Please tell me the significance of the alphanumerics in the serial number of my sound ca

Hi,
Will you please tell me the significance of the several letters and numbers in the serial number of my sound card. It is: MASB046755000468S.
I am expecting that it will reveal the model family, the sub classification amongst that family, retail or OEM, date of manufacture, batch, and other interesting details. In case they are of siginificance, other markings on the card are E-G03-05-3757 (B)
Also the Revision is shown as A00. Is that the earliest version? Are their higher revision numbers than this?
Many thanks
Palmer.

The full series OnDemand was a big selling point for me, but the reality has turned out to less than perfect to say the least. I can remember a while back trying to watch The Sopranos from the start of season 1, but they don't have the episodes on long enough for you to watch them. After a while, they take the 1st episodes off and expect you to watch from mid-way through, without watching from the start of the season, not something I want to do.
I've given up trying to watch whole seasons with onDemand, and only use the catch-up service for documentries, Eastenders and the odd comedy show.

Similar Messages

Please tell me the part number of my keyboard of HP ENVY 15 j138tx .Product number: F9Z55PA#UUF

Please tell me the part number of my keyboard of HP ENVY 15 j138tx .Product number: F9Z55PA#UUF. I cannot find it and I want to replace it ASAP

For use in the United States 720244-001 on eBay Are you going to be able to install it yourself?

Please tell me the Requirement number

Dear Experts,
Please check the requirement number 600 in Calculation schema, Requirement Column.
Most probably on SAP version 4.6 and 4.7 and please give me the description of requirement 600.
Thanks in advance.

Hi,
Purpose of Requirement 6 is "Condition exclusion <> 'X'";
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing.

Fake power adapter - can I tell from the serial number?

Hi,
I have a 60W power adapter (magsafe, t-plug) and I'm trying to establish whether it's an 'Apple approved' part. It looks like my other power adapter - same writing on the sides, same apple logo embossed into the side - but I no longer trust the source.
Is there a way I can tell from its serial number? There is a number next to the cable socket, reading "RR84530725UA". I have a feeling that this might be a part not intended for UK market, or possibly one that has not passed the proper QA checks.
Any ideas?
Thanks in advance,
Alastair

Probably the best thing to do is take it to an Apple Store and compare it side-by-side with an Apple-branded adapter.

Accessing history of an e-bay iBook using the serial number.

hi all
i'm looking at an iBook G3 (M6497) on e-bay at the moment and I got the seller to send me the serial number so that I could take a wee peek at the history of the machine. The seller kindly sent me the serial number, but how / where do I enter this number to access data on the history of this machine? I'm kinda new to MacWorld, so any help or advice at all would be very much appreciated.
Cheers all
Steve k

Hi, and welcome to Apple Discussions.
The only thing you can really tell by the serial number is when the warranty expired (if that helps). This will give you the original purchase date and whether or not AppleCare was purchased on it.
Enter the serial number in the box on this page:
https://selfsolve.apple.com/GetWarranty.do

HT1267 someone has found my lost Ipad3 and changed he name. How do i find the serial number?

I left my Ipad (3 the new one) on an airplane a couple weeks ago. How do I remotely find the serial number to register it as lost? Can the person who picked it up access it even though I've remotely locked it?

No, they cannot access the data on your iPad, though they can wipe it, which would also wipe the passcode.
The iPad should be registered to you, so go to http://supportprofile.apple.com and that will tell you the serial number.

CS6 asks me the serial number. Help needed ...

The CC6 ask me the serial number, I put the serial number that Adobe provide me by email and the little window mark an error, How I can instal this 1149$ package? I need to use it now, please help me

Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
If the page linked above doesn't help resolve the issue, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

You should be able to just place them in your Books library in iTunes and check to ensure that your Book library is configured to sync to your iPod when you sync your iPod to iTunes.

Can someone please tell me the cause of the msg-The song could not be used because the original file could not be found- and how I might correct that problem?

Can anyone please tell me the cause of the msg-The song" " could no be used
because the original file could not be found-and how I might correct that problem? Lou

I stupidly tried to copy my music files to an external drive so I could transfer them to my new iMac (old Macbook Pro is being retired). I now know I should've tried home sharing or something to transfer the music.
Anyway, the situation I am in is that I have not managed to transfer anything and I now cannot access the music on my old Macbook Pro either! I have the message "the song 'xyz' could not be used because the original file could not be found. Would you like to locate it?". I understand that this is because iTunes cannot locate the files. When I try to locate the files I find nothing.
I have tried searching my whole Macbook Pro for mp3 files and m4a files and Spotlight cant find any! The tracks are all still listed in iTunes. I also searched the external hard drive. I definitely haven't deleted anything. So where could they have gone and is there anything else I can do to search for them? I have a feeling I am just not searching for them in the right way because I have not deleted anything.
Old computer is Macbook Pro OS X 10.6.8 with iTunes 10.4.1
New computer is iMac OS X 10.7.2 with iTunes 10.5
All I want to do is to set everything back to how it was so I can try the transfer a better way.
Please help. Thanks, Dashford.

