Plz tell me about in bdc source table to target table covertion

hi, this is kalyan
how can we transfer the data from source to target

hai,
kalyan
The process to send the data from source(legacy) to sap system using bdc involving two steps.
1. Retrieving the data from legacy(presentation server)
    to internal table.
2. Send the data from Internal table to SAPsystem using
    BDC.
To execute the first step.
    if u are uploading data from text file to internal table ,
u should use
GUI_UPLOAD FUNCTION MODULE .
    if u are uploading data from EXCEL file to internal table ,
u should use
ASLM_EXCEL_TO_INTERNAL_TABLE FUNCTION MODULE .
To execute step 2,
u should use create a internal table like
t_bdcdata TYPE STANDARD   TABLE OF bdcdata.
      Then append field values to bdcdata through workarea
      bdcdata with or without recording.
If it is useful, reward points.
Thank you,
G.V.K.Prasad

Similar Messages

TS3694 plz tell me about restoring error 1015

plz tell me about restoring error 1015

iTunes: Specific update-and-restore error messages and advanced troubleshooting
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You will need to look else where for help if you are attempting to, or have jailbroken your device.

Sql server table as Target table

Hi folks,
I want to use sql server database table as target table in oracle warehouse builder.Is it possible in oracle warehouse builder 10.2.0.2.8.
If their is any work arounds please let me know....
Regards
Kumar

Hi Kumar,
no, the target db must be oracle.
Regards,
Carsten.

Lookup Table and Target Table are the same

Hi All,
I have a requirement in which I have to lookup the target table and based on the records in it, I need to load a new record into the target table.
Being very specific,
Suppose I have a key column which when changes I want to generate a new id and then insert this new value.
The target table record structure looks like this
list_id list_key list_name
1 'A' 'NAME1'
1 'A' 'NAME2'
1 'A' 'NAME3'
2 'B' 'NAME4'
2 'B' 'NAME5'
As shown the target table list_id changes only when the list key changes. I need to generate the list_id value from within OWB mapping.
Can anyone throw some light as to how this can be done in OWB???
regards
-AP

Hello, AP
You underestimate the power of single mapping :) If you could tolerate using additional stage table (with is definitly recomended in case your table from example will account a lot of rows).
You underestimate the power of single mapping :) It you could tolerate using additional stage table (witch is definitely recommended in case your table from example will account a lot of rows), you could accomplish all you need within one mapping and without using PLSQL function. This is true as far as you could have several targets within one mapping.
Source ----------------------------------------------------- >| Join2 | ---- > Target 2
|------------------------ >|Join 1| --> Lookup table -->|
Target Dedup >|
Here Target your target table. Join 1 operator covers operations needed to get existing key mapping (from dedup) and find new mappings. Results are stored within Lookup Table target (operation type TRUNCATE/INSERT).
Join 2 is used to perform final lookup and load it into the Target 2 the same as Target
The approach with lookup table is fast and reliable and could run on Set base mode. Also you could revisit lookup table to find what key mapping are loaded during last load operation.
Serhit

Plz tell me about witch module is the best for me

Dear Frnds.....
i am completed MBA (HR & Marketing)
Please tell me witch SAP module is the best one for my feature
Please give me some suggestions.....

Welcome to the forum.
For information, this is not the right forum to post such questions. The right forum is provided in the link.
[Forum: Career Center |Career Center;
thanks
G. Lakshmipathi

Hi gurus, plz tell me about absences valauation as it is needful for me.

help me in knowing about absences valauation as it is needful for me.how to configure it.

You use this function to valuate employees absences (unpaid leave, paid leave, illness, and so on) in Payroll.
Absences recorded for an employee in the Absences infotype (2001) can be valuated in Payroll according to a variety of criteria.
Example
An employee takes leave. He or she is to receive a vacation allowance.
An employee is ill for a long period of time. There may be certain country-specific criteria that affect the way in which the absence is valuated.
A employee has taken unpaid leave. His or her remuneration must be reduced accordingly.
You can define absence valuation rules in Customizing for Payroll to meet your various absence valuation requirements.
The following procedures for valuating absences are included:
"As-if" principle
An absence is valuated as if the employee had worked.
Formation of counting classes for factoring and cost accounting
Absences lead to a reduction in remuneration.
Valuation of absences using averages or constants
An absence is valuated according to the average number of hours or days worked, or as a constant using a fixed amount.
Individual calculation
Special processing is triggered for certain absences. Specific information from the employees master data, for example, is taken into account in special processing.
Reward points appreciated.
Thank You,

Plz tell me about different types of derived classes used in Java program

i wan't to learn about different types of derived classes used in Java programming

cool down bro i am new here i don't how it works
here.well i will try to be specific frm now on. thank
anywaysIt's not about "how things work here". The same is true for anything in life. How do you expect anyone to give you an answer when you cannot give a clear description.
You: "My car sorta ya know don't work. Canya sorta ya know fix it"
Mechanic:"WTF?"

