Plug-in(s) for Id program
I cannot successfully download and install the Id program? Which plug-in(s) do I need to download to achieve this?
Thank you for your attention.
I hope you don't really mean .imm for the extension -- that's and incredimail email file and won't open in ID. Files you can open in ID include .indd, .indt, .indb, .idml, .inx and .indl (not all of which represent documents).
I think, though, that your problem may be the Windows 7 Starter, though I don't honestly know why that would prevent the download. I'm pretty sure though, that even if you are able to get the download to complete you won't get the program to install on the Starter version.
If all you need is InDesign, or one or two of the other programs, and you don't intend to make a purchase, you should probably try downloading the individual trials, but if that's what you are doing now you might want to try downloading a suite package instead -- you can choose which components to try to install (see my concern about Windows 7 Starter above). Since your problem is with the Adobe Dowload Manager (and it give lots of users trouble), yiou miught want to try the direct download liinks at http://prodesigntools.com/adobe-cs6-direct-download-links.html. Be sure you read and follow the directions under Note: Very Important Instructions on that page. If you don't follow them exactly the download will not work.
Similar Messages
-
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Looking for a program that can handel import and export of palm doc files
I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld. -
AIR Plug-In Architecture For HTML/AJAX Development?
Hi everyone,
Doing an AIR project. Mentor suggested to do app with plug-in capability, "Great idea! i'll get sraight on it!!" but now..... not so good :'(
I would have a pretty strong background in programming for a student and would hate to srink to the challange but I can't find any documentatin on building a plug-in architecture for AIR? I have developed many apps during my studies but never one with any sort of plugin architecture.
Without any more background into my problem my question is..... does anyone know of any good documentation for me to follow or that i could look through and would set me on the right track in order to create this? Or could you explain briefly how you would go about creating this type of application?
Thank you so much for any help that anyone can give to me in advance, hope you all having a good day,
IrishAIRMax?
-
when i plug my iphone4s for charging it does not charge, i have to restart it in order to start charging?
Did the Firefox installation finish without problems?
You can check:
*http://kb.mozillazine.org/Browser_will_not_start_up
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
I have Lightroom 4 installed. I cannot download my CR2 files from the Canon 5D Mark III camera. I have downloaded Lightroom 5 thinking it was an update but it appears I have to pay for the program. Any ideas how I can get lightroom 4 to accept my CR2 files ?
The Canon 5D Mk 111 was supported from LR 4.1, see the link below. Just update LR to the latest version. See link below
Camera Raw plug-in | Supported cameras
Adobe - Lightroom : For Windows
Adobe - Lightroom : For Macintosh -
How to detect plug-ins path for Photoshop CC?
Hi
I downloaded new CC SDK but unfortunatelly in html doc there is not info how to detect a plug-in path for new Photoshop CC. Pdf doc also contains very old info (still for Photoshop 5.0)
- Could you advice how my installers can detect new Photoshop CC and detect a target place for plug-in installation? Forboth win and Mac cases.
- Is CC a pure 64bit windows app or it also can be presented into both C:\Program files and C:\Program files(x86) folders?
Thanks
MaximThank, Bartek, for your responce
I checked this approach for CS4. In my winRegistry there is not {06870682-6f3c-4b97-9143-f03e85c0 bd3e} key. Should it work only for CC?
Previously, I checked "HKLM\Software\Adobe\Photohsop" and found all presented PSD versions, like #12 for CS5, #55 for CS5.5 #60 for CS6. And Wow6432Node accordingly
Will this approach work if I will search for CC the key like "HKLM\Software\Adobe\Photohsop\80\PluginPath" ? (if I had PSD CC I could check it but I dont wan to install it yet for dont break my currect working environment)
Also, could you advise what it default installation path for Mac? Some like "/Applications/Adobe/Adobe Photoshop CC" ? Will CC have same plug-ins subfolder like previously versions?
Best regards
Maxim
PS. Ilya, it means what I should check bot 32 and 64 bit windows versions and for CC also? 32bit windows version of CC is still available? wot is <version> key for CC? 80? CC? Do you know what is default installation path for CC on Mac? -
I keep getting a message about a problem with the plug in container for firefox. what does it mean?
I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.
