PO Notification Summry Error

Hi
In PO Noitification Summary, we are getting following error .
' Document Manager Failed with Error Number 3 while processing Standard Purchase Order < PO Number > '
Actually PO is in APPROVED stage.
Now if I want to remove this message from PO Notification Summary , how it will possible ?
Can anyone help me ?
regards
SD

Hi Sandeep..
You are requested to explain in some details. It will helpful to me to take an action.
Thanks
SD

Similar Messages

Notification result error: 3138 #NORESULT

Hi all!
I get this error, when I choose a result for a notification at the admin site and try to submit it:
3138: Action cannot be performed on this notification: #NORESULT
The notification activity has a result type with five result codes driven into different activities.
The message has the same result type as the notification activity.
I also tried calling this:
Wf_Notification.SetAttrText(nid => 82,
aname => 'RESULT',
avalue => 'TEST5');
Wf_Notification.Respond(nid => 82,
respond_comment => 'bla',
responder => 'OWF_MGR');
It gave the same error at Respond.
What does this error mean? How can I solve this problem?
Thanks in advance.

try increasing it to 250 and try again.
Item type has a max length of 8 and item key has a max > length of 240.Shame on me. :) I corrected, but the error message remains.
Error: 3138: Action cannot be performed on this notification: #NORESULT
Error Stack:
Wf_Engine_Util.Execute_Notification_Callback(RESPOND, TEST, ABC0124_03, 14361, 120:OWF_MGR)
Wf_Engine.CB(RESPOND, TEST:ABC0124_03:14361, :OWF_MGR:120::)
Wf_Notification.Respond(120, OWF_MGR)
Wfa_Html.SubmitResponse(120)

AppleScript "Syntax Error" notification without errors

Hello everyone and sorry for my bad english. I'm using OS X 10.6.2. I want to learn AppleScript, but every time when I try to run code I get notification "Syntax Error", but there isn't any error:
display dialog "Hello, world!"
Same thing with every code. What can be a problem?

Your script runs fine for me on 10.9, however you don't seem to be targeting any application, it's not an issue, but you can find some weirdness when you run the script in the editor vs as an Application, script or service etc.
tell application "Finder"
display dialog "Hello, world!"
end tell
Try the above, see if that works - Finder should 'come to the front', you can 'compile' the script in the editor which should help confirm the syntax is correct. Are you using AppleScript Editor?
It's worth checking you are using the correct quote types (straight lines vs curly ones), especially when pasting from the web…
Bad
Good
There are a few tutorials around, see if they can help…
http://www.instructables.com/id/Simple-Applescript-Tutorial/
Macscripter seems to be helpful too
http://macscripter.net
P.S. 10.6.2 is a very old version, 10.6.8 is the later version (more stable) use software update to get that installed, it may fix some weird bugs that cause issues like this, run Software update several times until it stops giving you more fixes.

How to set up internet explorer notification script error on Imac

Trying to set up script error notification on my Imac when using internet explorer pages - where / how do I set this up for my Imac?

IE has not been supported by Microsoft on a Mac for years.... I have no clue what you are trying to do.
Barry

Workflow Notification Mailer error

Hi all,
I am logged in Application Manager and it shows that Mailer "Stopped with error".
Service Instances for Generic Service Component Container shown as running.
Here is what I see in Mailer Details:
Definition
     ID          10006          Name          Workflow Notification Mailer
     Startup Mode          Automatic          Container Type          Oracle Applications GSM
     Inbound Agent          Workflow Notification In Queue          Outbound Agent          Workflow Notification Out Queue
     Correlation ID
     Status Information          This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, AUTOCLOSE_FYI=N, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=Y, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=, EXPUNGE_ON_CLOSE=Y, PROCESSOR_OUT_THREAD_COUNT=1, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_6#986$!0# `+$!**^^A8&@^8^00@%!0&B8%B}#A*|^#, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=Process, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=Discard, ACCOUNT=spi\workflow, FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://finappstest01kt.seattlepacificindustries.com:8001/pls/SPIUAT, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=10.0.4.44, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, INLINE_ATTACHMENT=N, OPEN_INVALI
Where do I need to look for a resolution?
Thanks,
Eugene

