PM_PARTNER_UPDATE change does not get reflected in CRM
Hi,
I'm using FM BAPI_GOODSMVT_CREATE to create a goods receipt. This function module calls a BAdi MB_DOCUMENT_BADI where I coded the method MB_DOCUMENT_UPDATE to update equipments. The change that I need to do is to delete a partner(sold-to) on the equipment. I'm using PM_PARTNER_UPDATE to update the equipment. I was able to do it successfully. But the issue is, we have CRM5.0 and the change needs to be reflected back on the Iobject in CRM. This does not happen when an equipment is changed in my code. However, if I go change the equipment in IE02 the change replicates.
Here is my code,
LOOP AT i_partinfo INTO wa_partinfo.
CLEAR wa_ihpa.
wa_ihpa-objnr = l_objnr.
wa_ihpa-parvw = c_soldto.
wa_ihpa-obtyp = c_obtyp .
wa_ihpa-updkz = c_delete.
wa_ihpa-counter = wa_partinfo-counter.
wa_ihpa-parnr = wa_partinfo-parnr.
APPEND wa_ihpa TO i_ihpa.
CLEAR wa_partinfo.
ENDLOOP.
IF NOT i_ihpa[] IS INITIAL.
*Delete Sold to Partner function
CALL FUNCTION 'PM_PARTNER_UPDATE'
TABLES
fxihpa = i_ihpa[].
ENDIF.
Thanks in Advance.
Hello,
i have at the moment exactly the same issue with PM_PARTNER_UPDATE.
What was your solution to have a BDOC in the end?
Thank you
Best regards
Manfred
Similar Messages
-
New changes are not getting reflected in the bam reports.
Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj AbrahamHi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham -
Changes are not getting reflected in Process Chain after changes.
Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
SanjayHi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani...... -
Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment
Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, ShrutiYou should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter -
Change in Country code does not get reflected in iTunes in iPhone
Hi,
I just moved to USA from India. In my apple id, I changed the contact info, and country code and ofcourse the payment card details. Then I synced up my iPhone on my laptop. When I try to search the apps (Bank Of America Mobile Banking) which are available on USA Store are not visible on my iTunes app on iPhone. But they are visible in iTunes on my laptop.
I have rebooted my iPhone, laptop and then synced them. Still the issue remains.
Thanks in Advance
AnandI got it..
Just tried to install an free application which was available in India store. Then I got a message saying I cannot use store from this country and it took me to USA store. From there I could download necessary app from USA store. -
CHANGES MADE IN ECC NOT GETTING REPLICATED TO CRM - CUSTOMER
Hi All
We are currently working on CRM 4.0 connected to ECC 4.6C.
All the middleware connectivity have been configured and we have a process of creating customers (BP) in CRM which inturn flows to R/3. We dont create customers in R/3 system. Now when i make any changes to the customer in R/3 system i dont find a queue getting generated in SMQ1 in R/3 system and also the changes not getting reflected in CRM system. But any changes made to CRM is flowing to backend R/3 system.
Settings like groupings, number ranges, PIDE etc are configured.
Please let me know how to sove this issue.
Cheers
RameshThe issue lies in the following customizing in your R/3 system:
1) Go to tx SM30 in the R/3 system.
2) Open the view CRMRFCPAR.
3) For CUSTOMER_MAIN and CUSTOMER_REL objects you need to uncheck the 'Discard' checkbox Save.
This will make sure that the delta changes for your Customer Master flow
to the CRM system.
Check out these notes as they maybe of assistance
914437
504169
504265 -
Reg: View changes not getting reflected
Hello All,
I made some view changes like field mapping for the Family Dependents view.
I Created the Activity and deployed using NWDI but the changes are not getting reflected.
Please assist me in resolving the issue.
What might have gone wrong? and how to solve the problem.
Thanks in advance for the time.
Regards,
PramodThe issue is with the activities queued up in TCS Deployer.
Rerun the TCS deployer and the issue is solved.
Thanks,
Pramod -
Chnages in the Graph properties are not getting reflected in the Browser.
Hi,
I have made some changes in the Graph properties in web template,
Eg. : 1. change in color of a series for a columnar type graph
2.change in the Text properties of Graph Series..
When I save the template and try to run in the Browser, these changes are not getting reflected.
Can anybody help me in this aspect ?
Thanks.
Regards.
Amol BadeSame here :´(
Thanks In Advance
Juan -
Enabling "Save This View" button - change does not stick
Running SharePoint 2013 Server Standard
I have several sites. For some the "Save This View" choice when filtering a view is enabled. However, there are some for which the choice does not display.
I located the setting for this in Editing the Page, Miscellaneous options for which the check button is "Disable 'Save This View'" button. I uncheck the box, hit Apply or OK. No errors. However, the change does not get executed.
I have admin rights to do anything.
Please advise as to other settings that may be overriding this.
Any ideas? Seems to be a bug.Check below:
http://www.sharemuch.com/2014/03/13/how-to-do-advanced-sharepoint-list-view-filtering-with-query-string-paramters/
http://office.microsoft.com/en-in/sharepoint-help/use-the-list-view-web-part-HA102771012.aspx
Check server render option
If this helped you resolve your issue, please mark it Answered -
Changes in webservice not getting reflected
Hi Experts,
I am creating a webservice by creating Java project in NWDS 7.0.14 and NW04s SP14 portal.
When I make some change and deploy, the changes does not reflect in webservice.
I tried deleting .ear file generated everytime and deploying newly generated .ear but it didn't work.
Has anybody faced this kind of issue? Any pointers to this will be much appreciated.
