Pls check release classes

Dear all ,
when i create release group for pr when i assign it to class an error msg come pls check release class(msg no me492)
i create new release group & new release class which was not earlier created
release group            rel obj              ovrr                             class
zo                               1                        x                                 zpr_overall
zi                                 1                      -                                 zpr_itemwise
pls guide how to resolve this.
Regards
Amin

Answered

Similar Messages

Release object / release class

Hello Sapians....
I am trying to creat new class and assign it to new Rel Grp. but I am facing this error and does not let me save.. Please guide wht is the solution..
*Please check release classes (see long text)*
                                                                                *Message no. ME492*
                                                                                *Diagnosis*
                                                                                *Here you can assign release groups to release classes. Only one release*
     *class should be used within the release groups for overall release and*
     *the release groups without overall release in each case. However, in*
     *this instance several release classes have been used.*
                                                                                *Procedure*
                                                                                *Assign the release groups that were created for overall release to one*
     *release class only. Assign the release groups that were not created for*
     *overall release to a different release class.*
Thanks
Hiren

hi Hiren
U can use only one release class for Release strategy i.e 1 for PR 1 for external Purchase document ( PO,outline agreement,RFQ, and 1 for service
in your case u are trying to use two diff classes for same release group which is not possible
U can use only one class in service release per release group
Vishal...

Purchase requisition : problem with check release Strategies

Hi all,
i created a new class, new release group, new release codes etc. I think all is ok but when i launch the transaction OMGQCK for check release Strategies the system give me an error in node 'Check re release indicators' : Define a release indicator for the status "released".
But how can i do that, i created two release indicator : 'X' for blocked and 'V' for launched but what are the options for purchase requisition ?
Is there a special value to give the release indicator 'released' ?
Thanks for your help.
Edited by: ToraTora on Mar 31, 2011 5:46 PM

Hi,
Goto SPRO -> Materials Management -> Purchasing -> Purchase Requisition -> Release Procedure -> Procedure with classification -> Setup Procedure with Classification
select release indicator
by default, you will be having the following release indicators in the system,
1     Request for quotation
2     RFQ/purchase order
3     RFQ/PO no change of date
4     RFQ/PO no changes
A     Fixed RFQ
B     Fixed RFQ/purchase order
X     Blocked
please check whether you have got these or else create and then assign them to the release strategies.

Your call cannot be connected pls. check your phone settings help plsss

your call cannot be connected pls. check your phone settings help plsss

mhayo wrote:
your call cannot be connected pls. check your phone settings help plsss
Check the Telephone Number you are calling...
Contact your Carrier.
Also...
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

ALE methodology to transport the release class

How can I use ALE methodology to transport the release class, release characteristics and release characteristic value assignment from one client to another client ?
please explain with clear steps.

Hi
Step 1: Move Characteristics to the target system/client (ALE).
i). In the source system/client, execute transaction BD91
This generates one idoc (logical message type CHRMAS) for each characteristic.
ii). In the source system, check the status of the outbound idocs using transaction WE05, selecting message type CHRMAS.
All outbound idocs should be in status 03 (Data Passed to Port OK).
iii). * Only exception is when target system is D94 client 110. In this case the idocs go to status 30 (IDoc ready for dispatch) and an extra step is required to release the idocs to the target system. In this case, using transaction SE38, run report RSEOUT00 to release the idocs.
iv). Check that the idocs were received and posted in the target system:
Log on to the target system & execute transaction WE05, selecting logical message type CHRMAS.
v). If any idocs are in status 64, run transaction BD87 to re-process these to status 53.
Step 2: Move Classes to the target system/client (ALE).
In the source system/client, execute transaction BD92
This generates one outbound idoc (message type CLSMAS) for each Class.
Step 3: Check Config & classification data in target system/client
Hope it helps
Thanks /Karthik

Why can we only use 1 release class for overall Release of Purchase Req?