Hi,
Have a look at the following documents.
Note: 463354.1 - How to troubleshoot 'Validation failed' errors when starting mailer
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=463354.1
Note: 753845.1 - How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=753845.1
Note: 257723.1 - Error SvcComponentContainer
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=257723.1
Regards,
Hussein

Email Notification Syntax Error

I'm having trouble getting Email Notification working using Motion Detection with WebCam Centre.
Updated to .7.02 but still not working.
The problem seems to be the SMTP server setting. When I try and send the test email I get this syntax error:
Syntax error in 'From' header: malformed address: [my_email@my_domain.com]\n may not follow my_email@my_domain.com: failing address is: my_email@my_domain.com[my_email@my_domain.com]
N.B. I've changed the lesser than & greater than characters in above error to square brackets because the forum warned me it was invalid HTML.
I've no idea why it puts \n on the end of my email address, but I'm informed it's a newline character?
The mail server I use doesn't require authentication. I'm using the same SMTP server setting which works fine in Thunderbird or Outlook Express.
If I disable the router/modem and use a dial-up modem with a different ISPs 0845 PAYG, with different SMTP server setting, I can sent the test email successfully.
If I use my ADSL providers 0845 number with their SMTP server setting then it fails. Which suggests the software with WebCam Centre doesn't play ball with my ISPs SMTP server, or it's something to do with the router modem, a Netgear DG834 wired..
TIAMessage Edited by NJW on 06-11-2006 03:06 PM

I wasn't thinking straight when I said it could be my router/modem. It's unlikely to be my router/modem, as I still get the error when using the dial-up account given with my ISP. So it must be their SMTP server or the WebCam software.

To get notification with error's code

Hi everyone,
Database Control
OMS:
OMS_VERSION=10.1.0.4.0
EMAgent10.1.0.4.1
When some error happend in Database, by Notification I just get like this on mail:
Name=test
Type=Database Instance
Host=dba
Metric=Generic Alert Log Error Status
Timestamp=29.04.2008 12:35:03 GMT+05:00
Severity=Critical
Message=2 distinct types of ORA- errors have been found in the alert log.
Rule Name=Database Availability and Critical States
Rule Owner=SYSMAN
but in message just "distinct types of ORA- errors" without code of error like ORA-01550 or any other kind of code.
Is it possible to get distinct code of error in message through Notification ?
Will be glad to any helpfull advice.

DBMS Direct,
But in the post How to be notified for all ORA- Errors recorded in the alert.log file
11iuser complain about that why he/she just get error number without any explain of arrised error.
In my situation I just get "distinct types of ORA- errors" without even any error code.
Perhaps I need to change something in emoms.properties or emd.properties.
By the way I select Message format -- Long Format
Sorry for my poor English

Notification closing error

Hello QM Guru's
User is trying to close a Nitification from QM02 but system is giving error that Outstanding Tasks Exist.But all task are completed & Successful.When I have checked in table QMSM Table system is showing there are 04 entries whereas in QM02 transaction it is showing only 03 tasks that means user has deleted one task.But the task is not completely deleted & hence it is showing the error that "Outstanding Tasks Exist" while user trying to close the notification.
How to remove that entry which is deleted by user as he is not able to close the Notification.
Also we have recently developed a new screen in QM02 transaction at the Item level using User EXIT QQMA0008. We have made the mandatory entries in that Screen.
How to resolve this issue?
Awaiting for your valuable reply.
Thanks
Pravin

Hi Praveen,
Your problem in notification basically related to action box task or the task which you have assigned in notification Task Tab, first close the task, when u close the task status of your notification becomes ATCO, when this task is closed than system allows you to close the notification and ur status becomes NOCO ATCO etc.
I hope u understand check all task in ur assigned Task tab or the action box related tasks .
Regards
Shailendra Gaur
SAP-QM

