Please vote using the forum poll!
At the right side of this forum page, you will find a forum poll "Do you generate UIX or JSP pages with JHeadstart?". Please vote, this information is important for us with regards to future upgrades to JSF / ADF Faces. You can vote one time for each application that you have built / are building with JHeadstart.
Thank you all!
Steven Davelaar,
JHeadstart Team.
Hey Jeff just wanna thank you for taking your time making this post. I just wanted to say hopefully it will help a lot of people. But awhile ago I was thinking and probably will start soon a FAQ post where I add in the most commonly questions people post in here. For example:
What is the best protective case for the Nano?
*List many good sites with good cases*
How Do I reset my Nano?
Answere here...can't think on top of my head
Why wont my Nano turn on?
Reset
Of course it will be more detailed but you see my point?
Similar Messages
-
Tips for using the Forum - please read
I saw this posted on another forum and thought it might help people here understand how to use the Forum and get more benefit from being here:
Forum Tip: to reply to a post, please use the "Reply" button next to the message (the arrow button, second from the left), not the "Reply to the Original Message in this Topic" link.
Forum Tip: if you have a problem and would like the best personal attention from experienced forum members do not Hi- Jack someone else's post in an attempt to solve your own problem..... start your own topic.... on the surface a lot of problems appear exactly the same..... they very seldom are.... by all means add to someone else's thread but do not use it as a means of solving your own problem.
Forum Tip: try and describe your problem in your topic heading..... things like 'HELP' are useless.... many good people may pass your post without reading it.... and please, please supply vital info..... what computer, system, application.... version of.... what have you done to fix the problem..... give a full description of the problem and no SHOUTING or bumping allowed.
Forum Tip: I would also add that it is important that you proof-read your post asking for help before you hit that "post message" button. But if you do make a mistake, or discover that your post is unclear then use the "Edit" button to make changes. The "Edit" button is the one with the pencil on it.
Forum Tip: What do the different buttons by each message do?
From left to right, the function of each button is explained below: ??Envelope icon = Email this post. ?Curved arrow = Reply to this message. ?Pencil icon = Edit this message. ?Trash can = Delete this message. ?Purple ribbon with small + sign = Bookmark this post. ?Large - sign = Rate this post negative. ?Large + sign = Rate this post positive. ?Blue or gray bar = Display the ratings on this post. ?
Pause the mouse pointer on an icon and Help will be displayed.?
Forum Tip: From the Apple Help and Terms of use files.
State your question clearly. Include as much information as you can about your issue.
At minimum, include:
The operating system you're using and its version.
The names and versions of other relevant products.
A complete description of computer and connected peripherals.
What you were doing when you ran into this issue.
Example: I'm using Mac OS X 10.3.4 on a 20-inch flat panel iMac with 768 MB of RAM and 15 GB free space on my hard disk. I have an X-brand PDA connected via its USB cradle. iCal 1.5.2 unexpectedly quits when I add an event.
Forum Tip: Test your answer. Make sure your answer works on your own computer before you post it. Do not guess.
Forum Tip: Spend some time reading the discussion forums before you post. In the case of the most common problems the question has already been answered and you can find the answer by using the "Search" field in the upper right corner of the page. A simply search on the forms will provide a solution to this problem.
TIP: Use the Apple Knowledge-base and Support pages for individual products. All of the most common problems can be solved by articles already posted to the K-BASE. Here is the link to the article providing the answer to the above example: Some songs in your iTunes library aren't copied to your iPod.
The Apple Support Pages are a wealth of information that can help you solve problems and learn about your Macintosh and Apple products.
Forum Tip: If you post a problem on the forums and then later on found the solution to it by yourself, and no one has posted in your thread, feel free to post in your thread letting others know how you solved the problem. This may help others who would otherwise need a solution for the same similar problem you had.Hey Jeff just wanna thank you for taking your time making this post. I just wanted to say hopefully it will help a lot of people. But awhile ago I was thinking and probably will start soon a FAQ post where I add in the most commonly questions people post in here. For example:
What is the best protective case for the Nano?
*List many good sites with good cases*
How Do I reset my Nano?
Answere here...can't think on top of my head
Why wont my Nano turn on?
