PM Order integration with Controlling

Dear All,
Can anybody say detailed How to integrate PM Order with Controlling? What is the T-code and How to see the effect??
Thanks and Regards
Rakesh

Following are the points where PM-CO integration is involved:
1- Configuration for PM Order settlement: When settlement profile and allocation structure for PM Order type is configured, a list of "cost elements" is entered, which ensures that only the costs against relevant cost elements can be settled from PM orders.
2- Before the Settlement of a PM Order, a settlement rule is defined which defines the reciever where the costs would be settled from the Order. If the cost is to be settled on a "cost center" then the relevant cost center has to be mentioned here (cost center can also be direclty determined from technical object master data).
3- When settlement of a PM Order is run, costs get settled to the relevant cost center & both controlling & accounting documents are created by the system which can be viewed through t-code KOB1.
Regards,
Beenish.

Similar Messages

Training & events management integration with controlling

Dear TEM Gurus
I am doing the SAP TEM integration with Controlling module. I have run the Cost transfer wizard with all the settings.
But while running the programme RHXCCOS0 HR Document is not created.
it doesnt even show any error message. Pls suggest
If any body has any doc related to this pl pass on.
Thanks & Regards
Vidushi

What functionality are you looking for?

Sales Order Integration with e-Commerce Solution Venda

To all you gurus out there
My client is implementing the e-commerce solution Venda to process Credit Card Sales.
In all the posts and information I have read, there is a) integration required between the e-commerce solution
Q1 - Is the integration between e Commerce to ERP SD?
Q2 - The integration will create a Sales Order in SD with Credit Card Processing information? I will need to configure the Credit Card Processing in ERP?
Q3 - My client wants to collect the credit card payment from the Customer at the time of order placement and not at time of delivery. This creates the problem of how the pre-payment posting is created at time of Sales Order create.
Has anyone encountered this requirement and how was this resolved?
Any insight would be greatly appreciated.

Lauren
I don't have experience with Venda, but I have worked on SAP CRM internet sales and home grown E commerce solutions, hence feel qualified to answer you.
Q1 - Is the integration between e Commerce to ERP SD?
Ans: Yes. Because orders created in the E commerce stores pass to ERP via Middleware and hence both ERP and Ecommerce should have common master data ( customers, Materials, Pricing) and configuration, esp. Pricing procedures, partner functions, Availability/credit checks should be similar,
Q2 - The integration will create a Sales Order in SD with Credit Card Processing information? I will need to configure the Credit Card Processing in ERP?
Ans: Customers will create orders on your E-commerce site (Stores). You can capture and validate the credit card and get authorization from clearing center etc. on the web itself. Alternately you may just collect the credit card info from the customer and pass it along with the order to SAP where it will get validated/authorized. However the order will come over to ERP with credit card info and get fulfilled there. So you need to configure ERP for credit card processing. Especially here: SPRO/IMG/Sales and Distribution/Billing/Payment Cards and also in credit and Riskmanagement (Forms Of Payment Guarantee).
Also I am not sure Venda takes care of Credit card processing with your bank/clearing house. Usually there will be one more vendor/software and integration with that is needed for both ERP as well as E commerce software (Venda).
Q3 - My client wants to collect the credit card payment from the Customer at the time of order placement and not at time of delivery. This creates the problem of how the pre-payment posting is created at time of Sales Order create.
Ans: This is standard process and both SAP and your credit card processing software I talked about will be fully geared to do this. What happens is that a pre-authorization is take at the time of order and it will be checked again at Delivery for validity and so on.
Go through this documentation:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a6/b1853478616434e10000009b38f83b/frameset.htm
Hope this helps. Let me know.

Profit Center(Controling ) integration with SAP CRM Billing

Hi,
we are using SAP CRM5.O & R/3 4.7.
Can you please some body give the information of Integration CRM Service billing integration with Controling(profit center).
Regards
Chandra
Edited by: Chandra Sekhar Reddy.Botla on Apr 22, 2008 10:14 AM

HI Anup,
Thanks for your information .
Here i will explain teh business senario.
Here my client is doing service on behalf of Actual service Provider(ex: cell repairs, On behalf of Nokia my client dong service for the End customers. warranty ).
So that we creating service order & billing on end customer, but payer will be the brand (nokia) .
so here there is no expence relate transaction are posting. Here we are doing only billing (revenue related transactions). This revenue has to be posted to concern profit ceneter. Where we will give teh profit center integration with CRM Service.
Thanks in advance.
Regards
Chandra
Edited by: Chandra Sekhar Reddy.Botla on Apr 22, 2008 7:27 AM