My Worklist Notification showing error

Dear All
We are running Oracle E_Business Suite r12
I have some problem with My Worklist Notification
when my manager click on "My Worklist Notification"
and go for any PO to approval
There is something called
"References" at the bottom of the page
below References there is " View Document Details "
when he clicks "View Document Details " it gives error like
**You have insufficient privileges for the current operation. Please contact your System Administrator.
Can anyone help me with this.
Regards

Dear Hussien
Thanks for the quick reply.
My I did the changes as per the note Insufficient Privileges Exception When Using the View Document Details/Edit Document Links in the PO Approval Notification [ID 803188.1]
suggested by you but still its the same. Let me brief you the steps exactly.
1) Log in using System administrator responsibility
2) System administrator --> Security --> Responsibility --> Define
3) Query the Responsibility (FT Employee Self Service) thats the resposibity used to approve.
4) Copied Menu "FT ESS Menu" from the page
5) went to Application -> Menu
In the 'User Menu Name' field, query the Menu name "FT ESS Menu"
6) Assign the submenu "Purchasing Buyer Work Center"
Save changes
Regards
Musaddaq

Push Notifications Disabled (error 400)

I'm getting this error whenever I open my ESPN Streak for the Cash app. I've contacted ESPNs customer care and they are saying my error is an itunes/iphone issue.
The problem:
I purchased a separate service within the app to send me additional push notifications. When asked to enter my itunes password to confirm i did. This was actually the second account I tried doing this from and it worked on the first. I've heard that you should have separate itunes accounts for each iphone. I dont know if that was the issue or not, but I did create another itunes account and deleted the app and redownloaded and purchased the push notification service. I still get the error 400, but at least it says my subscription is pending now whereas it didn't register before, but still no pushes. I've also noticed for some of my other apps that i dont receive push notifications anymore. Chess with friends, facebook, email. It only bothers me because i'm paying an additional subscription service for the espn app and i cant receive push notificaitons.
the actual message reads: Push notifications are disabled or failed to initialize. (error 400: contact customer care)
I am also prompted to enter my itunes password everytime i open the app. I've also received (error 100: contact customer care)before. Don't know if any of this could be useful info. But that's pretty much all i know.

I don't know where your other reply went re: turning off push notifications and that this appears to be a problem for 4s users.
Anyway, thanks for the reboot suggestion, tried that as well. I will try to turn off push notifications and then turn back on to see if that makes a difference.

Touchsmart 9100; error 0x80072ee4; troubleshooting wizard error; system event notif. svc. error

HP Touchsmart 9100 all-in-one
Windows 7 professional
First I get a window that says
failed to connect to a window service --windows could not connect to the system event notification svc. This problem prevents standard user from logging into the system. as an administrator you can review the system event log for details about why the service didn't respond.
Windows help and support cant start. There is a problem with Windows Help and support. To view our online help content visit windows website;
The Internet is not available and the troubleshooter does not work. I get this error when I try to connect to Internet;
ERROR 137 (net::ERR-NAME-RESOLUTION_FAILED) unknown error
I cannot run any diagnostics. I get this:
An error occurred while troubleshooting. Then it says Diagnostics troubleshooting wizard has stopped working. A prooblem has caused the system to stop working correctly. Windows will close the program and nootify you if a solution is available.
I get this window:
Package ID: Performance Diagnostic
Path; Unknown
Error Code; 0x80072ee4
User;
Context: Restricted
I restarted with the same result.
I tried to do a startup repair and it said no problem was detected.
Yesterday I had a problem where the cursor moved but nothing was clickable. I could not detect a problem, so I did a system restore to oct. 1 and it seemed to work. The only thing added yesterday was malwarebytes. I scanned with that program and removed one item, but I cannot remember what it was.
I ran an AVG virus scan and it detected no viruses.
I have the same issues in safe mode.
When I go to services.msc it says it is "starting" and I cannot restart it.

Hello sallatticum:
Welcome to Hp's forum . This link is how to correct your error. How it works on a business computer that I do not because you have a total different operating system then home users computers do. http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-code-0x80072ee4-and-the...
You need to goto the HP's Business Support Forum with your computer issues. Next time or if this fix did not work for your issue. http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271 Please click on Kudos if this resolved your issue. Thank you frrw.

