Condition type Purchase per delivery and per purchase order??

Hi Guru's,
Please advice.
I have 3 questions:
1) Who knows a condition type in a purchase order with the goal that I can
register costs per purchase order item ? Example 10 Euro for a certificate per item?
2) The same but now per purchase order 10 Euro.
3) Is there a condiont type where I can use the number of deliveries as basis?
For example: we get charged 10 Euro per delivery. The total of deliveries are not known during PO creation.
Thank you very much in advance.
Eric
Message was edited by:
        eric van zundert

Hi,
1) In this,u r maintain Condition Type,u assign that Condition Type to Pricing Procedure.Pricing Procedure to Accounting view of the Vendor Master Record with the combination of the our Purchasing Organization.
So here the Condition Type ,will be know the Vendor and Our purc.organization.
2) This will be from the Info Record.
3)This one is,u have to use GR-Based-Invoice in the PO.
Thanks & Regards
Suresh.
> Hi Guru's,
>
> Please advice.
>
> I have 3 questions:
>
> 1) Who knows a condition type in a purchase order
> with the goal that I can
> register costs per purchase order item ? Example 10
> Euro for a certificate per item?
>
> 2) The same but now per purchase order 10 Euro.
>
> 3) Is there a condiont type where I can use the
> number of deliveries as basis?
> For example: we get charged 10 Euro per delivery. The
> total of deliveries are not known during PO
> creation.
>
> Thank you very much in advance.
>
> Eric
>
> Message was edited by:
>         eric van zundert

Similar Messages

  • Condition Types appearing two times in a Purchase Order

    Hi,
    The condition types are same in supplementary schema (for Info Record) and Purchase Order Calculation Schema. When I put some value against a condition type under conditions in Info Record then that condition type appears 2 times in the purchase order. It seems the condition type appears 1st time (with value from Info Record) because it is picked from Info Record and 2nd time (with no value) from the Purchase Order Calculation Schema.
    The requirement is condition type should appear only single time in PO (by default) with or without value in spite of having info record. In case some value is maintained in Info Record then the condition type should appear with value but in a single line in PO which can be edited if required. There should not be second line of same condition type by default in PO.
    Can anyone provide some idea to resolve this?
    Thanks in advance

    There is only 1 condition line (apart from PB00), which comes 2 times in PO by default, in MEK2 and also one condition line (one line was deleted and then saved) in last PO (from the Info Record). But the condition type still comes 2 times while creating a new PO.
    Please provide some more answer to resolve this issue.
    Thanks in advance

  • Condition types in Taxes, MM and SD

    Hi Experts,
    There are different kinds of condition types For Taxes( t.code obq1), MM (m/06) and SD( v/06). how are these condition types are useful. please explain the difference among these condition types.
    Regards,
    babu

    Hi Babu,
             Vendor purchasing price is made up of with differenct pricing elements. Ex . Material basic prices , freight charges , discount etc. To reprsent each element different condition types are used in MM pricing procedure.
             In the similar manner for Finishe goods selling prices is made up of diffeent price elements. Ex. Finished goods basic price , frieght charges, discoutn etc , To reprsent each element different condition types are used in SD pricing procedure.
              The total tax amont also is made up of with diffrent tax elements or different taxes are there. Ex input tax , out put tax , basic tax , surcharge , education cess etc. To represent these taxes various condition types are used in Tax procedure..
    Hope its clear........
    Regds
    Chandra

  • VA00 condition type not getting determined for the returns order

    Hi All,
    I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
    When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
    Note:VA00 condition type is getting deleted from the  internal table tkomv[].
    If any one came across  this scenario can you please help me.
    Request your valuable inputs

    Hi,
    Please check the copy control setting in VTAA.
    Maintain the pricing type as "D" at item category level for the respective document type .
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Conditions type of category "Delivery Costs"(B) donu00B4t allow negative values

    Hello,
    I would like to know if it is possible to munipulate a condition type with category "B" Delivery costs in such a way that it allows a negative entry in the Purchase Order.
    Estandard SAP does not allow it. Message: 06259 "Negative Delivery costs are not allowed".
    If the above is not possible, can anyone tell me how a can manipulate a Discount (fixed amount) in such a way that it not only points at a particlar account (accruels indicator does this job) upon MIGO, but also apears as a line-item upon receiving the invoice (MIRO). As far as I know, only Planned delivery costs can do this job. But they do not allow negative values!
    If anyone has encountered a similar task, please tell me how they solved it.
    Thanks,
    Aart