Reset
Of course it will be more detailed but you see my point? -
Being signed out **while I'm using the forums**
I know these forums automatically log you out when you close the browser and don't have an option to stay logged in, but they are now doing something even more annoying, I'm am being signed out while I using the forums!!! Sometimes, this can be a little as a 5 minutes after I signed in
I can be reading through a thread when, for no obvious reason, the browser window blanks and the page reloads - and I've been signed out.
This is a real PITA. Is anyone else seeing this?HI,
I tend to use Firefox for everyday stuff and have used version 3 through 13 on various OS versions form Panther through Lion.
I occasionally sign in via Safari again across several versions without any issues.
I have an issue in Lion where the wireless Mouse that came with my iMac is a bit over sensitive to me trying to take hold of it for corrections and interpreting my finger movements and scrolling strokes.
This causes the "Do you want to Leave Page" message that I can not always get rid of.
Force Quitting will solve the drop down not accepting I don't want to leave, for about 20- 30 presses but Firefox will actually login in automatically when I restart it.
I would tend to look for "Breaks" in your Internet service, particularly if you are using WiFi as this can be upset by interference from other nearby routers.
9:30 PM Sunday; July 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
For the life of me I cannot figure out how to use the forum when I need information that does not apply to specific hardware or software. For instance I am trying to learn more about what harm comes about from spikes in voltage. I am participating in Folding at Home, a Stanford cooperative project seeking to find causes of serious deseases. I have been told that running these projects could damage the hard drive under certain voltage spikes.
Where can I find such information?Be aware that no surge protector will protect against a direct lightning strike. See my user tip here:
http://discussions.apple.com/thread.jspa?threadID=974986&tstart=30
Your best bet if you want an extended time to be always on, is to find some way to stay totally off grid. -
Welcome to the HP Support Forum!
This forum is a great place to get your questions answered as well as learn how to get the most out of your HP products. If this is your first time in our community, you have come to the right place to learn how the Forum works.
Let’s begin with the basic structure of the Forum. The forum is divided into Categories, as in the screenshot below, so that you can easily choose an area relevant to your query.
Each of these Categories, are further divided into Boards, based on specific type of issues or queries. For example, if you click on the + sign beside the Laptop & Notebook Computers category, it will expand and show its boards as below:
You can just go right into any of the boards, search for a particular issue or create your own post.
However, if you have used the Search the Community box at the Forum home page, you will be on the Search Results page, where you can create a post directly.
In this case, you will have to choose a board, while you are creating a post, from the Select Location drop-down menu.
Before you delve deeper into this board to find more information about how the Forum works, here are a few things to keep in mind.
Before you create a post, to get the quickest, most accurate response from the community, please include the following in your post:
A brief Subject title including:
Product Name
A short description of the problem
A detailed message with the following information:
Product Name and Operating System
How do I find my product name and number?
Description of the problem including:
Error messages, if any
Any changes made to your system before the issue occurred
Do not include the product serial number or any private information.
Read more in here: Advice for Asking the Very Best Question
You may also be interested in some short videos that show:
How to search the forum to find the answers you are looking for;
How to join it so that you will be able to ask a question; and
How to make post and where to post it to get a timely response.
You don’t have to be a member to search for answers. However, you will need to register if you want to post a question.
There is a lot of information in this board that may help you get the most out of your time on the Forum. You can click here to go back to the main Forum page.
Should you have any suggestions or feedback on the site feel free to add comments in the Forum Feedback and Suggestions board.
We look forward to hearing from you.
HP Forums Team
Want to help? Become an Expert!
I am an HP employee.Welcome to the HP Support Forum!
This forum is a great place to get your questions answered as well as learn how to get the most out of your HP products. If this is your first time in our community, you have come to the right place to learn how the Forum works.
Let’s begin with the basic structure of the Forum. The forum is divided into Categories, as in the screenshot below, so that you can easily choose an area relevant to your query.
Each of these Categories, are further divided into Boards, based on specific type of issues or queries. For example, if you click on the + sign beside the Laptop & Notebook Computers category, it will expand and show its boards as below:
You can just go right into any of the boards, search for a particular issue or create your own post.
However, if you have used the Search the Community box at the Forum home page, you will be on the Search Results page, where you can create a post directly.
In this case, you will have to choose a board, while you are creating a post, from the Select Location drop-down menu.
Before you delve deeper into this board to find more information about how the Forum works, here are a few things to keep in mind.
