Plugin Dissolve dont work on 64bit

Hi.
i just build a Dissolve plugin from sample code (SDK), i have add " /Wp64" to command Line int property ->c/c++/ command Line (i have visual studio 2010) and
#ifdef __PIMac__
    #if (defined(__i386__))
        CodeMacIntel32 { "PluginMain" },
    #endif
    #if (defined(__ppc__))
        CodeMachOPowerPC { 0, 0, "PluginMain" },
    #endif
#else
    #if defined(_WIN64)
        CodeWin64X86 { "PluginMain" },
    #else
        CodeWin32X86 { "PluginMain" },
    #endif
#endif
to Pipl.
and i dont see a plugin in 64 version of photoshop. pleasse help.

The PSCS SDK you downloaded may not be right one. the .r file should be sth like the following.
It works on Mac PSCS5 64 bits as I compiled them with XCODE
#ifdef __PIMac__
#if (defined(__x86_64__))
                                        CodeMacIntel64 { "PluginMain" },
/* my plugin uses Objective-C, Cocoa, for UI and should not be
                                           unloaded, this flag is valid for 32 bit plug-ins only and
                                     should not be used in any windows section */
                                        Cocoa {},
#endif
#if (defined(__i386__))
                                        CodeMacIntel32 { "PluginMain" },
#endif
#else
#if defined(_WIN64)
                                        CodeWin64X86 { "PluginMain" },
#else
                                        CodeWin32X86 { "PluginMain" },
#endif
#endif

Similar Messages

Cross Dissolves dont work on Variable Speed clips?

Whenever I add a cross dissolve a the end of a clip with variable speed the dissolve doesn't work. Any reason?

A workaround:
1) Put your variable speed clip on V1
2) Overlap the incoming clip on V2 so there are the same number of frames of overlap as the desired length of the dissolve
3) Using the Pen Tool in the Timeline, add two Opacity keyframes to the clip on V2 and, placing the first KF on the first frame of the clip, ramp the Opacity up over the number of frames of the desired dissolve
4) If you need the clip that is on V2 to end up on V1 for further editing in the Timeline, create an Add Edit in the clip and Shift-drag the second portion of the clip down to V1 so it doesn't change its horizontal position in the Timeline

[Solved] 3 seperate NICs dont work in 64bit Live CD but work in 32bit

I'm attempting to install Arch onto a new machine however when I boot into the 64 bit Live CD environment, my NIC does not work. I've tried 3 seperate NICs:
- The on-board gigabit NIC (Realtek RTL8111/8168)
- A PCI TP-Link gigabit card (uses a Realtek RTL8169 chip)
- A PCI Intel gigabit card (Intel 82541PI)
Under 32 bit, all 3 work flawlessly. They pick up DHCP information and can ping local and external addresses. Under 64 bit however, none of them seem to be able to send or receive any network packets. They are all detected properly and have the correct modules loaded (the two realtek NICs have the r8169 module loaded, the intel uses the e1000 module). The line state for each of them changes to up when they are plugged in, but they do not pick up any DHCP information. If I manually set network information for the interfaces, they can only ping localhost and nothing else. No other hosts on the same network can ping the address I assign to them. All 3 NICs work flawlessly under Windows 7 64 bit.
Can someone please help me troubleshoot this?
Last edited by boak (2013-04-23 12:43:13)

Great you found a solution for it! Please edit the thread title sometime and add [Solved ] to it, so that others find working solutions easier when searching.
To your question I don't know really; it's an odd sympton. The IOMMU has to do with memory management, but not for virtualisation alone (http://en.wikipedia.org/wiki/IOMMU has some hints on why it might go wrong without). I would think it is some kind of bios bug, but not sure. There should be some dmesg error related to it when booting the 64-bit ISO though. Interesting would be, if your 64-bit install-disc boot detected your full ram (if more than 4GB) without that feature enabled,

NTFS is not working in 64bit-mode

NTFS is not working in 64bit-mode but in 32bit-mode all right !!! ***?!

dont work int volume with XP and ext volume just sample NTFS file server ! I do not understand ! (((

After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.

