PO print mesage ?

Hi experts,
When i print PO directly in the PO view mode with PRINTER ICON . i am getting PRINT .
but after that PO MESSAGE icon inside message status still in YELLOW colour.
if print with ME9F its changing to GREEN colour Indicator. so that i can do for next step for REMINDERS with t code ME91F.
but my client wants to get this GREEN indicator in the first step only ( when they print with PRINTER ICON on ME23N or ME22N)
is it posible . is there any settings behind.
Thanksin advance,
Anthyodaya.
Edited by: anthyodaya Reddy Nagaram on Apr 13, 2010 6:46 PM

I am getting print out with ME23N, ME22N   print ICON clicking ..
but in the print mesage not changing to GREEN colour.
if i maintain in Tcode :- NACE - purchase order -   Condition Records - ZEMA Purchase order -- Purchasing outpu Determination:Document Type - Purchasing Doc. Type   -    (DATE/TIME = 4 Send immediately (when saving the application) )
that time i am getting Green colour. but if i maintain 3 Send with application own transaction   i am not getting green indicator after printing also.
when i get this greencolor then only i can proceed for next step for REMINDERS ME91f .
Thanksin Advance,
NAR

Similar Messages

Mail / pages / numbers quit unexpectedly while using the BJPDELocalizedString2 plugin in Word for mac a error mesage comes up when trying to print "Error, no pages found/file name"

Mail will not print, pages will not print . . . pages / mail quits unexpectedly while using the BJPDELocalizedString2 plugin. Tryed in Word for Mac. . .Error message; no pages found / filename This all happened when I unstalled brother P-touch.

Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.

Error mesage when printing with lexmark Z1420 WIFI

I have installed printer Lexmark Z1420 Wifi.
when I try to print from any application, The following error box appear:
"l'application xx s'est fermée, il se peut que le problème soit provoqué par le module IJPrintQuality"
I have deinstalled and reinstalled the lexmark driver on internet.
I use a direct airport wifi connection from the computer to the printer.
the printer wifi light is green.
I have reinitialized all the print list without any success
I have never installed other printer o this computer, this is the first one
any idea to help me.

This link should help:
http://discussions.apple.com/thread.jspa?messageID=6119112&#6119112
"The temporary fix for this, until Lexmark provides a workaround, is to remove or rename the IJPrintQuality.plugin in /Library/Printers/Lexmark/PDEs."
Lexmark released a patch for this problem, so you should check their website to see if there is an updated driver for your Z1420.

"error while printing" when saving

A really odd thing started happening today: when I hit Apple + S to save a document, it first pops up the save progress box, but after a few seconds a 2nd box appears with a mesage saying "Print. error while printing."
I'm just trying to save, not to print. Any ideas what's going on?

on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
PMSessionValidatePrintSettings failed (error code = -50)
Invalid PMPrintSettings in print info
this same n-s-p works fine on my g4 powerbook, also 10.4.11...
and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

MY HP DESKJET 697C PRINTER WILL NO LONGER PRINT???? - HELP!!!!!

My HP DeskJet 697C Printer will no longer print!?
1. First, a mechanical bang noise comes from inside the printer.
2. Next, the top over the "ON" switch yellow light blinks!
3. Finally, the following on screen Error Mesage reads:
"Your HP DeskJet 697C Printer has Failed to Print!"
No reason is Given!
But I suspect, something inside the printer has malfunctioned since there is a one singular "Bang" Noise
each time I attempt to make a Print!..As if the sliding on the chrome rail ink cartridge was obstructed by something blocking its full back and forth movement during the printing process!?
HELP!
DFIX9
9-12-11
2:40 pm.

Try resetting the printing system.
OS X Mavericks: Reset the printing system
If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Network Printer Troubleshooting
HP – Wireless Printing Center
HP – Printer Not Found During Wireless Installation