Hi,
After realizing that it would be beneficial to use more than one release class for overall release of Purchase Requisition with classification, in use with release groups for overall release, I now ask if someone knows why SAP has chosen to only allow 1 release class for overall release of Purchase Requisition?
In my scenario I would like Release group US, used for release strategies for US-plant to be able to use 1 release class with a specific set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_USD including a characteristic PR_TOTVAL_USD looking at CEBAN-GFWRT. The chosen currency for this characteristic would be USD.
I would then like to allow Release group FR, used for release strategies for FRANCE-plant to use another release class with another set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_EUR including a characteristic PR_TOTVAL_EUR looking at CEBAN-GFWRT. The chosen currency for this characteristic would be EUR.
In this way the release strategies for the respective release groups US and FR, could maintain their overall limit values in their respective release strategies in their own currencies.
1. Observe that I do not want to use the same Release class for both release groups for overall release, even though I know that this is currently the only allowed option, as far as I've understood.
2. Observe that I do not want to specify the two characteristics PR_TOTVAL_USD and PR_TOTVAL_EUR for overall value in the same release class, as this would lead to double maintenance for a large number of release strategies. Also consider the maintenance when new countries with new currencies want release strategies.
3. Observe that I only want to use overall release.
What I'm trying to avoid is having to continuously translate local business USD overall value limits to limits in the currency chosen for the overall value characteristic. If this for example is specified in DKK, this would lead to a need to adjust the overall value limits as soon as the exchange rate between USD and DKK changes in the system.
Please consider this simple example:
Local requirement is that USD purchase requisitions should be blocked when the USD value is above 1000 USD. However in my release strategy I would have to maintain a value of >5365 DDK, if DKK is chosen as the currency for overall characteristic.(e.g exchange rate 5,365).
Next month the currency exchange rate in the system between USD and DKK has changed, and therefore I would have to go into CL24N and maintain the value to reflect the new exchange rate between USD and DKK. Lets say it has gone up to 5,435. I would now have to maintain a value of > 5435 DKK in my release strategy to correctly reflect the local business requirement of 1000 USD.
So if anyone could please explain why SAP has taken the decision to make the Release class for overall release client specific that would be much appreciated and awarded accordingly. Also if you have any suggestion on how I could obtain the above scenario on maintaning overall value limits in different currencies than that would be awarded to.
BR Jakob F. Skott

You can give feed back to Apple from the iTunes drop-down menu in the iTunes menu bar..
You can also contact the iTS Customer Service from the links on this page - http://www.apple.com/support/itunes/store/
MJ

Check Release Monitoring in SAP B1 8.8

Hi Experts,
Is there a standard functionality in SAP to monitor check releasing? TIA.

Hi bryanv,
Go to Banking / Incoming Payment / Check Register For Incoming Cheque
Go to Banking / Banking Reports / Check Register Report For Outgoing Cheque
Thanks,
Srujal Patel

I HAVING PROBLEM IN THE PHOTO. THIS PROBLEM CAUSE ME TROUBLE IN PRESENTATION. PLS CHECK CASE NO 530618429

I HAVING A PROBLEM ABOUT THE PHOTO APPS. THIS ISSUE CAUSE ME A LOT PROBLEM IN PRESENTATION, AND I DID CALL TO YOUR SERVICES CENTRE TO COMPLIANT ABOUT THIS ISSUE. PLS CHECK THE CASE NUMBER 530618429.
I'M WAITING FOR THE NEW IOS UPDATE, BUT EVERYTIME UPDATED DIDN'T SOLVE MY PROBLEM.
WHAT IS HAPPENING?
WHO CAN HELP ME?

This is a user to user forum: nobody here works for Apple, and we have no access to your case details. You are going to have to explain what your problem is if you want help from here. Please refrain from posting in all capitals.

HT201209 i asked for the new apple ID and i got the message that pls check with itune support to complete transaction. what can i do?

i asked for the new apple ID and i got the message that pls check with itune support to complete transaction. what can i do?

Contact iTunes Support to complete this transaction.
http://www.apple.com/support/itunes/contact/

We are unable to sign in to iMessages, wifi connection is fine but we get the error message, pls check your network connection

we are unable to sign in to iMessages, wifi connection is fine but we get the error message, pls check your network connection. Does anyone know how to fix this

there has been a big problem with facetime and imessage. The best solution for this case is to restore your device http://support.apple.com/kb/HT1414
Make sure you back it up. and I would set up facetime before you reinstall your backup and make sure its working.

Pls check the calc script requirment

Pls check this calc reqirement and do the needful help
we have got 700000/- INR in your bank You can spend the money but there are rules of spending.
1. we can start withdrawing Rs 1000 only in each month.
2. The Money can be withdrawn only from November 2011
3. This facility is only valid upto next 7 months.
At the end of the seventh month your bank Pass book must show:
Jan Feb Mar Apr May June July Aug Sep Oct Nov Dec Jan Feb Mar Apr May June July
1 1 1 1 1 1 1
(1 = 1000 Rupees as required)
Note : Year changes here after December. Take care of this in logic.
You can think of standard dimensions a planning application has :
1. Accounts
2. Period
3. Scenario
4. Version
5. Entity
6. Year
7. And Many more if you wish