After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.
I get messages like:
ERROR 1
-Error Loading Media: File Could Not Be Found
http://i.imgur.com/5OaxOFC.jpg
ERROR 2
-Video can't be played because file is corrupt.
http://i.imgur.com/cqRpJOp.jpg
Before I start, I will like to point out some things Ive tried already so this doesnt end up being a back and forth of things already tried.
*Ive uninstalled adobe flash player
*Ive tried the whole
media.windows-media-foundation.enabled to false or to true
*Ive gone into safe mode and nothing
*Ive tried toggling off the plug-ins to see if anything I have problems with works. Nothing.
All the media that plays from different various players:
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed <-- 2 embedded videos that both play.
All the media that wont play:
http://www.jwplayer.com/ <---- that front page video : I get ERROR 1 for this
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA <--- I get ERROR 1 for this
And every vine and instagram video. Since I will be asked to post something from it here is something from vine and something from instagram
https://vine.co/v/OqxKQBJd3lm <---- I get a still image
http://instagram.com/p/up3CG6ooDP <----- I get error 2 if I go into page info and click the media tab and look for the video.
All my enabled plugins:
http://i.imgur.com/9fCZ1s2.jpg
Everything on my permissions even on the pages of the media I cant play is set to : Use Default.
Now, I thought this was just some kind plug-in problem, I even thought it was just something with the updated made Firefox incompatible with some of the webplayers. Of course I found out this was wrong. Keep on reading:
If your flash plugin crashes or if you terminate/end process in the Task manager, your video will be replaced by this grey message:
http://i.imgur.com/vudnNIM.jpg
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
Now, all these videos I listed before, If I had them all open in tabs and then proceeded to terminate my flash plugin in Task Manager, they would all be replaced by that grey message window that the plugin crashed.
Now, after I updated firefox to 35.0, if I did the same thing
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
These three would show that grey message and these are the ones I can play
But these 2 the ones I have a problem with.
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
they wont even be affected by it. Its like they arent even using the flash plugin.
Whenever I would terminate/end process my plugin from my task manager in 34.0 EVERYTHING, EVERYTHING would not work including every vine video and instgram video, it would either show that grey message that says the plugin crashed or it would not work. They would all work again when I refreshed the page. Everything, in 34.0 in my firefox was using the flash plugin.
Now, as I stated above I thought it was just some kind of webplayer and firefox 35.0 conflict that was causing these problems.
Until I saw this:
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://i.imgur.com/gCaUMXm.jpg
http://i.imgur.com/V9w7ulS.jpg
http://www.jwplayer.com/
http://i.imgur.com/dqZtoTX.jpg
They are both using the same exact webplayer. THE SAME ONE.
I can play the first one
but the video in the front page of http://www.jwplayer.com/ I cant play it.
Which brings me to my final conclusion.
The reason I cant play some that fron page video of http://www.jwplayer.com/
videos from videomega.tv
and instagrams and vines
IS because of their file extension, their file types.
I went to the firefox options and clicked the Applications tab:
http://i.imgur.com/uWWKelX.jpg
http://i.imgur.com/HYBjwdZ.jpg
http://i.imgur.com/IK4C2WR.jpg
Shouldnt all those video file types be in : Use Shockwave Flash (in Firfox) instead of : Always ask
When I try to toggle it to something else I dont even get the option to use Shockwave Flash
http://i.imgur.com/gTH18S1.jpg
In Conclusion, what gives??
-In 34.0 Everything worked.
-If I terminated/ended process the Flash plugin in 34.0 everything would be affected by it , either by not working anymore or showing me that grey crash message.
-This all started when I upgraded to 35.0
-Has nothing to do with webplayer conflicting with 35.0 as proven above.
-The reason for all of this not working is the type of video extension they have. Judging from the examples I gave of the things I cant play, it would seem I cant play mp4, flv and whatever vine uses. Which I think its mp4 as well.
Anyways, how do I fix all this so it works like it did before I upgraded to 35.0

I looked at that but it only shows for Windows 8.1 , 8.0 , 7 , i have Vista , 64 bit Ultimate , would the Windows 7 one work ?? , or am i out of luck ?
And what plug-in icon in the address bar ?? , i don't see anything that pertains to any plug-ins
This is a example of one of the videos i was trying to watch , basically when you click the arrow in the center , it just goes away for a second then comes back and the video never plays , it just sits there , in the lower left corner i see a small popup that says javascript;
http://instagram.com/p/zAA6W8DAR9/?modal=true

