PO : Condition type ZB00/RB00 (Value) and NETPR NETWR value printing Zero

Hi Experts,
I have created a Purchase Order line Item having the condition type ZB00(Value)
the values of NETPR and NETWR are reflecting in the screen and in the table EKPO
but when click on Print Priview the values of NETPR and NETWR are printing Zero.
Std Driver prog (SAPFM06P) and Std Form (MEDRUCK) is used .
But when condition types like ZA00 (Discount) the NETPR and NETWR values are populating in the tables and the values are
printing in the Form.
Plz let me know why NETPR and NETWR values are printing Zero for condition types ZB00(value).
Thanks
and Regards

Dear Divya ,
If the values are coming in tables and not in the print, then it will be issue with the fetch used in the smartform.
Take the help of ABAPer and check whether the field taken for print is the same.
Check and revert back.
Thanks & Regards,
Hegal K Charles

Similar Messages

How to Avoid Duplicate Pricing Condition Types In Sales Order and Billing

Hi SAP Gurus
I have a requirement in Pricing (Sales and Distribution). We have issue duplicated condition types in Sales order and it causes wrong posting in to accounts.
I want make them inactive duplicated Condition type in Sales order and Billing Documents.
Please advice me how to make inactive status to duplicated Condition types
Thanks in Advance.
Ravikanth

Hi
You can use Exclusion Group
You can define 2 Groups and include 1 condition type in each
and define exlusion procedure
A   Best condition between condition types
B   Best condition within the condition type
C   Best condition between the two exclusion groups
D   Exclusive
E   Least favorable within the condition type
F   Least favorable betweent the two exclusion groups
you can use Exclusive to set your condition type or as per your requirement
Regards
Jitesh

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

Display Report Level Filter value and Input Controls Value

Hi,
Please let me know how to display Report Level Filter value and Input COntrol values in the report.
I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
For ex: Tab 2 has a Report level filter: Region = NA
I need to display in Tab 1 in as Region: NA
I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
Also how to dispaly the Input Control values in the tab 1.
Please let me know if you have any suggestions for this issue.
Thanks

did you try
=ReportFilter([Year])
if you are making report filter over the year, it will return the value of the filter
by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
good luck

How to get po delivered value and po invoived value?

HI experts,
i need to create bex query with PO total value, PO NET VALUE Item wise, po delivered value,
po still remaining value and po invoiced value.
AFter extensive search i got 0net_po_val for PO net value item wise.
Remaining 4. Fields am unable to search in bw targets. So how to proceed?? Any inputs?
Thanx in advance.
br,
Ravi kiran

Hi Ravi,
Please find the logic for the same:
PO Delivered Value
EKBE (BEWTP = E and SHKZG) SHKZG = S is positive and
SHKZG = H is negative.
PO Still Remaining Value
PO Value- PO Delivered Value
PO Invoiced Value
EKBE(BEWTP = Q and SHKZG) SHKZG = S is positive and
SHKZG = H is negative.

Keep Filter Value and Remove Filter Value

Hi BI/BW Experts
Can anyone explain me the concept of Keep Filter Value and Remove Filter Value in Business Explorer Analyzer and the Web Analyzer with a real time examples?
Thanks
BI Curious

Hi,
Check this links:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/28d5be53706021e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/45/d45cdc487f6f75e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0b532390e96e96e10000000a11466f/frameset.htm
Hope this helps..........
Rgs,
Ravikanth.

Hide values for certain condition types in Quotation Saleorder and Invoice

Hi All,
I have written code to hide values for certain condition types in LV69AFZZ,
this works fine in the ITEM LEVEL.
But for the same condition types, I could not hide the values in the HEADER LEVEL.
Unless I hide it at header level also, this is useless.
Please guide me how to do it.
Thanks & Regards
Pradeep

Hi,
We have been using FORM USEREXIT_FIELD_MODIFICATION of LV69AFZz for item level & FORM USEREXIT_FIELD_MODIFIC_KOPF of LV69AFZZ for hiding heade level conditions.
I hope this helps,
Regards
Raju chiutale.

Condition Type PR00 on materials and the price

Hi,
When I try to create a Sales Order by using VA01, in the item level, I am inputting the material number, quantity and profit center. Then when I select the same line and click on item conditions, automatically, condition type PR00 and the and amount is getting defaulted. However, for certain other materials when I click on item conditions, no condition type PR00 is being picked up. I need to manually input PR00 and the amount.
My question, I would like to know if there is any report available which shows, which materials are automatically defaulted with PR00 and what is the price automatically defaulted. I would also like to know, which are the materials are not automatically defaulted with PR00. (the cases where required to enter manually).
I am looking for any report or query etc.
Thanks in advance.

