PO created through ME59N although PR was not released

Hi,
We've had some PR's get converted to POs through ME59N. The issue is that the PRs were never released.
Has anyone seen this before?
Thanks,
` Chris

That means your release strategy is not defined properly
1) you should check what is the release indicator config
2) your release strategy may not have Blocked release indicator
so it may have any thing...
send me your contact will help you out.

Similar Messages

CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key

Hi Experts,
    We are facing following problem in our ESS/MSS system. Request to suggest solution ASAP.
We are having EP7 and ECC6
*CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE*
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressIN.readRecord(FcPerAddressIN.java:270)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressIN.readRecord(InternalFcPerAddressIN.java:545)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressINInterface.readRecord(FcPerAddressINInterface.java:150)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface.readRecord(InternalFcPerAddressINInterface.java:201)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface$External.readRecord(InternalFcPerAddressINInterface.java:277)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverview.onBeforeOutput(VcPerAddressINOverview.java:267)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverview.onBeforeOutput(InternalVcPerAddressINOverview.java:250)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverviewInterface.onBeforeOutput(VcPerAddressINOverviewInterface.java:158)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:140)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface$External.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:224)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.per.in.address.model.HRXSS_PER_P0006_IN.hrxss_Per_Read_P0006_In(HRXSS_PER_P0006_IN.java:218)
     at com.sap.xss.hr.per.in.address.model.Hrxss_Per_Read_P0006_In_Input.doExecute(Hrxss_Per_Read_P0006_In_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 61 more
Edited by: KISHOR PONKSHE on Nov 7, 2011 11:37 AM

Hello Kishore,
Please remove the entry from the table V_T582ITVCLAS related to CL_HRPA_INFOTYPE_0006_IN
Then check.
Best Regards,
Deepak.

I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore.

I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore. PLEASE HELP

I did restore my phone last week, it went well. Today, i turned my phone off and turn it back on, now it is stuck in itunes logo and i was thinking that it needs a restore again. Once i tried restoring it, it finishes the "Extracting iPhone Software" part, but after that the error appears. PLEASE HELP ME

F110 APP run - Payment run has been scheduled, but job was not released

Dear Friends,
We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
But when we selected payment run, immediately it showed the below status:
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Also I'm not able to delete the Payment run made, fields are in disabled mode.
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

Dear Supriya,
Thanks a lot for your immediate response.
Still the same problem is existing even after one and half hours.
ie.,
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
Thanks again.
Regards,
Dwarak.

Proposal has been sheduled, job was not released

Dear Fi Experts,
In F110- Automatic payment process, while creating proposal the system throwing error
Proposal has been shedulded 03.03.11 10:06:27
Job was not released
Parameters maintained in the prosal is correct, payment method, vendor balance and additional log
while saving the prosal system throwing the error. Same i tried in the quality server its working fine.
Can you explain why it happens?
Thanks and Regards
J.Francis

Hi J. Francis,
It can be some authorization issue, I recommend you to check this with your basis team.
Also check these authorization objects:
S_CTS_ADMI
S_BTCH_ADM
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

Purchased song to create ringtone that after purchase, was not an option!

I purchased a song on iTunes specifically to create a ringtone, but when I tried to do this, it said "this song can no longer be made into a ringtone". Can they not tell you this before you purchase the song?? When I went back to the iTune store to find resolution, it said you had to click on view options to see a "bell" next to the song indicating it can be made into a ringtone. The "view options" was not "highlighted" for me to choose this option!
I bought 2 songs that can not be made into ringtones......is there another option??

Yes. You must install anti virus software in Windows. Microsoft has a free good anti virus program for download. It is Security Essentials and is available on the microsoft site.

F110 - Job was not released

Hi All,
While running F110 we got the below message:
<i>Parameters have been entered
Proposal have been schedule 03/28/2007 14:22:28
Job was not realeased.</i>
Please let me know the cause of this error.

Hi,
Delete the proposal and schedule it again.
Murali.

Why does the Mail.app CC: field puts me first on the CC: list although I was not ?