Flash plugin created not working in flash player 10.1 (release - not beta)

Hello, i wrote a plugin using flash (you can click on the preview button to see it):
http://activeden.net/item/shiny-plugin/94112
It worked perfectly on all the previous flash player versions and in the new flash player 10.1 you can see the effect.
Actionscript wise - it draws lines at various angles and then apply gradient glow on them.
If you re-install the previous version the plugin works again. any clue why is it happing? Thanks.
=====================
System: Windows 7-64Bit
Flash player: 10.1
CPU: Intel Core 2 Quad 2.4MHz,3GB RAM
GPU: Nvidia 8800 GTS
=====================

Thanks for the quick response! here is the file list (all file versions are 10.1.53.64):
C:\Windows\SysWOW64\Macromed\Flash:
Flash10h.ocx
FlashAuthor.cfg
FlashInstall.log
flashplayer.xpt
FlashUtil10h_ActiveX.dll
FlashUtil10h_ActiveX.exe
install.log
NPSWF32.dll
NPSWF32_FlashUtil.exe
uninstall_plugin.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerTrust:
Adobe Search For Help.cfg
AdobeFireworksCS5.cfg
AdobeXMPFileInfo.cfg
AdobeXMPFileInfoCS5.cfg
kuler.cfg
ServiceManager.cfg
I also made sure all the addson are enabled. Still doesn't work.
disabled hardware acceleration.Still doesn't work.
the last resort is will try to update the GPU driver - as ʇɐb ɹəuəllıʍ said.
I will keep you posted either way. thanks

Advantages to working in 64bit?

If I don't use large sample libraries, are there still advantages to working in 64bit?

Eriksimon wrote:
I have never tested if Logic32 needs more or less CPU than Logic64. Guess I'll pull out the old Evanbrass test and see if there's a signiificant and consistent difference.
...and there isn't. Same track count. That said, I agree with CCT, the future looks 64bit - in fact, the present already looks that way. The list of 64 bit plugins keeps steadily growing.
http://www.logicprohelp.com/forum/viewtopic.php?f=10&t=52244&start=240#p416317

The bluetooth driver is not good and dont work correctly.

the bluetooth driver is not good and dont work correctly.
my notebook is dv6 6160se and with win7 64bit.
and it cant be solved by windous update and driver search.
how can i use of all ability of my bluetooth?

the bluetooth driver is not good and dont work correctly.
my notebook is dv6 6160se and with win7 64bit.
and it cant be solved by windous update and driver search.
how can i use of all ability of my bluetooth?

Some programs and video files dont work.

Some programs and video files dont work, get a crash report everytime I close, even after an uninstall everything and re install.
So I try playing some videos and it gives me an error, which I can watch on Chrome. Soundcloud doesnt seem to work, again works on chrome, and before I could watch WebM's but now it says not supported MME. Also everytime I close I get a crash reporter. I tried uninstalling and reinstalling but nothing seems to work. I just happened recently. Also cant play soundcloud. Tried everything, feeling like going to chrome where things work and support is actual support

Protected mode works on some systems and not others. Since two of your four crash reports were related to Flash, I thought it was worth a try, but it's up to you whether you want to try it.
I'm not sure whether the issue with WebM video is a setting issue or a program files issue or a system issue.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Don't delete anything here. Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, choose a name like TESTING, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Any better results with WebM video or shutdown?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.
'''Clean Reinstall'''
A regular reinstall may leave some stray files in your programs folder. This method is a bit cleaner.
(1) If needed, download a fresh installer for Firefox 30 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox.
(3) Rename the folder
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
Does Firefox behave more normally?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* C:\Program Files (x86)\OldFirefox\Plugins
* C:\Program Files (x86)\OldFirefox\browser\plugins

Google talk video plugin does not work any more with Firefox 4. When clicking on the video chat icon, I am repeatedly asked to install the plugin, and it never works.

Google talk audio/video plugin used to work fine on Firefox 3, but does not work anymore on Firefox 4. Every time I click on the video chat icon on google talk, I am asked to install the plugin, even if I have already installed it before. The plugin works properly on the latest version of IE on the same PC.
Thanks for your help. I do not want to switch to Chrome or Opera, but if this bug is not fixed, I will have to.

