PO Approval: OAF Form -Whether notes during rejection can be made mandatory

Hi,
During PO Approval process, when the approver receives the notification and when the notification is clicked.
If the approver choses to reject the PO, then is it possible whether entering notes during PO Rejection can be made mandatory at OAF form.
As business considers this of higher importance, if the reason for rejection could be captured during the PO Approval process itself.
Any inputs in this regard, shall be highly appreciated.
Regards,
Saurabh Singhal.

Ok, so you are saying that it is okay to go thru the ordering process with someone and tell them the phone is in stock and give you one price but then not actually order the phone and not tell you, so you then have to call back and go thru 3 reps before anyone even tells you? Original end date for the promotion is tomorrow. When I spoke to the rep last Saturday she even told me the phones were in stock. Why should I have to pay a different price when I went thru the ordering process and was quoted at only having the $30 activation fee because they stopped something and didn't tell me and they have all of this in the notes!!

Similar Messages

Custom Oaf form inserting blank records into custom table

Hi all,
I have developed custom OAF form to insert vendor details mapped to custom table.
Oaf form is working fine without giving any error.
In back end blank records is inserting into the custom table i.e. only WHO columns (creation_Date, created_by, last_update_login etc.) values are populating correctly but the
data which i am entering in OAF form is not populating into the table.
Please help, tnx in advance.
Regards,
Mohit

Do you have mapping of your form fields with the view object and view attribute ?

Forms are not opening if one of the 2-node 11gR2 DB instance is down

recently we have upgraded database from 2-node 10gR2 RAC to 2-node 11gR2 instance.
But, if one of the instance is down, the forms are not picking up the 2nd node and forms are not opening.
Can someone help me to fix this issue as its PROD.

Hi,
Please send the output of below command, run this in your application node.
"tnsping MMAPPS_BALANCE"
Your SID_BALANCE TNS-ENTRY should look like below on the application server. Below is just for example of 3 node rac. You should not edit tnsnames.ora file manually, if you configure your context file properly, autoconfig will generate properly.
LABDB_BALANCE=
        (DESCRIPTION=
            (ADDRESS_LIST=
                (LOAD_BALANCE=YES)
                (FAILOVER=YES)
                (ADDRESS=(PROTOCOL=tcp)(HOST=node2-vip.hingu.net)(PORT=1522))
                (ADDRESS=(PROTOCOL=tcp)(HOST=node1-vip.hingu.net)(PORT=1522))
                (ADDRESS=(PROTOCOL=tcp)(HOST=node3-vip.hingu.net)(PORT=1522))
            (CONNECT_DATA=
                (SERVICE_NAME=LABDB)

Object form is not getting displayed for few users

Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.

Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari

OAF Forms Moving from 11i to R12

HI
I have some customized OAF forms in 11i, and we are up-grading to R12, now i have compiled OAF Forms but this error comes when i try to run these forms in R12
"You have encountered an unexpected error. Please contact the System Administrator for assistance."
I have compiled these forms using this command in putty
java oracle.jrad.tools.xml.importer.XMLImporter /mnt/oracle/ERPROD/apps/apps_st/comn/java/classes/oracle/apps/ar/advance/webui/AdvanceReqFormList.xml -rootdir /mnt/oracle/ERPROD/apps/apps_st/comn/java/classes/ -username apps -password ****** -dbconnection "(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = IP) (PORT = 1521)) (CONNECT_DATA = (SERVER = dedicated) (SID = TEST) ) )" -rootPackage /
and after running this command following message appears
Importing file "/mnt/oracle/ERPROD/apps/apps_st/comn/java/classes/oracle/apps/ar/advance/webui/AdvanceReqFormList.xml" as "/oracle/apps/ar/advance/webui/AdvanceReqFormList".
Import completed.
Kindly Help

Hi,
Check whether the Page is imported successfully or not using below method.
Begin
jdr_utils.printdocument('/oracle/ERPROD/apps/apps_st/comn/java/classes/oracle/apps/ar/advance/webui/AdvanceReqFormList');
end;
Regards
Jyothi