It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus. -
just coming from windows,i dont know if you call them apps or programs? im looking for something that will keep track of customers,money they owe,and money they pay.would be nice if it worked with the calendar and phone book but not necessary.thanks
You didn't provide the actual name of the Windows program you are using so that features or prices can be compared. What do you expect to pay for a program, or do you want to use an online system that has monthly fees?
I don't know of any inexpensive programs for the Mac that are specifically set up for Farriers, but there are many database type programs that might be adapted to your needs. GrandTotal, $79 - offers pretty good integration with the Mac Address Book and Calendar (especially if you get it bundled with their TimeLog program for an extra $10) and it also has an iPhone-iPad program that can read open and due invoices you've created with their program.
You could also take a look at Bento, $49 - from FileMaker, which also has a program for iPhone-iPad. They offer some invoice templates that you can download and modify.
Both of these companies offer free trials.
I haven't used either of these products, but I am looking for something with better integration with my iDevices. The Quickbooks Connect program for iPad only works with the Windows version of Quickbooks Pro 2011 and requires a monthly subscription. Windows users are still complaining about it's lack of features so I'll probably pass.
One of my clients has offered to buy my Quickbooks for Mac, and I might take him up on it if the GrandTotal program works out for me. The program is great, but not very nimble on-the-road.
Hope this helps. -
Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM
Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
SridharHello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi -
I have tried to shut off the DEP for the program but it is not allowed. I can't get to any of my music on my computer because of this. I use windows vista and was able to use ITunes until the upgrade to 10.2. now i can't even open the program and it is getting me very upset. Please someone help me.
Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
My phone has been asked to be plugged into itunes for the past hour or so, and it has been plugged in the whole time... i have tried holding in both buttons too turn it on and nothing is happening... whats wrong with it and how do i fix this :(?
Does iTunes see your phone?
Do you have a PC or a Mac?
~Lyssa -
How to improve performace for this program
Hi,
I want to improve performance for this program.Pls help me.Here is the code.
Thanks
kumar
--# SCCS: @(#)nscdprpt_rpt_fam_fweq_detail_aggr_dml.sql 2.1 08/17/05 12:16:11
--# Location: /appl/dpdm/src/sql/SCCS/s.nscdprpt_rpt_fam_fweq_detail_aggr_dml.sql
-- =============================================================================
-- Purpose:
-- DML Script to calculate aggregate rows from table NSCDPRPT.RPT_FAM_FWEQ_DETAIL
-- inserts one (1) monthly total row for each comparison type (6 of them)
-- Modification History
-- Date Version Who What
-- 28-Jun-05 V1.00 J. Myers Initial Version
-- 17-Aug-05 gzuerc Replaced UNION ALL code with INSERT's to avoid
-- Oracle error out of undo tablespace.
-- ============================================================================
-- NOTES:
-- This process pulls data from RPT_FAM_FWEQ_DETAIL table.
-- The target table RPT_FAM_FWEQ_DETAIL_AGGR is truncated by plan_ctry and loaded daily;
-- it is the data used in the Forecast Accuracy Measurements Report.
-- The input data is 'wide' (6 quantities), and this script outputs a single
-- row for each quantity as a 'thin' table (single column F1_QTY and F2_QTY shared by all quantities), and
