Please help trying to get "Remote" app to prompt me for passcode
I am pretty good at these things and for some reason after installing the app on my iPhone 3G I am unable to use the passcode thats given because I get no prompt on the sidebar to enter it in.
I see a lot of complaints in the app store about this not working well. Sharing in iTunes is turned on Firewall I have allowing incoming connections. Maybe I'll wait for a update.
Thanks in advance.
First of all, are you using Windows or MAC? Second if using Windows XP, try turning off the Firewall Completely:
1-Right click on My Network Places and click properties
2-Right click on either Local Area Connection or Wireless Network Connection and click properties
3-Click on the Advanced Tab, click on Windows Firewall Settings,
4-Click on the Off balloon and click Ok.
If you want to check the exception list to make sure iTunes can pass through the firewall click on the Exceptions Tab and make sure that iTunes is checked and click Ok.
If you are using a Mac I can't really help, and if you are using Windows Vista I can post some options to try as well. Hope this helps!
Similar Messages
-
I need help with redeeming a $15 App Store certificate. I tried to redeem earlier in the day and it was credited to my account. I could not figure out how to switch payment from my credit card to the gift card credit. Later on in the day I see the credit is completely gone and now the card is invalid. Nothing was purchased with the gift card so I want to know where the credit went. I also have$5 credited to my Apple ID from a past gift card that I can't access. What can I do. Is there a customer service number???
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed
The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212 -
Gurus, please help I am getting oracle.apps.fnd.cache.CacheException
Hi, I am not a newbie to OAF. I have worked good amount on the OAF 9i development. Currently we are on R12.0.4 and Jdev 10g (patch 6908968) But this error really beats me. I believe it could be due to a Apache error, but may be I am doing something wrong here and so hopefully you can provide me some insight. I am trying to configure my JDev 10G for R12 development. I am trying to run supplied HelloWorld page in Tutorial.jpr. I have set the DB connection and provided the username/password with responsibility key and also the DBC file in the Runtime Connections properties for the Project. I have also tried the alternative i.e building a custom HelloWorld, but even with that I get the same error.
Please let me know if I should be doing anything else.
Thanks and appreciate your help.
Rahul
---------------------------------------------------Error ------------------------------------------------------------------------
racle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485)
at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259)
at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114)
at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037)
at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595)
at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891)
at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1027)
at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:223)
at OAErrorPage.jspService(_OAErrorPage.java:66) [OAErrorPage.jsp]
at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.3.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:847)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:813)
at runregion.jspService(_runregion.java:197) [runregion.jsp]
at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.3.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712)
at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802)
at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624)
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216)
... 50 moreCaused by: oracle.apps.jtf.base.resources.FrameworkException: An exception occurred in the method CacheAccess.getnullThe base exception is:null Connection
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249) ... 54 more
-------------------------------------------------------------------------------------------------------------------------------------------------I did thought it was a DBC issue before, so I requested the DBC file again from the DBA's. I try the page and get the same error again. This time I looked at the DBC and compared the JDBC string with what I have on the TNSNames. The server name on the DBC file provided to me was slightly off. So, that was the error. The dbc file had imbcdd-d as the server name, whereas in the TNSName it was imbcdd-b. I fixed the DBC and reran and there it goes I get the HelloWorld Page.
Thanks a bunch to all. I should have it investigated more. Apologize for the siilly post.
Rahul -
Please help - trying to use remote desk top
Hi!
Let's see if I can explain this correctly...
I am on a PowerBook G4 in California and my mom is on her brand new MacBookPro in Ohio.
I bought the Apple Remote Desktop and installed it on my computer so I could log on and control hers in Ohio so I can teach her to use her new computer.
I followed all directions, all her preferences and and authorizations are checked on her computer, and spoke with Apple tech support, etc. and here is the problem:
Her husband's son (who THINKS he is some kind of computer wiz) hacked together an internet connection at her house that goes like this - Speedstream motem to Netgear FVS318 to another Netgear FVS318 to an Airport. Why he did it this way??? Your guess is as good as mine...
From what I understand, I need to Port Map (?) and the Netgear routers are blocking me from remotly connecting with her computer (?). I have her public IP address and her private IP address...How do I get around these Netgear things????
Thanks so much for your help!
Oh, and plugging the Airport directly into the motem is not an option. I believe this is because The Wiz Kid has somehow enabled her husband to connect wirlessly to his printer with an IMac (that would be one of those blue ones from a million years ago that won't even burn a disk..you know the one? That is if you can remember back that far)...How do I get around these Netgear things????
Well, you can't "get around them", per se. In each of them, the ports used for ARD will have to be open, and then eventually forwarded to the internal IP address for your mom's MacBook Pro. Given the (probably unnecessary) complexity of the setup at her house, that's going to be a bit difficult, and very probably not something you can do remotely.
The ports that ARD uses must be open in each of the routers between the modem and her computer (as well as in any router on your end). ARD uses ports 3293 and 5900 so those must be open. The ports also need to be forwarded in the Airport (if she's using the MBP wirelessly) to the MBP's internal IP address. Someone will have to connect into each router's admininstration function to set up those ports; I'm guessing that you won't be able gain such access remotely, though it's possible.
It's a complex situation, so it may take some tinkering to get it work, something that's probably going to be difficult from your end. With luck, her husband's son knows enough about what he's doing to be able to help. Anything he can do to simplify the network configuration will be of benefit.
Good luck. -
Please help, trying to get SIM to work
Hi, I sure someone can help. I am from Canada and traveling abroad in Germany. My carrier in Canada is Koodo and Ye iPhone comes unlocked. However, every time I put in my German sim card Fonic, it sends me to the activation process and gives me this error
Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier's store to receive a replacement SIM card.