Send Email from approval task form

In my reusable workflow, I have added an approval action. Everything works perfectly. What I want is - When approver comes to approval form, he should be able to send notification email to the initiator (From that form) that he has started working on that document.
What I have tried - I have added a button clicking on which will submit the form to initiator.
But it fails. possible reason - when I create a data connection in workflow's infopath form to submit form as email, I am getting following warning
"Domain trust form templates cannot be sent as email attachments. to fix this problem, modify the form option to change the security level of form template to restricted".
I also tried to update status field and wait for it to changes in workflow and send an email from sp designer workflow. it didn't work.
Please help or suggest any other possible way to achieve this functionality (Send Email from approval task form to initiator).

Hi mry,
I could reproduce on my SharePoint 2013 on-premise based on your another
post.
Based on the the following article, SharePoint workflow cannot use the InfoPath form in restricted mode which doesn't allow the data connection, but as your image warning message shows sending InfoPath form as mail attachments will need restricted level.
http://msdn.microsoft.com/en-us/library/office/ee526352.aspx
You can consider to send a mail to initiator in "Whe a Task Completes" step when you click button approved/rejected, and construct the current task form link format as follow,
http://sp/_layouts/15/WrkTaskIP.aspx?List=WorkflowTasksListGUID&ID=[%Current Task:ID%]
Thanks
Daniel Yang
TechNet Community Support

Error while opening the custom forms-''function not available to this respo

Error: Function not available to this responsibility , change responsibility or contact ur system administrator
Hiiiii,
While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
but the $Apache_top is not there...
can u plz tell me the solution....
Thanks
Meenakshi Verma

user609981 ,
If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
--Mukul

Credit memo (CM) Approval limits set are not being checked in CM creation

Hi,
Customer: ARROW ELECTRONICS INC
SR: 6502816.993
Customer has set the approval limits for credit memo in Receivables
He has set the approval limit as -500 to 0 for a user X.
Created an invoice for 550 $
Gone to Ireceivables and created a dispute for the complete amount (-550$) of the invoice.
Find that the notification is going to the user X even when the amount is not within the approval limits set.
He is able to approve the notification and it is going to the next level approval.
Once that is done the credit memo is getting created.
Checked the packages involved in this.
ARWCMWFB.pls
Find that there is no checking of the approval limits in the package.
Please help me in knowing on whether this is an intended functionality.
Thanks and regards,
Hareesh

Hareesh
Using HR Hierarchy
1. Define three approvers A, B, C for the same reason code and with different approval limits (as this is credit memo the guy with highest negative amount has is the final approver).
2. A reports to B and B reports to C
3. A is approval limit is from -100 to -500, B can approve from -500 to -1000 and C can approve from -1000 to -1500 (all of them have same reason code and currency code).
4. Make sure all of them are employees.
5. Make sure you **DO NOT** check the flag Primary Approver for any of these approval limits in the approval limits screen.
6. In the employees -- Assignments For A, enter supervisor as B, and For B enter Supervisor as C.
7.No enter an invoice for 1200 and complete it.
8. Request for credit from iReceivables for the same invoice for -1200.
9. Now you can see that the notification will go to B and C for approval.
Using Approval Limits hierarchy:
If you do not want to use the employee setup, they can always, use the primary check box. With the same example as above, check the primary check box for A, B and C.
When you request for credit, first A gets, next B gets it and then C gets it.
If you check for only C which is the final approver, workflow will send only one notification and once C approves it will forward.
Ofcourse, before any of these guys are approving, collector assigned to the customer has to approve.
And after all these approvals one more Role (called Receivable Role which can be anybody according to the WF definition) has to approve before the credit is generated).
Now, I am not sure what the customer wants. Do they want multiple approvals or single approval? If they want multiple they have to use the first approach. If not they can use the second approach.
I did a test case again and these comments are the results of the test. I did this on 11.5.9.
Let me know if you have any questions. Also please refer to the metalink note 284804.1How Does Credit Memo Workflow Notify Multiple Approvers?.
Thanks
Nagamohan