Adding to Shiva's comments...
The value for PR00 will be determined in the order only if the system could find a valid condition record exisitng. I guess, the condition type PR00 has been configured as...with value 'B - Automatic entry has priority' for the field Manual Entries. You can check the same using Tcode V/06. You are entering the values in the sales order item level for PR00 if the system fails to find a valid condition record. As Shiva mentioned, you can check the existing Condition records using the transaction V/LD for the report '15-Material Price'.
Thanks,
Ravi

Condition type for Retension Money and Down Payment in construction co.

Dear Friends,
In construction co they are using advance payment and retension money from the customer. what condition type I should use for Retension money and for Advance payemnt can I used AZWR (Down Payment condition type).
Kindly help me
Regards
Atul.

Hi Sridhar,
For sure, down payment is a balance sheet item, but you can get it as "expense" under value type 12 in CO.
So in case you have a purchase order, you will get in CO the cost element which is in the purchase order (and in Fi the account for down payment). In case you don't have a purchase order, the down payment will be register in CO under the cost element you enter in OKEP (and in Fi the account for down payment).
As far as I now, you don't get the down payment on cost center, only on internal oder, WBSelement ...
But is there a way to not get the down payment at all in CO (including internal order and WBSelement) ?
Regards.
Benjamin

Condition type Purchase per delivery and per purchase order??

Hi Guru's,
Please advice.
I have 3 questions:
1) Who knows a condition type in a purchase order with the goal that I can
register costs per purchase order item ? Example 10 Euro for a certificate per item?
2) The same but now per purchase order 10 Euro.
3) Is there a condiont type where I can use the number of deliveries as basis?
For example: we get charged 10 Euro per delivery. The total of deliveries are not known during PO creation.
Thank you very much in advance.
Eric
Message was edited by:
eric van zundert

Hi,
1) In this,u r maintain Condition Type,u assign that Condition Type to Pricing Procedure.Pricing Procedure to Accounting view of the Vendor Master Record with the combination of the our Purchasing Organization.
So here the Condition Type ,will be know the Vendor and Our purc.organization.
2) This will be from the Info Record.
3)This one is,u have to use GR-Based-Invoice in the PO.
Thanks & Regards
Suresh.
> Hi Guru's,
>
> Please advice.
>
> I have 3 questions:
>
> 1) Who knows a condition type in a purchase order
> with the goal that I can
> register costs per purchase order item ? Example 10
> Euro for a certificate per item?
>
> 2) The same but now per purchase order 10 Euro.
>
> 3) Is there a condiont type where I can use the
> number of deliveries as basis?
> For example: we get charged 10 Euro per delivery. The
> total of deliveries are not known during PO
> creation.
>
> Thank you very much in advance.
>
> Eric
>
> Message was edited by:
> eric van zundert

Condition types in Taxes, MM and SD

Hi Experts,
There are different kinds of condition types For Taxes( t.code obq1), MM (m/06) and SD( v/06). how are these condition types are useful. please explain the difference among these condition types.
Regards,
babu

Hi Babu,
         Vendor purchasing price is made up of with differenct pricing elements. Ex . Material basic prices , freight charges , discount etc. To reprsent each element different condition types are used in MM pricing procedure.
         In the similar manner for Finishe goods selling prices is made up of diffeent price elements. Ex. Finished goods basic price , frieght charges, discoutn etc , To reprsent each element different condition types are used in SD pricing procedure.
          The total tax amont also is made up of with diffrent tax elements or different taxes are there. Ex input tax , out put tax , basic tax , surcharge , education cess etc. To represent these taxes various condition types are used in Tax procedure..
Hope its clear........
Regds
Chandra

ALV: How do I suppress repeating values and page breaks on printed output?