Not sure if installing IE 9 did it or not but I now see the camera in IE, FF and Chrome. Could be Facebook fixed the problem also.
Thanks for the reply.
George

Iphone dont work

my iphone dont work what to do ?
i bought my iphone 5s before 8 months.
i went to idigital store that said me i havent 1 warrenty there .
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you

snans wrote:
my iphone dont work what to do ? - what doesn't work - maybe add some details
i bought my iphone 5s before 8 months. - where did you buy this phone
i went to idigital store that said me i havent 1 warrenty there . not international warranty only in the country the phone was purchased.
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you

Speakers dont work

My speakers dont work , headphone jacks do

Try reset SMC
see
http://support.apple.com/kb/ht3964
and Pram
http://support.apple.com/kb/ht1379

Facetime dont work

my facetime dont work whith lion

Hello, friends.
In order to run FaceTime on Lion, solving the server registration issue, you must create a new password key in Keychain, with the following parameters:
Name: com.apple.facetime: registrationV1
Account: registrationV1
Where: com.apple.facetime
Then, restart your Mac.
Best regards!

Dont work dimms 2- on K8N Diamond

Hi, i have problem with DIMM 2-4, if i put any memrory ram in the DIMMs 2 or 4, the BIOS give this error (using the led):
Quote
Testing onboard memory size. The D-LED will hang if the memory module is damaged or not insalled properly
But if i put ram in the DIMMs 1-3, work without any problem, also work if i put memory in the dimms 1-2-3-4, but only recognize the ram who is in the dimms 1-3.
I try to reset de bios and upgrade it to the last version, but dont work. Please anyone help me
pd:sry for my english :(

Quote from: finord on 13-February-07, 02:14:15
I try to install 2x256mb(at the moment i have 2x512 kingston value ram, in the dimm 1 and 3), i use a signle mode, but the problem is the dimms 2-4, if i put only 1 memory ran (kinsgton value ram) in the dimm 2 o 4, dont work
that is normal, when using 2 memory sticks always put them into 1st DIMM slots(close to CPU socket.) about 4 sticks usage and 2 of them are not detected, can be due your mixing memory (ranks & banks, and CPU mem.controller cannot handle it) what CPU core you got btw? im still not conviced its DIMM slots failure. also before installing all 4 memory sticks setup from BIOS command rate to 2T, and apply memory index 166. also you have insterting all 4 stick in wrong direction. put in DIMM1 & DIMM2 Kingston sticks(instead DIMM1 & DIMM3) and 2 other once 2x256 into DIMM3 & DIMM4 (instead DIMM2 & DIMM4)
re-test.

Dont work dropdown list in Variation Label Menu on one variation site

Hi, guys! I have trouble with Variation Label Menu. I have site with four variation language and i made Variation Label Menu using code on my master page
<div style="float:left; margin:6px; z-index:9999">
<PublishingWebControls:VariationsLabelEcbMenu id="variationLabelMenu" DataSourceID="LabelMenuDataSource" DisplayText="" IsCallbackMode="true" runat="server" />
<PublishingWebControls:VariationDataSource id="LabelMenuDataSource" LabelMenuConfiguration="1" Filter="" runat="server"/>
</div>
On three variation site Variation Label Menu work fine on UA, FR, EN
But on one site RU (this site is source for another) Variation Label Menu dont work :((
I will glad to any ideas for fix my problem.
Aleksandr Shramko

But that should have changed the logic of the navigation:
The VariationDataSource control supports three different operation modes using the LabelMenuConfiguration attribute:
Link to Peers: this is the default and most common operation mode. In this mode, the data source returns links to peer pages of the current page.
LabelMenuConfiguration="1"
Link to Parent: using this operation mode the data source returns links to the peers of the parent site. That link will not point to the peer page but to the peer site of the current site.
LabelMenuConfiguration="2"
Link to Top Site: using this operation mode the data source returns links to the top sites of peer labels.
LabelMenuConfiguration="3"
http://blogs.technet.com/b/stefan_gossner/archive/2011/11/29/sharepoint-variations-the-complete-guide-part-12-customization.aspx

Plugin Dissolve dont work on 64bit

Similar Messages

Maybe you are looking for