Plz tell me about the asset/capital material type.

Hi,
Can you plesae tell me how can i handle the scenario of asset/capital item procurement starting from the material type.
If i will create seprate material type then from wchich material type i will copy it.
regards,
Dinesh

Hi,
You may create material type of Non-Stock / Non-Valuated. You can create asset code before creating the PO. Then you create PO for the material with account assignment A & the asset number as your account assignment.
Regards,
Prashant

Hello how can i download youtube videos on my macbook pro...plz tell me about downloader

hello how can i download youtube videos on my macbook pro...plz

nbar wrote:
Where are you getting (A) from? There is nothing inherently illegal about it, AFAIK.
You would be incorrect on that.
Commercial music videos are not to be downloaded, nor is there any difference between that and illegal torrent downloading of copyrighted material.
Such actions pertaining to commercial copyrighted videos / music videos (lots on youtube) is not legal.
Any distribution of videos, music or text without the express permission of the copyright-holder is copyright infringement
regardless of all of that, Google/Youtube clearly notes that its against their policy to allow same from their site on such materials (not all, but most of it there).
most such videos are not free and "open public domain" materials
5. Your Use of Content
In addition to the general restrictions above, the following restrictions and conditions apply specifically to your use of Content.
The Content on the Service, and the trademarks, service marks and logos ("Marks") on the Service, are owned by or licensed to YouTube, subject to copyright and other intellectual property rights under the law.
Content is provided to you AS IS. You may access Content for your information and personal use solely as intended through the provided functionality of the Service and as permitted under these Terms of Service. You shall not download any Content unless you see a “download” or similar link displayed by YouTube on the Service for that Content. You shall not copy, reproduce, distribute, transmit, broadcast, display, sell, license, or otherwise exploit any Content for any other purposes without the prior written consent of YouTube or the respective licensors of the Content. YouTube and its licensors reserve all rights not expressly granted in and to the Service and the Content.