Good day, everyone!
First, I've done a LOT of searching trying to find the answer to my question, but I'm not finding an answer. If this has already been answered and you can point me to a URL, I would appreciate it.
Here's my issue: I have a rather simple ALV report. It has the columns of Person ID, Personnel Number, For Period, In Period, and Amount. I sort by Person ID and Personnel Number, and if the value repeats on the next line of the report, I want to suppress it (make it blank).
I thought the answer was in the following code, where I set the GROUP attribute to asterisk:
CLEAR sortcat_ln.
sortcat_ln-spos      = '1'.
sortcat_ln-fieldname = 'PERSONID_EXT'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
sortcat_ln-spos      = '2'.
sortcat_ln-fieldname = 'PERNR'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
It looks PERFECT on the screen -- the values are suppressed if they repeat, and everything appears together on one screen. However, when I print the report, two things happen: 1) The values repeat on each row, even if they are the same, and 2) I get a page break after each Person ID / Personnel Number combination.
I now realize that I can't use the GROUP attribute. Is there some other way in ALV to blank these repeating values and keep all the rows together on one page, rather than page breaking after each value change?
Thanks!
Dave

Hi
Same requirement i had before, when i try to print preview. the output of the grid display is in grouping is ok, but when i print preview or print it doesnt cater the grouping and page breaks, so what i did i modify the internal table use in alv , after hitting the print preview/print with the format desired by the user. you can do that in user-command. see code below
FORM user_command USING r_ucomm TYPE syucomm
                        rs_selfield TYPE slis_selfield.
DATA lt_sort TYPE lvc_t_sort.
CASE r_ucomm.
    WHEN '&RNT_PREV' OR '&RNT'.
      t_final_x[] = t_final[].
      PERFORM clear_redundant.
      PERFORM set_sort_criteria USING lt_sort.
    WHEN '&F03' OR '&PRINT_BACK_PREVIEW'.
      t_final[] = t_final_x[].
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
hope it helps

How to create a display value and a return value for an item

Hi! I have an item on a form. I want the default value for my item to be :":APP_USER", but the return value, to be the id of my user. I tried to create a PL/SQL Expression for the default item, but it doesn't work. What do I miss?
It should be something like this, but it's not.
begin
select first_name || ',' ||last_name as "Employee",
id_employee -- display value,return value
from employees
where id_employee = :APP_USER;
end;
Does anyone know?
Thanks!
Vitaly

Hi VItaly,
Display value and return value concept applies very well in case of a Combo box if i am correct, I don't know what type of item is your's.
But any way, you can have a workaround like,
Create a hidden item such that it's default value should be ID of the user which can be get from db by using :APP_USER.
Use the this item for your references.
I think this will meet your requirement.
Thanks
Kumaraswamy.

Retrieve data from a text file, incrementing the last value and save new value below

Hi
This was working initially. It is part of my LabView Project. I was trying to create a unique number that increments every time the adds the value to the list. It works on computer perfectly. But when I put this on a PDA, it seems to create a blank space when reading the contents of the text file after the last value, which means 0 + 1, which is not what I want.
Please run the testUniqueNoOnPDA.vi first and change the path to C:\uniqueNumber.txt and save the uniqueNumber.txt file to your C drive and see What I am trying to do. Click the Enter button to increment.
Why does the PDA create a blank space after the last value and a computer does not?
I was working perfectly all week and it is not working well now.
Help please, I think I'm missing something
Attachments:
uniqueNumber.txt ‏1 KB
testUniqueNoOnPDA.vi ‏33 KB
testUniqueNoOnPDA.lvproj ‏4 KB

It works perfectly, it was a hardware problem. It depends on what PDA I used.

Rebate agreement-Difference coming for credit note value and drill down value .

Hello Friends,
In 2013 we had created one rebate for which the validity period was 1st April 2013 to 31st March 2014 . At the end of each month, rebate amount was settled by raising credit note to the customer . Now at the end of March'14 during final settlement, a credit note was raised to the customer . The issue here is there is difference of 1.13 (Pounds) between credit note value and the drill down value for March'14 . Lets say our credit note value is-100 (Pounds)and Drill down value for the month March'14 is 101.13 Pounds. We are not able to find out why this difference is coming . Please let me know your inputs on this .
Regards,
Sandeep G.

Sandeep -
During final settlement of a rebate agreement, it calculates rebate amout for the the entire time period less payments already made to a customer and then issues a credit memo request based on that.Please check all the the invoices created during entire period and check accrual calculation.It should match.
You can check VBOX table to get billing documents for the entire period.
Let us know if you still have an issue.
Thanks & Regards
Amit Gupta

PO : Condition type ZB00/RB00 (Value) and NETPR NETWR value printing Zero

Similar Messages

Maybe you are looking for