Before you create a post, to get the quickest, most accurate response from the community, please include the following in your post:
A brief Subject title including:
Product Name
A short description of the problem
A detailed message with the following information:
Product Name and Operating System
How do I find my product name and number?
Description of the problem including:
Error messages, if any
Any changes made to your system before the issue occurred
Do not include the product serial number or any private information.
Read more in here: Advice for Asking the Very Best Question
You may also be interested in some short videos that show:
How to search the forum to find the answers you are looking for;
How to join it so that you will be able to ask a question; and
How to make post and where to post it to get a timely response.
You don’t have to be a member to search for answers. However, you will need to register if you want to post a question.
There is a lot of information in this board that may help you get the most out of your time on the Forum. You can click here to go back to the main Forum page.
Should you have any suggestions or feedback on the site feel free to add comments in the Forum Feedback and Suggestions board.
We look forward to hearing from you.
HP Forums Team
Want to help? Become an Expert!
I am an HP employee. -
Please start using the new box on Brookhurst Rd (M...
why hasn't BT put the new 3 yr old jctn box on Brookhurst Road into service when BT knows there a problem with the old one which keeps flooding so we keep losing service and we get no compo for the loss of service
Hi Jacmarczacc
I can see you have been contacted with an offer of help and will be contacted with more information on the 30th.
Let us know how you get on.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
How to use the forums and get (helpful) help!
Please, I beg you, read the Javadoc on the class you are asking about:
http://java.sun.com/j2se/1.4/docs/api/index.html
Have you looked for an answer in Suns training documentation, tutorials and Java specification?
http://developer.java.sun.com/developer/infodocs/
Post your code so that it is readable:
http://forum.java.sun.com/faq.jsp#messageformat
Of course, is everyone followed these rules (including me) these forums would probably be a very lonely place ;)You either use single quotes in the SQL string, or (my preferred method) use a Prepared Statement
String sql = "select count(cc.id) from customers c, creditcards cc where c.cc_id = '" + ccID+ "' ";
// or better IMO
sql = "select count(cc.id) from customers c, creditcards cc where c.cc_id = ?");
PreparedStatement pstmt = con.prepareStatement(sql);
sql.setString(1, ccID);The prepared statement protects you agains SQL injection attacks, and any values that would need escaping in SQL. What would happen if someone entered a single quote in the ccID field? -
I used to use it everyday befor the change. I just cannot figure out how to simply search through the thread topics for Flex only. I thought changes would make it easier, this is amazingly difficult.
It is a little bit of a pain, but in the upper right corner, there is the search function. I do so (entering my search term), then Once the results show up, there is a "More options" link. In there you can narrow down which forum to search.
I actually book marked this page so that I can go right to the page where I have the search fields where I can narrow down my results. -
Important! Please use the public forum for your questions!
Dear forum visitors,
Please always use the forum mechanism to ask technical, workflow and creative questions and do not contact me and other Community Experts or Adobe employees with private messages. We all appreciate your trust and respect for our work, but there are two things you should consider:
- Just like you, we all have a "normal" life. Sending private messages does not accelerate the process, if we are not around. Just like I was not here the last 24 hours 'cos I was visiting my grandmother and then dancing the night away, others have children and a family to take care of. And I think a bit of sleep is okay every now and then, too.
- Results from private messages are not covered by the search engine and archiving mechanism for apparent reasons. Therfore at some point that info will be lost and future visitors looking for help will not be able to find it, meaning that we will have to answer the same questions over and over. This can of course not always be avoided, but in the interest of everyone, we should try to cut down redundancy and spent our time as efficiently as we can. Personally I don't get paid for this, so I'm investing my spare time. Again, I think doing a few other things in it instead of constantly monitoring forums would be okay...
Thanks for your understanding.
MyleniumHello
Iam tryn to use Adove but its telling me tha i
h ave to accep end user license how can i do that can some one please help -
Please vote for documentation on using servlets in ColdFusion
There is at present little to no documentation on using servlets directly in ColdFusion 10. The little documentation there is, is wrong. Please vote for the bug report.
27-Oct-200702:06 AM
weera wrote:
Voted..
And I hope it will be come true..
Thank you at least for upcoming Eseries models.
Abdullah Ibn Hamad Al-Marri AKA Awesome
Arab Portal
Phones: Waiting for E9x with Scheduled SMS on it, and 9300i features.. -
I have also tried iinstalling while my camera is unplugged (Logitech); with my firewall blocked; After re-starting; & still no luck!