-- with a ROW_TYPE = 'TOTAL'
-- Two (2) other scripts add additional rows to this table as follows:
-- 1) nscdprpt_rpt_fam_FWEQ_detail_aggr_sesn_avg_dml.sql => calculates the
-- total quantities F1_QTY, F2_QTY and AE for each LEVEL_VALUE
-- 2) nscdprpt_rpt_fam_FWEQ_detail_aggr_pct_swg_dml.sql => calculates the
-- percent swing in quantities between DISP_EVENTS for each grouping
-- of PLAN_CTRY, DIVISION, SEASON and TRG_EVENT_NUM for only LEVEL_TYPE = 'SUB_CAT'
-- =============================================================================
-- The result set from joining RPT_FAM_FWEQ_DETAIL rows with comparison types
-- is inserted into the table RPT_FAM_FWEQ_DETAIL_AGGR
INSERT INTO rpt_fam_FWEQ_detail_aggr
SELECT plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
disp_event_num,
max_event_num,
compare_name,
first_display_event_num,
level_type,
level_value,
'TOTAL' AS row_type,
material,
key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sty_colr_sdesc,
sty_grp_nbr,
sty_grp_desc,
matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
curr_prod_i2_life_cyc_cd,
NULL AS promo_ind, -- for future use
-- Each RPT_FAM_FWEQ_DETAIL row's eight (8) quantity columns are broken down
-- into F1_QTY from DISP_aaaa_QTY, F2_QTY from TRG_aaaa_QTY and
-- AE from aaaa_AE where 'aaaa' is equal to one of the COMPARE_TYPEs below:
-- F1_QTY
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
disp_dlvry_plan_qty
WHEN compare_type = 'NET' THEN
disp_net_qty
WHEN compare_type = 'NET_AO' THEN
disp_ao_qty
WHEN compare_type = 'NET_FTRS' THEN
disp_futr_qty
WHEN compare_type = 'NET_REPLENS' THEN
disp_replen_qty
WHEN compare_type = 'AUTH_FTRS' THEN
disp_auth_futr_qty
END as f1_qty,
-- F2_QTY
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
trg_dlvry_plan_qty
WHEN compare_type = 'NET' THEN
trg_net_qty
WHEN compare_type = 'NET_AO' THEN
trg_ao_qty
WHEN compare_type = 'NET_FTRS' THEN
trg_futr_qty
WHEN compare_type = 'NET_REPLENS' THEN
trg_replen_qty
WHEN compare_type = 'AUTH_FTRS' THEN
trg_auth_futures_qty
END as f2_qty,
-- AE
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
abs(disp_dlvry_plan_qty - trg_dlvry_plan_qty)
WHEN compare_type = 'NET' THEN
abs(disp_net_qty - trg_net_qty)
WHEN compare_type = 'NET_AO' THEN
abs(disp_ao_qty - trg_ao_qty)
WHEN compare_type = 'NET_FTRS' THEN
abs(disp_futr_qty - trg_futr_qty)
WHEN compare_type = 'NET_REPLENS' THEN
abs(disp_replen_qty - trg_replen_qty)
WHEN compare_type = 'AUTH_FTRS' THEN
abs(disp_auth_futr_qty - trg_auth_futures_qty)
END as ae,
SYSDATE AS zz_insert_tmst
FROM
-- The following in-line view provides three (3) result sets from the RPT_FAM_FWEQ_DETAIL table
-- This in-line view returns only LEVEL_NUM = 1 or LEVEL_TYPE = 'SUB_CAT' data
SELECT plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
trg_event_type,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value,
-- The following NULL'd columns' values cannot be saved due to aggregation
NULL AS material,
NULL AS key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
NULL AS sty_colr_sdesc,
NULL AS sty_grp_nbr,
NULL AS sty_grp_desc,
NULL AS matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
NULL AS curr_prod_i2_life_cyc_cd,
sum(disp_net_qty) AS disp_net_qty,
sum(trg_net_qty) AS trg_net_qty,
-- ABS(sum(trg_net_qty) - sum(disp_net_qty)) AS net_AE,
sum(disp_dlvry_plan_qty) AS disp_dlvry_plan_qty,
sum(trg_dlvry_plan_qty) AS trg_dlvry_plan_qty,
-- ABS(sum(trg_dlvry_plan_qty) - sum(disp_dlvry_plan_qty)) AS dlvry_plan_AE,
sum(disp_futr_qty) AS disp_futr_qty,
sum(trg_futr_qty) AS trg_futr_qty,
-- ABS(sum(trg_futr_qty) - sum(disp_futr_qty)) AS futr_AE,
sum(disp_ao_qty) AS disp_ao_qty,
sum(trg_ao_qty) AS trg_ao_qty,
-- ABS(sum(trg_ao_qty) - sum(disp_ao_qty)) AS ao_AE,
