Proposal has been sheduled, job was not released

Dear Fi Experts,
In F110- Automatic payment process, while creating proposal the system throwing error
Proposal has been shedulded 03.03.11 10:06:27
Job was not released
Parameters maintained in the prosal is correct, payment method, vendor balance and additional log
while saving the prosal system throwing the error. Same i tried in the quality server its working fine.
Can you explain why it happens?
Thanks and Regards
J.Francis

Hi J. Francis,
It can be some authorization issue, I recommend you to check this with your basis team.
Also check these authorization objects:
S_CTS_ADMI
S_BTCH_ADM
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

Similar Messages

F110 APP run - Payment run has been scheduled, but job was not released

Dear Friends,
We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
But when we selected payment run, immediately it showed the below status:
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Also I'm not able to delete the Payment run made, fields are in disabled mode.
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

Dear Supriya,
Thanks a lot for your immediate response.
Still the same problem is existing even after one and half hours.
ie.,
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
Thanks again.
Regards,
Dwarak.

F110 - Job was not released

Hi All,
While running F110 we got the below message:
<i>Parameters have been entered
Proposal have been schedule 03/28/2007 14:22:28
Job was not realeased.</i>
Please let me know the cause of this error.

Hi,
Delete the proposal and schedule it again.
Murali.

Running F110 with message "Proposal has been released 07/22/10 06:42:33"

Dear experts,
When I made proposal through F110, it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
What could be the reason?
Thank you!

In the first tab of your F110 screen, you'll get the status of your processing. It will update for each event. Check if you are getting things like the following.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been carried out
Posting orders: 1 generated, 1 completed
If you are not getting any of the above, you can check that step and analyse the log.
Since you are getting as released, i think the proposal run has not carried out.
Ravi.

HT203172 Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. When I repaired "disk permission", this message was what came up. What does this mean, and how can

Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired. When I repaired "disk permission", this message was what came up. What does this mean, and how can I fix it?
The opperating system I am using is 10.7.4, and updating to the latest version currently. Computer is running fine, except that when I did some utility repairs, I got the warning above, and not really sure what do, in regards to repairing it correctly, not just getting the message off of my computer.
Thank you for your help, and please only contribute if you know about this issue please.

That's a status message which can be safely ignored.
(70090)

Object has been disconnected or does not exist at the server

Hi,
I have a report which had run daily without any problem for months. Now it stops after quite a lot of time with error: 'object .rem has been disconnected or does not exist at the server'.
I have checked the dataset queries and the parameters, and everything is fine. I changed the timeout for the report as well, but it did not help either. I don't use a hidden object.
Could anyone tell me what's happening?
Many thanks.
P.

I'm using 2008. I had thought the bug was fixed in it during the past 4.5 years.
And what is a 'bad default'? And how come that the report worked for a long time without problems? If it is a known bug, it should have prevented proper running from the beginning.
Hi Pelso,
This issue has been fixed in SSRS 2008R2. If you need to fix this issue in a previous release of Reporting Services, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com),
so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

The SSP Timer Job Distribution List Import Job was not run.

The SSP Timer Job Distribution List Import Job was not run. Reason: Logon failure: the user has not been granted the requested logon type at this computer
We are facing the above mentioned problem . I have added the service account in backup operates and did everything like update farm credentils , update managed account etc , but still no luck . Please note that we haven't done any chnages to the account
Application pool is keeping going into stop mode when we try to access the site . Both CA and webapplication are down with the error as Service Unavailble . Please help
Srini

sounds like the account can only be used on certain COMPUTERS ("has not been granted the requested logon type
at this computer")... check active directory.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.