The details are as above. If you need other info, please ask.Use the instructions in the following article to reset your User Agent.
*See --> [https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
*What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
Also see -- > [https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version Finding your Firefox version]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
How to sign in to the forum using Firefox w/ NoScript
Apparently this site uses "suspicious cross-site POST requests" according to NoScript in Firefox.
Until this changes, you'll need to tweak the NoScript settings a little in order to be able to sign into your community.vzw.com account with NoScript XSS sanitizing enabled. (I'll assume you've already allowed scripts from vzw.com and/or lithium.com - I'm pretty sure you'll need those enabled in order to use the forums at all)
1) Open your NoScript options in Firefox:
Tools -> Add-ons -> Extensions (tab) -> NoScript -> Options
2) In the NoScript options click the "Advanced" tab.
3) In the advanced tab click the "XSS" sub-tab.
4) In the "Anti-XSS Protection Exceptions" text box on the "XSS" tab add the following line:
^https://signin\.verizon\.com/sso/authsso/forumLogin\.jsp.*$
5) Click OK and then close the Add-ons window.
6) Close your tab/window for community.vzw.com and try again.
7) If this doesn't work you may also need to delete any cookies you have from vzw.com and/or close Firefox all together and try again.
Details on the problem, how I identified it, and how I came across this solution
For the past two days I've been trying to get my community.vzw.com account setup and running and no matter what I tried, I would always end up on a screen that said my user name and password was invalid. To add to the confusion I was able to reset my password on the account using the "Forgot username/password" link and it STILL wouldn't work.
Then I noticed that for a split second right after I press the enter key to login there is a small notification bar at the top of the browser window. It goes away too fast to read, but I was able to notice the "NoScript" icon on the bar before it disappeared. So, I enabled scripts globally in NoScript and STILL had the same problem. Disabling/Removing NoScript all together fixed the problem and I was able to login. Of course that's not an acceptable solution, but at least I knew for sure that the problem was being caused by NoScript now.
Recalling past situations with sites not playing well with NoScript I remembered that there were NoScript messages logged in the Firefox error console (Tools -> Error console) when some actions are blocked. So, I enabled NoScript again, tried to login, opened the error console and sure enough, there's a message saying:
[NoScript XSS] Sanitized suspicious upload
to [https://signin.verizon.com/sso/authsso/forumLogin.jsp<some data here>]
from [http://www22.verizon.com/content/sso/signin.aspx?<some more data here>]:
transformed into a download-only GET request.
So, I took the URL from the "to ..." section of the message and entered it into the equivalent regular expression into the exceptions and tada! It worked! I can now sign into the community forums and still have the protection of NoScript to keep me safe from other sites.
Enjoy!Wow! What a nice description of the issue you are having and resolution steps! I have also passed this along to our IT folks to have a look.
Thank you for being so thorough I am sure there are others that may run into this! -
say i have the MIMO model of a system in transfer function as
4s + 4 0
10s+1
= G(s)
0 3s + 3
10s+1
this model has direct feedthrough. how do i run simulations of to say, a 2 step inputs?
I don't get any output signals. please, see attached VI file.
thank you.
Attachments:
Q1 test.vi 56 KBHi tomcruize79
Thanks for using the forums! Sorry for the delay in getting back to you - how have you been getting on with this?
One thing to note is that you can use the Signal Generator VI to generate a function as an input. Try this with your model and let me know how you get on.
Regards,
Peter D -
Strange things in the forums access
I have a question about Bing SpeechRecognizer control. I have a problem on where I should place that question.
http://social.msdn.microsoft.com/Forums/en-US/82fe9172-5de1-4430-ae68-da4d48bed6bd/problems-with-new-bing-speech-recognition-control?forum=toolsforwinapps
recommends the
http://social.msdn.microsoft.com/Forums/en-US/bingdev/.
When I follow this link, I see the "category=bing&forum=bingdev", yet I can't post the question until I select the forum.
There is no "Bing" in the category list so I can't find correct forum.
Please tell me how I should use the forum
Here is the question itself. First line is the subject, the rest is the text:
problem with Bing SpeechRecognizer
I am playing with Bing Speech Recognition Control web search sample (http://code.msdn.microsoft.com/Bing-Speech-Recognition-210c8978).