Integration Directory, Cache Notifications with error

Guys,
In Integration Directory, I create one Comunication Channel, but, when i actived one, it dosnt appears in RWB Comunication Channel Monitoring.
In Integration Directory -> Environment -> Cache Notifications, show the following error:
Integration Server (Central Adapter Engine) | Directory Change List | pisuper | Standard Change List
With "Standard Change List" as: Not Yet Started
Details: Never change Status.
Can anybody help me?

Also check in SLD technical system for Exchange Infraustructure.
Check weather Adapter enginer is registered or not.
Your XI domain should contains 6 entries
1.Adapter engine
2.Domain
3.Integration Directory
4.Integration Repository
5.Integration Server
6.RWB

Notification Mailer Error

Hi
We are upgrading our system to linux. Problem we are getting is whenever we clone our system, notification mailer is giving error. When I submit the timesheet, I am getting the following error in the mail
Error
Your session is no longer valid or your logon information could not be reestablished from your session.
Any faced a similar issue. Do i need to do something extra at the time of cloning for notification mailer

I have gone through all the finishing tasks of the cloning and updated all the workflow related tables and restarted services but somehow a dynamic xml is not generated. That is the reason why we get the error. Mailer, CM are all fine. The error is still showing up in the notifications sent.
Your session is no longer valid or your logon information could not be reestablished from your session.

Notification Procedure error

Hi,
Oracle 8.1.7.3 Enterprise Edition.
/* Create Message Object */
CREATE type aq.Message_typ as object (
Subject VARCHAR2(30),
Text VARCHAR2(80));
/* Create Q Table. */
EXECUTE dbms_aqadm.create_queue_table (
Queue_table => 'aq.Test16_09_tab',
Multiple_consumers => TRUE,
Queue_payload_type => 'aq.Message_typ');
/* Create queue: */
EXECUTE dbms_aqadm.create_queue (
Queue_name => 'aq.Test16_09_q',
Queue_table => 'aq.Test16_09_tab');
/* Start a queue */
EXECUTE dbms_aqadm.start_queue (
queue_name => 'aq.Test16_09_q');
/* Create notification Procedure */
CREATE OR REPLACE PROCEDURE PR_NOTIFICATION (CONTEXT RAW, REGINFO SYS.AQ$_REG_INFO, DESCR SYS.AQ$_DESCRIPTOR,
PAYLOAD RAW, PAYLOAD1 NUMBER)
AS
DEQUEUE_OPTIONS DBMS_AQ.DEQUEUE_OPTIONS_T;
MESSAGE_PROP DBMS_AQ.MESSAGE_PROPERTIES_T;
MESSAGE_HDL RAW(16);
BEGIN
/* code */
NULL;
END;
When I attempt to compile the callback procedure an error is thrown asking to declare SYS.AQ$_REG_INFO. It simply doesn't exist when I look at DBA_OBJECTS in the SYS schema.
Any ideas as to what's happened would be greatly appreciated.
Thanks

This is what it says on my system:
SQL> show user
USER is "SYS"
SQL> desc AQ$_REG_INFO
Name Null? Type
NAME VARCHAR2(128)
NAMESPACE NUMBER
CALLBACK VARCHAR2(4000)
CONTEXT RAW(2000)
SQL> select object_name, object_type from all_objects where object_name = 'AQ$_REG_INFO' ;
OBJECT_NAME OBJECT_TYPE
AQ$_REG_INFO TYPE
1 row selected.
I think you are missing the GRANT on this TYPE to the user under which you are compiling the callback
procedure.

Notification print Error message :- No entries were found in the Cataloge T

HI All ,
when printing the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also , but when i am going to Pint the notification i am getting the error message like no entries were found in the cataloge T.
Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
Regards
piyush

resolved throgh debugging , the short text & long text is not maintain for the Catalouge.

PO Notification Summry Error

Similar Messages

Maybe you are looking for