple, can you transfer that backup on ipad to the pc???

Not unless you're using the iCloud and you have a backup in iCloud and you're using a mac signed into iCloud or you have the iCloud control panel installed on your pc.
Or by chance you had a backup in iTunes.
If you can open iTunes you can check to see if your backup is there.
Click on Edit>go to Preferences> click on Devices, check for the device backups in the box. If they're not there, you can check to see if your information was in icloud by accessing it at www.icloud.com.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

I want my iPad to play over my car speakers I do not want a frequency transmitter device. Do I have any alternatives. I am not sure about adapters.

I want my iPad to play over my car speakers I do not want a frequency transmitter device. Do I have any alternatives. I am not sure about adapters.

I second what Thoma said. If there is the little headphone in, then you can buy a cord to plug the headphone out of your ipad into the input in your car.
Failing that, see if you can pair via blue tooth.
Or the fallback is an FM transmitter. I've used one of these for years. In fact, the one i use was meant to go with a MP3 player that broke years ago. They're very simple. the transmitter sends the music out of your ipad 'out' on a specified frequency (due to radio stations these transmitters often have many frequencies to choose from) you then tune y our radio to that specific frequency and you hear your ipad.
Occasionally, if you're driving cross country, you may need to tweak the frequency (if you get within range of an existing station using that same frequency) but they're very easy to use.
I often take motorpool cars, so I just carry with me the transmitter and a 1/8-1/8 cord and I'm set for any situation i find myself in

HT201328 My nephew give me the iphone and i'm not sure about the carrier. how i can get this information using the imei number?

My nephew give me the iphone and i'm not sure about the carrier. how i can get this information using the imei number?

If you have the iPhone in front of you, here's how you can learn the carrier:
Go to Settings > General > About and look at the "Network" row near the top. There's your carrier's name!

Moved database to new server, not sure about NT AUTHORITY\* users

I just moved database to new instance of SQL Server (SQL Server 2012 Web from Amazon EC2) and am now cleaning up database users.
I am not sure if/why these 2 users are needed (they exist in original database that someone else created and managed before me):
NT AUTHORITY\IUSR
NT AUTHORITY\NETWORK SERVICE
Note that there are also 2 database schemas with exactly the same names. These schemas do not contain any objects.
I am more clear on NT AUTHORITY\IUSR - this seems to be a user for IIS and IIS is not even installed on new instance (IIS will not be used). So this one probably can be deleted (together with matching schema?).
I am not sure about NT AUTHORITY\NETWORK SERVICE (or how it got created to begin with - new databases created on new server don't have it. Newly created databases don't have NT AUTHORITY\IUSR either).
Neither of these 2 users exist at server level on a new instance or on an old instance.

BOL says
Local System account. The name of this account is NT AUTHORITY\System. It is a powerful account that has unrestricted access to all local system resources. It is a member of the Windows Administrators group on the local computer, and is therefore a member of
the SQL Server sysadmin fixed server role
Network Service account. The name of this account is NT AUTHORITY\NetworkService. It is available in Microsoft Windows XP and Microsoft Windows Server 2003. All services that run under the Network Service account are authenticated to network resources as the
local computer.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Help - not sure how to proceed

Hi all - newbie here, so please be kind.
I have a late 2010 15" MacBook Pro that shipped with Snow Leopard. I upgraded to Lion last summer and have had nothing but problems ever since. Two nights ago, my system came to a screeching halt - everything froze up and I had to power down manually to shut it down. When I restarted, it hung at the grey screen with the Apple logo and spinning globe/wheel. I restarted from Recovery HD and ran Disk Utility to repair the disk and permissions. I was able to do that successfully, but it still wouldn't boot up. I tried every step I could find online (reset PRAM, etc.) but nothing has helped. I finally tried to reinstall Lion from Recovery HD, but even that failed - it goes through the motions but ends with the message "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." Wondering if this is because it originally shipped with Snow Leopard, not Lion?
I have been using Time Machine, so I do have a current backup - however, I'm not sure exactly what path to take. Do I use Recovery HD to restore the entire system from Time Machine? Or should I use the original Snow Leopard install DVD (which I have) to reinstall the original OS and then restore everything from within Time Machine (assuming reinstalling the OS makes it possible to use Time Machine)? I'm concerned that doing a complete backup from Time Machine might corrupt the backup disk or something - not sure that's a realistic fear, but if that happened, I'd really be hosed.
I'm thouroughly confused - any help is very much appreciated.
Thanks ~ Laura

Well, I'm pleased to report that I was able to restore my system using a very recent Time Machine backup. I used the original install disk that shipped with the Mac to boot up, then followed the prompts to restore from a Time Machine backup. It took a few hours, but when it completed, everything was exactly as it was just prior to the crash (3 hours before, or so). I had no problem with losing any additional backups - my Time Machine disk still includes backups for the past 6 months or so and seems to be fully functional.
I'll be doing some additional tests/troubleshooting to see if I can pinpoint what caused the crash, but wanted to let anyone who was having similar problems how I was able to resolve it.

