Please help ... Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later?
Hi there,
I'm have a bit of an issue with After Effects and Premiere.
After Effects:
Keeps asking for Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Premiere crashes unexpectedly
Can someone please help
Much-ly appreciate
Hi there,
Sorry took a while to get back to you guys. I have been having some issues with Premiere and Aftereffects CC.
I recently bought an Apple Pro CTO - Intel Xeon E5 3.7 GHZ Quad-Core with 10MB of L3 Cache, 32GB (4x 8gb) 1866MHZ DDR3 ECC DDR3 RAM, 1TB PCIE-BASED Flash storage, DUAL AMD FIREPRO D500 GPUS with 3GB of GDDR5 VRAM, DUAL Gigabit NIC, 802.11AC, bluetooth, 6x thunderbolt2 ports, MAC OS X.
Issue 1 - Aftereffects CC
Ray-tracing o the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Issue 2 - Premiere CC
Warp Stabiliser wasn't stabilising correctly and now doesn't work at all in premiere CC. I even tried to link to aftereffects but it still doesn't stabilise the shots correctly.
I use to operate PC before with Adobe CS6 and I didn't get any issue stabilising.
If you guys can point me what's the best way to get it to work correctly that would be magic.
Look forward to hear from you
Regards,
Jean-Eddy Moutou
Similar Messages
-
Please help :) Error Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0.
Hi All, if anyone can help me fix this error I will be most aprreciative.
I get this error when I open After Effects.
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray tracing will use the CPU.
After installing CUDA 5.0 or later, restart your computer.
For more information see: http://www.adobe.com/go/aeraytracegpu
Im on a MAc Pro Desktop running latest OSX (OS X 10.9.2 (13C64) and a
Graphics Card: ATI Radeon HD 5770 1024 MB (not a NVIDIA its AMD)
I have tried updating software and the operating system as this is now what recent OSX versions do apparently. Not downoloading the driver software as AMD only support up to the previous operating system.
Kind Regards Toby.
Motion Designer / EditorI have this warning come up, too. And when I close it, the program crashes. I can't get it to work without it.
I use Photoshop CC and that works fine.
I'm running Windows 8.1(more info below). I've tried to read for solutions in forums but none of them provide any.
Some have said they figured it out but don't say how, another said he re-installed Windows?
Any help is appreciated! -
Ray-tracing on the GPU requires CUDA version 4.0 warning
Hello,
I've been using AE CS6 on Mac OS 10.7.4 upon release and updated to 11.0.1 when it was released as well, so for a while, but just today I started to get this warning-
"Ray-tracing on the GPU requires CUDA version 4.0 or later. Ray-tracing will use the CPU until you install the latest supported CUDA driver."
I am running a supported Quadro 4000 with the latest CUDA driver, 4.2.7, and about the only thing I know of that I have installed recently was the update for SpeedGrade today. Any idea why I'm now getting the warning?Hi Kevin, thanks for responding. Here's a rundown of the system info, some of it may be redundant-
Computer Hardware-
MacPro4,1
Dual Quad Core
2.93 Ghz
12 GB ram
Quadro 4000- CUDA driver version 4.2.7
Blackmagic Intensity Pro
OSX 10.7.4
The error, which reads-
"Ray-tracing on the GPU requires CUDA version 4.0 or later. Ray-tracing will use the CPU until you install the latest supported CUDA driver
For more information see: http://www.adobe.com/go/aeraytracedgpu
Show warning- once per session/never again"
happens on startup. I went to http://www.adobe.com/go/aeraytracedgpu and didn't find anything that was relevant to this issue. Today was the first day it happened, so AE has started up error free before, and the only change I can think of was the update for SpeedGrade. Aside from CS6 applications, which are all updated according to the Adobe Application Manager, other software I run is- FCPX, Compressor, Lightwave and rarely FCP 7. I have some Red Giant trial plug ins, and FXFactory installed, but no 3rd party codecs. In the AE projects I use XDCAM EX footage, with Ai, tiff and jpeg files, almost exclusively. I assume it uses OpenGL features, I haven't done anything in particular that I know of about that, and Render Multiple Frames is deactivated.
I am only using one video card, which has been installed the whole time.
Thanks for any help
Dave -
I would like to know whether After Effects CC Ray-traced 3D support the GPU of the new iMac with retina display.
It never will. This is nVidia-exclusive technology and the whole things is deprecated, anyway. You better learn to use Cineware, buy a 3D program like Pro Animator or Element 3D or learn a proper 3D program.
Mylenium -
Is there a fix for this. I'm new so I don't notice any problems with software, but I hate to see warnings pop up when I first open software up. Thanks community!