GG what do you think is the cause of the error of this code below which i used for testing.....
declare
v_alltables varchar2(10000);
begin
for rec in (select TABLE_NAME from all_tables where owner = 'APPS' AND ROWNUM =1)
loop
execute immediate 'SELECT DBMS_METADATA.GET_DDL( '|| '''TABLE'',' ||rec.table_name||',''APPS'') FROM DUAL' into v_alltables;
dbms_output.put_line(v_alltables);
end loop;
end;
it gives this error message when run:
Error report:
ORA-00904: "ADX_PRE_AUTOCONFIG": invalid identifier
ORA-06512: at line 7
00904. 00000 - "%s: invalid identifier"But when i change the rec.table_name into '''ADX_PRE_AUTOCONFIG''' the code works properly.
so i decided to have this code and it works.
SET SERVEROUTPUT ON
declare
v_alltables varchar2(10000);
begin
for rec in (select TABLE_NAME from all_tables where owner = 'APPS' AND ROWNUM =1)
loop
execute immediate 'SELECT DBMS_METADATA.GET_DDL( '|| '''TABLE'',' ||''''||rec.table_name||''''||',''APPS'') FROM DUAL' into v_alltables;
dbms_output.put_line(v_alltables);
end loop;
end;for you newbie, this must also work
SET SERVEROUTPUT ON
declare
v_alltables varchar2(10000);
begin
for i in (select table_name from all_tables where rownum<2)
loop
execute immediate 'SELECT DBMS_METADATA.GET_DDL( '|| '''TABLE'',' ||''''||i.table_name||''''||',''TRNG8305_GC'') FROM DUAL' into v_alltables;
dbms_output.put_line(v_alltables);
end loop;
end;hope it helps.....

How to Find Credit Check Released Sales Orders /Deliveries?

Hi Gurus,
How to Find Credit Check Released Sales Orders /Deliveries for a particular Customer.
Regrds,
Binayak
Message was edited by: Binayak
Binayak Ghosh

Hi,
You can chech inthe Tcode VKM2 Released SD documents, and VKM4 SD documents.
reward if useful
Regards
syed

Release class

Hi friends
Do we have any way to use Two release classes for PO?

hi,
> You can haveonly one release class....but you can have more than one release groups assigned to release class....
Hope it helps..
Regards
Priyanka.P

TS1702 I have installed a free application of educatsion category (my coloring prncil) which it said free. Anyway my account was charged and nothing come up to my ipad now. Pls check for me now and if possible i need to cancel my apple id now caz i feel n

I feel uncomfortable using apple account since last night i have created apple id and already charged for that. Also i downloaded one applicatiion (istorybook) which is said it free, and it was ok for last night. Today, just a few minutes ago, i have downloaded one more application which is said free but now i was charged form downloaded that applicatioin (my coloring pencil) and now it hasa not come up to my ipad. So i feel not so much secure using apple id which not the same as i used to have my apple id for Mac. Pls check for me, and if possible i need to cancel my apple id account. How can i do that?

User to user forum.
No Apple here.
We have no access to anything.
http://www.dummies.com/how-to/content/how-to-report-an-iphone-app-problem-from-y our-comp.html

Authority Check in Class Interface CMD_EI_API

I am using the class CMD_EL_API in order to create new customer.
The class is working very well, but there is a problem.
Not all the users that are going to utilize this aplicacion can have access to XD01 and XD02 and the class check the authorization on these transactions.
Error:
         You are not authorized to use Transaction XD01.
Already it was given them access to all the objects of the XD01 and XD02 but continues marking the same error.
It wold be able someone to indicate me that can be done.
Thank you
Blanca Segovia

Hi
This is a small program to start with this method. I hope you serve
report zcreate_cliente.
data: wa_company_code_st type cmds_ei_company,
wa_company_code type cmds_ei_cmd_company,
wa_customer type cmds_ei_extern,
wa_customers type cmds_ei_main,
wa_address type bapiad1vl,
wa_addressx type bapiad1vlx,
wa_central_data type cmds_ei_vmd_central_data,
wa_central_datax type cmds_ei_vmd_central_data_xflag,
wa_error type cvis_message.
constants c_update type c value 'M'.
start-of-selection.
free: wa_customer, wa_company_code_st, wa_customer.
wa_company_code_st-task = c_update.
wa_company_code_st-data_key-bukrs = 'A105'.
wa_address-name = 'Nombre Cliente'.
wa_address-country = 'MX'.
wa_address-langu = 'E'.
wa_address-time_zone = 'UTC-6'.
wa_customer-central_data-address-postal-data = wa_address.
wa_customer-central_data-address-postal-datax = wa_addressx.
wa_customer-central_data-central-data-ktokd = '0200'.
wa_customer-central_data-central-datax-ktokd = 'X'.
append wa_company_code_st to wa_company_code-company.
wa_customer-header-object_instance-kunnr = '0300002832'.
wa_customer-header-object_task = c_update.
wa_customer-company_data = wa_company_code.
append wa_customer to wa_customers-customers.
call method cmd_ei_api=>maintain_bapi
exporting
is_master_data = wa_customers
importing
   es_message_correct = wa_error.
if wa_error-is_error is initial.
    commit work.
endif.
Regards,
Blanca Segovia

Pls check release classes

Similar Messages

Maybe you are looking for