Plz tell me BDC CALL TRANSACTION steps with simple example

hi,
plz tell me the steps
BDC CALL TRANSACTION steps with simple example

Hi,
BATCH DATA COMMUNICATION
About Data Transfer In R/3 System
When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.
In the process of replacing current applications and transferring application data, two situations might occur:
? The first is when application data to be replaced is transferred at once, and only once.
? The second situation is to transfer data periodically from external systems to SAP and vice versa.
? There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.
The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called ?batch input? or ?batch data communication?.
1. SESSION METHOD
2. CALL TRANSACTION
3. DIRECT INPUT
Advantages offered by BATCH INPUT method:
1. Can process large data volumes in batch.
2. Can be planned and submitted in the background.
3. No manual interaction is required when data is transferred.
4. Data integrity is maintained as whatever data is transferred to the table is through transaction. Hence batch input data is submitted to all the checks and validations.
To implement one of the supported data transfers, you must often write the program that exports the data from your non-SAP system. This program, known as a ?data transfer? program must map the data from the external system into the data structure required by the SAP batch input program.
The batch input program must build all of the input to execute the SAP transaction.
Two main steps are required:
? To build an internal table containing every screen and every field to be filled in during the execution of an SAP transaction.
? To pass the table to SAP for processing.
Prerequisite for Data Transfer Program
Writing a Data Transfer Program involves following prerequisites:
Analyzing data from local file
Analyzing transaction
Analyzing transaction involves following steps:
? The transaction code, if you do not already know it.
? Which fields require input i.e., mandatory.
? Which fields can you allow to default to standard values.
? The names, types, and lengths of the fields that are used by a transaction.
? Screen number and Name of module pool program behind a particular transaction.
To analyze a transaction::
? Start the transaction by menu or by entering the transaction code in the command box.
(You can determine the transaction name by choosing System ? Status.)
? Step through the transaction, entering the data will be required for processing your batch input data.
? On each screen, note the program name and screen (dynpro) number.
(dynpro = dyn + pro. Dyn = screen, pro = number)
? Display these by choosing System ? Status. The relevant fields are Program (dynpro) and Dynpro number. If pop-up windows occur during execution, you can get the program name and screen number by pressing F1 on any field or button on the screen.
The technical info pop-up shows not only the field information but also the program and screen.
? For each field, check box, and radio button on each screen, press F1 (help) and then choose Technical Info.
Note the following information:
- The field name for batch input, which you?ll find in its own box.
- The length and data type of the field. You can display this information by double clicking on the Data Element field.
? Find out the identification code for each function (button or menu) that you must execute to process the batch-input data (or to go to new screen).
Place the cursor on the button or menu entry while holding down the left mouse button. Then press F1.
In the pop-up window that follows, choose Technical info and note the code that is shown in the Function field.
You can also run any function that is assigned to a function key by way of the function key number. To display the list of available function keys, click on the right mouse button. Note the key number that is assigned to the functions you want to run.
Once you have program name, screen number, field name (screen field name), you can start writing.
DATA TRANSFER program.
Declaring internal table
First Integral Table similar to structure like local file.
Declaring internal table like BDCDATA
The data from internal table is not transferred directly to database table, it has to go through transaction. You need to pass data to particular screen and to particular screen-field. Data is passed to transaction in particular format, hence there is a need for batch input structure.
The batch input structure stores the data that is to be entered into SAP system and the actions that are necessary to process the data. The batch input structure is used by all of the batch input methods. You can use the same structure for all types of batch input, regardless of whether you are creating a session in the batch input queue or using CALL TRANSACTION.
This structure is BDCDATA, which can contain the batch input data for only a single run of a transaction. The typical processing loop in a program is as follows:
? Create a BDCDATA structure
? Write the structure out to a session or process it with CALL TRANSACTION USING; and then
? Create a BDCDATA structure for the next transaction that is to be processed.
Within a BDCDATA structure, organize the data of screens in a transaction. Each screen that is processed in the course of a transaction must be identified with a BDCDATA record. This record uses the Program, Dynpro, and Dynbegin fields of the structure.
The screen identifier record is followed by a separate BDCDATA record for each value, to be entered into a field. These records use the FNAM and FVAL fields of the BDCDATA structure. Values to be entered in a field can be any of the following:
? Data that is entered into screen fields.
? Function codes that are entered into the command field. Such function codes execute functions in a transaction, such as Save or Enter.
The BDCDATA structure contains the following fields:
? PROGRAM: Name of module pool program associated with the screen. Set this field only for the first record for the screen.
? DYNPRO: Screen Number. Set this field only in the first record for the screen.
? DYNBEGIN: Indicates the first record for the screen. Set this field to X, only for the first record for the screen. (Reset to ? ? (blank) for all other records.)
? FNAM: Field Name. The FNAM field is not case-sensitive.
? FVAL: Value for the field named in FNAM. The FVAL field is case-sensitive. Values assigned to this field are always padded on the right, if they are less than 132 characters. Values must be in character format.
Transferring data from local file to internal table