    Hello Guys,
    The scenario isas follows.
    When one buys fuel, in Chile  one has to pay fuel especific Taxes.
    Version especific config does not resolve this because we need the tax in amount (value) not in percentage.
    In our system we resolved this by creating a material "Fuel especific Taxes" which points at a tax-account  with a special tax-indicator.
    So far so good.
    Now the government implemented a second fuel tax - "Fuel tax variable" which we might resolve in the same way, but the problem is this tax might be negative(!).
    We cannot create a material with a "negative value" in our Purchase Order and discount conditions have inmediate efect on the material costs in the PO.
    The ideal would be incorporate a condition type in the PO which upon invoicing (MIRO) shows up with the tax account (and a possible negative value!
    The model we have developed upto now is using the tabpage "GeneralAccount" in the MIRO but in this model we have to indicate the account ourselves. The system does not propose it.
    Thats why I thought of the "Planned Delivery costs" option.
    Hope this clarifies a bit more the case we have.
    Thanks for any feedback
    Aart

  • PO : Condition type ZB00/RB00 (Value) and NETPR NETWR value printing Zero

    Hi Experts,
    I have created a Purchase Order line Item having the condition type ZB00(Value)
    the values of NETPR and NETWR are reflecting in the screen and in the table EKPO
    but when click on Print Priview the values of NETPR and NETWR are printing Zero.
    Std Driver prog (SAPFM06P) and Std Form (MEDRUCK) is used .
    But when condition types like ZA00 (Discount) the NETPR and NETWR values are populating in the tables and the values are
    printing in the Form.
    Plz let me know why NETPR and NETWR values are printing Zero for condition types ZB00(value).
    Thanks
    and Regards

    Dear Divya ,
    If the values are coming in tables and not in the print, then it will be issue with the fetch used in the smartform.
    Take the help of ABAPer and check whether the field taken for print is the same.
    Check and revert back.
    Thanks & Regards,
    Hegal K Charles

  • Condition type for Retension Money  and Down Payment in construction co.

    Dear Friends,
    In construction co they are using advance payment and retension money from the customer. what condition type I should use for Retension money and for Advance payemnt can I used AZWR (Down Payment condition type).
    Kindly help me
    Regards
    Atul.

    Hi Sridhar,
    For sure, down payment is a balance sheet item, but you can get it as "expense" under value type 12 in CO.
    So in case you have a purchase order, you will get in CO the cost element which is in the purchase order (and in Fi the account for down payment). In case you don't have a purchase order, the down payment will be register in CO under the cost element you enter in OKEP (and in Fi the account for down payment).
    As far as I now, you don't get the down payment on cost center, only on internal oder, WBSelement ...
    But is there a way to not get the down payment at all in CO (including internal order and WBSelement) ?
    Regards.
    Benjamin

  • Condition Type PR00 on materials and the price

    Hi,
    When I try to create a Sales Order by using VA01, in the item level, I am inputting the material number, quantity and profit center. Then when I select the same line and click on item conditions, automatically, condition type PR00 and the and amount is getting defaulted. However, for certain other materials when I click on item conditions, no condition type PR00 is being picked up. I need to manually input PR00 and the amount.
    My question, I would like to know if there is any report available which shows, which materials are automatically defaulted with PR00 and what is the price automatically defaulted. I would also like to know, which are the materials are not automatically defaulted with PR00. (the cases where required to enter manually).
    I am looking for any report or query etc.
    Thanks in advance.