I don't understand. This sim card is desIgned for the iPhone 4 and iPad it says on the box. Now I have a 4S but one would think that should not matter. Any thoughts? Thank you I'm advance for any helpChecking this support document http://support.apple.com/kb/HT1937 I do not see where that is a supported carrier of the iPhone. While the document also states all phones are locked to carriers, many will unlock them. Unless, this is a new carrier that is not listed on the sheet.
The error you are getting is indicitive of a locked phone. How was this phone unlocked. Many unsupported carriers will do software unlocks on phones.
You would have to check with your carrier about the unlock status of the phone. -
Please Help - Trying to get contents of column (RepeaterRenderer)
Hi,
I am trying to write the contents of the table to a file but without the markups. So, I am trying to obtain the contents of the column when using RepeaterRenderer. I think this is where the contents is but I have no idea how to extract it.
protected void rowBody(FacesContext context, UIData data,
ResponseWriter writer) throws IOException {
// Iterate over the UIColumn children of this UIData component
Iterator columns = data.getChildren().iterator();
int currentColumn = 0;
while (columns.hasNext()) {
// Only process UIColumn children
UIComponent column = (UIComponent) columns.next();
if (!(column instanceof UIColumn)) {
continue;
Iterator contents = column.getChildren().iterator();
while (contents.hasNext()) {
encodeRecursive(context, (UIComponent) contents.next());
currentColumn++;
So, what I am trying to do is something like "writer.write(contents.toString())" where the writer would be a Fileoutputstream object instead of a ResponseWriter. However, since contents is of type Iterator, I have no idea how do I extract the contents of the table.
Any help and suggestions are appreciated.
Thanks in advance!Be careful when you copy the address as there is a space between
/src/compone" "nts/..... and it seems to be added even though it is not there when I posted the message.
Thanks. -
I lost the app "app store" on my iphone. How to get it back? I couldn't find a way neither on the iphone mor on iTunes Could you please help me in restore this app? Thanks
The App store is a iOS function and cannot be deleted. Try checking other home screens/folders and see if you can locate it. If not, go into Settings>General>Reset>Reset Home Screen Layout.
-
Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.
Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem? -
Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?
Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?
Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance. -
Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks
Hello there, Kumarlmk.
The following Featured Discussion deals with the issue you seem to be describing and provides some workable solutions:
The Camera app is suddenly missing from...: Apple Support Communities
https://discussions.apple.com/thread/5284736
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
HT3630 How to creat an app-enabled accessories for iPhone? Please help me to get an answer..
How to creat an app-enabled accessories for iPhone? Please help me to get an answer..
To get hardware interfaces and API's via hardware you
need to join the MFi program. That info is here:
https://developer.apple.com/programs/mfi/
To get the additional software to be able to download
and test code on any iDevice, you must join the
iOS Developer Program. That info is here:
https://developer.apple.com/programs/ios/
Both programs require fees and NDA agreements,
especially hardware as most vendors that supply
components development tools will not sell you any
of their tools unless you are a member of the MFi
program. -
Hi i`ve been trying to get a unlock code from orange for over 2months with no joy,please can you help
We're users here. We cannot help. You will continue to work with Orange.
-
Could someone please help me, I bought my daughter an iphone 4s for her birthday yesterday and I set it up for her so she could use it straight away, now we share emails, facetime and when i download an app she gets it too, very annoying for us both.
you can use the same apple id for purchasing apps and music if you want, but turn off automatic downloads. it may be better to have separate ones, but if you want the same app you'd have to pay twice. that's something you'll have to think about. for all the other stuff like facetime and messages and icloud you need to have separate icloud id's. see the apple link below.
http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US -
Ive just got a new iPhone4 and I am trying to get the App's ie games from my iPhone3 onto the 4 and retain the same levels that I have reached on the 3,
The Apps have gone onto the 4 but its making me re-start everything from level 1?
Ive paid $$ for the games and then more $$ within the games via iTunes for in game purchases and desperatly want the games on the 4 with the levels that I have reached on the 3!
Can anyone help!! Please!!!! My Smurfs and Animals are starving HahahahaMate, it's good to hear that you have gotten the iPhone 4 but sorry to burst your bubbles. Not all games can have the "saved" data ported over.
Normally when you save a game in iPhone, the memory used is in the flash memory of the device. Those that can be ported over, reason is due to the data being saved over the air and when you logged in on a new device, it recognises you via the userID.
Maybe you can try to backup your iPhone 3, and restore the file onto your iPhone 4. Not too sure if that would brick your phone though.
Maybe you are looking for
-
How to configure external FTP backup server CISCO NCS 1.1
How do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.
-
Unable to delete RECORD in AppServer, after migrating form 6i to 11g
Hi All, I am facing an issue, we have migrated a form from 6i to 11g the logic in "key-delrec" throws error in 11g while it is same and does not throw any error in 6i, whenever the record is tried to delete it is showing the error and if the commit_f
-
System shut down during F110 payment run
During the F110 payment run, the PRD system shut down. There were 259 items in the proposal and according to the status 42 posting orders were generated and completed. What is the process to handle this problem? Can the payment run be re-started? It
-
Can anyone tell me what the possible values are for the CurrentState value of a package under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages For Example: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\C
-
MAX: How to display icons (blob) in VB
Hi! I've written a VB application which gets some information from MAX. It works very well, but I was wondering how to display the icons (stored as blob). Who can help me? Thank you in advance!! here is a piece of my code: Dim maxConf As mxConfigurat