InfoPath forms suddenly not saving for some

I have three different Infopath forms that have over the past two months developed an inability to sometimes save to their SharePoint Document Library. These are Full Trust forms with lots of custom code on the back end. So far I have not recieved any tickets
for people not being able to Submit a form, but when approvers go in to approve a form (all in custom code), usually they recieve no errors, but the form does not save even though to them it appears to do so. The custom code from the minute they
press the Save button is in try/catch, so I would get an error if one was present.
For a few of the people they start getting this message::TrxResult:GeTrxResultBusinessLogicFailedMessge- One or more messages failed execution. Please check message TRxResult value for more details." But after a while they stop getting it but the forms
still do not save.
The thing is one of these forms has been in production for almost four yeears and we have never seen this error message, or the inability to actually save the form happen before. It only happens to certain people and it happens even if they try a diferent
PC. It seems to be happening at only a couple locations (we have over 100 locations on our network), so it could be location specific, as in, someone installed something locally that is silently interferring with Infopath, but I have never heard of anything
doing that.
There is absolutely nothing strange going on in the save routine:
Public
Sub FormEvents_Save(ByVal
sender As
Object,
ByVal e
As SaveEventArgs)'
' See if you are allowed to save the form
If bAllowSave =
True
Then
e.PerformSaveOperation()
End
If
e.CancelableArgs.Cancel =
False
-Barry
End
Sub
I
also do not see anything in our logs and most of the time the users see no indication that the form did not save. Does Does any any of this ring a bell to anyone? Thanks.

here is one of the forms that is not working in Reader (except on my wife's PC and another Mac) it is the current PDF form i am having trouble with. If we can resolve the issue then it will help me resolve my other forms too. I have made them all using the same process. (Maybe therein lies a problem)
Form Creation Process:
Create initial page layout in Pages (mac app for those that are not familiar)
Export as PDF
Open PDF in Acrobat Pro 9 (started making forms in v8 now i am working in v9 - both have produced this problem)
Run Form wizard, adjust fields, save final version of form
Extend Features in Adobe Reader (via Advanced menu) - Follow steps to save a new Reader Enabled version
Email new RE version to co-workers
All can fill out the form, only a couple can actually save the partially completed / fully completed form for reference, filing, or submission.
Am I missing something? Thanks for all the help so far!

If PO is created Or approved reference PR, should not allow to change th

Dear All
I have one requirement
If PO is created Or approved reference PR, should not allow to change the quantity or line item.
And is it possible to assign this to user specific whether to allow or not .
Thanks in advance
Mahisap

Thanks for reply
MY Requirements are
1)A PR line item should not be changed after creation of PO or after PO approved
2)In case PR is referenced for multiple po's then should check all the po's
3)if po line item deleted then system should allow to change PR
4) Assign it to user specific
plz get me outoff this
regards
mahisap

Post upgrade from 11.5.10.2 to 12.1.3 Forms are not opening

Hi,
After upgrade from 11.5.10.2 to 12.1.3, When we click on any of the form link, forms are not opening.
No error detected in $LOG_HOME/logs/ora/10.1.3/j2ee/ folder.
Please help as we are stuck here.
Regards,
Shrikant

Shrikant P Y wrote:
Hi,
We are using Linux X86 server for front end and UP-UX for database.
There were no issues during upgrade.
Source and target both are same.
When we click on any forms instead of form launcher servlet system is using /dev60cgi/f60cgi. Checked the profile value and it is form/servlet.
Do you meet the minimum requirements as per (Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1])?
please check apache log files?
What is the browser you use and the client OS?
Can you reproduce the issue from other clients and/or using different browser?
Did AutoConfig complete successfully?
Do you have all the application services up and running?
Please check the application.log file for details about the error.
Running a Trace on a Form [ID 148143.1]
what do you see when you enable java console trace?
:) ApPsMasti ;)
sharing is caring