I'm not sure about 7.2.3

Hey People. Ok! I hope this is something I am doing wrong. I was having no problem with 7.1. When I updated to 7.2.3 my cpu meter just goes out of control. It seems to peek much faster. I am on a G5 dual 2.5 with 2 gig of ram. My plugins have all been updated and I'm not doing anything new with my software. I don't get it. Please help..........
Thanks.
Todd

Yes I do have BFD. I had put up a post about that a few months back and had the multi-channel BFD problem solved with an upgrade from fxpansion. The only thing I can think of is my UAD-1 card. I do have the latest version software 4.5.0. Other than that I haven't a clue. I always look at the audio units compatibility list to see if things need to be changed. I am using a MOTU 896HD firewire interface. Does anyone know of problems with that card? By the way it's acting my guess is 1. an audio driver or 2. PCI driver. But, I know I could be wrong on both.
Todd

Please help : not a group by expressions

not a group by expressions,
SELECT a.BATCH_ID, a.ASSOCIATE_NAME,count(a.ID)
FROM ASSOCIATE1 a,SEMESTER1 s, BATCH1 b
WHERE s.ID=b.SEMESTER_ID
AND b.ID=a.BATCH_ID
AND to_char(s.END_DATE,'DD-MON-YY')>'25-APR-13'
AND to_char(s.END_DATE,'DD-MON-YY')<'25-MAY-13'
GROUP BY a.BATCH_ID
please help :( I get this error a lot of time, I dont know what I lack about the knowledge of group by function

Hi,
1001317 wrote:
not a group by expressions,
SELECT a.BATCH_ID, a.ASSOCIATE_NAME,count(a.ID)
FROM ASSOCIATE1 a,SEMESTER1 s, BATCH1 b
WHERE s.ID=b.SEMESTER_ID
AND b.ID=a.BATCH_ID
AND to_char(s.END_DATE,'DD-MON-YY')>'25-APR-13'
AND to_char(s.END_DATE,'DD-MON-YY')<'25-MAY-13'
GROUP BY a.BATCH_ID
please help :( I get this error a lot of time, I dont know what I lack about the knowledge of group by functionHere are the ABC's of GROUP BY:
When you use a GROUP BY clause and/or an aggregate function, then everything in the SELECT clause must be:
(A) an Aggregate function,
(B) one of the "group By" expressions,
(C) a Constant, or
(D) something that Depends entirely on the above. (For example, if you "GROUP BY TRUNC(dt)", you can SELECT "TO_CHAR (TRUNC(dt), 'Mon-DD')").
In your case, the SELECT clause includes:
COUNT (a.id) which is an aggregate (A), so it's okay,
a.batch_id which is in the GROUP BY clause (B), so it's okay, and
a.associate_name which is none of the above.
"GROUP BY a.batch_id" means the otput will contain 1 row for every distinct value of a.batch_id. What if there are several rows with the same value of a.batch_id: which of the several values of a.associate_name would you want to include? If your data is such that there can only be 1 distinct value of a.associate_name for each distinct value of a.batch_id, then it doesn't matter which of them is included (they are all the same), so you can use MIN (a.associate_name) or MAX (a.associate_name), or, even better, include a.associate_name in the GROUP BY clause.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ {message:id=9360002}
&nbps
By the way:
AND to_char(s.END_DATE,'DD-MON-YY')>'25-APR-13'
AND to_char(s.END_DATE,'DD-MON-YY')<'25-MAY-13'I don't think you really mean what you said on the 2 lines above. You porbably meant
{code
AND s.END_DATE > TO_DATE ('25-APR-2013', 'DD-Mon-YYYY')
AND s.END_DATE < TO_DATE ('25-MAY-2013', 'DD-Mon-YYYY')

Please help, simple question about Smart Playlists and Live Updating

PLEASE for some reason I've never gotten an answer on this.
I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
Thanks so much

Haven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know.

Not sure about international txting

Hello,
I have a friend in Australia I talk to a lot and I shied away from texting internationally as not to get charged. Now I knew I had unlimited texting, but wasn't sure about out of country and we texted each other a few times so I went to "Current Usage" to see if it did any damage. I scroll down to "Messaging" area and it says the following:
Nationwide TLK&TXT Share 700 (mom and I on same account)
Under that is a green bar and above it to the far right says, "0/Unlimited"
Under that it lists the "Usage Type" and under 'Text', it lists large numbers I knew were already safe, but going further across, it lists 'International Plan' and 'International Pix-Flix'. Both those last 2 categories have numbers, 4 sent, 11 received, 5 received flix.
Now my question is: Since it still reads 0/Unlimited above the green bar, does that mean it's safe to text and pix-flix internationally? Could have sworn a woman at Verizon told me they didn't have an international plan or something or other.

Grothka is close.
The price for sending International Text Messages will remain the same at $0.25 per message. The price for receiving International Text Messages will increase to $0.20 per message.

Please Help Not sure About Something!!!!!!!!

Similar Messages

Maybe you are looking for