10.9.1: Mail 7.1 screws up Print layout / formatting

Mail 7.1 in Mac OS X 10.9.1 screws up the layout of Messages you try to Print.
The two most common symptoms are that:
1) Blank space is inserted after the Headers and before the first line of the body of the message, so that the body of the message starts on the 2nd page. These are apparently blank lines (not a Page Break) because if you reduce the scaling below 100% the body of the message starts to show on the bottom of the 1st page, but still with a large chunk of bogus, blank space between it an the headers. And,
2) Extra blank pages are printed at the end of the message. This could be 1 to several blank pages. The number of extra blank pages is constant for each message, but differs between messages. These DO appear to be Page Breaks -- not simply a large chunk of blank lines.
These problems happen regardless of which printer is selected -- even happening if you Print via "Save As PDF".
These problems are NOT cured by Resetting the Printing System and then re-installing the printers.
For problem (1), the error seems to be uniquely associated with the use of "US Letter" Paper Size -- and only when used in Portrait orientation. If you switch to Landscape orientation, or if you use Portrait orientation with either US Legal Paper Size (which is larger) or A4 Paper Size (which is smaller) the bogus blank space after the Headers goes away.
However, problem (2) is NOT altered by switching either Paper Size or orientation. You still get the same number of bogus, blank pages at the end.
So far, I've only seen problem (1) when attempting to print Messages saved in my Sent folder. Problem (2) appears both with messages in the Inbox and Sent folders.
These problems only ever appear when the Message is printed. Messages viewed on screen have no such issues. The print formattting problems appear regardless of whether you Print the Message directly from the list of Messages in the Mail folder, or if you first double click on the Message to open it in its own window and THEN Print it.
Note that I have "Organize by Conversation" *NOT* selected in the view menu, so Reply and Forward messages include the prior text attached at the end -- forming one, longer Message. However, both problems (1) and (2) are exhibited on Messages which are comprised of a single Message *AND* Messages which included embedded text from prior Messages in their Reply or Forward chains. NOTE: Problem (1) only seems to show between the FIRST Headers and the start of the Message body -- not between any embedded Headers and the following text of their attached, Reply or Forward content.
Both problems also show both on Messages with attachments and Messages without attachments.
Has anyone found a way to cure these two problems?
Of course you can workaround problem (2) by adjusting the Print dialog to only print the non-blank pages. And you can kinda sorta work around problem (1) by selecting a Paper Size other than US Letter and then making judicious application of scaling in the Paper Handling sub-portion of the Print dialog, but these are manual steps you need to do DIFFERENTLY for EACH Message you want to print.
Deep sigh....
--Bob

I should add that these Print formatting issues do *NOT* show on every Mail 7.1 message in Mavericks 10.9.1.
So far, I've not been able to ferret out just what it is about a Message that cause Print formatting to screw up. Things I believe I've ELIMINATED include:
1) Newly created Messages vs. old Messages.
2) Messages with or without attachements
3) Messages with or without signatures
4) Messages which include prior Messages in a Reply or Forward string, or not (i.e., single, original Messages)
5) Mesages with multiple recipients or not or with CC: recipients in the Header or not.
However this problem is by no means "random". Any Message that shows one of the Three Problems I've detailed above will exhibit that Problem every single time you try to Print it. Any Message which Prints cleanly, will continue to Print cleanly every time as well. So there is SOMETHING about the data in the failing Messages which is triggering this problem.
One new behavior I've noted is that for some Messages a new notice appears on screen -- briefly -- the first time you try to Print them. It appears so briefly that I may have the exact text wrong, but it is something like "Generating Print Content". I'm beginning to suspect the Printing problems show ONLY on Messages that need to go through that "extra step" the first time you try to Print them. But I don't know what that Message implies -- i.e., is there a new, "printable" file being generated by Mail specific to that Message which might persist across different Print attempts? If so, the error may be due to how THAT file is created.
This new notice only seems to appear the FIRST time you try to Print a Message -- and evidently not on every Message (or pehaps it is so brief on some Messages that I just don't see it).
--Bob

Has anyone updated the software for 10.6 Snow Leopard and found that their printer no longer scans or prints?

Last October, I bought a MAC desktop that uses MAC OS X 10.6.8 and an HP 1050 All-in-One Printer J401a.
Everything worked beautifully until messages kept popping up about downloading critical MAC software update. Eventually, I succumber to the persistence and took the 7 hours required to do the download.
Since then, the printer refuses to scan. A mesage informs that "HP Utility quit unexpectedly" and a report is being sent automatically to Apple.
A few days ago, I got an engineer to have a look. He re-ran the HP disk 3 times and managed to get the scanner to work, but only once. His second visit did absolutely nothing and now even the printer doesn't work.
HP informs that this is a problem with MAC OS X 10.7 and suggests downloading a correction.
Has the Apply update turned the 10.6 to a 10.7?
I have un-installed HP and disconnected the printer.
What can I do to get this important facility back?
Lis

Elisabeth Cumine wrote:
Thanks for the reply.
Even after the 7 hour update download the MAC OS X still says version 10.6.8 and nothing appears to have changed except printer and scan errors. I've uninstalled HP after 3 futile reloads and disconnected the printer.
Any suggestions?
Lis
Right 10.7 is a purchase of a new oeprating system. Software update will not upgrade your computer to 10.7.
The Software on the disk is very old software. Ushally it's a good idea to download the latest software from HP. As such, have you tried downloading & Installing HP Deskjet Full Feature Software and Drivers - Mac OS X v10.5 and v10.6?
You may need to go into system prefrences, Printers, and delete the printer, and then re-add the printer.
When opening the scanning software; it's really important to open the right program. If you look in the HP software folder there should be sevreal programs. There should be a program called scanner select or some thing similar. That's the one you want to open. it will have you select the device you want to scan from; then it will give you the option to open the scanning program.
if that dosen't work, do you have any other mac or pc computers? the reason I ask; is that the printer could be having a hardware issue. if you try the scanner / printer with another computer; and you still have the issue, then you know it's an issue with the printer it self and not your computer.
My HP all-in-one scanner died about 8 months into owning it. I couldn't even use the built-in copy button on the printer to make copies.

