Plugged in HDMI to TV, have sound problem!

I just plugged in a HDMI cable from my PC to my TV, I did the thing in which i can slide the bars across each screen but I can only play sounds either from my TV or from my PC, what can i do so that I can hear both simultaneously?

Right Click on Speaker icon present in the Taskbar and select Playback devices.Set HDMI as default.Click OK,Apply.
If you still face the problem then update your graphic card driver.Visit the website of the graphic card manufacturer to download and install the latest driver.
S.Sengupta, Windows Entertainment and Connected Home MVP

Similar Messages

I have sounds problems with iOS 7

I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

I HAVE SOUND PROBLEM

I HAVE SOUND PROBLEM IN MY COPUTER

Hi,
What is your machine and its OS ? Please try the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have sound problems whyle telefoning with other peoples what can i do?

i bought a new Iphone 5S last week,and i have sound problems whyle telefoning with other peoples what can i do?

Define "sound problems."

I have sound problem in My Cq40-144TU Laptop

Hi,
I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing.
But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
Please help me sir

What sound problem - no sound on anything, no sound on some apps ?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
And for future info typing in all capitals is considered to be SHOUTING

Upgraded Mac Mini to 10.6.4 now have sound problems

Just upgraded my mac mini to 10.6.4 and now have sound distortion. Itunes is extremely tinny sounding, fades in and out, distorted and muffled sounding continually. Sound worked fine since I purchased it back in november but now since the update it is distorted. I also notice that if I listen using iphone headphones the sound is just as distorted.
Any ideas how to resolve this? I tried reloading itunes, checked sound/speaker preferences, rebooted the system a couple times, unhooked speakers and reconnected them. I am totally frustrated with this.
thanks for any help on this issue.

have you repaired permission before and after the upgrade ?
also, did you use *software update* from the  menu to install the upgrade ?
if so, download the combo updater from here http://support.apple.com/kb/DL1048 and apply it.
JGG

Flash CC is running painfully slow and quitting on me, also have sound problems

My Flash Creative cloud application is running very slowly. I am not sure whether it is to do with my file size, the file size is 310MB and i have been told this isnt that big.
I have recently brought more ram so my computer runs faster, this has helped my computer generally but not with flash.
I am also getting a buzzing sound when I press play for my sound. It doesnt stop even if i press stop or pause in the timeline. I have to quit flash entirely for it to stop. I have tested to see if it is that individual sound file but i am getting the same problem with all sound files.
HELP IS NEEDED QUICKLY PLEASE!!!

It's a known issue that Adobe says will be fixed soon. It's really a problem though. We are now back to CS6 for our current project, and it's got it's own issues with streaming sounds.
They have made some pretty amazing progress with Flash and Air in the last couple of years. Unfortunately, it feels like new and old problems come and go with each update. Hard to complain too much though, we'd be sunk without these tools.
Hopefully the next update will be relased soon.
More discussion here: http://forums.adobe.com/thread/1323550?tstart=0

I can't have sound via iTunesStore plus HDMI why ?

Hi,
I'm new here and i'm french so excuse me for my explanations...
I downloaded iTunes yesterday and i rent a movie yesterday too on iTunesStore. I wished to view my movie without waiting for downloading but when i connect my PC to my TV via HDMI wire i only have image but no sound... i don't understand because when i watch a movie on the internet and when i plug my HDMI wire there's no problem so do you have an idea why ???
Thank you
ajt005

Olivierroubieu
Thanks for the opportunity to try to help you resolve your Premiere Elements issue. But first we must establish that you are using Premiere Elements 12. The reason for asking for that confirmation targets the "PE12 CC" that you indicate as your program. There is no Premiere Elements 12 CC" The CC designation, as far as I have ever seen, goes to the Creative Suite products.
Assuming you are using Premiere Elements 12 on Windows 7, 8, or 8.1 64 bit computer....
1. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12? Have you updated to 12.1 via the program's Help Menu/Update? Also, check under Publish+Share/Computer/QuickTime to verify that you have QuickTime presets.
Let me cut to what I believe the problem to be...I am guessing that you have music files with iTunes origin. Whatever the case
a. Open iTune and go to the Edit Menu/Preferences/General and click on the Import Settings tab there.
b. In the Import Settings dialog that appears, next to "Import Using" set for WAV Encoder. OK out of there.
c. Import your file into iTunes, using File Menu/Add File to Library.
d. In iTune Music, right click the imported file and select "Create WAV Version".
e. Copy the .wav version produced and then paste it to the desktop computer.
f. From the desktop computer, import this .wav file into Premiere Elements 12 Expert workspace, using Add Media/Files and Folders.
Please let us know the outcome. If this an iTunes music issue, please be advised that this situation happens in Premiere Elements (any version). If I have not targeted your question, please supply more details.
Thanks.
ATR

Sound Problems on iPad: how to fix, easy [video]

Hi dear iPad user,
Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
So I made a video (short: 1m40s):
https://www.youtube.com/watch?v=FjBP-Ncj_fE
It shows:
how to unmute the sound (even if the side-switch locks the rotation of the screen)
how to put volume up
how to close all the apps (in the case there is an App messing with the sound system)
how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
What it won't fix: if you have a hardware problem...
If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
Hope this helps!
Everson.

UPDATE: fixing iPad Sound after iOS 7
http://youtu.be/SDf1LDcE95Q
(1min 36sec)
It covers the basics:
checking side-switch / mute / "Control Center"
volume all up
...and also the worst cases:
closing all apps (for rare cases when a single app might render the sound system instable)
rebooting the iPad
So, don't get desparete: try the things in the video.
There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

Sound problems on the Zen Micro HELP!!