Why does the Mail.app CC: field always rearranges the list so I am first on the CC: list although the sender intentionally did not ?
I did not see how and where to de-activate this unnecessary intrusion in the company's communication codes.
iOS on my iphone, correctly leaves my name where it is in the CC: list.

Hi starbux48,
Yahoo! partnered with Apple to allow an IMAP style offering on the iPhone, free of charge for their users. However that feature is only available if you use the iPhone. If you want IMAP/POP access on computers then you'd need to upgrade to the Plus level account.

HT1212 What is the IPad was not synched to a computer and is disabled?

We had a student that entered a passcode incorrectly and disabled the iPad. However, this iPad was set-up through wi-fi and was not synched to a computer. How do we re=enable the iPad?

You will still need to connect it to a computer's iTunes - from http://support.apple.com/kb/HT1212
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may need to put the iPad into recovery mode in order to reset/unlock it : http://support.apple.com/kb/ht1808

Orders created through EDI

Hi,
The issue is -
Additional value date (Say 30 days) is getting updated in sales order at Header level billing view.
when order is created manualy that field is updated correctly,
but when order created through EDI that field is not getting updated.
what can be the reason for this ?
How to resolve such type of problem and what all things we need to check?
regards,
Anup

hi,
Thnx for the reply
the field is VBKD - VALTG.
regards,
anup

My agreed $35/month deal was not honored, 1 month after installation.

I've been a loyal Verizon customer for the past 10+ years. I've had Verizon High Speed (1mbps) during that time. For the past year, I have been receiving countless letters and ads asking for me to upgrade to FiOS internet, since much of my neighborhood had made the transition. I was told that the cost of maintaining the old lines was significant for the company. I had been receiving deals from anywhere between $35-$45/month for both FiOS internet+Digital Voice. I finally agreed to upgrade in June. I called customer service and requested to simultaneously upgrade to FiOS 25/25mbps (internet only), as well as cancel my phone service, seeing as how I wasn't using the landline much (nor did I want the multiple associated taxes). After discussing with the rep, who was a very friendly gentleman, he managed to activate enough discounts to bring it down to a total bill of $34.99/month, with no other fees/taxes. This was a verbal agreement. Although I was not emailed an invoice, I called back shortly after to confirm the price. A week later, I had the FiOS installed and the phone line disconnected. Everything worked perfectly, and I was getting a solid 25/25 up/down at all hours. Later on in July, I received a surprising $130 bill. Details showed that my FiOS internet was not $34.99, but rather $74.99 which was basically a full sticker price. I called back, and after multiple attempts, I was able to reach the person in charge of my case. She told me that my agreed price was invalid, because the moment that I decided to cancel my landline, I had lost all discounts that brought my price down to $34.99/month. She had even admitted that this issue was not foreseen, and that there was nothing else she could do for me, other than fix my first bill. I am very frustrated, because I only decided to upgrade because of this attractive deal that Verizon had offered me. I cannot handle $74.99/month, nor would I have ever agreed to this price. Can they even legally charge me a price that I never agreed to? Can someone point to me how I should proceed this issue?

Hi vhn0,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Billing Document Not releasing to Accounting because of Condition Type

Hi,
We have used Sales Condition Type ZSCM(Which is a statistical condition type) in Billing Documents and they are already released to Accounting.Today we have created one more Billing Document with same Condition type ZSCM.But this billing document is not getting released to Accounting?
What could be the reason? Why it was released to Accounting before with the same condition type ZSCM and why it is not getting released to Accounting this time.
I am breaking my head to find the possible reasons...kindly help me out to find the problem.
1.Billing document 90005889 - has value 64.48462- and It has only 2 Items and it was released to accounting
2.Billing document 90005729 - has value 217.87960- and It has only 21 Items and it was not released to accounting and asking to activate +/- sing in KE4I transaction for the ZSCM condition type.
Why billing document 90005889 is released for accounting and why 90005729 was not released to accounting?
Thanks
Supriya