Data is uploaded to internal table by UPLOAD of WS_UPLOAD function.
Population of BDCDATA
For each record of internal table, you need to populate Internal table, which is similar to BDCDATA structure.
All these five initial steps are necessary for any type of BDC interface.
DATA TRANSFER program can call SESSION METHOD or CALL TRANSACTION. The initial steps for both the methods are same.
First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.
SESSION METHOD
About Session method
In this method you transfer data from internal table to database table through sessions.
In this method, an ABAP/4 program reads the external data that is to be entered in the SAP System and stores the data in session. A session stores the actions that are required to enter your data using normal SAP transaction i.e., Data is transferred to session which in turn transfers data to database table.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. You can either explicitly start and monitor a session or have the session run in the background processing system.
Unless session is processed, the data is not transferred to database table.
BDC_OPEN_GROUP
You create the session through program by BDC_OPEN_GROUP function.
Parameters to this function are:
? User Name: User name
? Group: Name of the session
? Lock Date: The date on which you want to process the session.
? Keep: This parameter is passed as ?X? when you want to retain session after
processing it or ? ? to delete it after processing.
BDC_INSERT
This function creates the session & data is transferred to Session.
Parameters to this function are:
? Tcode: Transaction Name
? Dynprotab: BDC Data
BDC_CLOSE_GROUP
This function closes the BDC Group. No Parameters.
Some additional information for session processing
When the session is generated using the KEEP option within the BDC_OPEN_GROUP, the system always keeps the sessions in the queue, whether it has been processed successfully or not.
However, if the session is processed, you have to delete it manually. When session processing is completed successfully while KEEP option was not set, it will be removed automatically from the session queue. Log is not removed for that session.
If the batch-input session is terminated with errors, then it appears in the list of INCORRECT session and it can be processed again. To correct incorrect session, you can analyze the session. The Analysis function allows to determine which screen and value has produced the error. If you find small errors in data, you can correct them interactively, otherwise you need to modify batch input program, which has generated the session or many times even the data file.
CALL TRANSACTION
About CALL TRANSACTION
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program by
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>
Messages into <MSGTAB>.
Parameter ? 1 is transaction code.
Parameter ? 2 is name of BDCTAB table.
Parameter ? 3 here you are specifying mode in which you execute transaction
A is all screen mode. All the screen of transaction are displayed.
N is no screen mode. No screen is displayed when you execute the transaction.
E is error screen. Only those screens are displayed wherein you have error record.
Parameter ? 4 here you are specifying update type by which database table is updated.
S is for Synchronous update in which if you change data of one table then all the related Tables gets updated. And sy-subrc is returned i.e., sy-subrc is returned for once and all.
A is for Asynchronous update. When you change data of one table, the sy-subrc is returned. And then updating of other affected tables takes place. So if system fails to update other tables, still sy-subrc returned is 0 (i.e., when first table gets updated).
Parameter ? 5 when you update database table, operation is either successful or unsuccessful or operation is successful with some warning. These messages are stored in internal table, which you specify along with MESSAGE statement. This internal table should be declared like BDCMSGCOLL, a structure available in ABAP/4. It contains the following fields:
1. Tcode: Transaction code
2. Dyname: Batch point module name
3. Dynumb: Batch input Dyn number
4. Msgtyp: Batch input message type (A/E/W/I/S)
5. Msgspra: Batch input Lang, id of message
6. Msgid: Message id
7. MsgvN: Message variables (N = 1 - 4)
For each entry, which is updated in database, table message is available in BDCMSGCOLL. As BDCMSGCOLL is structure, you need to declare a internal table which can contain multiple records (unlike structure).
Steps for CALL TRANSACTION method
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. UPLOAD or WS_UPLOAD function to upload the data from local file to itab. (Considering file is local file)
4. Loop at itab.
Populate BDCTAB table.
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>.
Refresh BDCTAB.
Endloop.
(To populate BDCTAB, You need to transfer each and every field)
The major differences between Session method and Call transaction are as follows:
SESSION METHOD CALL TRANSACTION
1. Data is not updated in database table unless Session is processed. Immediate updation in database table.
2. No sy-subrc is returned. Sy-subrc is returned.
3. Error log is created for error records. Errors need to be handled explicitly
4. Updation in database table is always synchronous Updation in database table can be synchronous Or Asynchronous.
Error Handling in CALL TRANSACTION
When Session Method updates the records in database table, error records are stored in the log file. In Call transaction there is no such log file available and error record is lost unless handled. Usually you need to give report of all the error records i.e., records which are not inserted or updated in the database table. This can be done by the following method:
Steps for the error handling in CALL TRANSACTION
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. Internal table BDCMSG like BDCMSGCOLL
4. Internal table similar to Ist internal table
(Third and fourth steps are for error handling)
5. UPLOAD or WS_UPLOAD function to upload the data from the local file to itab. (Considering file is local file)
6. Loop at itab.
Populate BDCTAB table.
Call transaction <tr.code> using <Bdctab>
Mode <A/N/E>
Update <S/A>
Messages <BDCMSG>.
Perform check.
Refresh BDCTAB.
Endloop.
7 Form check.
IF sy-subrc <> 0. (Call transaction returns the sy-subrc if updating is not successful).
Call function Format_message.
(This function is called to store the message given by system and to display it along with record)
Append itab2.
Display the record and message.
DIRECT INPUT
Thanks &regards,
Sravani