GM integration with CO - MIRO Error message (GMCUSTOM009)

Hi all experts,
Any time an invoice is posted through MIRO, we are getting an error "Full Integration with CO is mandatory. Check your entries." (Message number: GMCUSTOM009)
Our grants management module is active.
Does any one have any ideas as to why this error is popping up?
It appears as if one can change this error to a warning using the "Change message control for grants management" option, but what would the implications of that be?
Please advise.
Thanks.
A
Edited by: Ajay Vidya on Dec 31, 2009 5:40 PM

As explained in the message text; Grants Management (GM) is active for
the company code in question. Grants Management requires full
integration with Controlling (CO); this means that a G/L account or a
cost element must be supplied together with cost objects. The whole GM
updating process and the derivation of dimensions depend on this.
As mentioned in the procedure part of it:in your posting line, specify
either a G/L account or a cost element.
Alternatively, since this is a customizable message, you can change the
message control within GM. This would mean that you do not require
updating on grants or that your transaction simply does not take a cost
element or a GL account as a parameter.
As you may have found out already, this can be done via this
menu path in IMG: Public Sector>>Grant Management>>Grantee Management>>
Global Settings>>Change message control for Grants Management.
If after adjusting your settings you still get this error message during LIV parking (only when parking), please also make sure that you have note 1101466 in your system.
Kind regards
Mar

Training & Event Management - Integration with FI

Hi,
In the standard configurations Training & Event Management is integrated with Controlling(CO)but how to integrate Training & Event Management with FI.

What functionality are you looking for?

PM Integrations with Other Modules

Dear Experts,
Can u all pls list out what are all the major INTEGRATION of Plant Maintenance module with other modules?
And how it can be done?
Regards,
Rajesh

Hi Rajesh,
Let us consider one practical issue of Spare Parts purchase.
We prefer to inspect incoming material for compliance of our requirement.
1.While creation of material master, tick the 'Post to insp. stock' box in the Purchasing Tab.
2. If we do not want a task list / Result recording oriented inspection, in Quality tab, choose appropriate selections,
3.When that Spare is received, it will go to Quality Stock.
4. Maint. person can check it and transfer the stock to "Unrestricted Stock" through MB1B via 261 movement, giving a reason as Accepted after Inspection or Rejected.
5. Above procedure is a practical example of PM QM integration.
Integration between PM and PP
In the equipment Master, under the location tab, mention the PP work center, and in the task list under the Header give the system condition "0" ie M/C not in operation, before doing this in the custimosation under Maintennace and service order-general data-- "Create System Conditions or Operating Conditions" check the box for PM reservation.so when ever a maintenance order is raised against that equipment, it will block the prod.
The integration aspects of MM-PM are:
1) for non stock materials requirement, purchase requsition can be created from the plant maintenance order. PR is converted to the Purchase order. when ever goods receipt is done , the cost is directly booked to the plant maintenace order.
2) for stock materials requirement,,reservation can be created from the plant maintenance order and the material can be issued to the order against the reservation.
3) Like materials , for services also PRs can be created from the plant maintenace order.
Another integration is BOM - Bill Of Material.
With Equipment BOM, you can create a list of material through which equipment is created or in othre words you can mention the spares that you may require during the maintenance of the equipment.
FICO-MM-PM Integration
the integration points between PM and MM/FICO during the PM configuration.
Below are some integration aspects:
Integration with MM:
1.Material master record for Batch Managed material as Equipment
2.Reservations and Goods Issue for Maintenance Order
3.Material valuation class/types for refurbishment materials as equipment
4.Triggering PR from Maintenance Order
Integration with FICO:
1.Asset/Sub-Asset numbering in Equipment Master Data
2.Activity based costing for Operations performed through Maintenance Order
3.Settlement of accrued costs in Maintenance Order to G/L Account,Cost Center, Asset etc.,
If it is reallyuseful to you pls reward me with points
Regards
Satish
Edited by: P.Shanmuga Satish Kumar on Jan 24, 2008 6:57 AM

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Cross co. code controlling area - CO Real time integration with FI