    Adding to Shiva's comments...
    The value for PR00 will be determined in the order only if the system could find a valid condition record exisitng. I guess, the condition type PR00 has been configured as...with value 'B - Automatic entry has priority' for the field Manual Entries. You can check the same using Tcode V/06. You are entering the values in the sales order item level for PR00 if the system fails to find a valid condition record. As Shiva mentioned, you can check the existing Condition records using the transaction V/LD for the report '15-Material Price'.
    Thanks,
    Ravi

  • Hide values for certain condition types in Quotation Saleorder and Invoice

    Hi All,
    I have written code to hide values for certain condition types in LV69AFZZ,
    this works fine in the ITEM LEVEL.
    But for the same condition types, I could not hide the values in the HEADER LEVEL.
    Unless I hide it at header level also, this is useless.
    Please guide me how to do it.
    Thanks & Regards
    Pradeep

    Hi,
    We have been using FORM USEREXIT_FIELD_MODIFICATION of LV69AFZz for item level & FORM USEREXIT_FIELD_MODIFIC_KOPF of LV69AFZZ for hiding heade level conditions.
    I hope this helps,
    Regards
    Raju chiutale.

  • Changing the Condition value in Quatation only and not in Order

    Hi Gurus,
    We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
    Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

    Hi
    You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
    IF VBAK-AUART = (Your quotation type)
    LOOP AT XKOMV.
    IF XKOMV-KSCHL = 'PR00'.
    SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
    READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
    I_T685A-KMANU = 'C'.
    MODIFY I_T685A INDEX SY-TABIX.
    MODIFY T685A FROM TABLE I_T685A.
    REFRESH I_T685A.
    ENDIF.
    ENDLOOP.
    like this discuss with your abapper and build the logic
    regards
    Prashanth

  • ZPRS- Cost(data source H) condition type is not visible in CRM sales order

    Hi Colleagues,
    I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
    But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
    Can any body help me in this issue.
    Tanks and Best Regards,
    Rajeswari

    Hi Michael ,
    Thank you very much for your answer. I just require one more confirmation from you.
    Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
    Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
    Could you please confirm it.
    Thanks in advance for your help.
    Best Regards,
    Rajeswari

  • How to change condition type data on header of a sales order

    Hi Guys,
        I have a requirement, where i want to change the value of particular condition type at header lever of sales order.
    How to do it.If i am not wrong , this can be achived by CRM ORDER MAINATAIN .But how to do it i dont know.
    So please help me for this requirement
    Regards
    PG

    Hi PG,
    Can you please let me know if you were able to do this. I have a similar requirement where in I need to change the value of a condition type.
    I am new to CRM , so it will be great if you can please explain me the steps.
    Thanks in advance.
    Regards,
    Vivek

  • Condition type (PR00)is not trigger in sale order

    hi
      i have maintained the condition record for the material .but the sale order , the contion type is not trigger in the sale order
    where i made the mistake ,,,
    with regards
    dinesh

    Hello
    In your sales order, do a pricing analysis.
    To do this Sales Order - Item - Condition - "Analysis" Button.
    This will give you fair idea, why condition record is not getting determined in sales order.
    Refer the link for example - [what to look in in Pricing Analysis|https://docs.google.com/leaf?id=0B-5wCmYJ-6dlMTY1Yjg1NzUtM2I5MC00MjUzLTg3ZDctY2M3NTBkZDdiMmE5&sort=name&layout=list&num=50]
    Thanks & Regards
    JP

  • Tables for delivery and stock transport orders

    Hi Members,
    I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
    I don't know which tables these quantities sit into.
    If you know please help.
    Points will be suitably rewarded.
    Reagrds,
    Boby

    >
    Boby wrote:
    > Hi Members,
    >
    > I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
    > I don't know which tables these quantities sit into.
    > If you know please help.
    > Points will be suitably rewarded.
    >
    > Reagrds,
    > Boby
    if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
    for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

  • Print document type Q02( technical delivery terms)  with Purchase Order

    Hi all
    1) I have activated the QM procurement for a certain material and I have assigned the control key that makes mandatory the technical delivery terms on the material master (standard control key 0002).
    2) I have created a Document Info Record Q02 to hold the Technical Delivery Terms assigning a PDF file. Document is released.
    3) I have assigned the DIR to the material master (object link in the DIR).
    I would like to know how to print the this DIR with Purchase Order. I am testing this scenario in IDES system and the form does not get printed.
    Could anyone please advice how to get the PDF file printed with the purchase order?
    Thank you

    Hi Sappmqm,
    There is no internal way, you would have to create an ABAP program to handle this function, where it would search the material record to pull the DIRs linked and then open them on user's screen for printing.
    Additional SAP add-ons are available as 3rd party apps, can click my name and contact me for more detail if you like.
    Good luck.

Maybe you are looking for