It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

Hello,
To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
If we see the maually the log report for FFID then below error message is displayed.
" BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
Can anyone guide me to solve the issue.
Thanks in advance.
Best Regards,
Prashant Dubey

Hi,
once chk the status of the job by selecting that and check job status(cltr+shift_f12)
since it was periodically scheduled job there will be a RELEASED job after every active job..
so try to copy that into another job using copy option and give some new name which u have to remember...
the moment u copy u can find the same copied job in SCHEDULED status...
from here, try to run it again on hourly basis....
After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
rgds,

Jobs are not released

Hello Guys ,
STandard jobs are not released .can u please tell me the reasond???

Hi
Is this a new system or a copied system? Generally this happens in a copied system since the default server group still has the source system information and hence jobs will not run. Goto Txn SM61 and look for Job group. In the default list, you should see your server instance name. If it is showing any other name, just delete the entry and add the current instance to the list.
Hope it helps
Javed
Edited by: Javed Sapstar on Dec 27, 2010 9:41 AM

Hi. Recently my iPad has been stolen I was wondering if I could give you the cereal code and try locate it or if you can wipe it or block it permanently so it cannot be used

Hi. Recently my iPad has been stolen I was wondering if I could give you the serial code and try locate it or if you can wipe it or block it permanently so it cannot be used

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
Unless you had Find My iPad enabled on it then there isn't any way to locate it. If you did have it enabled then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it (as your tagline shows iOS 7 then it should be harder to remove from your account).
You've reported it to the police ? You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model then you should also contact your carrier.

Warning: SUID file "System/Library/CoreServices" has been modified and will not be repaired.

Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
<Subject Edited by Host>

I know this question has been sort of answered but not properly in my opinion.
There should be no permissions to repair once they have been repaired.
There should also be no permissions that can't be fixed especailly by Apple.
Many computers have seen this:
"System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAge nt" has been modified and will not be repaired."
To me this is not normal even though Apple may say it is.
Not all computers have this so why do some other computers show this problem?
I have fixed this on my computers as I can't stand to have things like this show up when they shouldn't.
I replaced the problematic ArdAgent by using a copy from another computer that did not have that warning.
Once, replaced, I got the message in Disk Utility when I repaired the permissions with this new one:
Permissions differ for:
System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgen t
should be "0" instead of 501 (or something like this)
Then it states those permissions were repaired.
Now I no longer get that stupid warning about the ARDAgent.
For those of you that want to get rid of that warning, try using a copy from another computer running the same system.
Worked for me.
I also repaired a few other permissions that always kept coming back even though Disk Utility said they were repaired.
Hogwash.
If it was repaired then the same exact ones wouldn't be coming back everytime you repair permissions.
In my mind, there should be no permissions to repair once they have been repaired.
Otherwise, they were not fixed or repaired in the first place.
I now no longer have any permissions to repair unless I may install something new that might need repair.
Good luck with your mileage.
This is how Disk Utility should look like without any permissions to repair once you have repaired them one time, and one time, only.
Clean bill of health.

Repair Permissions: "has been modified and will not be repaired" message.

After running repair disk permissions, several messages have a statement after it that SUID file .... "has been modified and will not be repaired.
Ones that show this message are:
system/library/filesystems/appleshare/afpload
usr/bin/setregion
system/library/privateframeworks/install.framework/versions/A/resources/runner
Should I be concerned with these specific files? How should I deal with this. Thanks so much for any advice or help.
Skip

William --
It is a common situation with many threads about that here.
Those suid notations should not concern you at all.
I wish they were invisible.
EDIT:
Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=8846411&#8846411
Message was edited by: ~Bee

I upgraded iMac to Mountain Lion, and not get:Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

I upgraded to Mountain lion yesterday. Today I installed a couple of unrelated apps (DaisyDisk, CCleaner) and now when I try to verify/repair permissions I get this:
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
Any idea what's going on? I know that this message sometimes is meaningless, but it bugs me. LOL Any help?

It is meaningless. Do ignore it. Take a look at this. https://support.apple.com/kb/TS1448?locale=da_DK
Message was edited by: hpr3

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Proposal has been sheduled, job was not released

Similar Messages

Maybe you are looking for