sum(disp_replen_qty) AS disp_replen_qty,
sum(trg_replen_qty) AS trg_replen_qty,
-- ABS(sum(trg_replen_qty) - sum(disp_replen_qty)) AS replen_AE,
sum(disp_futr_qty) AS disp_auth_futr_qty,
sum(trg_auth_futures_qty) AS trg_auth_futures_qty --,
-- ABS(sum(trg_auth_futures_qty) - sum(disp_futr_qty)) AS auth_futures_AE
FROM rpt_fam_FWEQ_detail
WHERE plan_ctry &where_plan_ctry
and level_num = 1 -- 'SUB-CAT'
-- AND (promo_ind <> 'Y' OR promo_ind IS null)
GROUP BY plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
trg_event_type,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc -- 'Type Group' in Brio
) dtl,
-- The following in-line view returns all of the different combinations
-- of comparison types in the RPT_FAM_FWEQ_DETAIL table
-- This select returns the pairing of all forecast types
SELECT event_type, compare_type, compare_name
from
(SELECT event_type, compare_type, compare_type_description || ' to ' || compare_type_description AS compare_name
FROM rpt_fam_compare_types
WHERE event_type = 'FCST'
UNION
-- This select returns the pairing of all bookings types with forecast types
SELECT bkng.event_type, fcst.compare_type, bkng.compare_type_description || ' to ' || fcst.compare_type_description AS compare_name
FROM rpt_fam_compare_types fcst,
rpt_fam_compare_types bkng
WHERE fcst.event_type = 'FCST'
AND bkng.event_type = 'BKNG'
AND fcst.compare_type = bkng.compare_type
WHERE event_type || ' ' || compare_type <> 'FCST AUTH_FTRS'
AND compare_type NOT IN ('NET_SHIP', 'SHIP_NET_FTRS', 'NET_ETS', 'GROSS_FTRS')
) cmpr
-- The two (2) in-line views are joined by EVENT_TYPE (i.e. 'FCST' and 'BKNG')
-- to form a product of all RPT_FAM_FWEQ_DETAIL rows with comparison types
WHERE dtl.trg_event_type = cmpr.event_type
ORDER BY plan_ctry,
division,
season,
monthly_seq,
tier_num,
level_num,
tier_volume,
trg_event_num,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value
COMMIT
INSERT INTO rpt_fam_FWEQ_detail_aggr
SELECT plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
disp_event_num,
max_event_num,
compare_name,
first_display_event_num,
level_type,
level_value,
'TOTAL' AS row_type,
material,
key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sty_colr_sdesc,
sty_grp_nbr,
sty_grp_desc,
matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
curr_prod_i2_life_cyc_cd,
NULL AS promo_ind, -- for future use
-- Each RPT_FAM_FWEQ_DETAIL row's eight (8) quantity columns are broken down
-- into F1_QTY from DISP_aaaa_QTY, F2_QTY from TRG_aaaa_QTY and
-- AE from aaaa_AE where 'aaaa' is equal to one of the COMPARE_TYPEs below:
-- F1_QTY
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
disp_dlvry_plan_qty
WHEN compare_type = 'NET' THEN
disp_net_qty
WHEN compare_type = 'NET_AO' THEN
disp_ao_qty
WHEN compare_type = 'NET_FTRS' THEN
disp_futr_qty
WHEN compare_type = 'NET_REPLENS' THEN
disp_replen_qty
WHEN compare_type = 'AUTH_FTRS' THEN
disp_auth_futr_qty
END as f1_qty,
-- F2_QTY
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
trg_dlvry_plan_qty
WHEN compare_type = 'NET' THEN
trg_net_qty
WHEN compare_type = 'NET_AO' THEN
trg_ao_qty
WHEN compare_type = 'NET_FTRS' THEN
trg_futr_qty
WHEN compare_type = 'NET_REPLENS' THEN
trg_replen_qty
WHEN compare_type = 'AUTH_FTRS' THEN
trg_auth_futures_qty
END as f2_qty,
-- AE
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
abs(disp_dlvry_plan_qty - trg_dlvry_plan_qty)
WHEN compare_type = 'NET' THEN
abs(disp_net_qty - trg_net_qty)
WHEN compare_type = 'NET_AO' THEN
abs(disp_ao_qty - trg_ao_qty)
WHEN compare_type = 'NET_FTRS' THEN
abs(disp_futr_qty - trg_futr_qty)
WHEN compare_type = 'NET_REPLENS' THEN
abs(disp_replen_qty - trg_replen_qty)
WHEN compare_type = 'AUTH_FTRS' THEN
abs(disp_auth_futr_qty - trg_auth_futures_qty)
END as ae,
SYSDATE AS zz_insert_tmst
FROM