There's nothing wrong. After Effects is just telling you what's possible with your hardware and drivers. Follow the link in the message for details.
-
Please help me to solve the issue in my query.
Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0) -
Please help me to unlock the iPhone after restore ,where required me Apple ID and I forgot
Please help me to unlock the iPhone after restore ,where required me Apple ID and I forgot
it is locked by icloudAnswered here:
https://discussions.apple.com/thread/6045913?tstart=0
Don't double post. You may not like the answer, but the answer will not change, no matter how many times you post.
No one here can help you. -
Please help me in Merging the Persons Together by assining the same id
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Please Help Me
We_addr_id defines the Address.
We_pid Defines the Person.
i am planning to merge the same person together by assigining the same we_pid.
WITH merge_names AS (SELECT 1000 We_pid,
999898989 We_addr_id,
'DONALD' first_name,
'BOATRIGHT' last_name,
'L' middle_name,
NULL Suffix FROM DUAL
UNION ALL
SELECT 1001 We_pid,
999898989 We_addr_id,
'DONALD' first_name,
'BOATRIGHT' last_name,
'LARRY' middle_name,
NULL Suffix
FROM DUAL
UNION ALL
SELECT 1002 We_pid,
999898989 We_addr_id,
'DONALD' first_name,
'BOATRIGHT' last_name,
NULL middle_name,
NULL Suffix
FROM DUAL
UNION ALL
SELECT 33065 WE_PID,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
NULL middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 8450527 WE_PID_LINK,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
'A' middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 373453429 WE_PID_LINK,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
NULL middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 442303062 WE_PID,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
'S' middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 30088775765 WE_PID,
990000878 We_addr_id,
'BILL' last_name,
'RAY' first_name,
'M' middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 30088775766 WE_PID,
990000878 We_addr_id,
'RAY' first_name,
'BILL' last_name,
NULL middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 30088775767 WE_PID,
990000878 We_addr_id,
'RAY' first_name,
'BILL' last_name,
'MAX' middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 30088775768 WE_PID,
990000878 We_addr_id,
'RAY' first_name,
'BILL' last_name,
'MICHEL' middle_name,
NULL SUffix
FROM DUAL
UNION ALL
SELECT 399998776 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
NULL middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 399998777 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
'J' middle_name,
'JR' SUFFIX
FROM DUAL
UNION ALL
SELECT 399998778 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
'JAMES' middle_name,
'SR' SUFFIX
FROM DUAL
UNION ALL
SELECT 399998779 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
'JACK' middle_name,
'JR' SUFFIX
FROM DUAL)
SELECT *
FROM merge_names
o/p Required
WE_PID WE_ADDR_ID FIRST_NAME LAST_NAME MIDDLE_NAME SUFFIX MERGE_WEPID
1000 999898989 DONALD BOATRIGHT L 1000
1001 999898989 DONALD BOATRIGHT LARRY 1000
1002 999898989 DONALD BOATRIGHT 1000
33065 99000000 LUNA JOSE 33065
8450527 99000000 LUNA JOSE A 8450527
373453429 99000000 LUNA JOSE 33065
442303062 99000000 LUNA JOSE S 442303062
30088775765 990000878 BILL RAY M 30088775765
30088775766 990000878 RAY BILL 30088775766
30088775767 990000878 RAY BILL MAX 30088775767
30088775768 990000878 RAY BILL MICHEL 30088775768
399998776 9901111 ELLISON LAWRANCE 399998776
399998777 9901111 ELLISON LAWRANCE J JR 399998777
399998778 9901111 ELLISON LAWRANCE JAMES SR 399998778
399998779 9901111 ELLISON LAWRANCE JACK JR 399998777ThanksMissing information on how you identify same person.
I'm going with an assumption that same person is identified by first_name,last_name,middle_name and suffix.