Thanks,
MehulHi,
What the type of changes are you doing? Structural (Parameters change) or Logical (Only on code)?
How are you testing the Web Service? With wsnavigator?
Best regards -
I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?
The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil -
Enhancement not getting reflected in Info Cube
Hello Friends,
I have made enhancement for getting additional data in the InfoCube 0SD_C03 fro data source 2LIS_13_VDITM .I have made changes in Communication Structure and transfer structure as well . But i am getting the required data in the psa and addition fields are not getting reflected in the infocube . Please suggest me a solution .
Regards
Nilesh VakilHi,
You have to map the Rules in two Transformations. One for DataSourec to InfoSource and InfoSource to Cube.
Confirm that you entered all the infoobjects and those compound objects too into the cube, Don't forget to map compound objects in transformation rules. Activate every single object individually.
Did you create DTP for cube? In BI 7.0 for InfoPackage by default "psa only".
Aparna. -
PHOTO IS NOT GETTING REFLECTED IN ADOBE FORM
Hi experts
We have tried the below code to dispaly photo in webdynpro integrated with adobe forms
CALL FUNCTION 'HR_IMAGE_EXISTS'
EXPORTING
p_pernr = v_obj_id
* P_TCLAS = 'A'
* P_BEGDA = '18000101'
* P_ENDDA = '99991231'
IMPORTING
* P_EXISTS =
p_connect_info = l_connect_info
EXCEPTIONS
error_connectiontable = 1
OTHERS = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'SCMS_DOC_READ'
EXPORTING
* MANDT = SY-MANDT
stor_cat = space
crep_id = l_connect_info-archiv_id
doc_id = l_connect_info-arc_doc_id
* PHIO_ID =
* SIGNATURE = 'X'
* SECURITY = ' '
* NO_CACHE = ' '
* RAW_MODE = ' '
* IMPORTING
* FROM_CACHE =
* CREA_TIME =
* CREA_DATE =
* CHNG_TIME =
* CHNG_DATE =
* STATUS =
* DOC_PROT =
TABLES
access_info = lt_infos
* CONTENT_TXT =
content_bin = lt_image_bin
EXCEPTIONS
bad_storage_type = 1
bad_request = 2
unauthorized = 3
comp_not_found = 4
not_found = 5
forbidden = 6
conflict = 7
internal_server_error = 8
error_http = 9
error_signature = 10
error_config = 11
error_format = 12
error_parameter = 13
error = 14
OTHERS = 15.
CHECK sy-subrc = 0.
READ TABLE lt_infos INDEX 1 ASSIGNING <fs_info>.
CHECK sy-subrc = 0.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = <fs_info>-comp_size
first_line = <fs_info>-first_line
last_line = <fs_info>-last_line
IMPORTING
buffer = l_employee_photo_content
TABLES
binary_tab = lt_image_bin
EXCEPTIONS
failed = 1
OTHERS = 2.
but the photo is not getting reflected in the adobe forms .
and also i have tried the url method but it doesnt work .
please help me out .First, have you set a breakpoint in this code and made sure that you are getting data into lt_image_bin? That would seem to be the first place to start.
Then the question is how are you trying to pass the image into the Adobe Form? Are you passing an XSTRING context attribute into the form interface? Have you marked that part of the interface as an image? Are you setting the MIME Type parameter of the form interface as well. You really haven't posted any details about what you are doing on the Adobe Form side. -
TDS line items are not getting reflected in J1INCHLN
Hi Experts,
While generating TDS challan we are not getting advance line items in J1INCHLN screen
We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
Below is the example
XYZ 43,000.00
XYZ 46,000.00
Bank 96,329.00-
S/Tax Interim-In Cr 5,160.00
S/Tax Interim-In Cr 3,864.00
ST Interim E.C-In Cr 103.00
ST Interim E.C-In Cr 77.00
ST Inter H E.C-In Cr 52.00
ST Inter H E.C-In Cr 39.00
TDS Pble Contractors 966.00-
TDS Pble Contractors 1,000.00-
I checked the below possibilities for reason why its not getting reflected
Vendor master having recipient type
WITH_ITEM table updated with recipient type
In the line item also having Business Place and section code
Please suggest me is there any way to resolve the issue.
Thanks & Regards,
AIMHi,
Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
Regards
Divya S
Maybe you are looking for
-
I'm having some issues with the mobileme web gallery widgets in iWeb. I first noticed when one of the widgets would not change photos as you roll over it, even though I had multiple photos in the gallery. I unpublished the gallery and re-published us
-
Enabling the DisplayPor​t for dual external monitors on my X201?
Just got my new Win7 X201 and am trying to connect my 2 19" external monitors. The VGA connects fine, but the other monitor connected via a DisplayPort 2 DVI converter is not recognized by the X201. How do I get this going? Solved! Go to Solution.
-
Test cold backup database in archive mode
Hello, We doing every week a cold backup from Oracle database, us database is in archive mode. We would like to test us cold backup in other server but the drive where we have to copy the datafiles and logs and rollback are different on this server.
-
Search tab malfunction in RoboHelp 8 (WebHelp output)
I am trying to create a WebHelp output after importing a Word doc into RobobHelp HTML 8. Once I generate WebHelp as the primary layout, the TOC and Index tabs work fine. However, the Search tab isn't working: Regardless of the key word I use in my
-
Is there a "university" that would host my textbooks?
Hi Community! I am a teacher who produces free courses for IT topics for people that use my companies products. I applied for an iTunes U account with Apple but they only accept 2-4 year accredited colleges or universities (and not companies that off