-- This in-line view returns only LEVEL_NUM = 2 or LEVEL_TYPE = 'STYLE_GROUP' data
(SELECT plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
trg_event_type,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value,
-- The following NULL'd columns' values cannot be saved due to aggregation
NULL AS material,
NULL AS key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
NULL AS sty_colr_sdesc,
sty_grp_nbr,
sty_grp_desc,
NULL AS matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
NULL AS curr_prod_i2_life_cyc_cd,
sum(disp_net_qty) AS disp_net_qty,
sum(trg_net_qty) AS trg_net_qty,
-- ABS(sum(trg_net_qty) - sum(disp_net_qty)) AS net_AE,
sum(disp_dlvry_plan_qty) AS disp_dlvry_plan_qty,
sum(trg_dlvry_plan_qty) AS trg_dlvry_plan_qty,
-- ABS(sum(trg_dlvry_plan_qty) - sum(disp_dlvry_plan_qty)) AS dlvry_plan_AE,
sum(disp_futr_qty) AS disp_futr_qty,
sum(trg_futr_qty) AS trg_futr_qty,
-- ABS(sum(trg_futr_qty) - sum(disp_futr_qty)) AS futr_AE,
sum(disp_ao_qty) AS disp_ao_qty,
sum(trg_ao_qty) AS trg_ao_qty,
-- ABS(sum(trg_ao_qty) - sum(disp_ao_qty)) AS ao_AE,
sum(disp_replen_qty) AS disp_replen_qty,
sum(trg_replen_qty) AS trg_replen_qty,
-- ABS(sum(trg_replen_qty) - sum(disp_replen_qty)) AS replen_AE,
sum(disp_futr_qty) AS disp_auth_futr_qty,
sum(trg_auth_futures_qty) AS trg_auth_futures_qty --,
-- ABS(sum(trg_auth_futures_qty) - sum(disp_futr_qty)) AS auth_futures_AE
FROM rpt_fam_FWEQ_detail
WHERE plan_ctry &where_plan_ctry
and level_num = 2 -- 'STYLE-GRP' or 'STYLE'
-- AND (promo_ind <> 'Y' OR promo_ind IS null)
GROUP BY plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
trg_event_type,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sty_grp_nbr,
sty_grp_desc,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc -- 'Type Group' in Brio
) dtl,
-- The following in-line view returns all of the different combinations
-- of comparison types in the RPT_FAM_FWEQ_DETAIL table
-- This select returns the pairing of all forecast types
SELECT event_type, compare_type, compare_name
from
(SELECT event_type, compare_type, compare_type_description || ' to ' || compare_type_description AS compare_name
FROM rpt_fam_compare_types
WHERE event_type = 'FCST'
UNION
-- This select returns the pairing of all bookings types with forecast types
SELECT bkng.event_type, fcst.compare_type, bkng.compare_type_description || ' to ' || fcst.compare_type_description AS compare_name
FROM rpt_fam_compare_types fcst,
rpt_fam_compare_types bkng
WHERE fcst.event_type = 'FCST'
AND bkng.event_type = 'BKNG'
AND fcst.compare_type = bkng.compare_type
WHERE event_type || ' ' || compare_type <> 'FCST AUTH_FTRS'
AND compare_type NOT IN ('NET_SHIP', 'SHIP_NET_FTRS', 'NET_ETS', 'GROSS_FTRS')
) cmpr
-- The two (2) in-line views are joined by EVENT_TYPE (i.e. 'FCST' and 'BKNG')
-- to form a product of all RPT_FAM_FWEQ_DETAIL rows with comparison types
WHERE dtl.trg_event_type = cmpr.event_type
ORDER BY plan_ctry,
division,
season,
monthly_seq,
tier_num,
level_num,
tier_volume,
trg_event_num,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value
COMMIT
INSERT INTO rpt_fam_FWEQ_detail_aggr
SELECT plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
disp_event_num,
max_event_num,
compare_name,
first_display_event_num,
level_type,
level_value,
'TOTAL' AS row_type,
material,
key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sty_colr_sdesc,
sty_grp_nbr,
sty_grp_desc,
matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
curr_prod_i2_life_cyc_cd,
NULL AS promo_ind, -- for future use
-- Each RPT_FAM_FWEQ_DETAIL row's eight (8) quantity columns are broken down
-- into F1_QTY from DISP_aaaa_QTY, F2_QTY from TRG_aaaa_QTY and
-- AE from aaaa_AE where 'aaaa' is equal to one of the COMPARE_TYPEs below:
-- F1_QTY
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