WITH merge_names AS (SELECT 1000 We_pid,
999898989 We_addr_id,
'DONALD' first_name,
'BOATRIGHT' last_name,
'L' middle_name,
NULL Suffix FROM DUAL
UNION ALL
SELECT 1001 We_pid,
999898989 We_addr_id,
'DONALD' first_name,
'BOATRIGHT' last_name,
'LARRY' middle_name,
NULL Suffix
FROM DUAL
UNION ALL
SELECT 1002 We_pid,
999898989 We_addr_id,
'DONALD' first_name,
'BOATRIGHT' last_name,
NULL middle_name,
NULL Suffix
FROM DUAL
UNION ALL
SELECT 33065 WE_PID,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
NULL middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 8450527 WE_PID_LINK,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
'A' middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 373453429 WE_PID_LINK,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
NULL middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 442303062 WE_PID,
99000000 We_addr_id,
'LUNA' First_name,
'JOSE' last_name,
'S' middle_name,
NULL suffix
FROM DUAL
UNION ALL
SELECT 30088775765 WE_PID,
990000878 We_addr_id,
'BILL' last_name,
'RAY' first_name,
'M' middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 30088775766 WE_PID,
990000878 We_addr_id,
'RAY' first_name,
'BILL' last_name,
NULL middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 30088775767 WE_PID,
990000878 We_addr_id,
'RAY' first_name,
'BILL' last_name,
'MAX' middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 30088775768 WE_PID,
990000878 We_addr_id,
'RAY' first_name,
'BILL' last_name,
'MICHEL' middle_name,
NULL SUffix
FROM DUAL
UNION ALL
SELECT 399998776 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
NULL middle_name,
NULL SUFFIX
FROM DUAL
UNION ALL
SELECT 399998777 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
'J' middle_name,
'JR' SUFFIX
FROM DUAL
UNION ALL
SELECT 399998778 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
'JAMES' middle_name,
'SR' SUFFIX
FROM DUAL
UNION ALL
SELECT 399998779 WE_PID,
9901111 We_addr_id,
'ELLISON' first_name,
'LAWRANCE' last_name,
'JACK' middle_name,
'JR' SUFFIX
FROM DUAL)
SELECT we_pid,we_addr_id ,first_name,last_name,middle_name,suffix,min(we_pid) over (partition by first_name,last_name,middle_name,suffix) merge_wepid
FROM merge_names m -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
Please help me in resolving the URL with parameters.
Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
UshaWe've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim -
I bought the app peru tv in march. Sometimes it stays idle when downloading a tv channel so I ended up deleting the app and reinstalling it. Today I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't replied regarding problems with channels and lost app
In order to properly upgrade the OS of your Mac. 10.1 Puma is really old. Your Mac has to meet the tech specs for Lion: And it would probably need to be a clean install. If you recently purchased Lion. Call Apple Care CPU and ask them to be sure. You get 90 days Free of phone support. 1-800-275-2273
Apple - OS X Lion - Technical specifications
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply. -
Please help me to visible the create event menu in workflow administrator.
Hi All,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )
Regards
GopinathHi,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )You should find "Create Event" and "Create Events Groups" buttons in the same page under "Results : No Search Conducted".
Regards,
Hussein -
Please help me to close the IF blocks.
HI EXperts,
Please help me on closing the IF blocks properly in the below procedure.
CREATE OR REPLACE PROCEDURE sums_proc
Id INTEGER,
mtrname VARCHAR2
mtrtype INTEGER,
AS
state VARCHAR2(10);
accesslevel INTEGER;
asts NUMBER;
mtrtypesql LONG;
sumsql LONG;
BEGIN
SELECT st_name INTO state FROM states_info WHERE st_name = 'KARNATAKA';
SELECT acc_level INTO accesslevel FROM level_table WHERE level_id = 4;
IF (accesslevel = 4) THEN
BEGIN
asts :=4;
END;
ELSIF (accesslevel = 3) THEN
BEGIN
IF (OBJECT_ID('CANN_TABLE') IS NOT NULL) THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE CANN_TABLE';
END;
EXECUTE IMMEDIATE 'CREATE TABLE CANN_TABLE';
END;
ELSE
BEGIN
IF OBJECT_ID('MANN_TABLE') IS NOT NULL THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE MANN_TABLE';
END;
EXECUTE IMMEDIATE 'CREATE TABLE MANN_TABLE';
END;
IF (mtrname IS NULL OR mtrname = '') THEN
mtrname := '';
ELSE
mtrname := 'DEFAULT';
IF (mtrtype > 2) THEN
mtrtypesql := ' AND (mtr = 1) ' ;
ELSE
mtrtypesql := ' AND (mtr = 2) ';
END IF;
IF (mtrtype = 1) THEN
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM sales_table WHERE sales_type=''SALES''||mtrtypesql';
END;
ELSIF (mtrtype = 2)
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN''||mtrtypesql';
END;
IF (mtrtype = 4 OR mtrtype = 3) THEN
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN''||mtrtypesql';
END;
ELSIF (mtrtype = 10 OR mtrtype = 15) THEN
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE revenue_type=''REVENUE''||mtrtypesql';
END;
ELSE
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE all_type=''ALL''||mtrtypesql';
END;
sumsql := ' SELECT SUM(amount) FROM salesum_table';
EXECUTE IMMEDIATE mtrtypesql || ' UNION all ' ||sumsql ;
IF OBJECT_ID('CANN_TABLE') IS NOT NULL THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE CANN_TABLE';
END;
END IF;
IF OBJECT_ID('MANN_TABLE') IS NOT NULL THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE MANN_TABLE';
END;
END;
Please help me.
