Plugin Delay compensation not working correctly?

Hey guys,
I've noticed lately that the plugin delay compensation doesn't seem to be working like it should. I'm not sure if I'm going mad or not...
When I'm using Drumagog (drum replacement plugin), Logic is very good at dealing with the latency, even when increase the accuracy (therefore usually adding more latency). However, it doesn't seem to be doing that properly and I'm not sure why.
All my settings appear to be correct in the audio section and have checked the box to correct the latency in plugins and software instruments. My Mac is pretty snappy and can handle a lot, so the audio buffer is generally set very low at this point without adding any clicks and pops etc.
Any ideas?

James,
I think you're onto something there.
I have noticed too that the Logic 9 misbehaves from time to time when it comes to delay compensation. From my experience it happens when you create an average to large mixing project with a number of plugins on channels (possibly with settings dependent latencies).
What I have found is:
1. In some cases it over-compensates - that is the channel in question suddenly played ahead of the time even though visually it was aligned with the others (but in some other cases under-compensates).
2. I have noticed that saving the channel strip settings, resetting the channel strip and reloading the same setting rectifies the delay over-compensation. To me it appears that the "delay compensation" system does not recheck/recalculate the plugins current delays after any change is made in channel/plug-in (or even adding plugins, or does it only partially) - I do suspect that it gets screwed up when the plugin changes its latency based on its settings but Logic fails to recalculate.
As a fallback it would be extremely useful if there was an option in "Audio" sub-menu (for instance) to force Logic to re-assess (recalculate) the plugin delays (across the board) according to plugins current settings but it would be better if it detected correctly any change and recalculated it so we could rely on its correctness/integrity.
3. With such larger projects the sound comes out noticeably later than the play-head's position is which makes it very hard to locate precisely positions in your track.
These problems did not seem evident in Logic 8, but have to admit I haven't run as large projects in Logic 8 as I'm doing now in Logic 9 (80-100 tracks with 2-6 plugins in some channels).
Apple, please, fix these latency compensation discrepancies/issues as it can really byte back when the customer gets back to you saying that this or that track seems to be out of sync (subtly but it is). It is unworkable to having to verify the raw recordings if the delays are in the recordings or introduced by Logic.
Hope this info helps.
Regards
Gabe

Similar Messages

Safari hierarchical menus not working correctly

Hello all,
I'm having a problem with Safari's hierarchical menus not working correctly. They pop out in odd positions, and--worst of all--the big ones (for folders that contain lots of bookmarks) pop out right on top of the main bookmarks menu, making it all but impossible to navigate that main menu. I've tried all the usual tricks: log out/restart the system, restart Safari, reset Safari, boot in safe boot mode, repair permissions, yank Safari's bookmarks prefs file, even reinstall Safari, and nothing worked. I've also noticed the same behavior in Camino. My system hierarchical menus work fine, though, so I'm thinking I have a corrupt prefs file somewhere. I'm using Safari 4.04 with no extra plugins beyond what come with it on 10.5.8. Does anyone know what's going on and how to fix this?

AFAIK, the submenu will pop on either side, depending on available space and if there are further subfolders, allowing them to continue in the same direction.
Since the new account doesn't exhibit the issue, there are two ways to attack the problem. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything not on that list into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

Cooling fan not work correctly

my computer says the cooling fan not work correctly plase visit www.hp.com.go/teachcenter/startup

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you
It looks like you are having difficulties with regards to the Cooling Fan of your Netbook
We will surely assist you with this
According to the message you have posted I suspect this is purely a hardware issue where in your getting "System Fan(90B) - The system has detected that a cooling fan is not operating correctly" message. This is a mechanical fault and the Cooling Fan on your Notebook and needs to be replaced before the Notebook starts up with an Overheating Issue.
Causes/Reason for this Issue:
1. Sometimes this is just because of Dust, Pet Animals Hair slowing down the fan
Perform the below shown troubleshooting steps:
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till Unit loads Windows and then Shut down the Netbook again
Step 09. You should clean all the Vents and Openings really good with a can of compressed air
Note: If you are still getting the same error we need to replace the fan
I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Netbook Fan replaced and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Latest QT & iTunes installed, but not work correctly

I had installed latest version QT7 & iTunes 6.05, however, both of them not work correctly. For QT, it can play video with "looping - delay & sound impediment" audio; the video seems ok. My iTunes has the same problem, I just wonder this is because of QT.
Hope some body can help me to solve this problem.

hmmmmm.
quit itunes and/or quicktime.
try opening your Sounds and Audio devices control panel. click on the Audio tab.
in the sound playback area there, click on the "advanced" button. click on the "performance" tab.
try moving the sliders towards full and best. click okay.
check on the sound quality in itunes and quicktime again.
any improvement?

