Po number not fetching with query while showing on form?

hello all,
i create a po and save my work. as i know that base table is po_headers_all
when i query po from form , is showing . but with following query there is no record
select * from po_headers_all where po_header_id=1704;
note: po is just save but not submit for approval.
Thanks
yash

maybe you are querying on the wrong column?
try:
select * from po_headers_all where segment1='1704';

Similar Messages

My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when connected

My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.

Hey Biglou1,
Thanks for the question, and welcome to Apple Support Communities.
I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano3gen/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

I am trying to send a text message from my iPad when I enter phone number I get error message phone number not registered with iMessages from contacts

When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.

TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage.

IPad won't send message to number "not registered with iMes age" but iPhone 4 does! Why...

I often send and receive texts from my brother (who has a T-Mobile phone) but when I tried to send message to him with iPad2, it refuses and send "number not registered with iMessage" response. Now my iPad sends and receives me.ssages just fine with my and family member iPhones and iPad. What the **** is going on?

You can only send a Message on your iPad to another iOS device. Your iPhone, however, will convert the Message to a text message that can be received by your brother. This has to do withe the fact that the iPad is not a phone.

Charging not supported with this accessory shows up on my iPad. The cable seems to be broken at the connector. Could it be that I need a new USB cable?

Charging not supported with this accessory shows up on my iPad. The cable seems broken at the connector. Could it be that I need a new USB cable?

Yes, but should be covered under the warranty of your device (or any device under warranty using that cable) just bring it into the store.

Error occured while showing adobe form in abap webdynpro application

Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP

Hi Arjun ,
            Thanx for ur reply ,
            i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
        and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
       if m_version is initial.
88
         m_version = m_pdf_object->get_version_info( ).
89
       endif.
90
       if version < ''.
91
         set_usage_rights( m_pdf_object ).
92
       endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
      set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
      execute, call ADS
104
m_pdf_object->execute( ).
105
106
      get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
|    imported into interactive forms.(201501).

Rollback segment number not shown with name " not shown " too small

Hi,
we have a table TABLE1 with a BLOB field FIELD1 on a Oracle 10g database. Today we found out that there is one record in that table that make problems. if we try to read the BLOB data from that record, Oracle shows the error:
ORA-01555: snapshot too old: rollback segment number with name "" too small
The strange thing about it, that the message shows neither the segment number nor the segment's name. Like it has lost the reference to it.
Could you help please.
Notes:
The TABLE1 and the BLOB data are really not big.
The UNDO tablespace is 2Gb big and just 1% used.
Thank you very much
Igor

Out-of-row LOB undo is maintained in the LOB segment. So the UNDO tablespace and undo retention is not associated with most LOB ORA-1555 issues. Instead the LOB column is created using either PCT_VERSION or RETENTION to manage how much space within blocks or time transpires before the LOB undo is overwritten. In environments with high updates, deletes on rows including LOBs, the chances of ORA-1555 on LOB undo is very high.
Source:http://blogs.oracle.com/db/entry/troubleshooting_ora_1555
In the above link you will get plenty of good metalink notes to understand and solve the issue.
There is no undo segment name in the error message means this error has no relation with undo tablespace/parameter/segment. This might mean that your LOB table is corrupted. Can you drop and recreate/re-populate this table and try again ?
Srini Chavali @ Another "snapshot too old: rollback segment number with name "" too small"
Regards
Girish Sharma

IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it. I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
Please, I would absolutely love the help, i'd be eternally grateful for it.
-Tyler

Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

Contract number not appearing in PO while converting PR into PO using ME21N

Hi SAP MM Experts,
We are having scenario as Demand PO  SOPRHub PO. We are creating demand PO for company code 1700 by setting massage type ZYT1 in that because of which SO got created through Idoc. In that SO, PR is updated. This is the Hub PR which is created automatically for hub plant 4511 & company code 4500. In this PR, on source of supply tab contract & vendor are appearing as required. When I am converting this PR in PO using ME21N the contract number is not fetching into PO though it is there in PR. This is the issue.
I know the source list (ME03) having multiple sources & contracts so that I need to follow 2 steps as:
1) We need to fix the vendor in source list
2) In change mode of PR we need to assign source manually by clicking on u2018Assign source of supplyu2019 button.
But avoiding these two steps, how can it possible to fetch contract number into PO from PR.
Any pointers in this case will be great help for me.
Thanks in advance.
Regards,
Sachin Patil

does the item in your contract have a different item category or accounting category than in your PR/PO?

Restored Ipod now Itunes will not sync with Ipod music shows to be in library

Restored ipod, now Itunes will not sync with ipod, music still shows to be in my library. Ipod does show to be under a new name. How do I get the music back on ipod. note Ipod is classic modle

Hello Cobre,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning syncing:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Wireless keyboard not pairing with IMac while mouse

I am having trouble with the wireless keyboard entering my password when booting up. It will not let me enter any characters. My wireless mouse & trackpad seem to work fine. Right now I am submitting this issue through my Ipad (3rd Gen) using the same keyboard that will not pair with my IMac. I called Apple tech yesterday and he had me remove the new batteries from the keyboard and depress the power button for one minute, then replace the batteries and power up the Imac. That solution seemed to work yesterday. Last evening i shut the machine down and tried to start today and had the same issue. The keyboard is working fine with this Ipad and had no trouble recognizing it on bluetooth. Has anybody had this same problem, I was considering purchasing a USB apple keyboard until I tried the keyboard with a different device (my ipad)

How did you get on? My brother is having a similar problem, he bought a replacement wireless keyboard which is not recognized by/paired with his iMac and thus he can't login..