HP Officejet Pro 8500A Plus printer is stuck in maintenance mode

I have had my 8500A for over 6 months without incident, but tonight it suffered its first paper jam -- and though I removed all visible paper, the error message said I still needed to open the access and clear the jam. I thought a reboot might help so I turned off the power and after a few seconds turned it back on. I got a message saying the printer was checking itself and that this might take a few minutes. I let it run for literally 2 hours with this same message showing before pressing the red X on the control panel to try and exit this mode. Now I have an error mesage saying "maintenance cannot be interrupted" and the printer remains frozen. Any ideas on how I can get it to operate again?

I am sorry that no one saw this to respond sooner, but I am going to see if there is anything I can do to help.
First, we are going to try to do a specific type of reset. What I want you to do is open the printer and remove the ink cartridges as well as the print head from the machine. The print head should have a lever on the right-hand side that will lift up to release it.
Once these are all removed from the machine, unplug the printer from both the back of the unit and the wall outlet for thirty seconds. Then plug the machine back in and wait for the error message for a missing/damaged printhead. Now replace the pinthead in the machine and close the top. When the machine indicates that the ink cartridges are likewise missing/damaged, replace those too in the machine.
Here, if you all goes well, the machine should re-enter its diagnostics and initialization.
Additionally, here is a little information on resets: http://h30434.www3.hp.com/t5/Other-Printing-Questions/Printer-Resets-What-You-Should-Know/m-p/234739...
Let me know how this goes!

Error in Printing with Adobe Reader 11.0.2

I just upgraded Adobe Reader from X to XI on my older Windows XP desktop. When I opened a PDF file and tried to print it, I got a pop up box saying: Prop Res DLL Not Loaded with an OK button. I could not get rid of the error mesage until I closed down Adobe Reader repeatedly. Version X worked correctly so I uninstalled XI and resinstalled it from Adobe's Reader Web Site but stiull get the same error. Any suggestions?

I did go to the HP website, downloaded the latest drivers, and corrected the problem. Thanks for the help.

Unable to print pages directly from internet explorer 9 script error 2126

HP photosmart wireless b109n-z
computer Packard Bell One Two L5861 64bit
I am unable after going to many forums where it seems to be quite a problem and trying different ways to try and rectify a error mesage
An error has occurred in the script on this page
Char 1
Error Unspecified erroCode 0
URL: res://ieframe.dll/preview.js
do you wish to continue running scripts on this page?
yes no
I also have avio laptop which i have no problem with printing on the same printer
I have checked internet option advance settings and both have the same boxes ticked
i have ticked and unticked boxes reset internet unstalled and reinstalled printer
I can save most pages to documents and then print from there this depends on whats in the page
The only thing that seem to make any difference was to untick the internet option security enable protection mode which would ineffect leave my computer vulnerable to attacks which is not advisible
would be very pleased to hear if this can be resolved
many thanks

tejo11,
Script errors like this can happen with IE and while uncommon are not unheard of. With the print and scan doctor coming back fine we can move to troubleshooting the browser where the error originates. If you would like try using a different browser as a temporary workaround and use this microsoft guide for troubleshooting the script error you are getting: http://goo.gl/k7aTU
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

IE8 crashes printing to Acrobat 9 from Yahoo message

Anyone who belongs to a Yahoo list area is probably familiar with the print command to print a message either to a printer or to Acrobat (this is not the print command at the top of IE to print the whole page). With IE7, I had no problems printing to PDF. With IE8, printing to Acrobat crashes IE at the point where the window comes up showing the folder structure on the local drive and a generic filename for the PDF. The cursor blinks at the highlighted filename but IE is frozen. I can't overwrite the filename, change folders or cancel the print. I have to use Task Manager to kill the app. Oddly enough, an error message comes up and says I can't kill the process because the system is waiting for a User command - a command I can't execute because IE is frozen. I assumed this is an IE problem but there were no answers in an MS forum except to upgrade Acrobat. I upgraded to Acrobat Pro 9.1.1. Same problem.
The reason I put the question here is that I can print the mesage to a local printer, just not to Acrobat, so it looks like a compatibility problem.
Any hints except restoring back to IE7? If this were a valid option, I would restore my Vista Business 32 system back to XP. For what it's worth, I installed IE8 because of security problems with Vista and IE7 per MS.