disp_dlvry_plan_qty
WHEN compare_type = 'NET' THEN
disp_net_qty
WHEN compare_type = 'NET_AO' THEN
disp_ao_qty
WHEN compare_type = 'NET_FTRS' THEN
disp_futr_qty
WHEN compare_type = 'NET_REPLENS' THEN
disp_replen_qty
WHEN compare_type = 'AUTH_FTRS' THEN
disp_auth_futr_qty
END as f1_qty,
-- F2_QTY
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
trg_dlvry_plan_qty
WHEN compare_type = 'NET' THEN
trg_net_qty
WHEN compare_type = 'NET_AO' THEN
trg_ao_qty
WHEN compare_type = 'NET_FTRS' THEN
trg_futr_qty
WHEN compare_type = 'NET_REPLENS' THEN
trg_replen_qty
WHEN compare_type = 'AUTH_FTRS' THEN
trg_auth_futures_qty
END as f2_qty,
-- AE
CASE WHEN compare_type = 'DELIVERY_PLAN' THEN
abs(disp_dlvry_plan_qty - trg_dlvry_plan_qty)
WHEN compare_type = 'NET' THEN
abs(disp_net_qty - trg_net_qty)
WHEN compare_type = 'NET_AO' THEN
abs(disp_ao_qty - trg_ao_qty)
WHEN compare_type = 'NET_FTRS' THEN
abs(disp_futr_qty - trg_futr_qty)
WHEN compare_type = 'NET_REPLENS' THEN
abs(disp_replen_qty - trg_replen_qty)
WHEN compare_type = 'AUTH_FTRS' THEN
abs(disp_auth_futr_qty - trg_auth_futures_qty)
END as ae,
SYSDATE AS zz_insert_tmst
FROM
-- This in-line view returns only LEVEL_NUM = 3 or LEVEL_TYPE = 'MATL' data
(SELECT plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
trg_event_type,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value,
material,
key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sty_colr_sdesc,
sty_grp_nbr,
sty_grp_desc,
matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
curr_prod_i2_life_cyc_cd,
sum(disp_net_qty) AS disp_net_qty,
sum(trg_net_qty) AS trg_net_qty,
-- ABS(sum(trg_net_qty) - sum(disp_net_qty)) AS net_AE,
sum(disp_dlvry_plan_qty) AS disp_dlvry_plan_qty,
sum(trg_dlvry_plan_qty) AS trg_dlvry_plan_qty,
-- ABS(sum(trg_dlvry_plan_qty) - sum(disp_dlvry_plan_qty)) AS dlvry_plan_AE,
sum(disp_futr_qty) AS disp_futr_qty,
sum(trg_futr_qty) AS trg_futr_qty,
-- ABS(sum(trg_futr_qty) - sum(disp_futr_qty)) AS futr_AE,
sum(disp_ao_qty) AS disp_ao_qty,
sum(trg_ao_qty) AS trg_ao_qty,
-- ABS(sum(trg_ao_qty) - sum(disp_ao_qty)) AS ao_AE,
sum(disp_replen_qty) AS disp_replen_qty,
sum(trg_replen_qty) AS trg_replen_qty,
-- ABS(sum(trg_replen_qty) - sum(disp_replen_qty)) AS replen_AE,
sum(disp_futr_qty) AS disp_auth_futr_qty,
sum(trg_auth_futures_qty) AS trg_auth_futures_qty --,
-- ABS(sum(trg_auth_futures_qty) - sum(disp_futr_qty)) AS auth_futures_AE
FROM rpt_fam_FWEQ_detail
WHERE plan_ctry &where_plan_ctry
and level_num = 3 -- 'MATERIAL'
-- AND promo_ind <> 'Y'
GROUP BY plan_ctry,
division,
season,
monthly_seq,
bucket_month_date,
tier_num,
level_num,
tier_volume,
trg_event_num,
trg_event_type,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value,
material,
key_material,
sap_cat_cd,
sap_cat_desc,
sap_sub_cat_cd,
sap_sub_cat_desc,
sty_colr_sdesc,
sty_grp_nbr,
sty_grp_desc,
matl_typ,
sap_prod_typ_grp, -- 'Type Group' in Brio
typ_grp_desc, -- 'Type Group' in Brio
curr_prod_i2_life_cyc_cd
) dtl,
-- The following in-line view returns all of the different combinations
-- of comparison types in the RPT_FAM_FWEQ_DETAIL table
-- This select returns the pairing of all forecast types
SELECT event_type, compare_type, compare_name
from
(SELECT event_type, compare_type, compare_type_description || ' to ' || compare_type_description AS compare_name
FROM rpt_fam_compare_types
WHERE event_type = 'FCST'
UNION
-- This select returns the pairing of all bookings types with forecast types
SELECT bkng.event_type, fcst.compare_type, bkng.compare_type_description || ' to ' || fcst.compare_type_description AS compare_name
FROM rpt_fam_compare_types fcst,
rpt_fam_compare_types bkng
WHERE fcst.event_type = 'FCST'
AND bkng.event_type = 'BKNG'
AND fcst.compare_type = bkng.compare_type
WHERE event_type || ' ' || compare_type <> 'FCST AUTH_FTRS'