I bought a Zen Micro about a Month ago. It worked perfectly fine I enjoy it. But then maybe 3 weeks after I have sound problems. It's not my headphones i know that for a fact because I tried two sets of them. I think it's the Headphone port. Because everytime i move my headphone plug when it's inside the port the sound get's dull. I can still hear the music but the sound of the music gets ugly. I hope someone can help me with this PROBLEM

Nbarretto,
The number of players that are having problems when compared to the total number of players out there is very small. Consider that Creative sold 2 million players in the last 3 months. Taking into account that the Zen micro was a very large portion of these sales, you can see that the number of complaints represents a very small percentage of the players out there. Looking at a support forum can make even the most rock solid device look bad if you take only that into account.
The good news for you is that there are lots of options available that can help you get a working player. I would suggest contacting support and seeing what they can do for you.
http://us.creative.com/support/custsup
Jeremy

Battlefield 2142 sound problem

Hi guys!
I have sound problems with Battlefield 242 since I bought a new motherboard.
Old mobo: Gigabyte GA-M57SLI-S4
New one: MSI DKA790GX
CPU: AMD Phenom X4 9650
RAM: 4* GB DDR2 800 Kingmax
Sound: X-FI Xtremegamer PCI
VGA: Sapphire ATI 4850 GB DDR3
OS: Windows 7 64bit Ultimate
Now I getting static/pop sounds during orbital strikes, only in multiplayer mode, in singleplayer mode everything ok!
I tried several tips like:
[*]Move the sound card to another PCI expansion slot and reinstall the sound card's drivers<[*]Replace nati've disk controller drivers with generic Windows ones<[*]Update the motherboard's BIOS to the latest version (including "beta" versions)<[*]Set the PCI Latency to 96 or greater<[*]Use the X-Fi card only in "Audio Creation Mode" with "Bit-matched playback" option on<[*]Overclock the PCI bus to 40?MHz instead of 33?MHz<[*]Deactivate X-Fi "Crystalizer"<[*]Deactivate unused devices in the motherboard's BIOS to free IRQ resources (RS-232 and Centronix ports, second Ethernet port, Parallel ATA controller, integrated audio)<[*]Deactivate Plug and Play in the motherboard's BIOS.<?
Any more idea?
?[/list]

"Re: Battlefield 242 sound problem! i've had this issue on my PC since the game came out with my X-Fi xtremegamer, even before win7. i think they said it happens with certain motherboards and there is no fix for it.
what i just do is set it on hardware mode, with high quality. if i use X-Fi mode, then my sound goes crazy during orbital strikes. i wish there was a way to use ultra high audio quality with hardware mode for people like us though.
interestingly, there was a similar problem in BF2. all the static, crackling, popping noise one day disappeared. it was earlier this year, i am not sure what fixed it, but if it was Creative that fixed BF2's X-Fi mode, I really think they ought to do the same for 242. i am guessing it was Creative because it was during a time when there were no patches for the game. it might have even been the latest OpenAL update i applied to BF2, but it was still from Creative. i did apply the same OpenAL update to 242 but it did not fix the static, crackling, pop problem during orbital strikes.

MSI P6N SLI sound problem under windows 7

Hi all!
I have an MSI P6N SLI mainboard and I have installed win7 ultimate x64 to get a look on that OS. Everything works fine expect one thing: I have no sound. I tried to install manually the realtek sound driver but no changes. When I check the Volume Control Options then neither the Speakers nor the Realtek Digital Output checked (but the speaker is plugged in).
However I have sound under Linux.
Could someone help me? (and sorry if I have missed the topic which resolves this problem if there is any)

Hi everyone,
hope it's ok to refresh this thread - I did not want to open up a new one, because this one matches my problem perfectly - but my speakers are plugged-in the right way
I'm running Win7 64 on the MSI P6N SLI (not v2 no Platinum) and am unable to install the sounddriver (well not correct - I did install the driver). The upgrade advisor said all green (under Win XP 32) and the MSI-Driver-Page propagates Win7 32/64 is supported for the SoundCard of my Board.
The driver installs just fine, but the device won't come out of "I have a problem"-state - always telling me "The drivers for this device are not installed. (Code 28)" (I event tried installing the driver manually with pointing the win-hardware-setup-routine to the driver-directory) - still no use - I removed and rebootet serveral times...
Hope anybody has a solution for this problem (I'm taking the posts above as a "this has to work"-basis so i'm not ready to give up and go out there and buy a new soundcard )
Thanks in advance for any hint.

HELP ME!!!Sound Problems!!!

Hello!!
I have sound problems with my Motherboards sound card..I have a KT3 Ultra2 motherboard.. I tried to install the alc650 sound drivers, and now i only get sound from the left speaker..WHY?? i have tried ewerything, to install the drivers again. tried to install windows XP again...can someone help me please..
Thanks!

This may be a stupid question but are you sure the speakers work? Have you tried a different set of speakers? Check the connections? I hate to ask but I have to.

Sound problems with iPhone 6 plus

I have sound problem with my iPhone 6 plus.
Some apps have sound, others no.
For exemple the app minipiano has no sound (it works fine on my ipad mini)
Does anyone has the same problem ?

Hello there, .applefan.
When having performance issues with an application installed on your iOS device, the following Knowledge Base article offers up some practical steps for troubleshooting your issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sound problem in my laptop

I am using Envy dv 7 , After buying it , its sound working great . But now I have sound problem, I pick sound up to maximum but I don't hear anything. After restarting of my laptop, sound works. What I have to do for it?
This question was solved.
View Solution.

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
When windows has reloaded, use recovery manager to reinstall your original IDT HD Audio driver as detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Plugged in HDMI to TV, have sound problem!

Similar Messages

Maybe you are looking for