Plz tell me motrola support repeated key events.

Plz tell me about my this ancient problem that if some device support repeated key event than tell me its name and also provide a link to download it.
moreover also tell me about this strange content type:-
Here i have content type which is strange for me :- response.setRequestProperty("Content-Type","application/x-www-form-urlencoded") plz tell me either it will ok if i want to display some other language;
i want internationalization and want to set utf-8 but now tell me for what purpose is above content type and what would be its alternative. thanx

See http://www.kobjects.org/devicedb/ for which devices do and don't support key repeat events.
Application/x-www-form-urlencoded is defined at
http://www.w3.org/TR/html4/interact/forms.html#h-17.13.4.1
You can use application/x-www-form-urlencoded with UTF-8 provided that the server is expecting UTF-8 encoded bytes. However, I don't think many MIDP implementations support String.getBytes("UTF-8") so you may be stuck with doing the UTF-8 encoding yourself.
If you control the server, you may want to instead use DataOutput.writeUTF() from the client and DataInput.readUTF() from the server. Another alternative is to use XML, where you can employ character references for non-US-ASCII characters.

Tell me about passwordfile

hi;
1-Is it possible to connect to the database without a password
file
if yes then how?
2-how can we grant sysdba or sysoper privilege to an o/s
authenicated user which is also a database user?
3-plz tell me about ocp papers(dba)because it is my first
experience ?

You wii need to be more specific....?
see > Refurbished and Clearance iPod, iPad & Mac Products - Free Shipping

TELL ME ABOUT U PROJECT

HI,
1. I AM ATTNDING INTERVIEWS.IN MOST OF THE INTERVIEWS THEY R ASKING
TELL ME ABOUT U PROJECT.HOW TO ANSWER TO THIS QUESTOIN.
2.AND WHAT R U R ROLES AND RESPONSIBILITIES IN IMPLEMENTATION.
PLZ TELL ME ABOUT U PROJECTS AND HELP ME.
DONT WORRY I WILL ASSIGN FULL POINTS.
REGARDS
VENKAT.

HI,
THANKS FOR U QUICK RESPONSE.
U SAID TELL SOME UNIQUE REQUIREMENTS,PROBLEMS U FACED
N SOME REPORTING REQUIREMENTS.
BUT I DONT KNOW ANY THING.
TO TELL FOR ME SDN WILL NOT ALLOW U, U SAID.
GIVE U R PHONE NUMBER I WILL CALL U.
REGARDS
VENKAT.

ODI metadata query to find source and Target table for Interface

Hi Experts,
Client is migrating there source from EBS 11.5.10 to R12. They are in ODI BIApps. 7952 version.Since,all there mappings are customized they are not bothering about support from Oracle as far as BIApps is concerned.
Now,we need to know how many ODI mappings will be impacted when source EBS is migrating from 11.5.10 to R12 and so that we can only target those mappings accordingly.
So,please provide me with below inputs:
1) Any metadata query which will give me the source table and target table information's against an interface even-if the main interface source is another interface.
2) What are the other stuffs I need to look from point of view of mapping changes when the source is upgrading.e.g. only source table change is enough or I need to look into other stuffs.I feel,it is boiling down to create a separate source adapter for R12.
Regards,
Snehotosh

SELECT C.TABLE_NAME AS "Target Table Name",
     A.COL_NAME AS "Target Field Name",
     Wm_Concat(G.SOURCE_DT) AS "Target Data Type",
     Wm_Concat(G.LONGC) AS "Target Data Length",
     Wm_Concat(TXT) AS "Transformation Rule",
     Wm_Concat(DISTINCT F.TABLE_NAME) AS "Source Table Name",
     Wm_Concat(D.COL_NAME) AS "Source Field Name",
     Wm_Concat(D.SOURCE_DT) AS "Source Data Type",
     Wm_Concat(D.LONGC) AS "Source Data Length"
FROM
     SNP_POP_COL A JOIN SNP_TXT_CROSSR B ON A.I_TXT_MAP=B.I_TXT
     JOIN SNP_POP C ON A.I_POP=C.I_POP
     JOIN SNP_TXT E ON A.I_TXT_MAP=E.I_TXT AND B.I_TXT=E.I_TXT
     LEFT OUTER JOIN SNP_COL D ON B.I_COL=D.I_COL
     LEFT OUTER JOIN SNP_TABLE F ON F.I_TABLE= D.I_TABLE
     LEFT JOIN SNP_COL G ON A.I_COL=G.I_COL
WHERE POP_NAME = 'XXXXXXX'
GROUP BY C.TABLE_NAME,A.COL_NAME ORDER BY 1

Add a new record in database table without using table maintance generator

Hi Expart ,
Plz. tell me how to add new record in database table without using table maintance ganerator ....give me one ex.
Regards
Bhabani

Hi,
The other way to safely handle the modification of tables is through is by programs that can be done with SE38 or SE80.
To insert into database table we use INSERT statement :
1. To insert a single line into a database table, use the following:
INSERT INTO <target> VALUES <wa>.
INSERT <target> FROM <wa>.
2. To insert a several lines into a database table, use the following:
INSERT <target> FROM TABLE <itaba>.
Or even we can use MODIFY statementas this single statement is used to insert as well as update the records of database table.
MODIFY <target> FROM <wa>.
or MODIFY <target> FROM TABLE <itab>.
thanx.
Edited by: Dhanashri Pawar on Sep 10, 2008 12:25 PM
Edited by: Dhanashri Pawar on Sep 10, 2008 12:30 PM

Plz tell me about in bdc source table to target table covertion

Similar Messages

Maybe you are looking for