Hi all of you,
We are in to New GL, and implementing one controlling area for all the company codes (cross company code cost accounting) with group currency "30". And my client requires the CO - FI Real time integration to take the segment reporting / profit center (new) FI reporting.
My basic doubt is, when we are implementing one CO area, we taking all the company codes as cost center groupings and creating the overhead cost centers. When doing Repost CO line items in CO, how system arrives the company code since we are not referring the FI document or Company code, how system will create the FI document in the company code.
Do we have any separate transaction to do the repost CO line items to hit the CO - FI real time integration?
Please give me your valuable suggestions to use the CO-FI real time integration with cross controlling area assigned to multiple company codes.
Thanks & Regards
Ramki

Thanks for your valuable reply Mr. Christian.
So you mean to say that, when we are maintaining the cost center groupings (per company code), same will be maintained for profit center and will be assigned to the individual company codes, right.
In CO - FI real time integration , I need to select the objects - company code and segment. Whenever any repost happened in the CO module, system will create one FI document referring to the real time objects. We have more than 12 company codes located in different countries. In this way, system is fulfilling the cross company code postings in CO and will generate the FI documents, right.
Please give me your valuable suggestion and when I am looking the note in Market place (91055), it is showing the CAD Interface.
Regards
Ramki
Edited by: Ramki on Feb 10, 2010 5:29 PM

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

SRM 7.0 for Public Sector integrated with FM (Budget Control System)

Hello!
I'm starting an implementation project of ERP 6.0 and SRM 7.0 for Public Sector.
It would be necesary the integration not only SRM with ERP but with FM (Fund Management), with BCS (Budget Control System) specifically.
Is it possible? has anyone experience on it?
Thks so much in advance and best regards!
Marcela.-

Hi,
Certainly... If you have FM implemented in your project, you will have to make integration with SRM.
I did it some 3 years ago and it was quite problematic (a lot of notes were created by SAP on this matter, also as initiative from our project), but since then, I assume, it should not pose specific problems.
Regards,
Eli

PS Integration with PP with respect to Make to order projects

Hi Experts,
I have a requirement that our customer is having only Make to order projects ,In this aspect Is there any Integration with PP.
Thanks In Advance.
Regards
Madan

Hi,
Please search the forum there are various threads releated to this topic.
There are various ways doing this.
Attach a finished material to the activity in cj20n and then run MRP .System will create Planned Orders/PRs on the basis of Material type whether the material is meant for internal Production or for prourment.
So in your case after MRP,a planned order will be created and then you convert to a Production Order.
Issue the raw materials to the production order and confirm the operations and a finished product will be produced and then you issue to your project.
Muzamil

Source version control integration with siebel

Hi All,
I am trying to integrate siebel tools with third party version control i.e svn
I have passed the required paramters in srcctrl bat & set the option in tools accordingly.
Checout/checkin happening fine.But files not getting created in SVN repository
Does any one has working srcctl bat file for the same
Appreciate all your help

Nothing much yet, but I found a website that has the batch file for integration with SVN.
Guess I have to contact the author to get more details:
http://arwaheem.wordpress.com/2008/04/30/siebel-version-control-source-code-integration-using-sub-version/

Version Control integration with SVN

We want to implement Version Control integration for Siebel Tools with Subversion (SVN).
After an informal chat with a consultant from Oracle, we got the reply like: Test, and see if it works.
Now for my question, does anyone know a project where they used SVN as the version control tool in a Siebel project?

Nothing much yet, but I found a website that has the batch file for integration with SVN.
Guess I have to contact the author to get more details:
http://arwaheem.wordpress.com/2008/04/30/siebel-version-control-source-code-integration-using-sub-version/

Service order billing in SD integration with PS

Hai Gurus,
My client is basically a civil construction one and we are in the process of
implementing SAP for them.
The scenario is my client gets sub contracting order from big construction
company and execute all the constrction and the entire related works.
The process flow is the actual service order price from the main constrction
company is around 50 crore, so my client keeps his margin and allocate
budget to execute the project as 40 crores.
Now the problem is how to integrate the SD service order billing and cost
captured for each and every activity in PS , so that my client actual cost
incurred is 40 crore but he has to raise bill after adding his profit as 50 crore
to main construction concern.
How to link this process of SD service order billing with PS.
Waiting for your positive reply.
Regards
sekar chand.

Thread closed

PM Order integration with Controlling

Similar Messages

Maybe you are looking for