AND compare_type NOT IN ('NET_SHIP', 'SHIP_NET_FTRS', 'NET_ETS', 'GROSS_FTRS')
) cmpr
-- The two (2) in-line views are joined by EVENT_TYPE (i.e. 'FCST' and 'BKNG')
-- to form a product of all RPT_FAM_FWEQ_DETAIL rows with comparison types
WHERE dtl.trg_event_type = cmpr.event_type
ORDER BY plan_ctry,
division,
season,
monthly_seq,
tier_num,
level_num,
tier_volume,
trg_event_num,
disp_event_num,
max_event_num,
first_display_event_num,
level_type,
level_value
COMMIT
/I agree.
SELECT ticket_no,name_of_the_passenger..
FROM ticket_master
WHERE ticket_no NOT IN
(SELECT Ticket_no
FROM ticket_cancellations
WHERE trip_id = my_trip_id);
This involves creating a little temp table for each record in ticket_no. Then full scanning it.
Change it to
SELECT ticket_no,name_of_the_passenger..
FROM ticket_master B
WHERE ticket_no NOT EXISTS
(SELECT null
FROM ticket_cancellations A
WHERE A.ticket_no = B.ticket_no
AND trip_id = my_trip_id);
Then you get an index hit in both cases. -
Schedule a background job for a program using ABAP code.
Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
*** matnr(20) type c,
*** mbrsh(30) type c,
*** mtart(30) type c,
*** kzsel(20) type c,
*** maktx(40) type c,
*** meins(5) type c,
*** end of itab.
data: begin of record occurs 0,
* data element: MATNR
matnr_001(018),
* data element: MBRSH
mbrsh_002(001),
* data element: MTART
mtart_003(004),
* data element: XFELD
kzsel_01_004(001),
* data element: MAKTX
maktx_005(040),
* data element: MEINS
meins_006(003),
* data element: MTPOS_MARA
mtpos_mara_007(004),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\jitu\bdc\10002.txt'
filetype = 'ASC'
has_field_separator = 'x'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
data_tab = record
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-matnr_001.
perform bdc_field using 'RMMG1-MBRSH'
record-mbrsh_002.
perform bdc_field using 'RMMG1-MTART'
record-mtart_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-kzsel_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
record-maktx_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-meins_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************& -
for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?
Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.
Maybe you are looking for
-
Hi there everyone. I've been given a task to decide on how to extract from R/3 some SD data. In R/3 there is a Z Report that gives some values. Well, my client wants me to replicate these same values/key figures in BW. They don't know how exactly the
-
Instance of Purchase order not Created
Hi Floks, We are trying to change the Quantity of PO item using user exit J_1I7_MIGO_SAVE during the MIGO. We are calling BAPI_PO_CHANGE,but it is returning an error message " Instance 4400000245 of object PurchaseOrder could not be changed ". Can an
-
How to insert ?xml version="1.0" encoding="utf-8"? before an element
Hi, I have a message which must contain XML inside XML, this internal one must start off with the <?xml version="1.0" encoding="utf-8"?> string. Is there a nice trick for inserting this before an element? (not at the beginning of the mapping, a speci
-
Updating a DB table with only non-empty values of a work area
Hi everybody, Is that possible in ABAP to update a table in the database with a work area, but only with non-empty values of this work area? Example: data: ls_custom type ZCUSTOMERS_0. ls_custom-CUSTOMER = '20'. ls_custom-LASTNAME = 'MyName'. ls_cust
-
Re: Not getting advertised internet speed
We have not ever gotten what we paid for. we are suppose to get 105 download speed. We are lucky if we get over 10 download (tested on different days and all different times of day) The problem started as soon as we upgraded to the faster speed abo