Please tell me the soluation How can I give the soluation bilow issue.

Dear Experts,
Please tell me the soluation How can I give the soluation bilow issue.
Currently user are facing one problem with respect of Line item report.
In any of the line item report (i.e. FBL1N, FBL3N, FBL5N) we want to view header reference as column data wonu2019t appear in any of the reference filed.
For Example in Bank G/L Cheque number was enter in reference field but same is not apear
In Sales G/L or tax G/L invoice number is to be appear which is again invoice number as reference in document.
Regards
Devendra.
Moderator: Give proper titles to your threads

Hi,
To add Reference field in line item report do below.
From FBL1N output screen.
Click change layout / (clr + F8)
Now add Hidden field u2018Referenceu201D to column content and push copy button.
Now you should be able to view reference field (BKPF- XBLNR) in line item report.
Best Regards,
Raju

Please tell me the step by step process of backup and full restore

Dear all,
we are using ecc5 and windows and oracle 9i I am going to apply support package .Please tell me the step by step process of backup and full restore . I am using DB13 for backup. Please suggest.
Regards,
Shiva

Hi,
Login as <SID>adm user & run the following command
brrestore -b <backup logfilelogfile> -m full
this command restore the backup.
you can find backup logfile in /oracle/<SID>/sapbackup/.ant or .aft .
For backup using brtools follow the following procedure:-
Run Brtools Than you get the following option
1 = Database backup
2 - Archivelog backup
3 - Database copy
4 - Non-database backup
5 - Verification of database backup
6 - Verification of archivelog backup
7 + Additional functions
8 - Reset input values
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
1
BR280I Time stamp 2008-04-04 18.41.57
BR663I Your choice: '1'
BR280I Time stamp 2008-04-04 18.41.57
BR657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initPRD.sap]
2 - Backup device type (device) ...... [tape]
3 ~ Tape volumes for backup (volume) . []
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [system/*******]
6 - Backup type (type) ............... [online]
7 - Back up disk backup (backup) ..... [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
3
BR280I Time stamp 2008-04-04 18.42.25
BR663I Your choice: '3'
BR280I Time stamp 2008-04-04 18.42.25
BR681I Enter string value for "volume" (scratch|<tape_vol>|<tape_vol
PRDB04
BR280I Time stamp 2008-04-04 18.43.06
BR683I New value for "volume": 'PRDB04'
BR280I Time stamp 2008-04-04 18.43.06
BR657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initPRD.sap]
2 - Backup device type (device) ...... [tape]
3 ~ Tape volumes for backup (volume) . [PRDB04]
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [system/*******]
6 - Backup type (type) ............... [online]
7 - Back up disk backup (backup) ..... [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
c
BR280I Time stamp 2008-04-04 18.43.46
BR663I Your choice: 'c'
BR259I Program execution will be continued...
BR280I Time stamp 2008-04-04 18.43.46
BR657I Input menu 16 - please check/enter input values
Additional BRBACKUP options for backup and database copy
1 - Confirmation mode (confirm) ....... [yes]
2 - Query mode (query) ................ [no]
3 - Compression mode (compress) ....... [hardware]
4 - Verification mode (verify) ........ [no]
5 - Fill-up previous backups (fillup) . [no]
6 - Parallel execution (execute) ...... [0]
7 - Additional output (output) ........ [no]
8 - Message language (language) ....... [E]
9 - BRBACKUP command line (command) ... [-p initPRD.sap -d tape -v
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
c
BR280I Time stamp 2008-04-04 18.44.29
BR663I Your choice: 'c'
BR259I Program execution will be continued...
BR291I BRBACKUP will be started with options '-p initPRD.sap -d tape
E'
BR280I Time stamp 2008-04-04 18.44.29
BR670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to
c
BR280I Time stamp 2008-04-04 18.45.13
BR257I Your reply: 'c'
BR259I Program execution will be continued...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
BR051I BRBACKUP 6.20 (113)
BR189W Expiration period equal 0 - backup volumes could be immediate
BR055I Start of database backup: bdxpzadt.ant 2008-04-04 18.45.13
BR319I Control file copy was created: /oracle/PRD/sapbackup/cntrlPRD
BR280I Time stamp 2008-04-04 18.45.13
BR057I Backup of database: PRD
BR058I BRBACKUP action ID: bdxpzadt
BR059I BRBACKUP function ID: ant
BR110I Backup mode: ALL
BR077I Database file for backup: /oracle/PRD/sapbackup/cntrlPRD.dbf
BR061I 25 files found for backup, total size 45884.883 MB
BR143I Backup type: online
BR113I Files will be compressed by hardware
BR130I Backup device type: tape
BR102I Following backup device will be used: /dev/rmt0.1
BR103I Following backup volume will be used: PRDB04
BR280I Time stamp 2008-04-04 18.45.13
BR256I Enter 'c[ont]' to continue, 's[top]' to cancel the program:
c
BR280I Time stamp 2008-04-04 18.45.50
BR257I Your reply: 'c'
BR259I Program execution will be continued...
BR208I Volume with name PRDB04 required in device /dev/rmt0.1
BR210I Please mount BRBACKUP volume, if you have not already done so
BR280I Time stamp 2008-04-04 18.45.50
BR256I Enter 'c[ont]' to continue, 's[top]' to cancel the program:
c
BR280I Time stamp 2008-04-04 18.46.26
BR257I Your reply: 'c'
BR259I Program execution will be continued...
BR280I Time stamp 2008-04-04 18.46.26
BR226I Rewinding tape volume in device /dev/rmt0 ...
BR351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR355I from /dev/rmt0.1 ...
BR241I Checking label on volume in device /dev/rmt0.1
BR280I Time stamp 2008-04-04 18.46.26
BR226I Rewinding tape volume in device /dev/rmt0 ...
BR202I Saving /oracle/PRD/sapbackup/.tape.hdr0
BR203I to /dev/rmt0.1 ...
BR209I Volume in device /dev/rmt0.1 has name PRDB04
BR202I Saving init_ora
BR203I to /dev/rmt0.1 ...
BR202I Saving /oracle/PRD/920_64/dbs/initPRD.sap
BR203I to /dev/rmt0.1 ...
Let me know If you have any problem regarding backup & restore
karan