Doing a Trace on the ARXADLMT Approval Limits form No Select statement i

Hi I want to see the all the SQL statements executed when I open the AR Approval Limits form(ARXADLMT). So I enabled the TRACE from the Menu(supplying password) , then opened then form and did a Query-> Execute. (The base table for the block is AR_APPROVAL_USER_LIMITS.Then I turned off the trace exited applications and went to the USER_DUMP_DEST directory of the database. From here tkprofed the latest trace file .When I look at the output file I cant see any Select statements at all. At least I should be seeing a select on the base table AR_APPROVAL_USER_LIMITS. Maybe I havent understood this process well enough- what am I doing wrong.Why is the trace not containing the select statement?
Edited by: [email protected] on 13/06/2010 03:18

>
... From here tkprofed the latest trace file ...
>
Pl post details of your OS and EBS versions. The latest trace file may not be the correct one. Pl search the trace files for "AR_APPROVAL_USER_LIMITS" to find the right trace file.
How To Trace From Form, Report, Program And Others In Oracle Applications (Doc ID 130182.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=130182.1&h=Y
HTH
Srini

Adobe Interactive forms are not editable following an EHP6 upgrade, how do we correct this?

Good day,
We are currently going through an upgrade to EHP6. We have set up a test parallel environment that was copied from prod and applied EHP6 for a compare.
During our initial tests, we have found that Adobe interactive forms are not loading properly following the upgrade. 11 out of the 13 interactive forms currently implemented in the portal are no longer editable. When you go to select a value from the drop-downs or input a value in the field the fields remain blank. This is a high priority as all users perform their PA actions via MSS and through workflow approvals using Abode interactive forms.
Does anyone have any ideas of how to fix this issue or have come across this issue before?
Thanks in advance,
Christine

Hi Christine,
maybe a restart of the ADS-Server helps you out. I can remember a similar case where the restart helped.
IF not, check if you got the latest patch of the ADS, maybe the upgrade of the erp causes this error, because it pass now more data to the ads than before.
IT's just a suggest. Let us know, if that helped you out.
Regards
Florian

How to scroll presenters notes during presentation?

I have some slides with quite a lot of notes. How do I scroll the presenters notes during a presentation when I am using the Presenter Display? I can see the notes, but they are too long to show in the window. I can't figure out how to scroll the notes to read the rest of the notes.
Many thanks,
Darren

Is it bad form to answer my own question?
I finally found the answer in the User Guide:
"To scroll presenter notes up or down, press the U or D key."

Week No. on new P45 forms does not align and prints outside the ...

The new P45 sapscript (HR_GB_P45_A4_D & HR_GB_P45_A4) does not align the Week number within the box of the pre-printed HMRC stationery. The week number appears on all three forms (1/1A, 2 and 3), being page 1,2 and 3 of the sapscript, and all are printed out of their appropriate box.
Has anyone else encountered this problem ?.
I can correct this as we currently use a Z version of the sapscript. I have checked the Z version (a recent copy) of the SAP original sapscript to ensure that the original will also have a mis-alignment, which it does. However, despite changing this I would still like SAP to correct their mistakes. I must admit I am VERY surprised that nobody else has encountered this problem as any week number being displayed on either the HR_GB_P45_A4 or HR_GB_P45_A4_D form will not align correctly.
Jason
Edited by: Jason Stratham on May 26, 2009 2:55 PM
Edited by: Jason Stratham on May 26, 2009 4:28 PM

P45 form printing to tray 1,2, and 3.
On a slightly related subject we occassionally find that our lexmark three bin printer seems to forget it's bin setup and every now and then the pages will come out on the wrong HMRC pre-printer stationey. We have double-checked the paper loaded and we ONLY have the P45 form 1/1A in try 1, form 2 in tray 2 and form 3 in tray 3. However, despite this it still occassionally goes wrong, with the form 1 and 2 printing to tray 2 and form 3 printing to tray 3. This normally happens after a long weekend, so I don't know whether this is a printer driver caching problem or suchlike. Has anyone had any similar problems?.
Jason

PO Approval: OAF Form -Whether notes during rejection can be made mandatory

Similar Messages

Maybe you are looking for