I have found this to be a problem with any web page that has a print command. The solution I have found is to open task manager, go to the process tab, kill the "acrotray.exe" process. This removes the locked "File|Save" dialog box. Then with the printer friendly formated window open I choose the print command from IE (or use the CTRL-P short-cut if there is no menus) and the "File|Save" dialog opens again this time not locked and I can save the PDF to a file.
This solution will not work if the embedded print command does not first display the printer friendly output in a window, but only presents the dialog boxes. In that case there is no work around.
I have looked all over the Adobe and Microsoft sites and although I can replicate this issues 100% of the time, there appears to be no discussion or solution other than your post of the problem.
I have opened a support case with Adobe, but I am not holding my breath.
Good Luck.

I get blank printouts when printing from Firefox (see details) anyone know how to remedy this.

I receive the following error mesage when clicking on the properties button within the 'print' dialogue box "Function address 0x0 caused a protection fault. (exception code 0xc00000005) The application property sheet pages(s) may not function properly."
When I attempt to print any pages from Firefox, the printer goes through the motions and seems to print every word but no ink touches the paper, I just get blank printouts. Printing from all other web browsers and desktop apps is just fine (Lexmark P3150, Win XP SP3).
Anyone know how to resolve this??

Hi Justinescc,
The bottom of this article contains some steps you can try if you're unable to AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
Cheers,
- Ari

In ME22N change when I click on Print button system should generated messag

Hi Gurus,
Once I take the PO print next time when I go to ME22N when I click on print button system should generate the message with out clicking the repeat output.
next time when I want take the print with out clicking the repeat output in ME22N when I click on print button system automatically generate the output message.
For that what are the settings need to be setup.
Thanks in advance
sapmm

Hi ,
If you dont want message to be generated during PO change.Change the following setting.
For eg. u have message type ZNEU.
SPRO-MM-Purchasing-Mesages-Output control-message type -click Define Message Types for Purchase Order
click on :Fine-Tuned Control: Purchase Order
Delete the entry for operation 2 , for ZNEU.
Thank you.
Regards
Amar

Stuck seriously in the blue print phase of project--- please help

I am Prabhas, sap XI associate consultant in capgemini. I am stuck in the design phase of my project.I am writing this mail to you for helping me in designing the blue print of my scenario. My scenario is like this.
XI will receive a flat file containing stock data and it processes by transforming the structure and then dump the data to R3 system. The output of XI actually invokes some function modules in the target R3 system which in turm executes some BAPIs for committing some transactions.I am clear with the flow and how to realize the process.But the problem is with the function module written to execute some transactions with the help of BAPI.Suppose for some reason one of the transaction commit is failed and the RFC adapter goes in error.Now the question is after correcting the error if we restart the msg in RFC adapter will it start executing the transaction in which it faced the error or the whole RFC will be executed again.
I hope the problem is clear to you.Please help in getting over this. Thank you.
Regards,
Prabhas

Prabhas,
A few quick questions~
1. How are you maing the RFC call? is it a single RFC call that will contain all the records from the file or are you going to make one RFC call for each record in the file?
The user of Recordsets permessage depends on this factor.
If you are going to make a single RFC call, then you cannot use Recordsets per message if there is some dependency in the records.
><i>You mean to ay that even some of the transactions which were committed before the error, we can undo them in RFC. If it is so i am clear with the point.</i>
Well if all records are going to be pushed into a single RFC call, then yes, your RFC code should be such that if there is some error whileprcoessing the call, it should be able to undo the same!
If it is the other option where you are going to make one rfc call per record, the issue will not arise, if there is some error, you can correct the same and restart the mesage from XI .
Regards
Bhavesh

Cash Desk Printing

Hie guys,
When i run transaction code FPCJ for cash desk, on request to print the receipt the error message 'Enter at least one Business partner Number' is shown although on the initial screen you would have entered a business partner number. I tryd debbuging and lost along the way but the mesage class is R11 and message number is 123. Any assistance would be appreciated and rewarded

in rectifying the error i was encountering i looked at the following areas.
Printer Definitions
Printers were not defined adequately in the system and because its an upgrade system they had to be reimported and redefined.
Application Form(Customizing)
After the printers were defined, a standard application form was tested and the error was not encountered, however because of the clients special needs some customizations had to be done on a copied application form.
Output Form
Because the client wanted to print receipt with a receipt printer the use of larger printers would result in errors thuis there was a need to define receipt printers in the system that accomodated the smaller page format of the output form.

PO print mesage ?

Similar Messages

Maybe you are looking for