Please tell me the step by step process of backup and full restore recovery

Dear all,
we are using ECC5.0 and windows 2003 and oracle 9i .Please tell me the step by step process of backup and full restore . I am using DB13 for backup and taken the backup. Please suggest.
Best Regards,
Thiru

Hi,
Please refer to following link
SAP on Oracle - Backup and Recovery [original link is broken]
Hope this helps.
Manoj Chintawar

Please tell me the procedure .

I am using eclipse IDE.
I see a.java and b.java file in my eclipse IDE.
Now i put c.java and d.java in the same physical location side by side to a.java and b.java
But , i dont see those in the eclipse IDE !!
i want those files inside the IDE...what needs to be done ?
please tell me the procedure .
thanks

Right click svn update only two actions!!!!
cmd = open prompt cd to dir then svn
Thats three!!!
That extra moment could be priceless lolIf you're used to working with command-line tools, you'll have at least a couple of shells open all the time anyway. I always have a few, one of which is already at the root of whatever source code I'm working on. The shell has all the common tasks in it's history, so a quick tap on the up arrow and you're there :-)
Plus, I'm not using Windows so Tortoise is irrelevant anyway

Please tell me The Procedure to open apple reseller store

Hiii,
I am a post graduate in Inetrnational Business And Marketing From Amity university (india) . I want to open apple reseller store or a service center. please tell me the procedure and investment
Thanx
Ankit Sharma
<Email Edited by Host>

I'm afraid I can't offer you good news. I quote:
'Apple is not currently accepting reseller or service provider applications. Please check the Apple Channel Programs page periodically for new information.'

Please tell me the way to find the person who has booked the conferenceroom

HI All,
When i am trying to book a conference room. it was showing the status a s busy in zimbra.But i am not able to find the person who has booked the room ?? how do i know the person who has booked teh conference room??if i can know that person i can negiotate with him abt the room.
please tell me the way to find the person who has booked teh conference room ?????
Thanks in advance
Venugopal

Hi Venugopal,
If you add approvers using beekeeper for that resource AND that you use Outlook, you can see who is 'in charge' of that resource, ie the person that will hand over the keys to that room when you need them. That person is the only one who may be able to tell you who has booked the resource, you can then go and 'negociate' ;o)
In Zimbra (1.5.1.5) you can't see the contacts..
hth
David

Please tell me the significance of the alphanumerics in the serial number of my sound ca

Similar Messages

Maybe you are looking for