SQL Developer not fetching data tables while writting query

HI , I have recently started using SQL developer 2.1, the problem i face is that SQL DEVELOPER is not showing the tables names while writting the query, we have more than 5000 tables and each table name cannot be remembered.
Thanks
Essa

I'm using the Mac version of SQL Developer (Version 2.1.1.64 | Build MAIN-64.45) and I'm having similar problems. I'm currently using OS X Snow Leopard.
The issue does not happen consistently: If I start writing an anonymous block in a new SQL window, the Completion Insight features works well. I can start typing a name of a package (of which there are many in our db) and I'm quickly provided a list matching what I've typed so far. This is also true of variables, functions and procedures within the packages after I type a period following the package name.
However, if I open an existing package body and start editing, the Completion Insight feature becomes less reliable. If I move my cursor to the beginning of the main block of one of the package body's internal procedures, Completion Insight works. As I move down the package and try to insert new code, Completion Insight stops working. I should note that this package body I'm working with has no errors and compiles fine. I'm not sure what this indicates...whether it's an issue with the editors internal parser or some other issue.
I'm not sure the best method for starting SQL Developer via the console window on the Mac. I found the following sh file which does launch it from terminal:
/Applications/SQLDeveloper.app/Contents/MacOS/sqldeveloper.sh
This does launch the application. As I navigate around and follow the instructions you had given (including ctrl-space) I see no output generated out to the console (errors or other messages).
I'm happy to assist in further debugging. Having Completion Insight work consistently will certainly increase my productivity with the tool.
Thanks in advance for any help you may provide.

New E-mail Badge number not updated with new mail in folders (iPhone 4S)

I setup my exchange e-mail to push certain folders as well as my inbox but only my inbox mail will update the badge number. If I get mail in a folder the phone just vibrates and shows the notification but the badge is not updated. Seems kind of pointless to have the mail pushed if the badge isn't updated as well. Is there a way to change this or a reason why it is not updating? And yes I have all the options to allow the badge to be shown, also show in notification center, show in lock screen, etc. It was working with 7.0.3, but after I updated it, I realized it stopped working. Any ideas?

So i pretty much got ticked at my iphone. Not only was my "sent folder" not updating, the new 2.0 was crashing and hanging all my applications. e-mail photos wont send, got error messesges , at least every application crashed at some point in the last week, even after i did a restore and back-up. SO pretty much i restored to factory out of the box settings and just started as a "new iphone".
as for the whole "sent folder" not updating. I changed the setting to download "Last 200" messeges. Then i kept updating until all 1,000 messeges were downloaded. After that point my iphone would update whenever i sent new messeges. But it would take forever cause it was checking against a 1,000 e-mails for new ones.... SO i give up, i just dumped all my "sent e-mails" to a new folder called "sent archives" ( u can call it whatever u want). I think this is the easiest fix for now.
if i get any more issues.. i'm just gonna go restore my phone back to the software rev before 2.0 came out....
so

Iphone contact's phone number not synced with Outlook

Hi,
I have a contact with 4 phone numbers. That contact syncs with outlook in most cases (e. g. a change in a "note" is transfered both ways correctly).
But: The "private" phone number never shows up in Outlook.
I already reset the sync history.
Any other ideas are warmly appreciated!
Ulrich
PS. Itunes syncs with Outlook 2007

Well, I fixed it myself. In Outlook, I checked each appointment for a bad reminder time. My default time is 30 minutes. ONE entry showed 0 minutes. I changed it to 30, synced, and lo and behold, I have my calendar back! I can't believe that is all it took.

Serial number not working with upgrade from production studio

I have an old WinXP with the first Adobe CS Production Studio Premium that I've been using for more than six years.
I recently had to reinstall my system and now I have an install error with serial number. The Prod Studio Prem is an upgrade
to the Video Collection Standard. It errors on the screen when it ask for the previous version of AfterEffect and Encore.
I had this issue before. Adobe support provided me another number and it worked.
The odd thing about it is the install asks for AE 3.0 or later and I have AE6.5. It also asks for Encore 1.0 or later and I have Encore 1.0 & 1.5. If I can remember back several year when I called ADOBE support they said even though I qualified for the upgrade the issue probably was with the previous AE standard serial number wasn't working in the install screen. I've lost the new serial numbers now and I'm unable to reinstall.
I'm not upgrading until next year. How can I get this working until then?

if you don't have the old version installed you'll be prompted for both the serial number of the old version and the upgrade. you have to use the correct serials when prompted.

Po number not fetching with query while showing on form?

Similar Messages

Maybe you are looking for