Hi,
There can be following possible reasons fo the samed :
1. If the specific GL account is not getting any assignment to CO object.
2. Also you need to check assignment with VKOA that whichever GL is assigned as per business process of Sales (the account which is going to be credited) and all relevant settings in VKOA.
3. Pls check all substitutions and validations if any connected with that condition type and GL. Becuase sometimes it may happen that because of calling some other application (for ex. Set or substitution as generally transportation of this element happen with entire hierarchy if you add your substition in the node.) at he time of posting of billing document. This has already happen with our business scenario.
4. Also check if this sales revenue GL is assinged to any set and if that set is called through any substitution ot validation.
Pls check all these possibilities and revert.
Thanks & Regards,
Taral Patel

Temp CLOB tablespace not released - Returning CLOB from SP

I'm trying to call a stored procedure from a .NET application that returns a CLOB as an OUT parameter. The problem that we are experiencing the tablespace allocation from the temporary clob created in the stored procedure is not released after the stored procedure is finished executing. Here is an extract of the code we use to create the CLOB
DBMS_LOB.createTemporary(TempCLOB, FALSE, DBMS_LOB.CALL);
XMLDOM.writeToClob(xmlDocumentNode, TempCLOB); --write the xml results to the clob
Then the TempCLOB is returned to .NET as an OUT parameter. After the procedure is executed the lob locators in v$temporary_lobs rise by one for each execution of the stored procedure. We've tried using DBMS_LOB.freetemporary(TempCLOB) but the CLOB variable is returned to .NET as null.
Anyone have any ideas of how to properly dispose of the temp CLOB?

> Anyone have any ideas of how to properly dispose of the temp CLOB?
Using DBMS_LOB.FreeTemporary() after the temp CLOB has been used..
Have the .NET client call this PL/SQL API call when it is done with the CLOB. Remember that what is passed to the .NET client is a pointer to the temp CLOB - not the temp CLOB itself. Therefore if you release the CLOB and then pass the pointer to the client, that pointer refers to nothing.
The client uses this pointer to access bits and pieces of the CLOB (in temp space on the Oracle Server). When the client is done, it is only good manners on the client's part to inform the server that it is done with that server resource and that it can be released.
Ditto with ref cursors.

Oracle select for update: not releasing lock

My JDBC code uses "select for update" to modify record in Oracle database. I tried to simulate network connection down situation.
After my JDBC code locked on a record using "select for update", I unplugged the network cable. I then tried to run the same code on another computer, but it could not accquire the lock, because the previous lock was not released. I tried sqlplus to lock the record, but failed also. The lock has been there for at least an hour now. I guess it may finally be released, but is there a way for oracle to release the lock as soon as the connection is down? Not know if it is a JDBC setting or oracle setting.

Dear Friend,
What you are trying to do is not correct way of checking the concurrency and transaction.
The reason is as listed below.
01.Always remember http is a stateless protocol and removing the connection or just closing the browser will never be informed to the database or to the application server thus the transaction monitor (TM)or processor will never release the lock as it will deem that the actor is manipulating the data.
02.As per locking goes every database is having a �TM� and the default isolation level setting is different like oracle uses serializable DB2udb 7.0 or db2/As400 uses repeatable read. You can change this setting by editing the default setting in the database but be very sure before touching it.
03. You can also transpose this with your Application server setting for that piece of code or Globally but again be very sure about it as it will change the entire gamete.
04. For releasing lock you have to manually do it or you can change the settings of App server or the Database to release the connection after some wait time.
Regards,
Ruchir

LIBOVD ERROR - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

Hello everyone,
I have the following scenario:
We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
<Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
ORABPEL-30511
When that error ocurred, no one was able to use the system (BPM/Human Workflow).
I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
connection to ldap://[10.200.10.57]:7001 as cn=Admin.
javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
[2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.> validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
Also, I only got this error in the "diagnostic.log".
Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
Thanks in advance!

I have moved your thread from Certification to SOA Suite to get proper assistance.
Thanks,
Lisa

PO created through ME59N although PR was not released

Similar Messages

Maybe you are looking for