I upgraded to 6.02 and still get this message from Gmail: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version."

When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?

Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

Plugin Delay Compensation, reverb busses & film scoring?

Hello,
When I score a film, the first thing I do is make sure the window burn time code in the film & Logic's time code are in sync for the cue I'm about to write in Logics sync settings. Once set, everything lines up perfectly when jumping around with the SPL. HOWEVER, as soon as I push play in the sequence, the movie will jump back a split second and then play, making the window burn and logics time code out of sync.
I discovered the reason this happens is plugin delay compensation for the reverbs I have on busses (I use UAD Dream Verbs on busses to save on CPU when composing to film). When I turn off plugin delay compensation, the movie plays back perfectly in sync (no jumping back), however now all the parts that are busses to the reverbs are playing back late!
So I'm in a conundrum. I cant turn off PDC because I use reverbs on busses, yet I cant keep it on because I cant sync to the film. I've heard from others to use movie playback from another system, but I personally don't see how this will help, because the movie will still be syncing to Logic's time code, which will tell it to start early on playback for plugin delay compensation, right?
I dont mind the jumping back for PDC, the main problem is syncing to time code/hit points. If my SPL when play is stopped is not using plugin delay compensation, there is no way to place a marker or hit point, because whatever I see when play is stopped will be wrong on playback when PDC kicks in! I would think the only solution is logic needs to constantly use Plugin Delay compensation, even when nothing is playing back!
Is this a problem with Logic 7 only or does it exist in 8 too? How do other sequencers use PDC? Its weird that I dont hear more people having problems with this, as right now its a guessing game scoring a film and hoping my hit points/TC will sync up!
Thanks in advance for your help! Its greatly appreciated!
Logic 7.2.3 OS 10.4 Dual 2.5 PPC G5

Jonathan Timpe wrote:
Perhaps I should just start using space designer? Does it suffer from the same PDC problems?
I personally haven't noticed any PDC issues with Space Designer, but if you do, you could always just use platinum verb to get a little wetness to the signal.
Perhaps I need to develop more "reverb imagination" skills and none of this would be a problem.
This may be a dangerous suggestion, but assuming you have a decent knowledge of the sound of a real orchestra, I would tend to compose with that in mind rather than exactly what your sample library sounds like. The goal, after you've done the bulk of the composing, is to try to get your library to sound as much like the real thing as you can. Remember, it wasn't all that long ago that film scores we composed with no MIDI at all, no immediate feedback on the sound of a motive, harmony etc. Obviously, if the end product is going to be in VIs instead of live instruments, you need to keep the sound of your library in mind. But ideally, you don't rely on hearing every little thing exactly as it will be on the track in order to compose. I know that's harder than it sounds, and I too am guilty of relying a bit too much on immediate feedback, but I think it's worth while. So rather than "reverb imagination," I'd suggest developing a better "instrument imagination," and let reverb be more of a finishing touch (albeit a very necessary one).
How do you deal with syncing back to the film? Sync pop & written time code sheet for when the pop occurs (without PDC of course)?
My methods for syncing back to film are much more basic than that. Firstly, I'd say most of the time I'm just sending audio tracks to the director with the SMPTE for the beginning of each track. If I am actually responsible for putting them together, I've just done it in iMovie, again, lining up each track with the SMPTE code for the film.
I should point out that I'm not exactly a pro at this (though I'm trying to get there), so someone else could probably offer better solutions.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Text formatting in Numbers is not working correctly.

In Numbers on Chrome text formatting is not working correctly, it's almost as if a CSS file is not being loaded. To be precise, when I try to make a cell Bold there is no bolding. I am using Arial as a font. This has been an issue on Mac and Windows. Any ideas?

Do you have the same problem with Safari or Firefox?

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

Plugin Delay compensation not working correctly?

Similar Messages

Maybe you are looking for