Thanks.Hi,
Thanks for your help.
Please help on the error.
ORA-24338: statement handle not executed
CREATE OR REPLACE PROCEDURE sums_proc(
p_Id INTEGER,
mtrname VARCHAR2 mtrtype INTEGER,
P_out OUT SYS_REFCURSOR
AS
state VARCHAR2(10);
accesslevel INTEGER;
asts NUMBER;
countval NUMBER :=0;
mtrtypesql LONG;
sumsql LONG;
v_query LONG;
BEGIN
SELECT st_name INTO state FROM states_info WHERE st_name = 'KARNATAKA';
SELECT COUNT(*) INTO countval FROM level_table WHERE level_id = p_id;
IF countval = 0 THEN
RETURN;
ELSE
SELECT access_id INTO accesslevel level_table WHERE level_id = p_id;
IF (NVL(accesslevel, 0) = 0) THEN
RETURN;
END IF;
END IF;
IF (accesslevel = 4) THEN
asts :=4;
ELSIF (accesslevel = 3) THEN
IF (OBJECT_ID('CANN_TABLE') IS NOT NULL) THEN EXECUTE IMMEDIATE 'DROP TABLE CANN_TABLE';
ELSE EXECUTE IMMEDIATE 'CREATE TABLE CANN_TABLE(SM NUMBER)';
END IF;
ELSE
IF OBJECT_ID('MANN_TABLE') IS NOT NULL THEN EXECUTE IMMEDIATE 'DROP TABLE MANN_TABLE';
ELSE EXECUTE IMMEDIATE 'CREATE TABLE MANN_TABLE(SM NUMBER)';
END IF;
IF (mtrname IS NULL OR mtrname = '') THEN mtrname := '';
ELSE
mtrname := 'DEFAULT';
IF (mtrtype > 2) THEN
mtrtypesql := ' AND (mtr = 1) ' ;
ELSE
mtrtypesql := ' AND (mtr = 2) ';
END IF;
IF (mtrtype = 1) THEN
mtrtypesql := 'SELECT SUM(amount) as amount FROM sales_table WHERE sales_type=''SALES'''||mtrtypesql;
ELSIF (mtrtype = 2)
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN'''||mtrtypesql;
ELSIF (mtrtype = 4 OR mtrtype = 3) THEN
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN'''||mtrtypesql;
ELSIF (mtrtype = 10 OR mtrtype = 15) THEN
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE revenue_type=''REVENUE'''||mtrtypesql;
ELSE
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE all_type=''ALL'''||mtrtypesql;
END IF;
sumsql := ' SELECT SUM(amount) FROM salesum_table';
v_query :=||mtrtypesql || ' UNION all ' ||sumsql ||';
OPEN P_out FOR v_query;
COMMIT;
END;
My requirement is
IF accesslevel = 0 or IF accesslevel is not existed the program should come out.
SO that I have included the below code
SELECT COUNT(*) INTO countval FROM level_table WHERE level_id = p_id;
IF countval = 0 THEN
RETURN;
ELSE
SELECT access_id INTO accesslevel level_table WHERE level_id = p_id;
IF (NVL(accesslevel, 0) = 0) THEN
RETURN;
END IF;
END IF;
I want to send the result set to front so that I have replaced the below statement with
EXECUTE IMMEDIATE 'BEGIN INSERT INTO CANN_TABLE '||mtrtypesql || ' UNION all ' ||sumsql ||';
OPEN P_out FOR v_query;
If I get accesslevel as 0 I am getting error when executing thic procedure.
ORA-24338: statement handle not executed
Please help me.
Thanks. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
Maybe you are looking for
-
In develop mode basic has disappeared how do? I get it back
in develop mode basic has disappeared how do I get it back?
-
Remittanc advice by email and also by printing
Hi Experts, Our requirement is that email needs to be triggered for all remittance advices and simultaneously printing needs to carried out for those vendors with no email address or invalid email address. We have activated BTE 2040 to trigger the em
-
How can I access to my security question?
-
Can MSE running software 7.0.220.0, work with WCS runing WCS-standard-K9-7.0.240.0 and WLC 5508 runing AIR-CT5500-K9-7-3-112.0 ?
-
With a given pernr, how can I find the name of the person
Hi all, Please answer me. Thanks.