I have obtained the credentials from Windows Azure marketplace and tried to run the application.
The result is:
System.UnauthorizedAccessException: Access to the service is denied.
at Bing.Speech.ExceptionHandler.HandleConnectionException(Exception ex)
at Bing.Speech.SpeechRecognizer.<EstablishCUConnection>d__15.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Bing.Speech.SpeechRecognizer.<ConnectToServiceAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Bing.Speech.API.NlApiOperation.<<RecognizeSpeechAsync>b__26>d__2a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Bing.Speech.API.NlApiOperation.<>c__DisplayClass2`1.<<Run>b__0>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Speech_API_sample.MainPage.<SpeakButton_Click>d__1.MoveNext()
thrown from the RecognizeSpeechToTextAsync.
Could you please explain what it could mean and how to use the SpeechRecognizer.RecognizeSpeechToTextAsync?
The documentation is silent about it.http://social.msdn.microsoft.com/Forums/en-US/bingdev/.
When I follow this link, I see the "category=bing&forum=bingdev", yet I can't post the question until I select the forum.
There is no "Bing" in the category list so I can't find correct forum.
When I tried it I saw: No results were found. So I suspect this is some kind of branding issue. Or maybe the content has been moved...
Starting from the MSDN brand and choosing View All, then doing a search for BING, then checking everything that matched (7 apparently), then clicking Submit finds: 9159
Perhaps you will find somewhere in there something that you could tack a Me too! onto? <eg>
Nope. But now I see where the Answerer probably got misled first:
http://www.bing.com/dev/en-us/support
Forums seem to be deprecated for Blogs. E.g. trying to force use of forums will take you to where you ended up or to Answers. See if you can get anywhere on the search blogs tack.
http://www.bing.com/blogs/search/#domain=bing.com/blogs&q=speechrecognizer
In fact, that may be pointing to a Visual Studio Q&A discussion
http://visualstudiogallery.msdn.microsoft.com/521cf616-a9a8-4d99-b5d9-92b539d9df82
Robert Aldwinckle -
When to use the billing live chat team
The BTCare Community Forum is a place where customers can ask and answer questions about BT’s products and services.
If you need advice with your BT bills, please use oursearch facility first to see if someone else has already posted an answer to your question.
If you can’t find the advice you were looking for, post the details of your question on the forum to get help and advice from fellow forum members. Remember not to include any personal or account details though!
We know that there will be some occasions when a customer will have a question relating to their account that only BT can answer, and if you need direct help from BT about your bill you can use our billing live chat facility, but also you should note that the advisor at the end of the live chat can only deal with simple billing queries, so don’t forget to consult the community first before using the live chat function.
Please only use the billing live chat if you need direct help from BT and your query relates to your bill and account charges. If you have a general question or you think your question can be answered on the forum, please post it on this board instead.
When not to use the billing live chat
Below are some examples of when not to use the billing live chat:
- To place an order. Go instead here if you’re a new customer, or if you’re an existing customer;
- To report or get an update on a fault. Instead click here ;
- To reset your passwords. Click here on advice on how to reset your password.
If you still need help from BT about any of the above, please contact us.
How to contact the billing live chat team
Click on this banner for help with your bills.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.You need to download the additional content via the Logic Pro/Download Additional Content menu item in Logic's menu bar...
Maybe you are looking for
-
How to upgrade the patches in ACS 5.1
I want to upgrade the acs 5.1 in distributed system. We have one hub/ primary ACS and two other spoke / secodary acs. I have following querry. Will it be possible to upgrad only one Secondary server.> Will updated secondary ACS will able to sych it c
-
The recommended resolution for the Windows and Microsoft programs is 1600 x 1200. Windows and the Microsoft Office suite programs appear in a workable resolution. However, Firefox is so small at this resolution that it is hard to work with. If I chan
-
How to export/import database?
If I have an export file from database PROD and want to import to database DEV. How to do that? Do i need to create an empty database as target database? both database are using orapw files. I'm using oracle 8.0.5 in unix.
-
warning:suid system, what going on?
-
ITunes Interactive booklet size.
Recently d/l an album from the music store, and the included interactive booklet shows up in the small window in the lower left of the screen, but the option to see it full screen in greyed out and double clicking the image won't make it any larger.